• IEEE 1147 : 2005

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    GUIDE FOR THE REHABILITATION OF HYDROELECTRIC POWER PLANTS

    Available format(s):  Hardcopy, PDF

    Superseded date:  05-11-2021

    Language(s):  English

    Published date:  22-03-2006

    Publisher:  Institute of Electrical & Electronics Engineers

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Overview
      1.1 Scope
      1.2 Purpose
    2 Normative references
    3 Definitions
    4 General assessment considerations
      4.1 General conditions for rehabilitation
      4.2 Systems approach to rehabilitation
      4.3 Feasibility study
      4.4 Plant staffing assessment
    5 Rehabilitation of waterways
      5.1 General
      5.2 Leakage losses
      5.3 Head (hydraulic) losses
      5.4 Fishery considerations
      5.5 Water quality
      5.6 Cold weather
    6 Equipment affected by rehabilitation
      6.1 General
      6.2 Turbines
      6.3 Governors
      6.4 Generators
      6.5 Excitation systems
      6.6 Generator main leads and switchgear
      6.7 Generator neutral grounding equipment
      6.8 Main transformers
      6.9 Control and instrumentation equipment
      6.10 Electrical equipment protection
      6.11 Auxiliary power equipment
      6.12 Batteries, chargers, and dc distribution equipment
      6.13 Emergency power equipment
      6.14 Uninterruptible power supply (UPS)
      6.15 Lighting
      6.16 Water systems
      6.17 Station drainage
      6.18 Grounding system
      6.19 Cables and raceways
      6.20 Heating, ventilating, and air conditioning systems
      6.21 Fire protection
      6.22 Compressed air system
      6.23 Cranes
      6.24 Lubrication and insulating oil purification equipment
      6.25 Telephone or other communication equipment
      6.26 Plant security
      6.27 Machine shop
    Annex A (informative) Bibliography

    Abstract - (Show below) - (Hide below)

    Specifies alternatives that hydroelectric power plant owners should consider when undertaking a rehabilitation of the facilities. It is useful in ensuring that potential improvements are not overlooked in the owner's process.

    General Product Information - (Show below) - (Hide below)

    Development Note Supersedes IEEE DRAFT 1147. (03/2006)
    Document Type Standard
    Publisher Institute of Electrical & Electronics Engineers
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    IEEE 1665 : 2009 GUIDE FOR THE REWIND OF SYNCHRONOUS GENERATORS, 50 HZ AND 60 HZ, RATED 1 MVA AND ABOVE
    I.S. EN 62270:2004 HYDROELECTRIC POWER PLANT AUTOMATION - GUIDE FOR COMPUTER-BASED CONTROL
    IEEE DRAFT 125 : D8.5 2006 PREPARATION OF EQUIPMENT SPECIFICATIONS FOR SPEED-GOVERNING OF HYDRAULIC TURBINES INTENDED TO DRIVE ELECTRIC GENERATORS
    01/706551 DC : DRAFT APR 2001 BS EN 62270 ED.1 - IEEE GUIDE FOR COMPUTER-BASED CONTROL FOR HYDROELECTRIC POWER PLANT AUTOMATION
    EN 62270:2004 Hydroelectric power plant automation - Guide for computer-based control
    IEEE 1207 : 2011 GUIDE FOR THE APPLICATION OF TURBINE GOVERNING SYSTEMS FOR HYDROELECTRIC GENERATING UNITS
    CEI EN 62270 : 2005 HYDROELECTRIC POWER PLANT AUTOMATION - GUIDE FOR COMPUTER-BASED CONTROL
    BS EN 62270:2004 Hydroelectric power plant automation. Guide for computer-based control

    Standards Referencing This Book - (Show below) - (Hide below)

    UL 1236:8ED 2015-04 Battery Chargers for Charging Engine-Starter Batteries
    ANSI C37.12 : 2008 SPECIFICATION GUIDE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS BASED ON A SYMMETRICAL CURRENT BASIS
    IEEE C37.91 : 2008 PROTECTING POWER TRANSFORMERS
    NFPA 851 : 2010 FIRE PROTECTION FOR HYDROELECTRIC GENERATING PLANTS
    IEEE C62.92.2 : 1989 APPLICATION OF NEUTRAL GROUNDING IN ELECTRICAL UTILITY SYSTEMS - PART 2: SYNCHRONOUS GENERATOR SYSTEMS
    IEEE C37.14:2015 DC (3200 V AND BELOW) POWER CIRCUIT BREAKERS USED IN ENCLOSURES
    IEEE C37.20.1:2015 METAL-ENCLOSED LOW-VOLTAGE (1000 VAC AND BELOW, 3200 VDC AND BELOW) POWER CIRCUIT BREAKER SWITCHGEAR
    IEC 60545:1976 Guide for commissioning, operation and maintenance of hydraulic turbines
    IEEE 434-2006 IEEE Guide for Functional Evaluation of Insulation Systems for AC Electric Machines Rated 2300 V and Above
    IEEE 1187-2013 RECOMMENDED PRACTICE FOR INSTALLATION DESIGN AND INSTALLATION OF VALVE-REGULATED LEAD-ACID STORAGE BATTERIES FOR STATIONARY APPLICATIONS
    IEEE C57.12.01 : 2015 GENERAL REQUIREMENTS FOR DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
    IEEE 62-1995 IEEE Guide for Diagnostic Field Testing of Electric Power Apparatus - Part 1: Oil Filled Power Transformers, Regulators, and Reactors
    IEEE 762-2006 IEEE Standard Definitions for Use in Reporting Electric Generating Unit Reliability, Availability, and Productivity
    UL 1072:4ED 2006-06 Medium-Voltage Power Cables
    IEEE 1095 : 2012 GUIDE FOR THE INSTALLATION OF VERTICAL GENERATORS AND GENERATOR/MOTORS FOR HYDROELECTRIC APPLICATIONS
    IEEE 421.2 : 2014 GUIDE FOR IDENTIFICATION, TESTING, AND EVALUATION OF THE DYNAMIC PERFORMANCE OF EXCITATION CONTROL SYSTEMS
    ANSI C50.12 : 2005 SYNCHRONOUS GENERATORS AND GENERATOR/MOTORS FOR HYDRAULIC TURBINE APPLICATIONS, REQUIREMENTS FOR SALIENT POLE SYNCHRONOUS
    IEEE C37.20.2-2015 REDLINE IEEE Standard for Metal-Clad Switchgear
    IEEE 1248 : 1998 GUIDE FOR THE COMMISSIONING OF ELECTRICAL SYSTEMS IN HYDROELECTRIC POWER PLANTS
    NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
    IEC TR 61364:1999 Nomenclature for hydroelectric powerplant machinery
    ANSI C50.10 : 1990 ROTATING ELECTRICAL MACHINERY - SYNCHRONOUS MACHINES
    IEC 61116:1992 Electromechanical equipment guide for small hydroelectric installations
    IEC 60308:2005 Hydraulic turbines - Testing of control systems
    IEEE C57.12.00-2015 STANDARD FOR GENERAL REQUIREMENTS FOR LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS
    IEEE C57.91:2011 GUIDE FOR LOADING MINERAL-OIL-IMMERSED TRANSFORMERS AND STEP-VOLTAGE REGULATORS
    IEEE 421.3-1997 HIGH-POTENTIAL TEST REQUIREMENTS FOR EXCITATION SYSTEMS FOR SYNCHRONOUS MACHINES
    UL 1066 : 4 LOW-VOLTAGE AC AND DC POWER CIRCUIT BREAKERS USED IN ENCLOSURES
    IEEE 82 : 2002 TEST PROCEDURE FOR IMPULSE VOLTAGE TESTS ON INSULATED CONDUCTORS
    IEC 60193:1999 Hydraulic turbines, storage pumps and pump-turbines - Model acceptance tests
    IEEE 810 : 2015 HYDRAULIC TURBINE AND GENERATOR SHAFT COUPLINGS AND SHAFT RUNOUT TOLERANCES
    IEC 60041:1991 Field acceptance tests to determine the hydraulic performance of hydraulic turbines, storage pumps and pump-turbines
    ASHRAE HDBK FUNDAMENTALS : 2013 ASHRAE HANDBOOK - FUNDAMENTALS
    IEEE C57.12.90-2010 LIQUID-IMMERSED DISTRIBUTION, POWER, AND REGULATING TRANSFORMERS
    IEEE 4-2013 HIGH-VOLTAGE TESTING TECHNIQUES
    IEEE C37.20.3 : 2013 METAL-ENCLOSED INTERRUPTER SWITCHGEAR (1 KV-38 KV)
    IEEE 242 : 2001 PROTECTION AND COORDINATION OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    IEEE C37.010 : 1999 AC HIGH-VOLTAGE CIRCUIT BREAKERS > 1000 VAC RATED ON A SYMMETRICAL CURRENT BASIS
    IEEE C57.98:2011 GUIDE FOR TRANSFORMER IMPULSE TESTS
    IEEE C37.13-2015 LOW-VOLTAGE AC POWER CIRCUIT BREAKERS USED IN ENCLOSURES
    IEEE 80-2013 GUIDE FOR SAFETY IN AC SUBSTATION GROUNDING
    IEEE 95-2002 IEEE Recommended Practice for Insulation Testing of AC Electric Machinery (2300 V and Above) With High Direct Voltage
    IEEE 1207 : 2011 GUIDE FOR THE APPLICATION OF TURBINE GOVERNING SYSTEMS FOR HYDROELECTRIC GENERATING UNITS
    IEEE 484-2002 RECOMMENDED PRACTICE FOR INSTALLATION DESIGN AND INSTALLATION OF VENTED LEAD-ACID BATTERIES FOR STATIONARY APPLICATIONS
    IEEE 142 : 2007 GROUNDING OF INDUSTRIAL AND COMMERCIAL POWER SYSTEMS
    NFPA 70 : 2017 NATIONAL ELECTRICAL CODE
    IEEE C37.011-2011 GUIDE FOR THE APPLICATION OF TRANSIENT RECOVERY VOLTAGE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS
    IEEE 115-2009 TEST PROCEDURES FOR SYNCHRONOUS MACHINES - PART 1: ACCEPTANCE AND PERFORMANCE TESTING - PART 2: TEST PROCEDURES AND PARAMETER DETERMINATION FOR DYNAMIC ANALYSIS
    ANSI C37.06 : 2009 AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS - PREFERRED RATINGS AND RELATED REQUIRED CAPABILITIES
    IEEE C37.09 : 1999 TEST PROCEDURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS
    IEC 60609:1978 Cavitation pitting evaluation in hydraulic turbines, storage pumps and pump-turbines
    IEEE 1249 : 2013 GUIDE FOR COMPUTER-BASED CONTROL FOR HYDROELECTRIC POWER PLANT AUTOMATION
    IEEE 450-2010 IEEE Recommended Practice for Maintenance, Testing, and Replacement of Vented Lead-Acid Batteries for Stationary Applications
    IEEE 1184-2006 IEEE Guide for Batteries for Uninterruptible Power Supply Systems
    IEEE C37.16-2009 REDLINE IEEE Standard for Preferred Ratings,Related Requirements, and Application Recommendations for Low-Voltage AC (635 V and below)and DC (3200 V and below) Power Circuit Breakers
    IEEE 43-2013 RECOMMENDED PRACTICE FOR TESTING INSULATION RESISTANCE OF ELECTRIC MACHINERY
    IEC 60805:1985 Guide for commissioning, operation and maintenance of storage pumps and of pump-turbines operating as pumps
    IEEE 422-2012 IEEE Guide for the Design of Cable Raceway Systems for Electric Generating Facilities
    IEEE 112-2004 IEEE Standard Test Procedure for Polyphase Induction Motors and Generators
    ANSI C92.1 : 1982 POWER SYSTEMS - INSULATION COORDINATION
    IEC 61362:2012 Guide to specification of hydraulic turbine governing systems
    IEEE C57.12.91 : 2011 DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
    IEEE C57.94-1982 RECOMMENDED PRACTICE FOR INSTALLATION, APPLICATION, OPERATION, AND MAINTENANCE OF DRY-TYPE DISTRIBUTION AND POWER TRANSFORMERS
    IEEE 286-2000 IEEE Recommended Practice for Measurement of Power Factor Tip-Up of Electric Machinery Stator Coil Insulation
    ANSI C37.9 : A70 TEST CD/AC HI-VOLTAGE CB RATED TOTAL CURRENT BASIS
    IEEE C57.116-2014 IEEE Guide for Transformers Directly Connected to Generators
    IEEE 400-2012 REDLINE IEEE Guide for Field Testing and Evaluation of the Insulation of Shielded Power Cable Systems Rated 5 kV and Above
    IEEE C57.12.56 : 1986 THERMAL EVALUATION OF INSULATION SYSTEMS FOR VENTILATED DRY-TYPE POWER AND DISTRIBUTION TRANSFORMERS
    UL 1564:4ED 2015-05 Industrial Battery Chargers
    IEEE C37.04 : 1999 IEEE STANDARD RATING STRUCTURE FOR AC HIGH-VOLTAGE CIRCUIT BREAKERS RATED ON A SYMMETRICAL CURRENT BASIS
    IEEE 1115 : 2014 RECOMMENDED PRACTICE FOR SIZING NICKEL-CADMIUM BATTERIES FOR STATIONARY APPLICATIONS
    IEEE 485 : 2010 RECOMMENDED PRACTICE FOR SIZING LEAD-ACID BATTERIES FOR STATIONARY APPLICATIONS
    IEEE 141 : 1993 IEEE Recommended Practice for Electric Power Distribution for Industrial Plants
    IEEE C37.96-2012 REDLINE IEEE Guide for AC Motor Protection
    IEEE C57.106 : 2006 ACCEPTANCE AND MAINTENANCE OF INSULATING MINERAL OIL IN ELECTRICAL EQUIPMENT
    IEEE C37.101 : 2006 GENERATOR GROUND PROTECTION
    IEEE C57.131-2012 REDLINE IEEE Standard Requirements for Tap Changers
    IEEE 367-2012 REDLINE IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective