• IEEE 1309 : 2013

    Current The latest, up-to-date edition.

    CALIBRATION OF ELECTROMAGNETIC FIELD SENSORS AND PROBES (EXCLUDING ANTENNAS) FROM 9 KHZ TO 40 GHZ

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  22-11-2013

    Publisher:  Institute of Electrical & Electronics Engineers

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Overview
    2 Normative references
    3 Definitions
    4 Measurement methods
    5 Standard field generation methods
    6 Calibration uncertainty
    7 Frequency domain calibration parameters
    8 Procedures and measurement techniques
    9 Documentation
    Annex A (normative) - Field generation setups and field calculation
            methods for probe calibrations
    Annex B (informative) - Basic information about probe types and
            uses for measuring various types of signals
    Annex C (informative) - Minimizing probe measurement uncertainties
            during end use
    Annex D (informative) - Burst-peak field measurements
    Annex E (informative) - Estimating uncertainty
    Annex F (informative) - Bibliography

    Abstract - (Show below) - (Hide below)

    Covers calibration methods for electromagnetic field sensors and probes, excluding antennas per se, for the frequency range from 9 kHz to 40 GHz. Specifies the characteristics, use and measurement uncertainties for electromagnetic field sensors and field probes.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes IEEE DRAFT 1309. (12/2005)
    Document Type Standard
    Publisher Institute of Electrical & Electronics Engineers
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    ANSI C63.4 : 2014 METHODS OF MEASUREMENT OF RADIO-NOISE EMISSIONS FROM LOW-VOLTAGE ELECTRICAL AND ELECTRONIC EQUIPMENT IN THE RANGE OF 9 KHz TO 40 GHz
    ANSI C63.10 : 2013 PROCEDURES FOR COMPLIANCE TESTING OF UNLICENSED WIRELESS DEVICES
    BS IEC/IEEE 62704-2 : 2017 DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES, 30 MHZ TO 6 GHZ - PART 2: SPECIFIC REQUIREMENTS FOR FINITE DIFFERENCE TIME DOMAIN (FDTD) MODELLING OF EXPOSURE FROM VEHICLE MOUNTED ANTENNAS
    BS EN 61000-4-20:2003 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
    IEC/IEEE 62704-2:2017 Determining the peak spatial-average specific absorption rate (SAR) in the human body from wireless communications devices, 30 MHz to 6 GHz - Part 2: Specific requirements for finite difference time domain (FDTD) modelling of exposure from vehicle mounted antennas
    EN 61000-4-20:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
    BS EN 55016-1-6 : 2015 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    CEI EN 61000-4-20 : 2013 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
    I.S. EN 61000-4-3:2006 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
    ANSI C63.19 : 2011 METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS
    ANSI C63.15 : 2010 RECOMMENDED PRACTICE FOR THE IMMUNITY MEASUREMENT OF ELECTRICAL AND ELECTRONIC EQUIPMENT
    EN 61000-4-3 : 2006 AMD 2 2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
    13/30276620 DC : 0 BS EN 62704-2 ED 1.0 - DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN BODY FROM WIRELESS COMMUNICATIONS DEVICES 30MHZ - 6MHZ - PART 2: SPECIFIC REQUIREMENTS FOR FINITE DIFFERENCE TIME DOMAIN (FDTD) MODELING OF EXPOSURE FROM VEHICLE MOUNTED ANTENNAS
    00/244828 DC : DRAFT OCT 2000 IEC 61983 ED. 1.0 - MEASUREMENT AND EVALUATION OF HIGH FREQUENCY (9 KHZ TO 300 GHZ) ELECTROMAGNETIC FIELDS WITH REGARD TO HUMAN EXPOSURE
    I.S. EN 61000-4-20:2010 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-20: TESTING AND MEASUREMENT TECHNIQUES - EMISSION AND IMMUNITY TESTING IN TRANSVERSE ELECTROMAGNETIC (TEM) WAVEGUIDES
    UNE-EN 61000-4-20:2011 Electromagnetic compatibility (EMC) -- Part 4-20: Testing and measurement techniques - Emission and immunity testing in Transverse Electromagnetic (TEM) waveguides - Basic EMC publication
    IEC 61000-4-20:2010 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
    IEEE DRAFT C63.19 : 2005 METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS
    BS EN 61000-4-3 : 2006 ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIO-FREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
    17/30356883 DC : 0 BS EN 61000-4-3 ED4 - ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 4-3: TESTING AND MEASUREMENT TECHNIQUES - RADIATED, RADIOFREQUENCY, ELECTROMAGNETIC FIELD IMMUNITY TEST
    IEEE 1528 : 2013 RECOMMENDED PRACTICE FOR DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN HEAD FROM WIRELESS COMMUNICATIONS DEVICES: MEASUREMENT TECHNIQUES
    IEEE C95.3 : 2002 RECOMMENDED PRACTICE FOR MEASUREMENTS AND COMPUTATIONS OF RADIO FREQUENCY ELECTROMAGNETIC FIELDS WITH RESPECT TO HUMAN EXPOSURE TO SUCH FIELDS, 100 KHZ - 300 GHZ
    ANSI C63.9:2008 RF IMMUNITY OF AUDIO OFFICE EQUIPMENT TO GENERAL USE TRANSMITTING DEVICES WITH TRANSMITTER POWER LEVELS UP TO 8 WATTS
    ANSI C63.26 : 2015 COMPLIANCE TESTING OF TRANSMITTERS USED IN LICENSED RADIO SERVICES
    ISO/TR 10305-1:2003 Road vehicles Calibration of electromagnetic field strength measuring devices Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz
    I.S. EN 55016-1-6:2015 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION
    ANSI C63.10:2020 American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices
    EN 55016-1-6:2015/A1:2017 SPECIFICATION FOR RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS AND METHODS - PART 1-6: RADIO DISTURBANCE AND IMMUNITY MEASURING APPARATUS - EMC ANTENNA CALIBRATION (CISPR 16-1-6:2014/A1:2017)

    Standards Referencing This Book - (Show below) - (Hide below)

    ISO/IEC 17025:2005 General requirements for the competence of testing and calibration laboratories
    NCSL RP 12 : 2013 MEASUREMENT UNCERTAINTY ANALYSIS
    IEC 62232:2017 Determination of RF field strength, power density and SAR in the vicinity of radiocommunication base stations for the purpose of evaluating human exposure
    ANSI/NCSL Z540 3 : 2006(R2013) REQUIREMENTS FOR THE CALIBRATION OF MEASURING AND TEST EQUIPMENT
    ISO/IEC Guide 98-1:2009 Uncertainty of measurement Part 1: Introduction to the expression of uncertainty in measurement
    IEC 61000-4-33:2005 Electromagnetic compatibility (EMC) - Part 4-33: Testing and measurement techniques - Measurement methods for high-power transient parameters
    ISO/TR 10305-2:2003 Road vehicles Calibration of electromagnetic field strength measuring devices Part 2: IEEE standard for calibration of electromagnetic field sensors and probes, excluding antennas, from 9 kHz to 40 GHz
    IEEE C95.3 : 2002 RECOMMENDED PRACTICE FOR MEASUREMENTS AND COMPUTATIONS OF RADIO FREQUENCY ELECTROMAGNETIC FIELDS WITH RESPECT TO HUMAN EXPOSURE TO SUCH FIELDS, 100 KHZ - 300 GHZ
    IEEE 1528 : 2013 RECOMMENDED PRACTICE FOR DETERMINING THE PEAK SPATIAL-AVERAGE SPECIFIC ABSORPTION RATE (SAR) IN THE HUMAN HEAD FROM WIRELESS COMMUNICATIONS DEVICES: MEASUREMENT TECHNIQUES
    ANSI C63.14 : 2014 DICTIONARY OF ELECTROMAGNETIC COMPATIBILITY (EMC) INCLUDING ELECTROMAGNETIC ENVIRONMENTAL EFFECTS (E3)
    IEC 61000-4-20:2010 Electromagnetic compatibility (EMC) - Part 4-20: Testing and measurement techniques - Emission and immunity testing in transverse electromagnetic (TEM) waveguides
    IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test
    IEC 61786:1998 Measurement of low-frequency magnetic and electric fields with regard to exposure of human beings - Special requirements for instruments and guidance for measurements
    IEEE C95.1 : 2005 SAFETY LEVELS WITH RESPECT TO HUMAN EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELDS, 3 KHZ TO 300 GHZ
    CEI 211-7 : 2001 GUIDE FOR THE MEASUREMENT AND THE EVALUATION OF ELECTROMAGNETIC FIELDS IN THE FREQUENCY RANGE 10 KHZ - 300 GHZ, WITH REFERENCE TO THE HUMAN EXPOSURE
    ANSI C63.5 : 2006 ELECTROMAGNETIC COMPATIBILITY - RADIATED EMISSION MEASUREMENTS IN ELECTROMAGNETIC INTERFERENCE (EMI) CONTROL - CALIBRATION AND QUALIFICATION OF ANTENNAS (9 KHZ TO 40 GHZ)
    ANSI C63.19 : 2011 METHODS OF MEASUREMENT OF COMPATIBILITY BETWEEN WIRELESS COMMUNICATIONS DEVICES AND HEARING AIDS
    IEEE C95.1A : 2010 SAFETY LEVELS WITH RESPECT TO HUMAN EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELDS, 3 KHZ TO 300 GHZ - AMENDMENT 1: SPECIFIES CEILING LIMITS FOR INDUCED AND CONTACT CURRENT, CLARIFIES DISTINCTIONS BETWEEN LOCALIZED EXPOSURE AND SPATIAL PEAK POWER DENSITY
    ANSI/NCSL Z540 2 : 1997(R2012) U.S. GUIDE TO EXPRESSION OF UNCERTAINTY IN MEASUREMENT
    ISO/TR 10305-1:2003 Road vehicles Calibration of electromagnetic field strength measuring devices Part 1: Devices for measurement of electromagnetic fields at frequencies > 0 Hz
    ISO/IEC Guide 98-3:2008 Uncertainty of measurement Part 3: Guide to the expression of uncertainty in measurement (GUM:1995)
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective