IEEE 902-1998
|
IEEE Guide for Maintenance, Operation, and Safety of Industrial and Commercial Power Systems (Yellow Book) |
IEEE 1095-2012 REDLINE
|
IEEE Guide for the Installation of Vertical Generators and Generator/Motors for Hydroelectric Applications |
CSA C392 : 2011
|
TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
CSA C392 : 2011 : INC : UPD 2 : 2012
|
TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
IEEE 1068-2015 REDLINE
|
IEEE Standard for the Repair and Rewinding of AC Electric Motors in the Petroleum, Chemical, and Process Industries |
IEEE 3004.8-2016
|
IEEE Recommended Practice for Motor Protection in Industrial and Commercial Power Systems |
IEEE 1665 : 2009
|
GUIDE FOR THE REWIND OF SYNCHRONOUS GENERATORS, 50 HZ AND 60 HZ, RATED 1 MVA AND ABOVE |
NFPA 70B : 2016
|
RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE |
IEEE DRAFT 1147 : D8 2005
|
GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS |
ASME AG-1 : 2019
|
CODE ON NUCLEAR AIR AND GAS TREATMENT |
ASME AG 1 : 2012
|
CODE ON NUCLEAR AIR AND GAS TREATMENT |
IEEE 115-2019
|
IEEE Guide for Test Procedures for Synchronous Machines Including Acceptance and Performance Testing and Parameter Determination for Dynamic Analysis |
IEEE C62.21 : 2003
|
GUIDE FOR THE APPLICATION OF SURGE VOLTAGE PROTECTIVE EQUIPMENT ON AC ROTATING MACHINERY 1000 V AND GREATER |
IEEE DRAFT 1248 : D7 97
|
DRAFT GUIDE FOR THE COMMISSIONING OF ELECTRICAL SYSTEMS IN HYDROELECTRIC POWER PLANTS |
IEEE 334 : 2007
|
QUALIFYING CONTINUOUS DUTY CLASS 1E MOTORS FOR NUCLEAR POWER GENERATING STATIONS |
CSA C392 : 2011 : INC : UPD 1 : 2011
|
TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
IEEE DRAFT C50.12 : D10 2004
|
SALIENT-POLE 50 AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE |
S.R. CLC/TS 60034-27:2011
|
ROTATING ELECTRICAL MACHINES - PART 27: OFF-LINE PARTIAL DISCHARGE MEASUREMENTS ON THE STATOR WINDING INSULATION OF ROTATING ELECTRICAL MACHINES |
NETA ATS : 2017
|
ACCEPTANCE TESTING SPECIFICATIONS FOR ELECTRICAL POWER EQUIPMENT AND SYSTEMS |
IEEE DRAFT 434 : D10 2006
|
FUNCTIONAL EVALUATION OF INSULATION SYSTEMS FOR AC ELECTRIC MACHINES RATED 2300 V AND ABOVE |
NEMA ICS 16:2001
|
Motion/Position Control Motors, Controls and Feedback Devices |
NEMA MG 7 : 93 REV 1 96
|
MOTION/POSITION CONTROL MOTORS AND CONTROLS |
IEEE 3006.3-2017
|
IEEE Recommended Practice for Determining the Impact of Preventative Maintenance on the Reliability of Industrial and Commercial Power Systems |
IEEE 1290-2015 REDLINE
|
IEEE Guide for Motor-Operated Valve (MOV) Motor Application, Protection, Control, and Testing in Nuclear Power-Generating Stations |
CSA C392 : 2011 : R2016
|
TESTING OF THREE-PHASE SQUIRREL CAGE INDUCTION MOTORS DURING REFURBISHMENT |
IEEE 95-2002
|
IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage |
API STD 541 : 2014
|
FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
IEEE C50.13 : 2014
|
CYLINDRICAL-ROTOR 50 HZ AND 60 HZ, SYNCHRONOUS GENERATORS RATED 10 MVA AND ABOVE |
IEEE DRAFT 67 : D5 2005
|
GUIDE FOR THE OPERATION AND MAINTENANCE OF TURBINE GENERATORS |
IEEE 434-2006
|
IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above |
API 546 : 2008
|
BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
IEEE 252 : 1995
|
TEST PROCEDURE FOR POLYPHASE INDUCTION MOTORS HAVING LIQUID IN THE MAGNETIC GAP |
IEEE 1205-2014
|
IEEE Guide for Assessing, Monitoring, and Mitigating Aging Effects on Electrical Equipment Used in Nuclear Power Generating Stations and Other Nuclear Facilities |
IEEE 115-2009 REDLINE
|
IEEE Guide for Test Procedures for Synchronous Machines Part I—Acceptance and Performance Testing Part II—Test Procedures and Parameter Determination for Dynamic Analysis |
CSA C391 : 2015
|
TESTING OF THREE-PHASE SYNCHRONOUS MACHINES DURING REFURBISHMENT |
IEC 60034-27-4:2018
|
Rotating electrical machines - Part 27-4: Measurement of insulation resistance and polarization index of winding insulation of rotating electrical machines |
IEC TS 60034-27:2006
|
Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
IEC 60034-27-1:2017
|
Rotating electrical machines - Part 27-1: Off-line partial discharge measurements on the winding insulation |
IEEE 1147-2005
|
IEEE Guide for the Rehabilitation of Hydroelectric Power Plants |
CLC/TS 60034-27:2011
|
Rotating electrical machines - Part 27: Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
05/30128254 DC : DRAFT JAN 2005
|
IEC 60034-27 - ROTATING ELECTRICAL MACHINES - PART 27: PARTIAL DISCHARGE OFF-LINE MEASUREMENTS ON THE STATOR WINDING INSULATION OF ROTATING MACHINERY |
DD CLC/TS 60034-27:2011
|
Rotating electrical machines Off-line partial discharge measurements on the stator winding insulation of rotating electrical machines |
IEEE 45.6-2016
|
IEEE Recommended Practice for Electrical Installations on Shipboard--Electrical Testing |
(INACTIVE RECORD)IEEE C50.12 : 2005
|
SALIENT-POLE 50 HZ AND 60 HZ SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS RATED 5 MVA AND ABOVE |
IEEE 2030.2-2015
|
IEEE Guide for the Interoperability of Energy Storage Systems Integrated with the Electric Power Infrastructure |
IEEE 1415 : 2006
|
INDUCTION MACHINERY MAINTENANCE TESTING AND FAILURE ANALYSIS |
IEEE 112-2004
|
IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
IEEE DRAFT 1068 : D3 JUN 96
|
RECOMMENDED PRACTICE FOR THE REPAIR AND REWINDING OF MOTORS FOR THE PETROLEUM AND CHEMICAL INDUSTRY |
IEEE 841.1-2023
|
IEEE Standard for Process Industry--International Energy Efficiency Class 3 (IE3) Premium-Efficiency, Severe Duty, Totally Enclosed Frame Surface Cooled Squirrel Cage Induction Motors--0.75 kW to 370 kW (1 hp to 500 hp) |
IEEE C50.13-2014
|
IEEE Standard for Cylindrical-Rotor 50 Hz and 60 Hz Synchronous Generators Rated 10 MVA and Above |
IEEE 841-2021
|
IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Squirrel Cage Induction Motors from 0.75 kW to 370 kW (1 hp to 500 hp) |
IEEE 1812-2014
|
IEEE Trial-Use Guide for Testing Permanent Magnet Machines |
IEEE 522-2023
|
IEEE Guide for Testing Turn Insulation of Form-Wound Stator Coils for Alternating-Current Electric Machines |
IEEE 252-2022
|
IEEE Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap |
NEMA MG 10012:2023
|
Safety Standard for Construction and Guide for Selection, Installation and Use of Electric Motors and Generators |
IEEE 56-2016
|
IEEE Guide for Insulation Maintenance of Electric Machines |
IEEE 1017.4-2023
|
IEEE Recommended Practice for Testing and Rating of Electrical Submersible Pump Motors |
IEEE 112-2017
|
IEEE Standard Test Procedure for Polyphase Induction Motors and Generators |
IEEE 1812-2023 REDLINE
|
IEEE Guide for Testing Permanent Magnet Machines |