Skip to content
Please enter a keyword to search

  • IEC 60721-3-7:1995+AMD1:1996 CSV

    Current The latest, up-to-date edition.

    Classification of environmental conditions - Part 3-7: Classification of groups of environmental parameters and their severities - Portable and non-stationary use

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Language(s):  English - French

    Published date:  24-10-2002

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    FOREWORD
    1 Scope
    2 Normative references
    3 Definitions
    4 General
    5 Classification of groups of environmental parameters
       and their severities
    6 Sets of environmental condition class combinations
    Annex A (informative) Survey of conditions affecting the
            choice of environmental parameters and their
            severities
    Annex B (informative) Interdependence of air temperature,
            relative humidity and absolute humidity
    Annex C (informative) Examples for practical application
            of the classification specified in this standard
    Annex D (informative) Summary of conditions covered by
            sets of class combinations
    Annex E (informative) Explanation of the environmental
            conditions in tropical areas as specified in
            classes 7K6 and 7K7
    Tables
    Figures

    Abstract - (Show below) - (Hide below)

    Classifies groups of environmental parameters and their severities to which products are subjected during portable and non-stationary use. This consolidated version consists of the second edition (1995) and its amendment 1 (1996). Therefore, no need to order amendment in addition to this publication.

    General Product Information - (Show below) - (Hide below)

