• IEEE C37.122.1-2014 REDLINE

    Current The latest, up-to-date edition.

    IEEE Guide for Gas-Insulated Substations Rated Above 52 kV

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  05-12-2014

    Publisher:  Institute of Electrical & Electronics Engineers

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Scope
    2 Normative references
    3 Definitions, abbreviations, and acronyms
    4 Guideline for GIS
    Annex A (informative) - Bibliography

    Abstract - (Show below) - (Hide below)

    Gives information of special relevance to planning, design, testing, installation, operation and maintenance of gas-insulated substations (GISs) and equipment.

    General Product Information - (Show below) - (Hide below)

    Committee Substations
    Document Type Standard
    Publisher Institute of Electrical & Electronics Engineers
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    IEEE C37.122.4-2016 IEEE Guide for Application and User Guide for Gas-Insulated Transmission Lines, Rated 72.5 kV and Above
    BS EN 62271-203:2012 High-voltage switchgear and controlgear Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
    IEEE 525-2007 IEEE Guide for the Design and Installation of Cable Systems in Substations
    NFPA 70B : 2016 RECOMMENDED PRACTICE FOR ELECTRICAL EQUIPMENT MAINTENANCE
    UNE-EN 62271-203:2013 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
    IEEE C37.122.2-2022 IEEE Guide for the Application of Gas Insulated Substations 1 kV to 52 kV
    08/30179468 DC : DRAFT MAR 2008 BS EN 62271-203 - HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV
    IEEE 1416 : 1998 INTERFACE OF NEW GAS INSULATED EQUIPMENT IN EXISTING GAS INSULATED SUBSTATIONS
    IEEE 979-2012 IEEE Guide for Substation Fire Protection
    IEEE C37.123-1996 IEEE Guide to Specifications for Gas-Insulated, Electric Power Substation Equipment
    IEC 62271-203:2011 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
    CEI EN 62271-203 : 2013 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV
    IEEE 1861-2014 IEEE Guide for On-Site Acceptance Tests of Electrical Equipment and System Commissioning of 1000 kV AC and Above
    IEEE C37.122.6-2013 IEEE Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 kV
    I.S. EN 62271-203:2012 HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR - PART 203: GAS-INSULATED METAL-ENCLOSED SWITCHGEAR FOR RATED VOLTAGES ABOVE 52 KV (IEC 62271-203:2011 (EQV))
    EN 62271-203:2012 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
    IEEE C37.123-2016 IEEE Guide for Specifications for High-Voltage Gas-Insulated Substations Rated 52 kV and Above
    IEEE C37.122.7-2021 IEEE Guide for Field Testing of Gas-Insulated Substations Rated Above 52 kV

