• Shopping Cart
    There are no items in your cart

IEC 60383-2:1993

Current

Current

The latest, up-to-date edition.

Insulators for overhead lines with a nominal voltage above 1000 V - Part 2: Insulator strings and insulator sets for a.c. systems - Definitions, test methods and acceptance criteria

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Language(s)

English - French, English, French, Spanish, Castilian

Published date

20-04-1993

€41.59
Excluding VAT

SECTION 1: GENERAL
1 Scope
2 Normative references
3 Definitions
    3.1 Insulator string
    3.2 Insulator set
    3.3 Flash-over
    3.4 Dry lightning impulse withstand voltage
    3.5 50% dry lightning impulse flash-over voltage
    3.6 Wet power-frequency withstand voltage
    3.7 Wet power-frequency flash-over voltage
    3.8 Wet switching impulse withstand voltage
    3.9 50% Wet switching impulse flash-over voltage
4 Electrical values which characterize an insulator or
    an insulator set
SECTION 2: TEST PROCEDURES FOR ELECTRICAL TESTS
5 General requirements for high voltage tests
6 Standard atmosphere conditions and correction factors
    for electrical tests
    6.1 Standard reference atmosphere
    6.2 Correction factors for atmosphere conditions
7 Artificial rain parameters for wet tests
8 Mounting arrangements for electrical tests
9 Lightning impulse voltage tests
10 Wet power-frequency voltage tests
11 Wet switching impulse voltage tests
12 Methods of mounting
    12.1 Standard mounting arrangement of an insulator
          string or insulator set when switching impulse
          tests are not required
    12.2 Standard mounting arrangement of an insulator
          string or insulator set when switching impulse
          tests are required
    12.3 Mounting arrangement reproducing service
          conditions
Annex A (informative) List of normative documents given
        for information
Annex ZA (normative) Other international publications
         quoted in this standard with the references of
         the relevant European publications

Applies to insulator strings and insulator sets comprising string insulator units of ceramic material or glass for use on a.c. overhead power lines with a nominal voltage greater than 1 000 V and a frequency not greater than 100 Hz. This part of IEC 60383 also applies to insulator strings and insulator sets for use on d.c. overhead electric traction lines. This part of IEC 60383 also applies to insulator strings and insulator sets of similar design when used in substations.

DevelopmentNote
Supersedes IEC 60383 (03/2001) Stability Date: 2020. (09/2017)
DocumentType
Standard
Pages
23
PublisherName
International Electrotechnical Committee
Status
Current
Supersedes

Standards Relationship
PN IEC 383-2 : 1997 Identical
VDE 0446-4 : 1995 Identical
CEI EN 60383-2 : 1996 Identical
I.S. EN 60383-2:1996 Identical
UNE-EN 60383-2:1997 Identical
BS EN 60383-2:1995 Identical
SN EN 60383-2 : 1995 Identical
AS/NZS 2947.4:1999 Identical
DIN EN 60383-2 : 1995 Identical
NF EN 60383-2 : 2015 Identical
EN 60383-2:1995 Identical
NEN 10383-2 : 1995 Identical