    Committee TC 104
    Development Note Also numbered as BS EN 60721-3.7. (12/2005) Stability Date: 2021. (10/2017)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    BS EN ISO 20072:2013 Aerosol drug delivery device design verification. Requirements and test methods
    I.S. EN 60664-5:2007 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 5: COMPREHENSIVE METHOD FOR DETERMINING CLEARANCES AND CREEPAGE DISTANCES EQUAL TO OR LESS THAN 2 MM
    UNI EN ISO 80601-2-61 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
    I.S. EN 50491-2:2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
    PREN ISO 80601-2-61 : DRAFT 2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
    09/30203808 DC : 0 BS EN ISO 80601-2-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    BS EN 60601-1-12:2015 Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
    BS EN 60664-5:2003 Insulation coordination for equipment within low-voltage systems A comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
    CEI EN 60051-1 : 1999 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS
    BS EN 61582:2006 Radiation protection instrumentation. In vivo counters. Classification, general requirements and test procedures for portable, transportable and installed equipment
    96/211436 DC : DRAFT SEP 1996 IEC 60721-3-0 - CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 0: INTRODUCTION AND GUIDE
    CSA Z9919 : 2007 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
    I.S. EN 62282-6-200:2017 FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    PD IEC TR 63040:2016 Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm. Test results of research on influencing parameters
    BS EN ISO 80601-2-12:2011 Medical electrical equipment Particular requirements for basic safety and essential performance of critical care ventilators
    BS EN ISO 80601-2-61:2011 Medical electrical equipment Particular requirements for basic safety and essential performance of pulse oximeter equipment
    IEC TR 63040:2016 Guidance on clearances and creepage distances in particular for distances equal to or less than 2 mm - Test results of research on influencing parameters
    ISO 81060-1:2007 Non-invasive sphygmomanometers — Part 1: Requirements and test methods for non-automated measurement type
    EN 61582:2006 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
    DIN EN ISO 21649:2010-01 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
    EN ISO 21647:2009 Medical electrical equipment - Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 21647:2004, including Cor 1:2005)
    ONORM EN ISO 11608-4 : 2007 PEN-INJECTORS FOR MEDICAL USE - PART 4: REQUIREMENTS AND TEST METHODS FOR ELECTRONIC AND ELECTROMECHANICAL PEN-INJECTORS
    NF EN ISO 21649 : 2009 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    BS EN 60601-1-11:2015 Medical electrical equipment General requirements for basic safety and essential performance. Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
    BS EN 61709:2017 Electric components. Reliability. Reference conditions for failure rates and stress models for conversion
    BS EN ISO 80601-2-72:2015 Medical electrical equipment Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
    NF EN 60664-5 : 2008 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 5: COMPREHENSIVE METHOD FOR DETERMINING CLEARANCES AND CREEPAGE DISTANCES EQUAL TO OR LESS THAN 2 MM
    BS EN 60044-1:1999 Instrument transformers Current transformers
    16/30309512 DC : 0 BS EN 62327 ED 2.0 - RADIATION PROTECTION INSTRUMENTATION - HAND-HELD INSTRUMENTS FOR THE DETECTION AND IDENTIFICATION OF RADIONUCLIDES AND FOR THE ESTIMATION OF AMBIENT DOSE EQUIVALENT RATE FROM PHOTON RADIATION
    08/30168258 DC : 0 BS IEC 62534 - RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL
    PD IEC TR 60721-4-7:2001 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Portable and non-stationary use
    11/30246729 DC : 0 BS EN 62282-6-200 - FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    DIN EN ISO 80601-2-72:2016-04 Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015)
    I.S. EN 60051-1:2017 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS - PROPOSED HORIZONTAL STANDARD
    UNI EN ISO 80601-2-12 : 2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    BS ISO 81060-1 : 2007 COR 2012 NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
    09/30181956 DC : DRAFT MAY 2009 BS ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
    CSA Z21647 : 2007 : R2012 : FR MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    CAN/CSA-C22.2 NO. 80601-2-72:17 Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (Adopted ISO 80601-2-72:2015, first edition, 2015-09-01, with Canadian deviations)
    UNE-EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009)
    I.S. EN 62534:2015 RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL
    UNI EN ISO 80601-2-55 : 2012 MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    CSA C22.2 No. 80601-2-12 : 2012 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    IEC 60051-1:2016 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts
    IEC 80601-2-30:2018 Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
    DIN EN ISO 11608-4:2016-03 (Draft) PEN-INJECTORS FOR MEDICAL USE - PART 4: REQUIREMENTS AND TEST METHODS FOR ELECTRONIC AND ELECTROMECHANICAL PEN-INJECTORS
    I.S. EN ISO 21649:2009 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    CSA C22.2 No. 60601-1-11 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    UNI EN ISO 81060-1 : 2012 NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
    I.S. EN ISO 81060-1:2012 NON-INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE (ISO 81060-1:2007)
    09/30197590 DC : 0 BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    16/30312315 DC : 0 BS EN ISO 80601-2-55 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    14/30296572 DC : 0 BS EN 60601-1-11 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    BS EN 62282-6-200:2012 Fuel cell technologies Micro fuel cell power systems. Performance test methods
    I.S. EN ISO 9919:2009 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
    CEI EN 60664-5 : 2008 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 5: COMPREHENSIVE METHOD FOR DETERMINING CLEARANCES AND CREEPAGE DISTANCES EQUAL TO OR LESS THAN 2 MM
    NF EN 61582 : 2006 RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
    DIN EN ISO 80601-2-72 E : 2016 MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
    I.S. EN 61709:2017 ELECTRIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION
    96/216421 DC : DRAFT DEC 1996 IEC 60721-3-10 - CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 10: STATIONARY AND PORTABLE USE IN MINES
    BS 7527-3.0(1991) : 1991 AMD 8009 CLASSIFICATION ON ENVIRONMENTAL CONDITIONS - CLASSIFICATION OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - INTRODUCTION
    BS EN ISO 81060-1:2012 Non-invasive sphygmomanometers Requirements and test methods for non-automated measurement type
    BS IEC 62534 : 2010 RADIATION PROTECTION INSTRUMENTATION - HIGHLY SENSITIVE HAND-HELD INSTRUMENTS FOR NEUTRON DETECTION OF RADIOACTIVE MATERIAL
    11/30244681 DC : 0 BS IEC 62706 - RADIATION PROTECTION INSTRUMENTATION - ENVIRONMENTAL, ELECTROMAGNETIC AND MECHANICAL PERFORMANCE REQUIREMENTS
    IEC 62327:2017 Radiation protection instrumentation - Hand-held instruments for the detection and identification of radionuclides and for the estimation of ambient dose equivalent rate from photon radiation
    UNE-EN 62282-6-200:2013 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
    AAMI ISO 81060-1:2007(R2013) NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
    BS EN 62534:2015 Radiation protection instrumentation. Highly sensitive hand-held instruments for neutron detection of radioactive material
    UNI EN ISO 20072 : 2013 AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS
    I.S. EN ISO 80601-2-12:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
    CSA Z9919 :2007 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
    IEC 61709:2017 RLV Electric components - Reliability - Reference conditions for failure rates and stress models for conversion
    NF ETS 300019 1-7 : 1995 TELECOMMUNICATIONS - INGENIERIE DES EQUIPEMENTS (EE) - CONDITIONS ET ESSAIS D'ENVIRONNEMENT DES EQUIPEMENTS DE TELECOMMUNICATIONS - PARTIE 1-7: CLASSIFICATION DES CONDITIONS D'ENVIRONNEMENT - UTILISATION EN DEPLACEMENT
    I.S. EN 60601-1-12:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT
    EN ISO 80601-2-61:2011 Medical electrical equipment - Part 2-61: Particular requirements for basic safety and essential performance of pulse oximeter equipment (ISO 80601-2-61:2011)
    EN ISO 80601-2-55:2018 Medical electrical equipment - Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors (ISO 80601-2-55:2018)
    EN 61709:2017 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion
    IEC 60605-3-4:1992 Equipment reliability testing - Part 3: Preferred test conditions - Section 4: Test cycle 4: Equipment for portable and non-stationary use - Low degree of simulation
    IEC 61709 : 3.0 ELECTRIC COMPONENTS - RELIABILITY - REFERENCE CONDITIONS FOR FAILURE RATES AND STRESS MODELS FOR CONVERSION
    BS EN ISO 9919:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
    IEC 62282-6-200:2016 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
    BS EN ISO 21649:2009 Needle-free injectors for medical use. Requirements and test methods
    IEC 60044-1:1996+AMD1:2000+AMD2:2002 CSV Instrument transformers - Part 1: Current transformers
    IEC 60664-5:2007 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
    IEC 61582:2004 Radiation protection instrumentation - In vivo counters - Classification, general requirements and test procedures for portable, transportable and installed equipment
    ISO 21649:2006 Needle-free injectors for medical use — Requirements and test methods
    EN 60601-1-12:2015 Medical electrical equipment - Part 1-12: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems intended for use in the emergency medical services environment
    CSA C22.2 No. 80601-2-12 : 2012(R2017) MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS
    UNI EN ISO 21647 : 2009 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    I.S. EN ISO 11608-4:2007 PEN-INJECTORS FOR MEDICAL USE - PART 4: REQUIREMENTS AND TEST METHODS FOR ELECTRONIC AND ELECTROMECHANICAL PEN-INJECTORS
    EN ISO 9919:2009 Medical electrical equipment - Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use (ISO 9919:2005)
    UNI EN ISO 9919 : 2009 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT FOR MEDICAL USE
    ANSI/AAMI HA60601-1-11:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    I.S. EN 61582:2006 RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
    DIN EN ISO 20072:2013-10 AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009)
    UNI EN ISO 21649 : 2009 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    AAMI ISO 81060-1 : 2007 NON INVASIVE SPHYGMOMANOMETERS - PART 1: REQUIREMENTS AND TEST METHODS FOR NON-AUTOMATED MEASUREMENT TYPE
    PD IEC/TR 60721-4-0:2002 Classification of environmental conditions. Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 Introduction
    I.S. EN ISO 21647:2009 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    CEI EN 61582 : 2007 RADIATION PROTECTION INSTRUMENTATION - IN VIVO COUNTERS - CLASSIFICATION, GENERAL REQUIREMENTS AND TEST PROCEDURES FOR PORTABLE, TRANSPORTABLE AND INSTALLED EQUIPMENT
    13/30264413 DC : 0 BS EN ISO 80601-2-72 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS
    NF EN 60051-1 : 2017 DIRECT ACTING INDICATING ANALOGUE ELECTRICAL MEASURING INSTRUMENTS AND THEIR ACCESSORIES - PART 1: DEFINITIONS AND GENERAL REQUIREMENTS COMMON TO ALL PARTS
    IEC GUIDE 106:1996 Guide for specifying environmental conditions for equipmentperformance rating
    12/30245174 DC : 0 BS EN 60601-1-12 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT
    09/30155521 DC : 0 BS EN 60601-1-11 ED.1 - MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    CEI 56-20 : 2000 EQUIPMENT RELIABILITY TESTING - PART 3: PREFERRED TEST CONDITIONS - SECTION 4: TEST CYCLE 4: EQUIPMENT FOR PORTABLE AND NON-STATIONARY USE - LOW DEGREE OF SIMULATION
    PREN ISO 80601-2-55 : DRAFT 2009 MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    07/30145258 DC : 0 BS ISO 20072 - AEROSOL DRUG DELIVERY DEVICES DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS
    CSA Z21647:2007 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    CSA C60044-1 : 2007 : R2011 INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
    CSA C60044-1 : 2007 INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
    CEI EN 62282-6-200 : 2013 FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    I.S. EN ISO 80601-2-72:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 2-72: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF HOME HEALTHCARE ENVIRONMENT VENTILATORS FOR VENTILATOR-DEPENDENT PATIENTS (ISO 80601-2-72:2015)
    I.S. EN 60601-1-11:2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-11: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS USED IN THE HOME HEALTHCARE ENVIRONMENT
    CSA C22.2 No. 60601-1-12 : 2015 MEDICAL ELECTRICAL EQUIPMENT - PART 1-12: GENERAL REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE - COLLATERAL STANDARD: REQUIREMENTS FOR MEDICAL ELECTRICAL EQUIPMENT AND MEDICAL ELECTRICAL SYSTEMS INTENDED FOR USE IN THE EMERGENCY MEDICAL SERVICES ENVIRONMENT
    IEC TR 60721-4-7:2001+AMD1:2003 CSV Classification of environmental conditions - Part 4-7: Guidance for the correlation and transformation of environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Portable and non-stationary use
    IEC 61131-2:2017 Industrial-process measurement and control - Programmable controllers - Part 2: Equipment requirements and tests
    IEC TR 60721-4-0:2002 Classification of environmental conditions - Part 4-0: Guidance for the correlation and transformation of the environmental condition classes of IEC 60721-3 to the environmental tests of IEC 60068 - Introduction
    EN ISO 80601-2-12:2011/AC:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-12: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF CRITICAL CARE VENTILATORS (ISO 80601-2-12:2011/COR 1:2011)
    ISO 80601-2-12:2011 Medical electrical equipment Part 2-12: Particular requirements for basic safety and essential performance of critical care ventilators
    DIN EN ISO 21649 E : 2010 NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    UNE-EN 50491-2:2011 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) -- Part 2: Environmental conditions
    ISO 80601-2-72:2015 Medical electrical equipment — Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients
    BS EN ISO 11608-4:2007 Pen-injectors for medical use Requirements and test methods for electronic and electromechanical pen-injectors
    ISO 20072:2009 Aerosol drug delivery device design verification Requirements and test methods
    ISO 11608-4:2006 Pen-injectors for medical use Part 4: Requirements and test methods for electronic and electromechanical pen-injectors
    ISO 21647:2004 Medical electrical equipment Particular requirements for the basic safety and essential performance of respiratory gas monitors
    IEC 62534:2010 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material
    BS EN 50491-2 : 2010 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
    EN ISO 80601-2-72:2015 Medical electrical equipment - Part 2-72: Particular requirements for basic safety and essential performance of home healthcare environment ventilators for ventilator-dependent patients (ISO 80601-2-72:2015)
    EN ISO 21649:2009 Needle-free injectors for medical use - Requirements and test methods (ISO 21649:2006)
