ISO 10012-1:1992
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Quality assurance requirements for measuring equipment Part 1: Metrological confirmation system for measuring equipment
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
28-05-2019
Superseded by
Language(s)
English, French
Published date
23-01-1992
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Applies to: testing laboratories, including those providing a calibration service; suppliers of products or services; other organizations where measurement is used to demonstrate compliance with specified requirements.
| DocumentType |
Standard
|
| Pages |
14
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NFX 07 010 : 2001 | Identical |
| NBN EN 30012-1 : 1994 | Identical |
| NEN ISO 10012-1 : 1994 | Identical |
| NS ISO 10012-1 : 1ED 1992 | Identical |
| I.S. EN 30012-1:1994 | Identical |
| SAC GB/T 19022.1 : 1994 | Identical |
| SNV NF EN 30012-1 : 1994 | Identical |
| SNV DIN ISO 10012-1 : 1992 | Identical |
| AS 3912.1-1993 | Identical |
| UNE-EN 30012-1:1994 | Identical |
| BS EN 30012-1:1994 | Identical |
| EN 30012-1 : 1993 | Identical |
| NF EN 30012-1 : 1994 | Identical |
| CSA ISO 10012-1 : 0 | Identical |
| DIN ISO 10012-1:1992-08 | Identical |
| BS 5781-1(1992) : AMD 8147 | Identical |
| AQAP 169 : 1 | NATO GUIDANCE ON THE USE OF AQAP 160 EDITION 1 |
| PD 6532-5:1997 | Reference materials. Guide to the contents of certificates of reference materials Quality system guidelines for the production of reference materials |
| 02/124462 DC : DRAFT DEC 2002 | BS EN 285 - STERILIZATION - STEAM STERILIZERS - LARGE STERILIZERS |
| BS ISO 9000-2:1997 | Quality management and quality assurance standards Generic guidelines for the application of ISO 9001, ISO 9002 and ISO 9003 |
| PD ISO/TS 29001:2007 | Petroleum, petrochemical and natural gas industries. Sector-specific quality management systems. Requirements for product and service supply organizations |
| I.S. EN ISO 11137-1:2015 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| BS ISO 22198:2006 | Textiles. Fabrics. Determination of width and length |
| I.S. EN ISO 11074:2015 | SOIL QUALITY - VOCABULARY (ISO 11074:2015) |
| MIL-DTL-13623 Revision E:2010 | SWITCH, ROTARY: 28 VOLT DC |
| BS ISO 14964:2000 | Mechanical vibration and shock. Vibration of stationary structures. Specific requirements for quality management in measurement and evaluation of vibration |
| MIL R 23285 : B | RESISTOR, VARIABLE, NONWIRE WOUND GENERAL SPECIFICATION FOR |
| DD CEN/TS 15224:2005 | Health services. Quality management systems. Guide for the use of EN ISO 9001:2000 |
| BS EN 60068-3-6:2002 | Environmental testing. Guidance Confirmation of the performance of temperature/humidity chambers |
| I.S. ISO 9000-2:1994 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 2: GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002 AND ISO 9003 |
| AAMI ISO 11137-1 : 2006 : R2010 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| SAE ARP9009A | Aerospace Contract Clauses |
| 08/30132226 DC : DRAFT MAR 2008 | BS ISO 13535 - PETROLEUM AND NATURAL GAS INDUSTRIES - DRILLING AND PRODUCTION EQUIPMENT - HOISTING EQUIPMENT |
| DEFSTAN 05-92/2(1995) : 1995 | QUALITY SYSTEM REQUIREMENTS FOR PRODUCTION, INSTALLATION AND SERVICING |
| 05/30128302 DC : DRAFT JAN 2005 | EN ISO 22476-1 - GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 1: ELECTRICAL CONE AND PIEZOCONE PENETRATION TESTS |
| MIL-PRF-83383 Revision F:2017 | Circuit Breakers, Remote Control, Thermal, Trip Free General Specification For |
| RG.AERO 00083 : 0 | QUALITY SYSTEM APPLICABLE IN THE AEROSPACE FIELD - MODEL FOR QUALITY ASSURANCE IN DESIGN, DEVELOPMENT, PRODUCTION, INSTALLATION AND SERVICING |
| 07/30157769 DC : DRAFT DEC 2007 | BS EN ISO 11737-2 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 2: TESTS OF STERILITY PERFORMED IN THE VALIDATION OF A STERILIZATION PROCESS |
| GOST R 51814-7 : 2005 | MANAGEMENT QUALITY SYSTEMS FOR AUTOMOTIVE INDUSTRY - MANAGEMENT QUALITY SYSTEMS ANALYSIS |
| AAMI ISO 11140-4 : 2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| 02/205170 DC : DRAFT APR 2002 | ISO/CD 17884 - SHIP AND MARINE TECHNOLOGY - NAVIGATION - SEARCHLIGHTS FOR HIGH SPEED CRAFT |
| DEFSTAN 05-93/2(1995) : 1995 | QUALITY SYSTEM REQUIREMENTS FOR FINAL INSPECTION AND TEST (ADOPTION OF ISO 9003 - 1994 WITH SUPPLEMENTARY REQUIREMENTS) |
| AECTP-500 : 2016 | ELECTROMAGNETIC ENVIRONMENTAL EFFECTS TESTS AND VERIFICATION |
| MIL D 83531 : A (3) | DELAY LINES, PASSIVE |
| 09/30179627 DC : 0 | BS ISO 4007 - PERSONAL PROTECTIVE EQUIPMENT - EYE AND FACE PROTECTION - VOCABULARY |
| 03/109441 DC : DRAFT JUNE 2003 | EN 14726 - ALUMINIUM AND ALUMINIUM ALLOYS - CHEMICAL ANALYSIS - GUIDELINE FOR SPARK OPTICAL EMISSION SPECTROMETRIC ANALYSIS |
| PREN 2004-7 : 200P1 | AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - PART 7: REFERENCE BLOCKS FOR THE CALIBRATION OF MEASURING EQUIPMENT USED IN THE DETERMINATION OF ELECTRICAL CONDUCTIVITY OF WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS |
| MIL-DTL-81581-8 Revision A:2006 | HOSE ASSEMBLIES, CABLE ASSEMBLIES, COMMUNICATION, ASSOCIATED |
| NASM 1312-8 : 2001 | FASTENER TEST METHODS, METHOD 8, TENSILE STRENGTH |
| CEI EN 60761-1 : 2005 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
| AQAP 110 : 2 | NATO QUALITY ASSURANCE REQUIREMENTS FOR DESIGN, DEVELOPMENT AND PRODUCTION |
| AAMI ISO 11137-1:2006 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| SAE AS39029D | Contacts, Electrical Connector, General Specification For |
| ASTM F 2332 : 2006 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| I.S. ISO 9004-3:1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS |
| ASTM E 1444 : 2005 | Standard Practice for Magnetic Particle Testing |
| EN ISO 13938-2:1999 | Textiles - Bursting properties of fabrics - Part 2: Pneumatic method for determination of bursting strength and bursting distension (ISO 13938-2:1999) |
| I.S. EN ISO 13938-2:1999 | TEXTILES - BURSTING PROPERTIES OF FABRICS - PART 2: PNEUMATIC METHOD FOR DETERMINATION OF BURSTING STRENGTH AND BURSTING DISTENSION |
| ISO 5084:1996 | Textiles — Determination of thickness of textiles and textile products |
| DIN EN ISO 11140-4:2007-07 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| BS EN 12127:1998 | Textiles. Fabrics. Determination of mass per unit area using small samples |
| BS EN 867-5:2001 | Non-biological systems for use in sterilizers Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S |
| ISO/IEC Guide 62:1996 | General requirements for bodies operating assessment and certification/registration of quality systems |
| PD IEC/PAS 61249-8-1:2014 | Qualification and performance of electrical insulating compound for printed wiring assemblies |
| BS EN ISO 14111:1999 | Natural gas. Guidelines to traceability in analysis |
| BS EN ISO 5436-1:2001 | Geometrical Product Specifications (GPS). Surface texture: Profile method; Measurement standards Geometric product specifications (GPS). Surface texture. Profile method calibration. Measurement standards |
| DIN EN ISO 9000-3:1998-08 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 3: GUIDELINES FOR THE APPLICATION OF ISO 9001:1994 TO THE DEVELOPMENT, SUPPLY, INSTALLATION AND MAINTENANCE OF COMPUTER SOFTWARE |
| CEN/TS 15224:2005 | Health services - Quality management systems - Guide for the use of EN ISO 9001:2000 |
| EN 12562:1999 | Textiles - Para-aramid multifilament yarns - Test methods |
| EN 12258-2:2004 | Aluminium and aluminium alloys - Terms and definitions - Part 2: Chemical analysis |
| EN 60068-3-6:2002 | Environmental testing - Part 3-6: Supporting documentation and guidance - Confirmation of the performance of temperature/humidity chambers |
| EN 12127:1997 | Textiles - Fabrics - Determination of mass per unit area using small samples |
| MIL-PRF-83504 Revision C:2005 | SWITCHES, DUAL IN-LINE PACKAGE (DIP), GENERAL SPECIFICATION FOR |
| MIL-C-11272 Revision E:2008 | CAPACITORS, FIXED, GLASS DIELECTRIC, GENERAL SPECIFICATION FOR |
| MIL C 55629 : B | CIRCUIT BREAKERS, MAGNETIC, UNSEALED, TRIP-FREE, SINGLE POLE, FRONT MOUNTED, AUXILIARY CONTACTS (1 TO 100 AMPERES) |
| MIL C 39019 : C | CIRCUIT BREAKERS, MAGNETIC, LOW-POWER, SEALED, TRIP-FREE, GENERAL SPECIFICATION FOR |
| MIL-PRF-71226 Base Document:1996 | ARMAMENTS AND MUNITIONS, STANDARD PROVISIONS, GENERAL SPECIFICATION FOR |
| MIL-DTL-13253 Revision E:2007 | HANDSETS, GENERAL SPECIFICATION FOR |
| MIL F 19207 : D (1) SUPP 1 | FUSEHOLDER, EXTRACTOR POST TYPE, BLOWN FUSE INDICATING AND NONINDICATING GENERAL SPECIFICATION FOR |
| MIL PRF 83513 : D | CONNECTORS, ELECTRICAL, RECTANGULAR, MICROMINIATURE, POLARIZED SHELL, GENERAL SPECIFICATION FOR |
| MIL-DTL-7790 Revision A:2002 | RESISTOR, THERMOCOUPLE LEAD SPOOL |
| MIL S 83731 : A | SWITCH, TOGGLE, UNSEALED AND SEALED TOGGLE, GENERAL SPECIFICATION FOR |
| MIL B 18 : F | BATTERIES, NON-RECHARGEABLE, DRY |
| IPC 4411 : A | SPECIFICATION AND CHARACTERIZATION METHODS FOR NONWOVEN PARA-ARAMID REINFORCEMENT |
| IPC 4204 CHINESE : A2011 AMD 1 2013 | FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY |
| MIL-DTL-3965 Revision H:2004 | CAPACITOR, FIXED ELECTROLYTIC (NONSOLID ELECTROLYTE), TANTALUM, GENERAL SPECIFICATION FOR |
| MIL PRF 24308 : D | CONNECTORS, ELECTRIC, RECTANGULAR, NONENVIRONMENTAL, MINIATURE, POLARIZED SHELL, RACK AND PANEL, GENERAL SPECIFICATION FOR |
| MIL S 3786 : F | SWITCH, ROTARY, CLOSED CONSTRUCTION, 2 AMPERES, LOW LEVEL, POSITIVE SHAFT GROUNDING STYLE SR04 |
| IPC 4204 : A | FLEXIBLE METAL-CLAD DIELECTRICS FOR USE IN FABRICATION OF FLEXIBLE PRINTED CIRCUITRY |
| IPC 4202 CHINESE : A | FLEXIBLE BASE DIELECTRICS FOR USE IN FLEXIBLE PRINTED CIRCUITRY |
| IPC J STD 006 CHINESE : B-2 | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| MIL-DTL-32496 Base Document:2014 | GENERATOR SETS, SKID MOUNTED, TRAILER MOUNTED ADVANCED MEDIUM-SIZED MOBILE POWER SOURCES, TACTICAL DIESEL FUEL DRIVEN, ALTERNATING CURRENT 5 THROUGH 60 KILOWATTS, GENERAL SPECIFICATION FOR |
| IPC 4101 CHINESE : C2009 | SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS |
| IPC 4101 GERMAN : C | SPECIFICATION FOR BASE MATERIALS FOR RIGID AND MULTILAYER PRINTED BOARDS |
| ISO 22198:2006 | Textiles — Fabrics — Determination of width and length |
| SAE AS4444 | Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi |
| I.S. EN 11140-4:2007 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| 99/124125 DC : DRAFT NOV 1999 | BS EN ISO 15883-1 - WASHER-DISINFECTORS - PART 1: GENERAL REQUIREMENTS, DEFINITIONS AND TESTS |
| SAE ARP5796 | Flight Critical Control Valves, Military Aircraft |
| 01/715236 DC : DRAFT NOV 2001 | BS EN 14343 - POSITIVE DISPLACEMENT PUMPS - PERFORMANCE TEST FOR ACCEPTANCE |
| BS IEC 60761-1 : 2002 AMD 15427 | EQUIPMENT FOR CONTINUOUS MONITORING OF RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
| MIL-DTL-26518 Revision C:2000 | CONNECTORS, ELECTRICAL, MINIATURE, RACK AND PANEL, ENVIRONMENT RESISTANT, 200 DEGREES C AMBIENT TEMPERATURE - GENERAL SPECIFICATION FOR |
| 08/30159339 DC : DRAFT JUNE 2008 | BS EN 12668-1 - NON-DESTRUCTIVE TESTING - CHARACTERIZATION AND VERIFICATION OF ULTRASONIC TESTING EQUIPMENT - PART 1: INSTRUMENTS |
| OIML D 27 : 2001 | INITIAL VERIFICATION OF MEASURING INSTRUMENTS UTILIZING THE MANUFACTURER'S QUALITY MANAGEMENT SYSTEM |
| BS ISO 10012-2:1997 | Quality assurance for measuring equipment. Guidelines for control of measuring processes |
| DIN ISO 3567:2015-05 | VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE (ISO 3567:2011) |
| 04/30122725 DC : DRAFT OCT 2004 | ISO TS 3567 - VACUUM TECHNOLOGY - VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE - GENERAL SET-UP AND PROCEDURE |
| ISO 9000-1:1994 | Quality management and quality assurance standards — Part 1: Guidelines for selection and use |
| AAMI ST63 : 2002 | STERILIZATION OF HEALTH CARE PRODUCTS - REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF AN INDUSTRIAL STERILIZATION PROCESS FOR MEDICAL DEVICES - DRY HEAT |
| BS 1339-3:2004 | Humidity Guide to the measurement of humidity |
| MIL R 27208 : D | RESISTOR, VARIABLE, WIRE-WOUND, NONPRECISION, GENERAL SPECIFICATION FOR |
| MIL F 28861 : B | FILTER AND CAPACITOR, RADIO FREQUENCY/ELECTROMAGNETIC INTERFERENCE SUPPRESSION, GENERAL SPECIFICATION FOR |
| PD6677 : 2002 (R12) | IMPLEMENTATION GUIDE FOR NATO AQAP-160 INCORPORATING ALL AQAP-160 TEXT AND RELEVANT ISO TEXT |
| 05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
| MIL-H-87111 Revision A:1984 | HEAT SINKS, SEMICONDUCTOR DEVICES, GENERAL SPECIFICATION FOR |
| MIL-DTL-52872 Revision D:1998 | Sensor Group, Ultrasonic Motion: Transceiver RT-1161/FSS-9(V) and Processor MX-9444/FSS-9(V) |
| SAE AS5590A | Connectors, Fiber Optic, Advanced, Circular or Rectangular, Plug and Receptacle, Environment Resistant, Removable Termini/Contacts, General Specification For |
| 05/30132237 DC : DRAFT APR 2005 | ISO 22198 - TEXTILES - FABRICS - DETERMINATION OF WIDTH AND LENGTH |
| 98/121311 DC : DRAFT MAR 1998 | ISO/DIS 13936-1 - TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 1: FIXED OPENING METHOD |
| 02/121044 DC : DRAFT MAR 2002 | BS ISO 13936-1.2 - TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 1: FIXED SEAM OPENING METHOD |
| AAMI ISO 11140-4 : 2007 : R2012 | STERILIZATION OF HEALTH CARE PRODUCTS - CHEMICAL INDICATORS - PART 4: CLASS 2 INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK-TYPE TEST FOR DETECTION OF STEAM PENETRATION |
| MIL L 25547 : B | LOUDSPEAKER, PERMANENT MAGNET LS-211/AIC-13 |
| MIL R 94 : E | RESISTORS, VARIABLE, COMPOSITION, GENERAL SPECIFICATION FOR |
| SAE AS7928B | Terminals, Lug: Splices, Conductor: Crimp Style, Copper, General Specification For |
| SAE AIR5919B | Alternatives to Cadmium Plating |
| ASTM F 2511 : 2005 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| I.S. EN 60068-3-5:2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
| SAE MA4510 | Fittings, Weld, Fluid Connection, 35 000 kPa, Metric |
| I.S. EN 60068-3-6:2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
| EI 1584 : 2017 | FOUR-INCH HYDRANT SYSTEM COMPONENTS AND ARRANGEMENTS |
| SAE ARP4945A | Aerospace-Solenoid Valve, Hydraulic, Three Way, Two Position, Direct Acting |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| CSA ISO 10012-2 : 0 | QUALITY ASSURANCE FOR MEASURING EQUIPMENT - GUIDELINES FOR CONTROL OF MEASUREMENT PROCESSES |
| SAE AS85028C | Connector, Electrical, Rectangular, Individual Contact Sealing, Polarized Center Jackscrew, General Specification For |
| CR 13695-1:2000 | Packaging - Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment - Part 1: Requirements for measuring and verifying the four heavy metals present in packaging |
| BIS IS/ISO 13935-1 : 1999 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 1: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE STRIP METHOD |
| ASTM E 1884 : 1997 | Standard Guide for General Requirements for Bodies Operating Assessment and Certification/Registration of Quality Systems (Withdrawn 2004) |
| ISO 9004-1:1994 | Quality management and quality system elements Part 1: Guidelines |
| IEC PAS 62213:2001 | Specification and characterization methods for nonwoven para-aramid reinforcement |
| BS EN ISO 13535:2001 | Petroleum and natural gas industries. Drilling and production equipment. Hoisting equipment Hoisting equipment |
| BS EN ISO 13936-3:2007 | Textiles. Determination of the slippage resistance of yarns at a seam in woven fabrics Needle clamp method |
| UNE-EN ISO 13934-2:2014 | Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014) |
| I.S. EN ISO 13934-2:2014 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
| I.S. EN ISO 10007:1997 | QUALITY MANAGEMENT - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| VDI/VDE/DGQ/DKD 2622 Blatt 21:2004-05 | Calibration of measurement equipments for electrical quantities - Recorders |
| I.S. EN ISO 8655-1:2002 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS |
| VDI/VDE/DGQ/DKD 2622 Blatt 7:2004-05 | Calibration of measuring equipment for electrical quantities - Universal counter |
| PD 6532-5:2000 | Reference materials. Guide to the contents of certificates of reference materials General requirements for the competence of reference material producers |
| BIS IS/ISO 13936-3 : 2005 | TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 3: NEEDLE CLAMP METHOD |
| 04/30048118 DC : DRAFT MAY 2004 | BS EN ISO 11135 - STERILIZATION OF HEALTH CARE PRODUCTS - ETHYLENE OXIDE - REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| CEI EN 60068-3-5 : 2002 | ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
| I.S. EN 60761-1:2004 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
| MIL-DTL-52876 Revision D:1997 | Cabinets, Monitor, CY-7359/FSS-9(V), CY-7360/FSS-9(V) and CY-7361/FSS-9(V) |
| CEI EN 60068-3-6 : 2002 | ENVIRONMENTAL TESTING - PART 3-6: SUPPORTING DOCUMENTATION AND GUIDANCE CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE/HUMIDITY CHAMBERS |
| AQAP 160 : 1 | NATO INTEGRATED QUALITY REQUIREMENTS FOR SOFTWARE THROUGHOUT THE LIFE CYCLE |
| MIL-STD-1537 Revision C:2002 | Electrical Conductivity Test for Verification of Heat Treatment of Aluminum Alloys, Eddy Current Method |
| 06/30123756 DC : DRAFT APR 2006 | EN ISO 22476-12 - GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 12: MECHANICAL CONE PENETRATION TEST |
| SAE AS7108C | NADCAP Audit Criteria for Chemical Processing |
| MIL-DTL-83538 Revision D:2006 | CONNECTORS AND ACCESSORIES, ELECTRICAL, CIRCULAR, UMBILICAL, ENVIRONMENT RESISTANT, REMOVABLE CRIMP CONTACTS FOR MIL-STD-1760 APPLICATIONS (METRIC), GENERAL SPECIFICATION FOR |
| MIL-PRF-21038 Revision F:2004 | TRANSFORMERS, PULSE, LOW POWER GENERAL SPECIFICATION FOR |
| 05/30133283 DC : DRAFT MAY 2005 | IEC 61190-1-2 ED 2 - ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-2: REQUIREMENTS FOR SOLDERING PASTE FOR HIGH-QUALITY INTERCONNECTS IN ELECTRONICS ASSEMBLY |
| 93/408219 DC : MAR 93 | BS 5781 QUALITY ASSURANCE REQUIREMENTS FOR MEASURING EQUIPMENT. PART 2: MEASUREMENT PROCESS CONTROL |
| BS 5750-8:1991 | Quality systems Guide to quality management and quality systems elements for services |
| 04/30116688 DC : DRAFT JUL 2004 | EN 9135 - AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS |
| 12/30260010 DC : 0 | BS EN 16421 - INFLUENCE OF MATERIALS ON WATER FOR HUMAN CONSUMPTION - ENHANCEMENT OF MICROBIAL GROWTH (EMG) |
| BS ISO 3567:2011 | Vacuum gauges. Calibration by direct comparison with a reference gauge |
| 01/707284 DC : DRAFT APR 2001 | IAQS 9100:2001 - AEROSPACE - QUALITY MANAGEMENT SYSTEMS |
| 03/105598 DC : DRAFT MAY 2003 | BS ISO 18899 - RUBBER - GUIDE TO THE CALIBRATION OF TEST EQUIPMENT |
| 04/30086456 DC : DRAFT APR 2004 | BS ISO 11074 - SOIL QUALITY - VOCABULARY |
| MIL S 22710 : E | SWITCHES, ROTARY (PRINTED CIRCUIT), (THUMBWHEEL, INLINE, AND PUSHBUTTON), GENERAL SPECIFICATION FOR |
| XP PREN 9120 : 2004 XP | AEROSPACE SERIES - QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE APPLICABLE TO STOCKIST DISTRIBUTORS |
| ASTM F 1569 : 1994 : R1999 | Standard Guide for Generation of Consensus Reference Materials for Semiconductor Technology (Withdrawn 2003) |
| MIL F 15160 : G | FUSE, INSTRUMENT, POWER, AND TELEPHONE, GENERAL SPECIFICATION FOR |
| MIL-DTL-55353 Revision A:1999 | HEADSET, ELECTRICAL, H-216 A/U |
| MIL-H-10056 Revision F:1995 | HOLDERS (ENCLOSURES), CRYSTAL, GENERAL SPECIFICATION FOR |
| ISO 13683:1997 | Sterilization of health care products Requirements for validation and routine control of moist heat sterilization in health care facilities |
| ASTM D 2632 : 2015 : REDLINE | Standard Test Method for Rubber Property—Resilience by Vertical Rebound |
| SAE ARP5448/1A | Plain Bearing Radial Limit and Ultimate Load Tests |
| SAE AS42701 | Validation Methods For MIL-STD-1760D Mission Stores |
| EIA IS 648 : 1996 | MEASUREMENT OF ELECTROMAGNETIC INTERFERENCE CHARACTERISTICS OF EQUIPMENT INTENDED TO OPERATE IN SEVERE ELECTROMAGNETIC ENVIRONMENTS |
| SAE AS7109B | NADCAP Requirements for Coatings |
| MIL-STD-810 Revision G:2008 | ENVIRONMENTAL ENGINEERING CONSIDERATIONS AND LABORATORY TESTS |
| ASTM F 2511 : 2005 : EDT 1 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| SAE AS18280F | Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi |
| BS EN ISO 11137-1:2015 | Sterilization of health care products. Radiation Requirements for development, validation and routine control of a sterilization process for medical devices |
| S.R. CR 13695-1:2000 | PACKAGING - REQUIREMENTS FOR MEASURING AND VERIFYING THE FOUR HEAVY METALS AND OTHER DANGEROUS SUBSTANCES PRESENT IN PACKAGING AND THEIR RELEASE INTO THE ENVIRONMENT - PART 1: REQUIREMENTS FOR MEASURING AND VERIFYING THE FOUR HEAVY METALS PRESENT IN PACKAGING |
| BS EN ISO 13938-2:1999 | Textiles. Bursting properties of fabrics Pneumatic method for determination of bursting strength and bursting distension |
| DIN EN ISO 13934-2:2014-06 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
| BS EN ISO 14693:2003 | Petroleum and natural gas industries. Drilling and well-servicing equipment |
| ISO 13936-3:2005 | Textiles — Determination of the slippage resistance of yarns at a seam in woven fabrics — Part 3: Needle clamp method |
| BS EN ISO 13937-4:2000 | Textiles. Tear properties of fabrics Determination of tear force of tongue-shaped test specimens (double tear test) |
| EN ISO 11074:2015 | Soil quality - Vocabulary (ISO 11074:2015) |
| API 7K : 2015+ERR 2:2016 | DRILLING AND WELL SERVICING EQUIPMENT |
| EN ISO 5084:1996 | Textiles - Determination of thickness of textiles and textile products (ISO 5084:1996) |
| UNI EN ISO 8655-1 : 2004 | PISTON-OPERATED VOLUMETRIC APPARATUS - PART 1: TERMINOLOGY, GENERAL REQUIREMENTS AND USER RECOMMENDATIONS |
| UNI EN ISO 13934-2 : 2014 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD |
| EN 100114-1 : 1996 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURES - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| IPC 4562 : A | METAL FOIL FOR PRINTED BOARD APPLICATIONS |
| I.S. EN ISO 13937-1:2000 | TEXTILES - TEAR PROPERTIES OF FABRICS - PART 1: DETERMINATION OF TEAR USING BALLISTIC PENDULUM METHOD (ELMENDORF) |
| UNI ISO/TS 29001 : 2008 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - SECTOR-SPECIFIC QUALITY MANAGEMENT SYSTEMS - REQUIREMENTS FOR PRODUCT AND SERVICE SUPPLY ORGANIZATIONS |
| 02/560598 DC : DRAFT FEB 2002 | ISO/DIS 13485 - QUALITY SYSTEMS - MEDICAL DEVICES - SYSTEM REQUIREMENTS FOR REGULATORY PURPOSES |
| PREN ISO 14160 : DRAFT 2009 | STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| API 8C : 2012 | DRILLING AND PRODUCTION HOISTING EQUIPMENT (PSL 1 AND PSL 2) |
| AAMI ISO 11137-1 : 2006 : INC : AMD 1 : 2013 : R201000 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR THE DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 01/713866 DC : DRAFT OCT 2001 | PREN 12258-2 - ALUMINIUM AND ALUMINIUM ALLOYS - TERMS AND DEFINITIONS - PART 2: CHEMICAL ANALYSIS |
| 11/30243401 DC : 0 | BS ISO 3567 - VACUUM GAUGES - CALIBRATION BY DIRECT COMPARISON WITH A REFERENCE GAUGE |
| 03/102999 DC : DRAFT JAN 2003 | BS EN ISO 13936-3 - TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PIN METHOD |
| 09/30211159 DC : 0 | BS EN ISO 22476-9 - GEOTECHNICAL INVESTIGATION AND TESTING - FIELD TESTING - PART 9: FIELD VANE TEST |
| OIML D 10 : 2007 | GUIDELINES FOR THE DETERMINATION OF CALIBRATION INTERVALS OF MEASURING INSTRUMENTS |
| 13/30247136 DC : 0 | BS EN ISO 11074 - SOIL QUALITY - VOCABULARY |
| MIL R 39007 : G (3) SUPP 1A | RESISTORS, FIXED, WIRE-WOUND (POWER TYPE), NONESTABLISHED RELIABILITY, ESTABLISHED RELIABILITY, AND SPACE LEVEL, GENERAL SPECIFICATION FOR |
| MIL R 22097 : G | RESISTORS, VARIABLE, NONWIRE-WOUND (ADJUSTMENT TYPE), GENERAL SPECIFICATION FOR |
| MIL-DTL-38359 Revision E:2011 | CABLE, POWER, ELECTRICAL, AIRPORT LIGHTING, CROSS-LINKED, POLYETHYLENE (XLP) |
| MIL-PRF-83401 Revision H:2006 | RESISTOR NETWORKS, FIXED, FILM AND CAPACITOR-RESISTOR NETWORKS, CERAMIC CAPACITOR AND FIXED, FILM, RESISTORS, GENERAL SPECIFICATION FOR |
| PREN 45001 : DRAFT 1997 | GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| 09/30157765 DC : 0 | BS EN ISO 14160 REV - STERILIZATION OF HEALTH CARE PRODUCTS - LIQUID CHEMICAL STERILIZING AGENTS FOR SINGLE-USE MEDICAL DEVICES UTILIZING ANIMAL TISSUES AND THEIR DERIVATIVES - REQUIREMENTS FOR CHARACTERIZATION, DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| MIL-DTL-52869 Revision C:1997 | Sensor Group, Passive Ultrasonic: Receiver R-1860/FSS-9(V) and Processor MX-9443/FSS-9(V) |
| 04/30081258 DC : DRAFT MARCH 2004 | BS EN ISO 11737-1 - STERILIZATION OF MEDICAL DEVICES - MICROBIOLOGICAL METHODS - PART 1 - DETERMINATION OF A POPULATION OF MICRO ORGANISMS ON PRODUCTS |
| 00/122905 DC : DRAFT JULY 2000 | BS 1339-3 - GUIDE TO THE MEASUREMENT OF HUMIDITY |
| ASTM D 6808 : 2002 : R2012 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| MIL R 22684 : D | RESISTOR, FIXED, FILM, INSULATED, GENERAL SPECIFICATION FOR |
| MIL C 15305 : E | COIL, FIXED AND VARIABLE, RADIO FREQUENCY GENERAL SPECIFICATION FOR |
| MIL S 83505 : B | SOCKET, (LEAD ELECTRONIC COMPONENTS) GENERAL SPECIFICATION FOR |
| MIL F 23419 : E | FUSE, CARTRIDGE, INSTRUMENT TYPE, GENERAL SPECIFICATION FOR |
| MIL-PRF-18546 Revision G:2004 | RESISTOR, FIXED, WIREWOUND (POWER TYPE, CHASSIS MOUNTED), GENERAL SPECIFICATION FOR |
| ISO 3567:2011 | Vacuum gauges — Calibration by direct comparison with a reference gauge |
| 03/103002 DC : DRAFT JAN 2003 | BS ISO 139 - TEXTILES - STANDARD ATMOSPHERES FOR CONDITIONING AND TESTING |
| DSCC 86100 : D | CONNECTORS, ELECTRICAL, UNSHROUDED HEADERS, PWB TERMINATION |
| PREN 9135 : DRAFT 2003 | AEROSPACE SERIES - QUALITY SYSTEMS - SPECIFIC QUALITY REQUIREMENTS FOR NATO SUPPLIERS |
| BIS IS/ISO 13935-2 : 1999 | TEXTILES - SEAM TENSILE PROPERTIES OF FABRICS AND MADE-UP TEXTILE ARTICLES - PART 2: DETERMINATION OF MAXIMUM FORCE TO SEAM RUPTURE USING THE GRAB METHOD |
| BS EN ISO 9000-1:1994 | Quality management and quality assurance standards Guidelines for selection and use |
| SAE AS4510 | Fittings, Weld, Fluid Connection, 5000 psi |
| 15/30330287 DC : DRAFT AUG 2015 | BS EN 60068-3-5 - ENVIRONMENTAL TESTING - PART 3-5: SUPPORTING DOCUMENTATION AND GUIDANCE - CONFIRMATION OF THE PERFORMANCE OF TEMPERATURE CHAMBERS |
| SAE AIR 1678 : 2016 | UNCERTAINTY OF IN-FLIGHT THRUST DETERMINATION |
| CSA ISO 9004-2 : 0 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES |
| SAE AS9006A | Deliverable Aerospace Software Supplement for AS9100AQuality Management Systems - Aerospace - Requirements for Software (based on AS9100A) |
| I.S. EN 2004-7:2017 | AEROSPACE SERIES - TEST METHODS FOR ALUMINIUM AND ALUMINIUM ALLOY PRODUCTS - PART 7: REFERENCE BLOCKS FOR THE CALIBRATION OF MEASURING EQUIPMENT USED IN THE DETERMINATION OF ELECTRICAL CONDUCTIVITY OF WROUGHT ALUMINIUM AND ALUMINIUM ALLOYS |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| ISO 9003:1994 | Quality systems Model for quality assurance in final inspection and test |
| AQAP 130 : 2 | NATO QUALITY ASSURANCE REQUIREMENTS FOR INSPECTION AND TEST |
| ISO/TS 3567:2005 | Vacuum gauges Calibration by direct comparison with a reference gauge |
| AQAP 120 : 2 | NATO QUALITY ASSURANCE REQUIREMENTS FOR PRODUCTION |
| SAE AS 81659 : 2017 | CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR |
| CSA C391 : 2015 | TESTING OF THREE-PHASE SYNCHRONOUS MACHINES DURING REFURBISHMENT |
| ASTM D 6808 : 2002 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| ASTM F 2332 : 2006 : R2013 | Standard Specification for Annular Ball Bearings for Instruments and Precision Rotating Components |
| API 7K CHINESE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
| I.S. ISO 9004-2:1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 2: GUIDELINES FOR SERVICES |
| IEC 63004:2015 | Standard for receiver fixture interface |
| BS EN ISO 13938-1:1999 | Textiles. Bursting properties of fabrics Hydraulic method for determination of bursting strength and bursting distension |
| BS EN ISO 11140-4:2007 | Sterilization of health care products. Chemical indicators Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| BS EN ISO 13937-1:2000 | Textiles. Tear properties of fabrics Determination of tear force using ballistic pendulum method (Elmendorf) |
| BS EN 12258-2:2004 | Aluminium and aluminium alloys. Terms and definitions Chemical analysis |
| ISO 13938-1:1999 | Textiles Bursting properties of fabrics Part 1: Hydraulic method for determination of bursting strength and bursting distension |
| ISO 14111:1997 | Natural gas — Guidelines to traceability in analysis |
| ISO 13934-2:2014 | Textiles Tensile properties of fabrics Part 2: Determination of maximum force using the grab method |
| BS EN ISO 8655-1:2002 | Piston-operated volumetric apparatus Terminology, general requirements and user recommendations |
| BS EN 867-4:2001 | Non-biological systems for use in sterilizers Specification for indicators as an alternative to the Bowie and Dick test for the detection of steam penetration |
| BS EN ISO 13937-2:2000 | Textiles. Tear properties of fabrics Determination of tear force of trouser-shaped test specimens (single tear method) |
| BS EN 13486:2002 | Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream. Periodic verification |
| ISO 11140-4:2007 | Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration |
| UNE-EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| ISO 8655-1:2002 | Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations |
| ISO 13937-3:2000 | Textiles — Tear properties of fabrics — Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) |
| ISO 13535:2000 | Petroleum and natural gas industries Drilling and production equipment Hoisting equipment |
| ISO 13937-1:2000 | Textiles — Tear properties of fabrics — Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) |
| ISO 13937-4:2000 | Textiles — Tear properties of fabrics — Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) |
| ISO 9237:1995 | Textiles — Determination of the permeability of fabrics to air |
| ISO 13938-2:1999 | Textiles Bursting properties of fabrics Part 2: Pneumatic method for determination of bursting strength and bursting distension |
| ISO 14693:2003 | Petroleum and natural gas industries — Drilling and well-servicing equipment |
| BS EN 45012:1998 | General requirements for bodies operating assessment and certification/registration of quality systems |
| BS EN ISO 13934-2:2014 | Textiles. Tensile properties of fabrics Determination of maximum force using the grab method |
| ISO 5436-1:2000 | Geometrical Product Specifications (GPS) — Surface texture: Profile method; Measurement standards — Part 1: Material measures |
| BS EN ISO 13937-3:2000 | Textiles. Tear properties of fabrics Determination of tear force of wing-shaped test specimens (single tear method) |
| ISO 12179:2000 | Geometrical Product Specifications (GPS) Surface texture: Profile method Calibration of contact (stylus) instruments |
| IEC 60761-1:2002 | Equipment for continuous monitoring of radioactivity in gaseous effluents - Part 1: General requirements |
| DIN EN ISO 13936-3:2007-05 | Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method (ISO 13936-3:2005) |
| EN ISO 13937-4:2000 | Textiles - Tear properties of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) (ISO 13937-4:2000) |
| I.S. EN ISO 12179:2000 | GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - SURFACE TEXTURE: PROFILE METHOD - CALIBRATION OF CONTACT (STYLUS) INSTRUMENTS |
| EN ISO 11140-4:2007 | Sterilization of health care products - Chemical indicators - Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (ISO 11140-4:2007) |
| EN ISO 9237:1995 | Textiles - Determination of permeability of fabrics to air (ISO 9237:1995) |
| EN 867-4 : 2000 | NON-BIOLOGICAL SYSTEMS FOR USE IN STERILIZERS- PART 4: SPECIFICATION FOR INDICATORS AS AN ALTERNATIVE TO THE BOWIE AND DICK TEST FOR THE DETECTION OF STEAM PENETRATION |
| EN ISO 13936-3:2007 | Textiles - Determination of the slippage resistance of yarns at a seam in woven fabrics - Part 3: Needle clamp method (ISO 13936-3:2005) |
| EN ISO 11137-1:2015 | Sterilization of health care products - Radiation - Part 1: Requirements for development, validation and routine control of a sterilization process for medical devices (ISO 11137-1:2006, including Amd 1:2013) |
| EN ISO 14111:1999 | Natural gas - Guidelines to traceability in analysis (ISO 14111:1997) |
| EN ISO 13937-2:2000 | Textiles - Tear properties of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) (ISO 13937-2:2000) |
| EN ISO 14693:2003 | Petroleum and natural gas industries - Drilling and well-servicing equipment (ISO 14693:2003) |
| EN ISO 10007 : 1996 | QUALITY MANAGEMENT - GUIDELINES FOR CONFIGURATION MANAGEMENT |
| EN ISO 13934-2:2014 | Textiles - Tensile properties of fabrics - Part 2: Determination of maximum force using the grab method (ISO 13934-2:2014) |
| EN ISO 5436-1:2000 | Geometrical Product Specifications (GPS) - Surface texture: Profile method; Measurement standards - Part 1: Material measures (ISO 5436-1:2000) |
| EN ISO 13535:2000 | Petroleum and natural gas industries - Drilling and production equipment - Hoisting equipment (ISO 13535:2000) |
| EN ISO 13938-1:1999 | Textiles - Bursting properties of fabrics - Part 1: Hydraulic method for determination of bursting strength and bursting distension (ISO 13938-1:1999) |
| EN 1773:1996 | Textiles - Fabrics - Determination of width and length |
| EN ISO 9000-1 : 1994 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE (ISO 9000-1:1994) |
| EN 867-5:2001 | Non-biological systems for use in sterilizers - Part 5: Specification for indicator systems and process challenge devices for use in performance testing for small sterilizers Type B and Type S |
| EN ISO 13937-3:2000 | Textiles - Tear properties of fabrics - Part 3: Determination of tear force of wing-shaped test specimens (Single tear method) (ISO 13937-3:2000) |
| EN 2004-7:2017 | Aerospace series - Test methods for aluminium and aluminium alloy products - Part 7: Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys |
| DEFSTAN 05-94/2(1995) : 1995 | GUIDANCE ON QUALITY SYSTEM REQUIREMENTS FOR THE IMPLEMENTATION OF DEFSTANS 05-91, 05-92 AND 05-93 |
| RG.AERO 00084 : 0 | QUALITY SYSTEM APPLICABLE IN THE AEROSPACE FIELD - MODEL FOR QUALITY ASSURANCE IN PRODUCTION, INSTALLATION AND SERVICING |
| SAE AS 5372 : 2015 | FUSE, CURRENT LIMITER TYPE, AIRCRAFT |
| BS ISO 14654:1999 | Epoxy-coated steel for the reinforcement of concrete |
| BS ISO 15161:2001 | Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| BS IEC 63004:2015 | Standard for receiver fixture interface |
| I.S. EN 45012:1998 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| DIN EN 100114-1:1996-11 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURE - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| 11/30239628 DC : 0 | BS ISO 18602 - PACKAGING AND THE ENVIRONMENT - OPTIMIZATION OF THE PACKAGING SYSTEM |
| BS EN ISO 11074:2015 | Soil quality. Vocabulary |
| MIL-DTL-13931 Revision J:1999 | Cannon: General Specification for |
| RM.AERO 80025 : 1996 | GUIDE FOR OPTIMIZATION OF METROLOGICAL CONFIRMATION INTERVALS OF A MEASURING INSTRUMENT |
| MIL-DTL-55668 Revision D:2009 | CORD, ELECTRICAL; AUDIO, SUBMINIATURE (RETRACTILE AND STRAIGHT) |
| SAE AS 81582 : 2017 | CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| CSA ISO 9000-2 : 0 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GENERIC GUIDELINES FOR THE APPLICATION OF ISO 9001, ISO 9002, AND ISO 9003 |
| DEFSTAN 05-91/2(1995) : 1995 | QUALITY SYSTEM REQUIREMENTS FOR DESIGN/DEVELOPMENT, PRODUCTION, INSTALLATION AND SERVICING |
| PD CR 13695-1:2000 | Packaging. Requirements for measuring and verifying the four heavy metals and other dangerous substances present in packaging and their release into the environment Requirements for measuring and verifying the four heavy metals present in packaging |
| 02/121126 DC : DRAFT MAR 2002 | BS EN ISO 13936-2.2 - TEXTILES - DETERMINATION OF THE SLIPPAGE RESISTANCE OF YARNS AT A SEAM IN WOVEN FABRICS - PART 2: FIXED LOAD METHOD |
| 04/30048301 DC : DRAFT MAY 2004 | BS EN ISO 11137-1 - STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES |
| 12/30258438 DC : 0 | BS EN 61190-1-2 AMD 1ED.2 - ATTACHMENT MATERIALS FOR ELECTRONIC ASSEMBLY - PART 1-2: REQUIREMENTS FOR SOLDERING PASTES FOR HIGH-QUALITY INTERCONNECTS IN ELECTRONICS ASSEMBLY |
| BS EN 2004-7:2017 | Aerospace series. Test methods for aluminium and aluminium alloy products Reference blocks for the calibration of measuring equipment used in the determination of electrical conductivity of wrought aluminium and aluminium alloys |
| MIL-DTL-438 Revision C:2010 | WIRE; PRIMER, ELECTRICAL |
| I.S. CEN TS 15224:2006 | HEALTH SERVICES - QUALITY MANAGEMENT SYSTEMS - GUIDE FOR THE USE OF EN ISO 9001:2000 |
| 06/19977467 DC : DRAFT SEP 2006 | |
| BS EN 60761-1:2004 | Equipment for continuous monitoring radioactivity in gaseous effluents General requirements |
| BS 3156-11.0.3(1997) : 1997 AMD 10655 | ANALYSIS OF FUEL GASES - METHODS FOR NON-MANUFACTURED GASES - GENERAL - GUIDELINES TO TRACEABILITY IN ANALYSIS OF NATURAL GAS |
| 97/402277 DC : DRAFT APR 1997 | PREN 45001 - GENERAL REQUIREMENTS FOR THE COMPETENCE OF TESTING AND CALIBRATION LABORATORIES |
| NF EN 60761-1 : 2005 | EQUIPMENT FOR CONTINUOUS MONITORING RADIOACTIVITY IN GASEOUS EFFLUENTS - PART 1: GENERAL REQUIREMENTS |
| SAE AS7101C | National Aerospace and Defense Contractors Accreditation Program (NADCAP) General Requirements for Materials Test Laboratory Accreditation Program |
| CSA ISO 9000-3 : 1998 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - GUIDELINES FOR THE APPLICATION OF ISO 9001:1994 TO THE DEVELOPMENT, SUPPLY, INSTALLATION AND MAINTENANCE OF COMPUTER SOFTWARE |
| SAE AS81703A | Connectors, Electric, Circular, Miniature, Rack and Panel or Push-Pull Coupling, Environment Resisting |
| SAE AS 40401 : 2013 | SOLENOID, ELECTRICAL, GENERAL SPECIFICATION FOR |
| S.R. ISO TS 16949:2006 | QUALITY MANAGEMENT SYSTEMS - PARTICULAR REQUIREMENTS FOR THE APPLICATION OF ISO 9001:2000 FOR AUTOMOTIVE PRODUCTION AND RELEVANT SERVICE PART ORGANIZATIONS |
| IEEE/ANSI C63.26-2015 | IEEE/ANSI Standard for Compliance Testing of Transmitters Used in Licensed Radio Services |
| ISO 10012-2:1997 | Quality assurance for measuring equipment Part 2: Guidelines for control of measurement processes |
| IPC 4562 CHINESE : A | METAL FOIL FOR PRINTED BOARD APPLICATIONS |
| I.S. EN 100114-1:1997 | RULE OF PROCEDURE - QUALITY ASSESSMENT PROCEDURES - PART 1: CECC REQUIREMENTS FOR THE APPROVAL OF AN ORGANIZATION |
| ISO 15161:2001 | Guidelines on the application of ISO 9001:2000 for the food and drink industry |
| CSA ISO 9004-3 : 1994 | QUALITY MANAGEMENT AND QUALITY SYSTEM ELEMENTS - PART 3: GUIDELINES FOR PROCESSED MATERIALS |
| ASTM D 6808 : 2002 : R2007 | Standard Practice for Competency Requirements of Reference Material Producers for Water Analysis |
| API 7K : 2015 | DRILLING AND WELL SERVICING EQUIPMENT |
| ASTM F 2511 : 2005 : R2013 | Standard Specification for Rollers, Bearing, Needle, Ferrous, Solid |
| API 7K REDLINE : 2010 | DRILLING AND WELL SERVICING EQUIPMENT |
| I.S. EN ISO 9000-1:1994 | QUALITY MANAGEMENT AND QUALITY ASSURANCE STANDARDS - PART 1: GUIDELINES FOR SELECTION AND USE |
| I.S. EN ISO 9003:1994 | QUALITY SYSTEMS - MODEL FOR QUALITY ASSURANCE IN FINAL INSPECTION AND TEST |
| ISO 11074:2015 | Soil quality — Vocabulary |
| DIN EN ISO 11137-1:2015-11 | STERILIZATION OF HEALTH CARE PRODUCTS - RADIATION - PART 1: REQUIREMENTS FOR DEVELOPMENT, VALIDATION AND ROUTINE CONTROL OF A STERILIZATION PROCESS FOR MEDICAL DEVICES (ISO 11137-1:2006, INCLUDING AMD 1:2013) |
| BS EN 12562:1999 | Textiles. Para-aramid multifilament yarns. Test methods |
| IEC PAS 61249-8-1:2014 | Qualification and performance of electrical insulating compound for printed wiring assemblies |
| BS EN ISO 12179:2001 | Geometrical product specifications (GPS). Surface texture. Profile method. Calibration of contact (stylus) instruments |
| 13/30295424 DC : 0 | BS IEC/PAS 61249-8-1 ED.1 - QUALIFICATION AND PERFORMANCE OF ELECTRICAL INSULATING COMPOUND FOR PRINTED WIRING ASSEMBLIES |
| DSCC 99002 : A | TRANSFORMER, SWITCHING |
| EN 60068-3-5:2002 | Environmental testing - Part 3-5: Supporting documentation and guidance - Confirmation of the performance of temperature chambers |
| IPC J STD 006 : C | REQUIREMENTS FOR ELECTRONIC GRADE SOLDER ALLOYS AND FLUXED AND NON-FLUXED SOLID SOLDERS FOR ELECTRONIC SOLDERING APPLICATIONS |
| EN 13486:2001 | Temperature recorders and thermometers for the transport, storage and distribution of chilled, frozen, deep-frozen/quick-frozen food and ice cream - Periodic verification |
| DIN EN ISO 13934-2:1999-04 | TEXTILES - TENSILE PROPERTIES OF FABRICS - PART 2: DETERMINATION OF MAXIMUM FORCE USING THE GRAB METHOD (ISO 13934-2:2014) |
| DIN EN 45012:1990-05 | GENERAL REQUIREMENTS FOR BODIES OPERATING ASSESSMENT AND CERTIFICATION/REGISTRATION OF QUALITY SYSTEMS |
| EN 60761-1:2004 | Equipment for continuous monitoring radioactivity in gaseous effluents - Part 1: General requirements |
| API SPEC 7K:2015+ERR 3:2017 | Drilling and Well Servicing Equipment<br> |
| ASME B89.7.3.1 : 2001 : R2006 | GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS |
| CAN/CSA-ISO 11140-4:18 | CAN/CSA-ISO 11140-4:18 - Sterilization of health care products — Chemical indicators — Part 4: Class 2 indicators as an alternative to the Bowie and Dick-type test for detection of steam penetration (Adopted ISO 11140-4:2007, second edition, 2007-03-15) |
| SAE AS40401 | Solenoid, Electrical, General Specification for |
| I.S. EN 13486:2002 | TEMPERATURE RECORDERS AND THERMOMETERS FOR THE TRANSPORT, STORAGE AND DISTRIBUTION OF CHILLED, FROZEN, DEEP-FROZEN/QUICK-FROZEN FOOD AND ICE CREAM - PERIOD VERIFICATION |
| ASME B89.7.3.1 : 2001 : R2011 | GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS |
| ASME B89.7.3.1 : 2001 | GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS |
| ASME B89.7.3.1 : 2001(R2019) | GUIDELINES FOR DECISION RULES: CONSIDERING MEASUREMENTS UNCERTAINTY IN DETERMINING CONFIRMATION TO SPECIFICATIONS |
| ISO 8402:1994 | Quality management and quality assurance — Vocabulary |
| ISO 9002:1994 | Quality systems — Model for quality assurance in production, installation and servicing |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9003:1994 | Quality systems Model for quality assurance in final inspection and test |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.