UNE-EN 50124-1:2017 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment
CEI EN 61109 : 2009 INSULATORS FOR OVERHEAD LINES - COMPOSITE SUSPENSION AND TENSION INSULATORS FOR A/C/ SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
CEI EN 60437 : 1998 RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS
CEI EN 61952 : 2009 INSULATORS FOR OVERHEAD LINES - COMPOSITE LINE POST INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
I.S. EN 60437:1999 RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS
BS EN 61109:2008 Insulators for overhead lines. Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance criteria
15/30298489 DC : 0 BS EN 50124-1 - RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT
CSA C1325 : 1999 : R2016 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
CEI EN 61325 : 1998 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
I.S. EN 61325:1997 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
BS EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV General requirements. Common specifications
IEC 62497-1:2010+AMD1:2013 CSV Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment
EN 61952:2008 Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
NF EN 61109 : 2009 INSULATORS FOR OVERHEAD LINES - COMPOSITE SUSPENSION AND TENSION INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
BS EN 60143-2:2013 Series capacitors for power systems Protective equipment for series capacitor banks
EN 60437:1997 Radio interference test on high-voltage insulators
04/30108887 DC : 0 IEC 61467 ED.2 - INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - AC POWER ARC TESTS
11/30215604 DC : 0 BS IEC 60913 - RAILWAY APPLICATIONS - FIXED INSTALLATIONS - ELECTRIC TRACTION OVERHEAD CONTACT LINES
BS EN 61467:2008 Insulators for overhead lines. Insulator strings and sets for lines with a nominal voltage greater than 1000 V. AC power arc tests
PREN 50124-1 : DRAFT 2015 RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT
EN 50124-1:2017 Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electrical and electronic equipment
EN 50341-1:2012 Overhead electrical lines exceeding AC 1 kV - Part 1: General requirements - Common specifications
I.S. EN 50124-1:2017 RAILWAY APPLICATIONS - INSULATION COORDINATION - PART 1: BASIC REQUIREMENTS - CLEARANCES AND CREEPAGE DISTANCES FOR ALL ELECTRICAL AND ELECTRONIC EQUIPMENT
ANSI C29.11 : 2012 COMPOSITE SUSPENSION INSULATORS FOR OVERHEARD TRANSMISSION LINES - TESTS
BS EN 60437:1998 Radio interference test on high-voltage insulators
BS IEC 61467:1997 Insulators for overhead lines with a nominal voltage above 1000 V. AC power arc tests on insulator sets
CEI EN 60143-2 : 2014 SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS
CEI EN 61467 : 2009 INSULATORS FOR OVERHEAD LINES - INSULATOR STRINGS AND SETS FOR LINES WITH A NOMINAL VOLTAGE GREATER THAN 1000 V - AC POWER ARC TESTS
CEI EN 50341-1 : 2013 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
NF EN 61952 : 2008 INSULATORS FOR OVERHEAD LINES - COMPOSITE LINE POST INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
IEC 60437:1997 Radio interference test on high-voltage insulators
IEC 61952:2008 Insulators for overhead lines - Composite line post insulators for A.C. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
DIN 40680-1:1983-08 CERAMIC COMPONENTS FOR ELECTRICAL PURPOSES - ADMISSIBLE TOLERANCES
12/30260570 DC : 0 BS EN 50341-1 - OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
I.S. EN 60143-2:2013 SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENT FOR SERIES CAPACITOR BANKS (IEC 60143-2:2012 (EQV))
04/30111295 DC : 0
PD IEC/TS 62896:2015 Hybrid insulators for a.c. and d.c. high-voltage applications. Definitions, test methods and acceptance criteria
BS EN 61952:2008 Insulators for overhead lines. Composite line post insulators for A.C. systems with a nominal voltage greater than 1000 V. Definitions, test methods and acceptance criteria
NF EN 60437 : 2000 RADIO INTERFERENCE TEST ON HIGH-VOLTAGE INSULATORS
I.S. EN 61952:2008 INSULATORS FOR OVERHEAD LINES - COMPOSITE LINE POST INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
I.S. EN 61109:2008 INSULATORS FOR OVERHEAD LINES - COMPOSITE SUSPENSION AND TENSION INSULATORS FOR A.C. SYSTEMS WITH A NOMINAL VOLTAGE GREATER THAN 1 000 V - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
IEC 61109:2008 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
IEC 60143-2:2012 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks
IEC 61467:2008 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
EN 61109:2008 Insulators for overhead lines - Composite suspension and tension insulators for a.c. systems with a nominal voltage greater than 1 000 V - Definitions, test methods and acceptance criteria
PREN 50341-1 : DRAFT 2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
I.S. EN 50341-1:2012 OVERHEAD ELECTRICAL LINES EXCEEDING AC 1 KV - PART 1: GENERAL REQUIREMENTS - COMMON SPECIFICATIONS
11/30245197 DC : 0 BS EN 60143-2 - SERIES CAPACITORS FOR POWER SYSTEMS - PART 2: PROTECTIVE EQUIPMENTS FOR SERIES CAPACITOR BANKS
BS EN 50124-1:2017 Railway applications. Insulation coordination Basic requirements. Clearances and creepage distances for all electrical and electronic equipment
IEC TS 62896:2015 Hybrid insulators for a.c. and d.c. for high-voltage applications - Definitions, test methods and acceptance criteria
CSA C1325 : 1999 : R2011 INSULATORS FOR OVERHEAD LINES WITH A NOMINAL VOLTAGE ABOVE 1000 V - CERAMIC OR GLASS INSULATOR UNITS FOR D.C. SYSTEMS - DEFINITIONS, TEST METHODS AND ACCEPTANCE CRITERIA
I.S. EN 61467:2008 INSULATORS FOR OVERHEAD LINES - INSULATOR STRINGS AND SETS FOR LINES WITH A NOMINAL VOLTAGE GREATER THAN 1000 V - AC POWER ARC TESTS
EN 61467:2008 Insulators for overhead lines - Insulator strings and sets for lines with a nominal voltage greater than 1 000 V - AC power arc tests
EN 61325:1995 Insulators for overhead lines with a nominal voltage above 1 kV - Ceramic or glass insulator units for d.c. systems - Definitions, test methods and acceptance criteria
EN 60143-2:2013 Series capacitors for power systems - Part 2: Protective equipment for series capacitor banks

IEC 60050-471:2007 International Electrotechnical Vocabulary (IEV) - Part 471: Insulators
IEC 60071-3:1982 Insulation co-ordination - Part 3: Phase-to-phase insulation co-ordination - Principles, rules and application guide
IEC 60071-2:1996 Insulation co-ordination - Part 2: Application guide
IEC 60060-1:2010 High-voltage test techniques - Part 1: General definitions and test requirements
IEC 60071-1:2006+AMD1:2010 CSV Insulation co-ordination - Part 1: Definitions, principles and rules

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.