    IEC 80601-2-30:2018 RLV Medical electrical equipment - Part 2-30: Particular requirements for the basic safety and essential performance of automated non-invasive sphygmomanometers
    EN ISO 20072:2013 Aerosol drug delivery device design verification - Requirements and test methods (ISO 20072:2009)
    EN ISO 11608-4:2007 Pen-injectors for medical use - Part 4: Requirements and test methods for electronic and electromechanical pen-injectors (ISO 11608-4:2006)
    I.S. EN ISO 80601-2-61:2011 MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
    DIN EN ISO 81060-1:2012-08 Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007)
    BS 5760-13.4:1993 Reliability of systems, equipment and components. Guide to reliability test conditions for consumer equipment Conditions providing a low degree of simulation for equipment for portable and non-stationary use
    BS IEC 62706:2012 Radiation protection instrumentation. Environmental, electromagnetic and mechanical performance requirements
    16/30316718 DC : 0 BS EN ISO 80601-2-61 - MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
    BS EN 60051-1:2017 Direct acting indicating analogue electrical measuring instruments and their accessories Definitions and general requirements common to all parts
    15/30301708 DC : 0 BS EN 62282-6-200 ED 3.0 - FUEL CELL TECHNOLOGIES - PART 6-200: MICRO FUEL CELL POWER SYSTEMS - PERFORMANCE TEST METHODS
    03/113382 DC : DRAFT SEP 2003 BS EN ISO 21649 - NEEDLE-FREE INJECTORS FOR MEDICAL USE - REQUIREMENTS AND TEST METHODS
    NF EN 300019 1-7 : 2004 ENVIRONMENTAL ENGINEERING (EE) - ENVIRONMENTAL CONDITIONS AND ENVIRONMENTAL TESTS FOR TELECOMMUNICATIONS EQUIPMENT - PART 1-7: CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PORTABLE AND NO STATIONARY USE
    IEC 80601-2-30 REDLINE : 2ED 2018 MEDICAL ELECTRICAL EQUIPMENT - PART 2-30: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF AUTOMATED NON-INVASIVE SPHYGMOMANOMETERS
    CSA Z21647 : 2007 : R2012 MEDICAL ELECTRICAL EQUIPMENT - PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    CSA C22.2 No. 80601-2-55 : 2014(R2019) MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS
    EN 60601-1-11:2015 Medical electrical equipment - Part 1-11: General requirements for basic safety and essential performance - Collateral Standard: Requirements for medical electrical equipment and medical electrical systems used in the home healthcare environment
    I.S. EN ISO 80601-2-55:2018 MEDICAL ELECTRICAL EQUIPMENT - PART 2-55: PARTICULAR REQUIREMENTS FOR THE BASIC SAFETY AND ESSENTIAL PERFORMANCE OF RESPIRATORY GAS MONITORS (ISO 80601-2-55:2018)
    ISO 80601-2-55:2018 Medical electrical equipment — Part 2-55: Particular requirements for the basic safety and essential performance of respiratory gas monitors
    CSA C22.2 No. 80601-2-61 : 2014(R2019) MEDICAL ELECTRICAL EQUIPMENT - PART 2-61: PARTICULAR REQUIREMENTS FOR BASIC SAFETY AND ESSENTIAL PERFORMANCE OF PULSE OXIMETER EQUIPMENT
    I.S. EN ISO 20072:2013 AEROSOL DRUG DELIVERY DEVICE DESIGN VERIFICATION - REQUIREMENTS AND TEST METHODS (ISO 20072:2009)
    BS EN ISO 21647:2009 Medical electrical equipment. Particular requirements for the basic safety and essential performance of respiratory gas monitors
    ISO 9919:2005 Medical electrical equipment Particular requirements for the basic safety and essential performance of pulse oximeter equipment for medical use
    EN ISO 81060-1:2012 Non-invasive sphygmomanometers - Part 1: Requirements and test methods for non-automated measurement type (ISO 81060-1:2007)
    EN 60044-1:1999/A2:2003 INSTRUMENT TRANSFORMERS - PART 1: CURRENT TRANSFORMERS
    EN 62534:2015 Radiation protection instrumentation - Highly sensitive hand-held instruments for neutron detection of radioactive material
    EN 60664-5:2007 Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm
    IEC 61709:2017 Electric components - Reliability - Reference conditions for failure rates and stress models for conversion
    EN 50491-2 : 2010 AMD 1 2015 GENERAL REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) - PART 2: ENVIRONMENTAL CONDITIONS
    EN 62282-6-200:2017 Fuel cell technologies - Part 6-200: Micro fuel cell power systems - Performance test methods
    EN 60051-1:2017 Direct acting indicating analogue electrical measuring instruments and their accessories - Part 1: Definitions and general requirements common to all parts

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60721-1:1990+AMD1:1992+AMD2:1995 CSV Classification of environmental conditions - Part 1: Environmental parameters and their severities
    IEC 60721-2-1:2013 Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity
    IEC 60721-3-0:1984+AMD1:1987 CSV Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Introduction
    IEC 60721-3-2:1997 Classification of environmental conditions - Part 3: Classification of groups of environmental parameters and their severities - Section 2: Transportation
    IEC 60721-3-3:1994+AMD1:1995+AMD2:1996 CSV Classification of environmental conditions - Part 3-3: Classification of groups of environmental parameters and their severities - Stationary use at weatherprotected locations
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective