IEC 62271-100:2008+AMD1:2012+AMD2:2017 CSV
|
High-voltage switchgear and controlgear - Part 100: Alternating-current circuit-breakers |
IEC 60270:2000+AMD1:2015 CSV
|
High-voltage test techniques - Partial discharge measurements |
IEC 60044-5:2004
|
Instrument transformers - Part 5: Capacitor voltage transformers |
IEEE C37.100.1-2007
|
IEEE Standard of Common Requirements for High Voltage Power Switchgear Rated Above 1000 V |
IEC 60099-4:2014
|
Surge arresters - Part 4: Metal-oxide surge arresters without gaps for a.c. systems |
IEC 60156:1995
|
Insulating liquids - Determination of the breakdown voltage at power frequency - Test method |
IEC TS 60815-2:2008
|
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 2: Ceramic and glass insulators for a.c. systems |
IEC 60383-1:1993
|
Insulators for overhead lines with a nominal voltage above 1000 V - Part 1: Ceramic or glass insulator units for a.c. systems - Definitions, test methods and acceptance criteria |
IEC 60599:2015
|
Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
IEC 60076-10:2016
|
Power transformers - Part 10: Determination of sound levels |
IEC 60076-18:2012
|
Power transformers - Part 18: Measurement of frequency response |
IEEE C57.13.5-2009
|
IEEE Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above |
IEEE C57.93-2007
|
IEEE Guide for Installation and Maintenance of Liquid-Immersed Power Transformers |
IEEE C57.12.00-2015
|
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
IEEE C57.19.00 : 2004
|
GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS |
IEEE C57.91-2011 REDLINE
|
IEEE Guide for Loading Mineral-Oil-Immersed Transformers and Step-Voltage Regulators |
IEC 60376:2005
|
Specification of technical grade sulfur hexafluoride (SF6) for use in electrical equipment |
IEC 60567:2011
|
Oil-filled electrical equipment - Sampling of gases and analysis of free and dissolved gases - Guidance |
IEEE C57.12.00-2010 REDLINE
|
IEEE Standard for General Requirements for Liquid-Immersed Distribution, Power, and Regulating Transformers |
IEEE C57.13.1-2006 REDLINE
|
IEEE Guide for Field Testing of Relaying Current Transformers |
IEC 60694:1996+AMD1:2000+AMD2:2001 CSV
|
Common specifications for high-voltage switchgear and controlgear standards |
IEEE C57.12.90-2010
|
IEEE Standard Test Code for Liquid-Immersed Distribution, Power, and Regulating Transformers |
IEC 60296:2012 RLV
|
Fluids for electrotechnical applications - Unused mineral insulating oils for transformers and switchgear |
IEEE C62.11-2005
|
IEEE Standard for Metal-Oxide Surge Arresters for AC Power Circuits (> 1 kV) |
IEC 60129:1984
|
Alternating current disconnectors and earthing switches |
IEEE C57.104-2008
|
IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
IEEE C57.98-2011
|
IEEE Guide for Transformer Impulse Tests |
IEC 60076-3:2013
|
Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
IEEE C37.122.1-2014 REDLINE
|
IEEE Guide for Gas-Insulated Substations Rated Above 52 kV |
IEC 60044-1:1996+AMD1:2000+AMD2:2002 CSV
|
Instrument transformers - Part 1: Current transformers |
IEC 61462:2007
|
Composite hollow insulators - Pressurized and unpressurized insulators for use in electrical equipment with rated voltage greater than 1 000 V - Definitions, test methods, acceptance criteria and design recommendations |
IEC 60137:2017
|
Insulated bushings for alternating voltages above 1000 V |
IEC 60076-1:2011
|
Power transformers - Part 1: General |
IEC 62271-203:2011
|
High-voltage switchgear and controlgear - Part 203: Gas-insulated metal-enclosed switchgear for rated voltages above 52 kV |
IEC 60076-6:2007
|
Power transformers - Part 6: Reactors |
IEC 62271-1:2017
|
High-voltage switchgear and controlgear - Part 1: Common specifications for alternating current switchgear and controlgear |
IEC 60247:2004
|
Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
IEEE C57.12.70-2011
|
IEEE Standard for Standard Terminal Markings and Connections for Distribution and Power Transformers |
IEEE C37.122-2010
|
IEEE Standard for High Voltage Gas-Insulated Substations Rated Above 52 kV |
IEEE C57.12.10-2010 REDLINE
|
IEEE Standard Requirements for Liquid-Immersed Power Transformers |
IEC TS 60815-1:2008
|
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 1: Definitions, information and general principles |
IEEE C57.13-2008
|
IEEE Standard Requirements for Instrument Transformers |
IEC TS 60815-3:2008
|
Selection and dimensioning of high-voltage insulators intended for use in polluted conditions - Part 3: Polymer insulators for a.c. systems |
IEEE C57.106-2006
|
IEEE Guide for Acceptance and Maintenance of Insulating Oil in Equipment |
IEEE C57.135-2011
|
IEEE Guide for the Application, Specification, and Testing of Phase-Shifting Transformers |
IEC 62271-102:2001+AMD1:2011+AMD2:2013 CSV
|
High-voltage switchgear and controlgear - Part 102: Alternatingcurrent disconnectors and earthing switches |
IEEE C57.131-2012
|
IEEE Standard Requirements for Tap Changers |