ISO 15589-1:2015
Current
Current
The latest, up-to-date edition.
Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline systems — Part 1: On-land pipelines
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
02-03-2015
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 15589-1:2015 specifies requirements and gives recommendations for the pre-installation surveys, design, materials, equipment, installation, commissioning, operation, inspection, and maintenance of cathodic protection systems for on-land pipelines, as defined in ISO 13623 or EN 14161 for the petroleum, petrochemical, and natural gas industries, and in EN 1594 or EN 12007‑1 and EN 12007‑3 used by gas supply industries in Europe.
All contents of this part of ISO 15589 are applicable to on-land pipelines and piping systems used in other industries and transporting other media such as industrial gases, waters, or slurries.
ISO 15589-1:2015 applies to buried pipelines, landfalls of offshore pipeline sections protected by on-shore based cathodic protection installations, and to immersed sections of on-land pipelines such as river or lake crossings.
ISO 15589-1:2015 specifies requirements for pipelines of carbon steel, stainless steel, cast iron, galvanized steel, or copper. If other pipeline materials are used, the criteria to apply are defined under the responsibility of the pipeline operator.
ISO 15589-1:2015 does not apply to pipelines made of reinforced concrete for which EN 12696 can be applied.
NOTE Special conditions sometimes exist where cathodic protection is ineffective or only partially effective. Such conditions can include shielding (e.g. disbonded coatings, thermal-insulating coatings, rocky soil, etc.) and unusual contaminants in the electrolyte.
| Committee |
ISO/TC 67/SC 2
|
| DevelopmentNote |
Supersedes ISO/DIS 15589-1. (03/2015)
|
| DocumentType |
Standard
|
| Pages |
80
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN ISO 15589-1:2017 | Identical |
| I.S. EN ISO 15589-1:2017 | Identical |
| NF EN ISO 15589-1 : 2017 | Identical |
| DIN EN ISO 15589-1:2019-09 | Identical |
| NEN EN ISO 15589-1 : 2017 | Identical |
| NF ISO 15589-1 : 2015 | Identical |
| NS EN ISO 15589-1 : 2017 | Identical |
| ONORM EN ISO 15589-1 : 2018 | Identical |
| UNE-EN ISO 15589-1:2018 | Identical |
| DIN EN 14919-1:2004-06 (Draft) | Corresponds |
| NEN ISO 15589-1 : 2015 | Identical |
| PN EN ISO 15589-1 : 2017 | Identical |
| SN EN ISO 15589-1 : 2018 | Identical |
| UNI EN ISO 15589-1 : 2017 | Identical |
| BS EN ISO 15589-1:2017 | Identical |
| DIN EN 14161:2015-07 | ABSCHLUESSE AUSSEN UND AUSSENJALOUSIEN - LEISTUNGS- UND SICHERHEITSANFORDERUNGEN |
| DIN EN ISO 15589-2 E : 2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012) |
| BS ISO 18086 : 2015 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF AC CORROSION - PROTECTION CRITERIA |
| ISO 16923:2016 | Natural gas fuelling stations — CNG stations for fuelling vehicles |
| UNE-EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
| NACE 35108 : 0 | ONE HUNDRED MILLIVOLT (MV) CATHODIC POLARIZATION CRITERION |
| NACE SP 01 69 : 2013 | CONTROL OF EXTERNAL CORROSION ON UNDERGROUND OR SUBMERGED METALLIC PIPING SYSTEMS |
| PD 8010-4:2012 | Pipeline systems Steel pipelines on land and subsea pipelines. Code of practice for integrity management |
| I.S. EN ISO 16440:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - DESIGN, CONSTRUCTION AND MAINTENANCE OF STEEL CASED PIPELINES (ISO 16440:2016) |
| 14/30286897 DC : 0 | PD 8010-1 - PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
| 13/30266756 DC : 0 | BS ISO 18086 - CORROSION OF METALS AND ALLOYS - DETERMINATION OF AC CORROSION - PROTECTION CRITERION |
