• Shopping Cart
    There are no items in your cart

ISO 14694:2003

Current

Current

The latest, up-to-date edition.

Industrial fans — Specifications for balance quality and vibration levels

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Published date

14-04-2003

€165.00
Excluding VAT

ISO 14694:2003 gives specifications for vibration and balance limits of fans for all applications except those designed solely for air circulation, for example, ceiling fans and table fans. However, it is limited to fans of all types installed with a power of less than 300 kW or to commercially available standard electric motor with a maximum power of 355 kW (following an R20 series). For fans of greater power than this, the applicable limits are those given in ISO 10816 - 3. Where the fans in an installation have varying powers both above and below 300 kW, and have been the subject of a single contract, then the manufacturer and purchaser shall agree on the appropriate standard to be used. This should normally be based on the majority of units.

Fan-equipment foundations and installation practices are beyond the scope of ISO 14694:2003. Foundation design and fan installation are not normally the responsibilities of the fan manufacturer. It is fully expected that the foundations upon which the fan is mounted will provide the support and stability necessary to meet the vibration criteria of the fan as it is delivered from the factory.

ISO 14694:2003 is intended to cover only the balance or vibration of the fan and does not take into account the effect of fan vibration on personnel, equipment or processes.

Committee
ISO/TC 117
DevelopmentNote
Supersedes ISO/DIS 14694 (04/2003)
DocumentType
Standard
Pages
42
ProductNote
THIS STANDARD ALSO REFERS TO ISO 13347
PublisherName
International Organization for Standardization
Status
Current

Standards Relationship
BS ISO 14694 : 2003 Identical
NEN ISO 14694 : 2003 AMD 1 2010 Identical
NF ISO 14694 : 2003 AMD 1 2011 Identical

DIN EN ISO 13350:2016-02 FANS - PERFORMANCE TESTING OF JET FANS (ISO 13350:2015)
16/30341593 DC : 0 BS ISO 10816-3 - MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU
BS EN ISO 13350:2015 Fans. Performance testing of jet fans
14/30271543 DC : 0 BS EN ISO 13350 - INDUSTRIAL FANS - PERFORMANCE TESTING OF JET FANS
17/30356593 DC : 0 BS EN ISO 15138 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING
UNE-EN ISO 13350:2016 Fans - Performance testing of jet fans (ISO 13350:2015)
BS ISO 13380:2002 Condition monitoring and diagnostics of machines. General guidelines on using performance parameters
04/30115503 DC : DRAFT JUN 2004 EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
I.S. EN ISO 13349:2010 FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES
UNI EN ISO 15138 : 2008 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING
UNI ISO 10816-3 : 2012 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU
08/30183749 DC : 0 BS EN ISO 13349 - FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES
BS 7854-3:1998 Mechanical vibration. Evaluation of machine vibration by measurements on non-rotating parts Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15000 r/min when measured in situ
BS ISO 21940-11:2016 Mechanical vibration. Rotor balancing Procedures and tolerances for rotors with rigid behaviour
17/30341578 DC : DRAFT MAY 2017 BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
15/30290331 DC : 0 BS ISO 21940-11 - MECHANICAL VIBRATION - ROTOR BALANCING - PART 11: PROCEDURES AND TOLERANCES FOR ROTORS WITH RIGID BEHAVIOUR
BS ISO 20816-1:2016 Mechanical vibration. Measurement and evaluation of machine vibration General guidelines
BS ISO 1940-1:2003 Mechanical vibration. Balance quality requirements for rotors in a constant (rigid) state Specification and verification of balance tolerances
BS EN ISO 15138:2007 Petroleum and natural gas industries. Offshore production installations. Heating, ventilation and air-conditioning
PREN 14986 : DRAFT 2014 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
BS ISO 10816-3 : 2009 MECHANICAL VIBRATION - EVALUATION OF MACHINE VIBRATION BY MEASUREMENTS ON NON-ROTATING PARTS - PART 3: INDUSTRIAL MACHINES WITH NOMINAL POWER ABOVE 15 KW AND NOMINAL SPEEDS BETWEEN 120 R/MIN AND 15000 R/MIN WHEN MEASURED IN SITU
I.S. EN 50216-12:2011 POWER TRANSFORMER AND REACTOR FITTINGS - PART 12: FANS
UNE-EN 50216-12:2011 Power transformer and reactor fittings - Part 12: Fans
EN 50216-12:2011 Power transformer and reactor fittings - Part 12: Fans
I.S. EN 14986:2017 DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
BS 848-9:2007 Fans for general purposes. Tolerances, methods of conversion and technical data presentation
BS 848-6(2003) : 2003 FANS FOR GENERAL PURPOSES - METHOD OF MEASUREMENT OF FAN VIBRATION
UNE-EN ISO 13349:2011 Fans - Vocabulary and definitions of categories (ISO 13349:2010)
BS 848-9:2006 Fans for general purposes Tolerances, methods of conversion and technical data presentation
UNI ISO 13380 : 2010 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES ON USING PERFORMANCE PARAMETERS
I.S. EN ISO 15138:2007 PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR-CONDITIONING
DIN ISO 17359:2011-09 CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
UNI EN ISO 13349 : 2011 FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES
DIN ISO 1940-1:2004-04 MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS FOR ROTORS IN A CONSTANT (RIGID) STATE - PART 1: SPECIFICATION AND VERIFICATION OF BALANCE TOLERANCES
PD ISO/TR 19201:2013 Mechanical vibration. Methodology for selecting appropriate machinery vibration standards
14/30294092 DC : 0 BS EN 14986 - DESIGN OF FANS WORKING IN POTENTIALLY EXPLOSIVE ATMOSPHERES
DIN ISO 20816-1:2015-12 (Draft) MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 1: GENERAL GUIDELINES (ISO 20816-1:2016)
DIN ISO 21940-11:2016-01 (Draft) MECHANICAL VIBRATION - ROTOR BALANCING - PART 11: PROCEDURES AND TOLERANCES FOR ROTORS WITH RIGID BEHAVIOUR (ISO 21940-11:2016)
NF ISO 14695 : 2003 INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION
BS EN ISO 13349:2010 Fans — Vocabulary and definitions of categories (ISO 13349:2010)
CEI UNI EN 45510-4-3 : 1999 GUIDE FOR PROCUREMENT OF POWER STATION EQUIPMENT - PART 4-3: BOILER AUXILIARIES - DRAUGHT PLANT
BS ISO 13373-1:2002 Condition monitoring and diagnostics of machines. Vibration condition monitoring General procedures
10/30200372 DC : 0 BS ISO 17359 - CONDITION MONITORING AND DIAGNOSTICS OF MACHINES - GENERAL GUIDELINES
06/30127203 DC : DRAFT OCT 2006 ISO 15138 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - HEATING, VENTILATION AND AIR CONDITIONING
PREN ISO 13349 : DRAFT 2008 FANS - VOCABULARY AND DEFINITIONS OF CATEGORIES
15/30328956 DC : 0 BS ISO 20816-1 - MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF MACHINE VIBRATION - PART 1: GENERAL GUIDELINES
05/30127567 DC : DRAFT JAN 2005 ISO 20283-3 - MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATORY NOISE MEASUREMENT OF SHIPBOARD EQUIPMENT
ISO 21940-11:2016 Mechanical vibration Rotor balancing Part 11: Procedures and tolerances for rotors with rigid behaviour
BS ISO 14695:2003 Industrial fans. Method of measurement of fan vibration
ISO 15138:2007 Petroleum and natural gas industries Offshore production installations Heating, ventilation and air-conditioning
EN ISO 15138:2007 Petroleum and natural gas industries - Offshore production installations - Heating, ventilation and air-conditioning (ISO 15138:2007)
ISO 14695:2003 Industrial fans — Method of measurement of fan vibration
ISO 13349:2010 Fans — Vocabulary and definitions of categories
BS EN 14986:2007 Design of fans working in potentially explosive atmospheres
UNE-EN 14986:2017 Design of fans working in potentially explosive atmospheres
BS EN 45510-4-3:1999 Guide for the procurement of power station equipment. Boiler auxiliaries Draught plant - Draught plant
EN 14986:2017 Design of fans working in potentially explosive atmospheres
EN ISO 13349:2010 Fans - Vocabulary and definitions of categories (ISO 13349:2010)
EN ISO 13350:2015 Fans - Performance testing of jet fans (ISO 13350:2015)
BS ISO 20283-3 : 2006 MECHANICAL VIBRATION - MEASUREMENT OF VIBRATION ON SHIPS - PART 3: PRE-INSTALLATION VIBRATION MEASUREMENT OF SHIPBOARD EQUIPMENT
ISO 20283-3:2006 Mechanical vibration Measurement of vibration on ships Part 3: Pre-installation vibration measurement of shipboard equipment
BS EN 50216-12:2011 Power transformer and reactor fittings Fans
00/713944 DC : DRAFT SEP 2000 ISO/DIS 14695 - INDUSTRIAL FANS - METHOD OF MEASUREMENT OF FAN VIBRATION
01/716227 DC : DRAFT DEC 2001 BS ISO 1940-1 - MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS FOR ROTORS IN A CONSTANT (RIGID) STATE - PART 1: DETERMINATION AND VERIFICATION OF BALANCE TOLERANCES
DIN EN ISO 13349:2012-07 Fans - Vocabulary and definitions of categories (ISO 13349:2010)
ISO 13348:2007 Industrial fans — Tolerances, methods of conversion and technical data presentation
I.S. EN ISO 13350:2015 FANS - PERFORMANCE TESTING OF JET FANS (ISO 13350:2015)
ISO 13350:2015 Fans — Performance testing of jet fans
ISO 13380:2002 Condition monitoring and diagnostics of machines General guidelines on using performance parameters
ISO 17359:2018 Condition monitoring and diagnostics of machines — General guidelines
ISO/TR 19201:2013 Mechanical vibration — Methodology for selecting appropriate machinery vibration standards
ISO 13373-1:2002 Condition monitoring and diagnostics of machines — Vibration condition monitoring — Part 1: General procedures
ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances

ISO 12499:1999 Industrial fans Mechanical safety of fans Guarding
ISO 5802:2001 Industrial fans — Performance testing in situ
ISO 13348:2007 Industrial fans — Tolerances, methods of conversion and technical data presentation
ISO 2953:1999 Mechanical vibration Balancing machines Description and evaluation
ISO 7919-1:1996 Mechanical vibration of non-reciprocating machines Measurements on rotating shafts and evaluation criteria Part 1: General guidelines
AMCA 202 : 2017 TROUBLESHOOTING
ISO 1940-1:2003 Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances
ISO 13351:2009 Fans — Dimensions
ISO 13350:2015 Fans — Performance testing of jet fans
ISO 5801:2017 Fans — Performance testing using standardized airways
ISO 14695:2003 Industrial fans — Method of measurement of fan vibration
ISO 2041:2009 Mechanical vibration, shock and condition monitoring Vocabulary
ISO 8821:1989 Mechanical vibration Balancing Shaft and fitment key convention
ISO 1925:2001 Mechanical vibration Balancing Vocabulary
AMCA 204 : 2005(R2012) BALANCE QUALITY AND VIBRATION LEVELS FOR FANS
IEC 60034-14:2003+AMD1:2007 CSV Rotating electrical machines - Part 14: Mechanical vibration of certain machines with shaft heights 56 mm and higher - Measurement, evaluation and limits of vibration severity
ISO 10816-1:1995 Mechanical vibration Evaluation of machine vibration by measurements on non-rotating parts Part 1: General guidelines
ISO 2954:2012 Mechanical vibration of rotating and reciprocating machinery — Requirements for instruments for measuring vibration severity
ISO 5348:1998 Mechanical vibration and shock Mechanical mounting of accelerometers
ISO 4863:1984 Resilient shaft couplings — Information to be supplied by users and manufacturers
ISO 254:2011 Belt drives — Pulleys — Quality, finish and balance
ISO 13349:2010 Fans — Vocabulary and definitions of categories

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.