ISO 12176-2:2008
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 2: Electrofusion
Amended by
Available format(s)
Hardcopy , PDF
Language(s)
French, English
Published date
03-06-2008
Withdrawn date
02-11-2025
Superseded by
€63.00
Excluding VAT
ISO 12176-2:2008 specifies performance requirements for electrofusion control units for use with polyethylene (PE) electrofusion fittings for the supply of gaseous fuels or for the conveyance of water for human consumption, including raw water prior to treatment and for the conveyance of water for general purpose or other fluids.
The control units are divided into three input voltage classes: SVLV [safety, very low voltage (up to 50 V)], LV [low voltage (50 V to 250 V)] and HV [higher voltage (250 V to 400 V)].
ISO 12176-2:2008 is applicable to electrofusion control units designed for use in the construction of joints between PE pipes and fittings conforming to International Standards for the supply of gaseous fuels or for the conveyance of water, where the normal operating temperature of the control unit is in the range -10 °C to + 40 °C. If temperatures outside this range are expected, suitable operating limits are subject to agreement between manufacturer and purchaser.
ISO 12176-2:2008 is applicable to control units with current or voltage control for fitting systems based on standard resistance wire heating technology.
| Committee |
ISO/TC 138/SC 4
|
| DevelopmentNote |
Supersedes ISO/DIS 12176-2. (06/2008) NEW CHILD AMD 1 2021 IS NOW ADDED.
|
| DocumentType |
Standard
|
| Pages |
20
|
| ProductNote |
NEW CHILD AMD 1 2021 IS NOW ADDED.
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes | |
| UnderRevision |
| Standards | Relationship |
| BS ISO 12176-2:2008 | Identical |
| GOST R ISO 12176-2 : 2011 | Identical |
| DS ISO 12176-2 : 2008 | Identical |
| BS ISO 13951:2015 | Plastics piping systems. Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading |
| 08/30174014 DC : DRAFT JUNE 2008 | BS ISO 11298-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT-PIPES |
| 02/121564 DC : DRAFT APR 2002 | BS EN 14409-3 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE FIT-PIPES |
| 02/123322 DC : DRAFT AUG 2002 | BS ISO 19480 - THERMOPLASTICS PIPES AND FITTINGS FOR THE SUPPLY OF GASEOUS FUELS - TRAINING AND ASSESSMENT OF FUSION-MACHINE OPERATORS |
| 09/30181333 DC : 0 | BS ISO 22621-6 ISO/CD 22621-6 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS FOR MAXIMUM OPERATING PRESSURES UP TO AND INCLUDING 2 MPA (20 BAR) - POLYAMIDE (PA) - PART 6: CODE OF PRACTICE FOR DESIGN, HANDLING AND INSTALLATION |
| 17/30341312 DC : 0 | BS EN ISO 21225-1 - PLASTICS PIPING SYSTEMS FOR THE TRENCHLESS REPLACEMENT OF UNDERGROUND PIPELINE NETWORKS - PART 1: REPLACEMENT ON THE LINE BY PIPE BURSTING AND PIPE EXTRACTION |
| 05/30128654 DC : DRAFT FEB 2005 | EN 1775 - GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| BS ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels. Metric series. Specifications Electrofusion fittings |
| ISO 11296-2:2018 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks — Part 2: Lining with continuous pipes |
| I.S. 820:2010 | NON-DOMESTIC GAS INSTALLATIONS |
| I.S. EN ISO 11297-2:2018 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 2: LINING WITH CONTINUOUS PIPES (ISO 11297-2:2018) |
| ISO 22621-5:2010 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 5: Fitness for purpose of the system |
| DIN EN 12007-2:2012-10 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| EN 12007-2:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
| I.S. EN ISO 1167-4:2007 | THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 4: PREPARATION OF ASSEMBLIES |
| I.S. EN 14408-3:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| I.S. EN 14409-3:2004 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE FIT-PIPES |
| 17/30341315 DC : 0 | BS EN ISO 21225-2 - PLASTICS PIPING SYSTEMS FOR THE TRENCHLESS REPLACEMENT OF UNDERGROUND PIPELINE NETWORKS - PART 2: REPLACEMENT OFF THE LINE BY HORIZONTAL DIRECTIONAL DRILLING AND IMPACT MOLING |
| 02/121566 DC : DRAFT APR 2002 | BS EN 14408-3 - PLASTICS PIPING SYSTEMS FOR THE RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| BS ISO 12176-3:2011 | Plastics pipes and fittings. Equipment for fusion jointing polyethylene systems Operator\'s badge |
| DIN ISO 16486-5:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 5: Fitness for purpose of the system (ISO 16486-5:2012) |
| I.S. EN ISO 11299-3:2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011) |
| ISO 21225-1:2018 | Plastics piping systems for the trenchless replacement of underground pipeline networks — Part 1: Replacement on the line by pipe bursting and pipe extraction |
| I.S. EN ISO 11297-3:2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013) |
| DIN EN ISO 11297-3:2013-11 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11297-3:2013) |
| ISO 11413:2008 | Plastics pipes and fittings — Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
| ISO 14531-4:2006 | Plastics pipes and fittings — Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels — Metric series — Specifications — Part 4: System design and installation guidelines |
| EN ISO 11297-2:2018 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 2: Lining with continuous pipes (ISO 11297-2:2018) |
| ISO 22621-1:2007 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 1: General |
| DIN EN 1775:2007-10 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| DIN EN 14409-3:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| I.S. EN 12007-2:2012 | GAS INFRASTRUCTURE - PIPELINES FOR MAXIMUM OPERATING PRESSURE UP TO AND INCLUDING 16 BAR - PART 2: SPECIFIC FUNCTIONAL REQUIREMENTS FOR POLYETHYLENE (MOP UP TO AND INCLUDING 10 BAR) |
| I.S. EN 1775:2007 | GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS |
| ISO 13951:2015 | Plastics piping systems — Test method for the resistance of plastic pipe/pipe or pipe/fitting assemblies to tensile loading |
| ISO 11298-2:2018 | Plastics piping systems for renovation of underground water supply networks — Part 2: Lining with continuous pipes |
| BS ISO 22621-5:2010 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA) Fitness for purpose of the system |
| NF EN ISO 11298-3 : 2011 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| ISO 11297-2:2018 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure — Part 2: Lining with continuous pipes |
| 16/30315817 DC : 0 | BS EN ISO 11296-2 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 2: LINING WITH CONTINUOUS PIPES |
| 12/30258383 DC : 0 | BS EN ISO 11297-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 3: LINING WITH CLOSE-FIT PIPES |
| 07/30170567 DC : DRAFT AUG 2007 | BS ISO 11413 - PLASTICS PIPES AND FITTINGS - PREPARATION OF TEST PIECE ASSEMBLIES BETWEEN A POLYETHYLENE (PE) PIPE AND AN ELECTROFUSION FITTING |
| 16/30344923 DC : 0 | BS ISO 11413 - PLASTICS PIPES AND FITTINGS - PREPARATION OF TEST PIECE ASSEMBLIES BETWEEN A POLYETHYLENE (PE) PIPE AND AN ELECTROFUSION FITTING |
| I.S. EN ISO 11298-3:2011 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| ISO 22621-6:2010 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar) — Polyamide (PA) — Part 6: Code of practice for design, handling and installation |
| ISO 16486-5:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 5: Fitness for purpose of the system |
| EN ISO 11297-3:2013 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2013) |
| EN ISO 11298-2:2018 | Plastics piping systems for renovation of underground water supply networks - Part 2: Lining with continuous pipes (ISO 11298-2:2018) |
| ISO/TS 10839:2000 | Polyethylene pipes and fittings for the supply of gaseous fuels — Code of practice for design, handling and installation |
| BS EN 14409-3:2004 | Plastics piping systems for renovation of underground water supply networks Lining with close fit pipes |
| BS EN 12007-2:2012 | Gas infrastructure. Pipelines for maximum operating pressure up to and including 16 bar Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
| DIN ISO 16486-6:2015-07 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing - Part 6: Code of practice for design, handling and installation (ISO 16486-6:2012) |
| 12/30264202 DC : 0 | BS EN ISO 11299-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| 11/30242080 DC : DRAFT MAY 2011 | BS ISO 16486-5 - PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINTING AND MECHANICAL JOINTING - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| BS ISO 22621-6:2010 | Plastics piping systems for the supply of gaseous fuels for maximum operating pressures up to and including 2 MPa (20 bar). Polyamide (PA) Code of practice for design, handling and installation |
| BS ISO 11413:2008 | Plastics pipes and fittings. Preparation of test piece assemblies between a polyethylene (PE) pipe and an electrofusion fitting |
| BS EN ISO 11299-3:2013 | Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes |
| I.S. EN ISO 11296-2:2018 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND NON-PRESSURE DRAINAGE AND SEWERAGE NETWORKS - PART 2: LINING WITH CONTINUOUS PIPES (ISO 11296-2:2018) |
| BS EN ISO 11297-3:2013 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure Lining with close-fit pipes |
| ONORM EN ISO 11299-3 : 2013 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011) |
| ISO 11298-3:2010 | Plastics piping systems for renovation of underground water supply networks — Part 3: Lining with close-fit pipes |
| ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings |
| ISO 16486-6:2012 | Plastics piping systems for the supply of gaseous fuels - Unplasticized polyamide (PA-U) piping systems with fusion jointing and mechanical jointing — Part 6: Code of practice for design, handling and installation |
| ISO 12176-3:2011 | Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 3: Operator's badge |
| EN ISO 11299-3:2013 | Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011) |
| EN ISO 11296-2:2018 | Plastics piping systems for renovation of underground non-pressure drainage and sewerage networks - Part 2: Lining with continuous pipes (ISO 11296-2:2018) |
| ISO 1167-4:2007 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 4: Preparation of assemblies |
| BS EN 14408-3:2004 | Plastics piping systems for renovation of underground gas supply networks Lining with close-fit pipes |
| EN 14409-3:2004 | Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close fit-pipes |
| EN 1775:2007 | Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations |
| EN ISO 1167-4:2007 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids - Determination of the resistance to internal pressure - Part 4: Preparation of assemblies (ISO 1167-4:2007) |
| EN 14408-3:2004 | Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes |
| BS ISO 14531-4:2006 | Plastics pipes and fittings. Crosslinked polyethylene (PE-X) pipe systems for the conveyance of gaseous fuels. Metric series. Specifications System design and installation guidelines |
| ISO 11299-3:2011 | Plastics piping systems for renovation of underground gas supply networks — Part 3: Lining with close-fit pipes |
| 10/30206101 DC : 0 | BS ISO 11299-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LIMNING WITH CLOSE-FIT PIPES |
| 17/30361344 DC : 0 | BS EN ISO 11298-3 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| 16/30315811 DC : 0 | BS EN ISO 11297-2 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND DRAINAGE AND SEWERAGE NETWORKS UNDER PRESSURE - PART 2: LINING WITH CONTINUOUS PIPES |
| BS EN ISO 11298-3:2011 | Plastics piping systems for renovation of underground water supply networks Lining with close-fit pipes |
| 16/30315823 DC : 0 | BS EN ISO 11298-2 - PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 2: LINING WITH CONTINUOUS PIPES |
| I.S. EN ISO 11298-2:2018 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 2: LINING WITH CONTINUOUS PIPES (ISO 11298-2:2018) |
| ISO/TS 18226:2006 | Plastics pipes and fittings — Reinforced thermoplastics pipe systems for the supply of gaseous fuels for pressures up to 4 MPa (40 bar) |
| ISO/TR 19480:2005 | Polyethylene pipes and fittings for the supply of gaseous fuels or water — Training and assessment of fusion operators |
| ISO 12176-4:2003 | Plastics pipes and fittings — Equipment for fusion jointing polyethylene systems — Part 4: Traceability coding |
| EN ISO 11298-3:2011 | Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) |
| DIN EN 14408-3:2004-12 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| DIN EN ISO 1167-4:2008-02 | THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 4: PREPARATION OF ASSEMBLIES |
| BS EN 1775:2007 | Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations |
| BS EN ISO 1167-4 : 2008 | THERMOPLASTICS PIPES, FITTINGS AND ASSEMBLIES FOR THE CONVEYANCE OF FLUIDS - DETERMINATION OF THE RESISTANCE TO INTERNAL PRESSURE - PART 4: PREPARATION OF ASSEMBLIES |
| DIN EN ISO 11298-3:2011-07 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND WATER SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES |
| DIN EN ISO 11299-3:2013-05 | PLASTICS PIPING SYSTEMS FOR RENOVATION OF UNDERGROUND GAS SUPPLY NETWORKS - PART 3: LINING WITH CLOSE-FIT PIPES (ISO 11299-3:2011) |
| UNE-EN ISO 11298-3:2011 | Plastics piping systems for renovation of underground water supply networks - Part 3: Lining with close-fit pipes (ISO 11298-3:2010) |
| UNE-EN ISO 11299-3:2014 | Plastics piping systems for renovation of underground gas supply networks - Part 3: Lining with close-fit pipes (ISO 11299-3:2011) |
| UNE-EN 12007-2:2013 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 2: Specific functional requirements for polyethylene (MOP up to and including 10 bar) |
| UNE-EN ISO 11297-3:2014 | Plastics piping systems for renovation of underground drainage and sewerage networks under pressure - Part 3: Lining with close-fit pipes (ISO 11297-3:2013) |
| NBR ISO 16486-6 : 2014 | PLASTICS PIPING SYSTEMS FOR THE SUPPLY OF GASEOUS FUELS - UNPLASTICIZED POLYAMIDE (PA-U) PIPING SYSTEMS WITH FUSION JOINT AND MECHANICAL JOINTING - PART 6: CODE OF PRACTICES FOR PROJECTS, HANDLING AND INSTALLATION |
| IEC 60068-2-27:2008 | Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock |
| ISO 8085-3:2001 | Polyethylene fittings for use with polyethylene pipes for the supply of gaseous fuels — Metric series — Specifications — Part 3: Electrofusion fittings |
| IEC 61558-2-6:2009 | Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safety isolating transformers |
| IEC 61558-1:2017 | Safety of transformers, reactors, power supply units and combinations thereof - Part 1: General requirements and tests |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 60335-2-45:2002+AMD1:2008+AMD2:2011 CSV | Household and similar electrical appliances - Safety - Part 2-45: Particular requirements for portable heating tools and similar appliances |
| ISO 13950:2007 | Plastics pipes and fittings — Automatic recognition systems for electrofusion joints |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.