| 07/30170577 DC : DRAFT AUG 2007 | BS ISO 13623 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS |
| I.S. EN 14161:2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED) |
| EN ISO 18086:2017 | Corrosion of metals and alloys - Determination of AC corrosion - Protection criteria (ISO 18086:2015) |
| UNI EN ISO 15589-2 : 2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| BS PD8010-1(2015) : 2015 | PIPELINE SYSTEMS - PART 1: STEEL PIPELINES ON LAND - CODE OF PRACTICE |
| 14/30265038 DC : 0 | BS EN ISO 16440 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - DESIGN, CONSTRUCTION AND MAINTENANCE OF STEEL CASED PIPELINES |
| 14/30271613 DC : 0 | BS ISO 15257 - CATHODIC PROTECTION - COMPETENCE LEVELS OF CATHODIC PROTECTION PERSONS - BASIS FOR CERTIFICATION SCHEME |
| BS EN ISO 16923:2018 | Natural gas fuelling stations. CNG stations for fuelling vehicles |
| DIN EN ISO 15257:2016-06 (Draft) | CATHODIC PROTECTION - COMPETENCE LEVELS OF CATHODIC PROTECTION PERSONS - BASIS FOR A CERTIFICATION SCHEME (ISO 15257:2017) |
| BS ISO 15589-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| 10/30232896 DC : 0 | BS ISO 15589-2 - PETROLEUM AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| 11/30201808 DC : 0 | BS PD 8010-4 - CODE OF PRACTICE FOR PIPELINES - PART 4: RISK-BASED INTEGRITY MANAGEMENT OF STEEL PIPELINES ON LAND AND SUB SEA PIPELINES |
| NACE SP 01 15 : 2015 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES |
| ISO 18086:2015 | Corrosion of metals and alloys Determination of AC corrosion Protection criteria |
| ISO 15257:2017 | Cathodic protection — Competence levels of cathodic protection persons — Basis for a certification scheme |
| BS EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries. Cathodic protection of pipeline transportation systems Offshore pipelines |
| 13/30271404 DC : DRAFT DEC 2013 | BS ISO 16923 - NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES |
| DIN EN ISO 16440:2017-07 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS - DESIGN, CONSTRUCTION AND MAINTENANCE OF STEEL CASED PIPELINES (ISO 16440:2016) |
| BS EN ISO 16440:2016 | Petroleum and natural gas industries. Pipeline transportation systems. Design, construction and maintenance of steel cased pipelines |
| ISO 16440:2016 | Petroleum and natural gas industries — Pipeline transportation systems — Design, construction and maintenance of steel cased pipelines |
| BS EN 14161 : 2011 | PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS (ISO 13623:2009 MODIFIED) |
| EN ISO 16440:2016 | Petroleum and natural gas industries - Pipeline transportation systems - Design, construction and maintenance of steel cased pipelines (ISO 16440:2016) |
| EI MODEL CODE SAFE PRACTICE PT1 : 2010 | THE SELECTION, INSTALLATION, INSPECTION, AND MAINTENANCE OF ELECTRICAL AND NON ELECTRICAL APPARATUS IN HAZARDOUS AREAS |
| EN ISO 15589-2:2014 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
| EN ISO 16923:2018 | Natural gas fuelling stations - CNG stations for fuelling vehicles (ISO 16923:2016) |
| EN 14161:2011+A1:2015 | Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) |
| EN ISO 15257:2017 | Cathodic protection - Competence levels of cathodic protection persons - Basis for certification scheme (ISO 15257:2017) |
| BS EN ISO 15257:2017 | Cathodic protection. Competence levels of cathodic protection persons Basis for certification scheme |
| NACE SP 02 07 : 2007 | PERFORMING CLOSE-INTERVAL POTENTIAL SURVEYS AND DC SURFACE POTENTIAL GRADIENT SURVEYS ON BURIED OR SUBMERGED METALLIC PIPELINES |
| I.S. EN ISO 15589-2:2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012) |
| 10/30187796 DC : DRAFT DEC 2010 | BS EN 14161 - PETROLEUM AND NATURAL GAS INDUSTRIES - PIPELINE TRANSPORTATION SYSTEMS |
| DIN EN ISO 15589-2:2014-07 | Petroleum, petrochemical and natural gas industries - Cathodic protection of pipeline transportation systems - Part 2: Offshore pipelines (ISO 15589-2:2012) |
| BS ISO 16923 : 2016 | NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES |
| I.S. EN ISO 15257:2017 | CATHODIC PROTECTION - COMPETENCE LEVELS OF CATHODIC PROTECTION PERSONS - BASIS FOR CERTIFICATION SCHEME (ISO 15257:2017) |
| I.S. EN ISO 18086:2017 | CORROSION OF METALS AND ALLOYS - DETERMINATION OF AC CORROSION - PROTECTION CRITERIA (ISO 18086:2015) |
| I.S. EN ISO 16923:2018 | NATURAL GAS FUELLING STATIONS - CNG STATIONS FOR FUELLING VEHICLES (ISO 16923:2016) |
| ISO 15589-2:2012 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines |
| ONORM EN ISO 15589-2 : 2014 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - CATHODIC PROTECTION OF PIPELINE TRANSPORTATION SYSTEMS - PART 2: OFFSHORE PIPELINES (ISO 15589-2:2012) |
| EN 12732:2013+A1:2014 | Gas infrastructure - Welding steel pipework - Functional requirements |
| EN 12007-3:2015 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 3: Specific functional requirements for steel |
| NACE 35108 : 0 | ONE HUNDRED MILLIVOLT (MV) CATHODIC POLARIZATION CRITERION |
| EN 12007-1:2012 | Gas infrastructure - Pipelines for maximum operating pressure up to and including 16 bar - Part 1: General functional requirements |
| EN 10329:2006 | Steel tubes and fittings for onshore and offshore pipelines - External field joint coatings |
| EN 1594:2013 | Gas infrastructure - Pipelines for maximum operating pressure over 16 bar - Functional requirements |
| EN 14505:2005 | Cathodic protection of complex structures |
| IEC 60079-10-1:2015 | Explosive atmospheres - Part 10-1: Classification of areas - Explosive gas atmospheres |
| MIL A 18001 : K | ANODES, SACRIFICIAL ZINC ALLOY |
| EN 15257:2006 | Cathodic protection - Competence levels and certification of cathodic protection personnel |
| ISO 13847:2013 | Petroleum and natural gas industries — Pipeline transportation systems — Welding of pipelines |
| EN 50443:2011 | Effects of electromagnetic interference on pipelines caused by high voltage a.c. electric traction systems and/or high voltage a.c. power supply systems |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| EN 50164-3 : 2006 AMD 1 2009 | LIGHTNING PROTECTION COMPONENTS (LPC) - PART 3: REQUIREMENTS FOR ISOLATING SPARK GAPS |
| NACE SP 05 72 : 2007 | DESIGN, INSTALLATION, OPERATION, AND MAINTENANCE OF IMPRESSED CURRENT DEEP ANODE BEDS |
| ISO 8044:2015 | Corrosion of metals and alloys Basic terms and definitions |
| EN 12496:2013 | Galvanic anodes for cathodic protection in seawater and saline mud |
| NACE TM 01 08 : 2012 | TESTING OF CATALYZED TITANIUM ANODES FOR USE IN SOILS OR NATURAL WATERS |
| EN 15280:2013 | Evaluation of a.c. corrosion likelihood of buried pipelines applicable to cathodically protected pipelines |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 15589-2:2012 | Petroleum, petrochemical and natural gas industries — Cathodic protection of pipeline transportation systems — Part 2: Offshore pipelines |
| EN 13509:2003 | Cathodic protection measurement techniques |
| IEC 62305-4:2010 | Protection against lightning - Part 4: Electrical and electronic systems within structures |
| EN 12696:2000 | Cathodic protection of steel in concrete |
| EN 50162:2004 | Protection against corrosion by stray current from direct current systems |
| EN 14161:2011+A1:2015 | Petroleum and natural gas industries - Pipeline transportation systems (ISO 13623:2009 modified) |
| ISO 13623:2017 | Petroleum and natural gas industries — Pipeline transportation systems |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.