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60480:2004 Guidelines for the checking and treatment of sulfur hexafluoride (SF6) taken from electrical equipment and specification for its re-use
    ASME PV CODE 8 DIV 2 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES
    IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers
    IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
    EN 50052:2016 High-voltage switchgear and controlgear - Gas-filled cast aluminium alloy enclosures
    ASME B31.1 : 2016 POWER PIPING
    IEC 62271-207:2012 High-voltage switchgear and controlgear - Part 207: Seismic qualification for gas-insulated switchgear assemblies for rated voltages above 52 kV
    IEC 62155:2003 Hollow pressurized and unpressurized ceramic and glass insulators for use in electrical equipment with rated voltages greater than 1 000 V
    IEEE C37.100.1-2007 IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V
    ASME PV CODE 8 DIV 1 : 2017 BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1
    IEC 62271-204:2011 High-voltage switchgear and controlgear - Part 204: Rigid gas-insulated transmission lines for rated voltage above 52 kV
    IEEE C37.122.6-2013 IEEE Recommended Practice for the Interface of New Gas-Insulated Equipment in Existing Gas-Insulated Substations Rated above 52 kV
    IEEE 605-2008 IEEE Guide for Bus Design in Air Insulated Substations
    IEC 62271-209:2007 High-voltage switchgear and controlgear - Part 209: Cable connections for gas-insulated metal-enclosed switchgear for rated voltages above 52 kV - Fluid-filled and extruded insulation cables - Fluid-filled and dry-type cable-terminations
    IEEE 1300-2011 IEEE Guide for Cable Connections for Gas-Insulated Substations
    IEC 60376:2005 Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment
    EN 50064 : 1989 COR 2007 WROUGHT ALUMINIUM AND ALUMINIUM ALLOY ENCLOSURES FOR GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    IEEE 1125-1993 IEEE Guide for Moisture Measurement and Control in SF6 Gas-Insulated Equipment
    IEEE C37.122.3-2011 IEEE Guide for Sulphur Hexafluoride (SF6) Gas Handling for High-Voltage (over 1000 Vac) Equipment
    AISC 360 : 2016 SPECIFICATION FOR STRUCTURAL STEEL BUILDINGS
    IEEE 4-2013 IEEE Standard for High-Voltage Testing Techniques
    IEEE 315 : 1975 GRAPHIC SYMBOLS FOR ELECTRICAL AND ELECTRONICS DIAGRAMS (INCLUDING REFERENCE DESIGNATION LETTERS)
    IEC 61180-2:1994 High-voltage test techniques for low-voltage equipment - Part 2: Test equipment
    ISO 14044:2006 Environmental management Life cycle assessment Requirements and guidelines
    IEC 60068-2-47:2005 Environmental testing - Part 2-47: Test - Mounting of specimens for vibration, impact and similar dynamic tests
    IEEE C37.010-1999 IEEE Application Guide for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
    IEEE 80-2013 IEEE Guide for Safety in AC Substation Grounding
    IEEE C2-2017 NATIONAL ELECTRICAL SAFETY CODE (NESC)(R)
    IEC 61462:2007 Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations
    IEEE C63.2-2009 American National Standard for Electromagnetic Noise and Field Strength Instrumentation, 10 Hz to 40 GHz Specifications
    IEC 62271-203:2011 High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV
    IEEE C37.011-2011 REDLINE IEEE Guide for the Application of Transient Recovery Voltage for AC High-Voltage Circuit Breakers
    ASTM D 2472 : 2015 : REDLINE Standard Specification for Sulfur Hexafluoride
    IEEE C37.09-1999 IEEE Standard Test Procedure for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis
    IEC 62271-205:2008 High-voltage switchgear and controlgear - Part 205: Compact switchgear assemblies for rated voltages above 52 kV
    IEEE C37.301-2009 IEEE Standard for High-Voltage Switchgear (Above 1000 V) Test Techniques--Partial Discharge Measurements
    IEEE C37.012-2014 IEEE Guide for the Application of Capacitance Current Switching for AC High-Voltage Circuit Breakers Above 1000 V
    IEC 62271-1:2017 High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear
    IEEE C37.015-2009 IEEE Guide for the Application of Shunt Reactor Switching
    IEEE C37.24-2003 IEEE Guide for Evaluating the Effect of Solar Radiation on Outdoor Metal-Enclosed Switchgear
    NEMA CC1 : 2009(R2015) ELECTRIC POWER CONNECTORS FOR SUBSTATIONS
    IEC 61180-1:1992 High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements
    IEEE C37.21-2005 IEEE Standard for Control Switchboards
    IEC 60507:2013 Artificial pollution tests on high-voltage ceramic and glass insulators to be used on a.c. systems
    ISO 14040:2006 Environmental management Life cycle assessment Principles and framework
    IEEE C37.017-2010 IEEE Standard for Bushings for High-Voltage [over 1000 V (ac)] Circuit Breakers and Gas-Insulated Switchgear
    IEEE C37.04-1999 IEEE Standard Rating Structure for AC High-Voltage Circuit Breakers
    IEEE C37.06-2009 IEEE Standard for AC High-Voltage Circuit Breakers Rated on a Symmetrical Current Basis--Preferred Ratings and Related Required Capabilities for Voltages Above 1000 V
    IEEE 693-2005 IEEE Recommended Practice for Seismic Design of Substations
    IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches
    IEEE 367-2012 IEEE Recommended Practice for Determining the Electric Power Station Ground Potential Rise and Induced Voltage from a Power Fault
    EN 50089 : 92 AMD 1 94 SPECIFICATION FOR CAST RESIN PARTITIONS FOR METAL-ENCLOSED GAS-FILLED HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective