ISO 15876-5:2017
Current
Current
The latest, up-to-date edition.
Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 5: Fitness for purpose of the system
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
10-01-2017
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 15876-5:2017 specifies the characteristics of the fitness for purpose of polybutene-1 (PB-1) piping systems, intended to be used for hot and cold water installations within buildings for the conveyance of water, whether or not intended for human consumption, (domestic systems) and for heating systems, under design pressures and temperatures according to the class of application (see ISO 15876‑1).
The designation polybutene is used together with the abbreviation PB throughout this document.
ISO 15876-5:2017 covers a range of service conditions (application classes) and design pressure classes. For values of TD, Tmax and Tmal in excess of those in ISO 15876‑1:2016, Table 1, this document does not apply.
NOTE It is the responsibility of the purchaser or specifier to make the appropriate selections from these aspects, taking into account their particular requirements and any relevant national regulations and installation practices or codes.
It also specifies the test parameters for the test methods referred to in this document.
In conjunction with the other parts of ISO 15876, it is applicable to PB pipes, fittings, their joints and to joints with components of other plastics and non-plastics materials intended to be used for hot and cold water installations.
| DevelopmentNote |
Supersedes ISO/DIS 15876-5.2 (12/2003) Supersedes ISO/DIS 15876-5. (01/2017) NEW CHILD AMD 1 2020 IS NOW ADDED
|
| DocumentType |
Standard
|
| Pages |
9
|
| ProductNote |
NEW CHILD AMD 1 2020 IS NOW ADDED
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| SS-EN ISO 15876-5:2017 | Identical |
| I.S. EN ISO 15876-5:2017 | Identical |
| UNE-EN ISO 15876-5:2017 | Identical |
| UNI EN ISO 15876-5:2021 | Identical |
| DIN EN ISO 15876-5:2017-06 | Identical |
| NS EN ISO 15876-5 : 2017 | Identical |
| ONORM EN ISO 15876-5 : 2018 | Identical |
| BS EN ISO 15876-5:2017 | Identical |
| UNI EN ISO 15876-5 : 2005 | Identical |
| PN EN ISO 15876-5 : 2017 | Identical |
| NF EN ISO 15876-5/A1:2020 | Identical |
| UNI EN ISO 15876-5:2017 | Identical |
| SN EN ISO 15876-5 : 2017 | Identical |
| DIN EN ISO 15876-5:2015-08 (Draft) | Identical |
| NEN EN ISO 15876-5 : 2017 | Identical |
| EN ISO 15876-5:2017 | Identical |
| NF EN ISO 15876-5 : 2017 | Identical |
| ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
| UNI EN ISO 21003-1 : 2009 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| 15/30324138 DC : 0 | BS EN ISO 15876-3 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTYLENE (PB) - PART 3: FITTINGS |
| DIN EN 1254-6:2012-12 | Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends |
| 11/30197617 DC : 0 | BS ISO 11855-5 - BUILDING ENVIRONMENT DESIGN - STANDARDS FOR THE DESIGN, CONSTRUCTION AND OPERATION OF RADIANT HEATING AND COOLING SYSTEMS - PART 5: INSTALLATION |
| 07/30160794 DC : 0 | BS EN 15632-2 - DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations. Polybutene (PB) Pipes |
| 05/30132152 DC : DRAFT APR 2005 | ISO 21004 - PLASTICS PIPING SYSTEMS - MULTILAYER PIPES AND THEIR JOINTS, BASED ON THERMOPLASTICS, FOR WATER SUPPLY |
| PREN 1254-6 : DRAFT 2011 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTING WITH PUSH-FIT ENDS |
| I.S. EN 15632-3:2010 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED SYSTEM WITH PLASTIC SERVICE PIPES; REQUIREMENTS AND TEST METHODS |
| I.S. EN ISO 15876-1:2017 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 1: GENERAL (ISO 15876-1:2017) |
| UNE-EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017) |
| 07/30160797 DC : 0 | BS EN 15632-3 - DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| DD ISO/TS 26873:2010 | Plastics pipes and fittings. Definition and construction procedures for reference lines |
| DIN EN ISO 21003-5:2008-11 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| BS EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations. Polybutene (PB) Fittings |
| ONORM EN 1264-4 : 2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| I.S. EN ISO 15876-3:2017 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 3: FITTINGS (ISO 15876-3:2017) |
| BS EN 15632-3 : 2010 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED SYSTEM WITH PLASTIC SERVICE PIPES; REQUIREMENTS AND TEST METHODS |
| DIN EN 14868:2005-11 | PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS |
| I.S. EN 1264-4:2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| ONORM EN ISO 21003-1 : 2012 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL (ISO 21003-1:2008) |
| 15/30324134 DC : 0 | BS EN ISO 15876-2 - PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 2: PIPES |
| 11/30213587 DC : 0 | BS EN 1254-6 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS |
| 07/19990369 DC : 0 | BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION |
| BS EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings General |
| BS EN ISO 21003-5:2008 | Multilayer piping systems for hot and cold water installations inside buildings Fitness for purpose of the system |
| BS EN 15632-2 : 2010 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| UNE 53943:2017 | Plastic networks to centralize water meters. Polyethylene (PE), polypropylene (PP) and polybutylene (PB) networks with butt welded joints |
| EN 1264-4:2009 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| ISO/TS 26873:2010 | Plastics pipes and fittings — Definition and construction procedures for reference lines |
| ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General |
| I.S. EN 15632-2:2010 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
| DIN EN 1264-4:2009-11 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 1: General |
| BS EN 1264-4:2009 | Water based surface embedded heating and cooling systems Installation |
| ONORM EN 15632-2 : 2015 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 2: BONDED PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| ONORM EN 15632-3 : 2015 | DISTRICT HEATING PIPES - PRE-INSULATED FLEXIBLE PIPE SYSTEMS - PART 3: NON BONDED SYSTEM WITH PLASTIC SERVICE PIPES - REQUIREMENTS AND TEST METHODS |
| UNI EN 15015 : 2008 | PLASTICS PIPING SYSTEMS - SYSTEMS FOR HOT AND COLD WATER NOT INTENDED FOR HUMAN CONSUMPTION - PERFORMANCE CHARACTERISTICS FOR PIPES, FITTINGS AND THEIR JOINTS |
| ONORM EN ISO 21003-5 : 2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| ISO 21003-5:2008 | Multilayer piping systems for hot and cold water installations inside buildings — Part 5: Fitness for purpose of the system |
| DIN EN ISO 21003-1:2008-11 | Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008); German version EN ISO 21003-1:2008 |
| BS EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations. Polybutene (PB) General |
| 06/30133717 DC : DRAFT JULY 2006 | ISO 21003-5 - MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| UNI EN 1254-6 : 2012 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS |
| UNI EN 1264-4 : 2009 | WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| DIN EN 15632-2:2015-03 | District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methods (includes Amendment A1:2014) |
| I.S. EN 1254-6:2012 | COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 6: FITTINGS WITH PUSH-FIT ENDS |
| ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
| EN ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 1: General (ISO 15876-1:2017) |
| BS EN 14868:2005 | Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems |
| UNE-EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
| UNE-EN 1264-4:2010 | Water based surface embedded heating and cooling systems - Part 4: Installation |
| BS EN 806-2:2005 | Specifications for installations inside buildings conveying water for human consumption Design |
| EN 14868:2005 | Protection of metallic materials against corrosion - Guidance on the assessment of corrosion likelihood in closed water circulation systems |
| EN 806-2:2005 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| EN ISO 21003-1:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 1: General (ISO 21003-1:2008) |
| EN 15632-2:2010+A1:2014 | District heating pipes - Pre-insulated flexible pipe systems - Part 2: Bonded plastic service pipes - Requirements and test methods |
| EN ISO 21003-5:2008 | Multilayer piping systems for hot and cold water installations inside buildings - Part 5: Fitness for purpose of the system (ISO 21003-5:2008) |
| EN 15632-3:2010+A1:2014 | District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes; requirements and test methods |
| ISO 21004:2006 | Plastics piping systems Multilayer pipes and their joints, based on thermoplastics, for water supply |
| BS EN 1254-6:2012 | Copper and copper alloys. Plumbing fittings Fittings with push-fit ends |
| DIN EN 15632-3:2015-03 | District heating pipes - Pre-insulated flexible pipe systems - Part 3: Non bonded system with plastic service pipes - Requirements and test methods (includes Amendment A1:2014) |
| UNI EN ISO 21003-5 : 2009 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| EN 1254-6:2012 | Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends |
| I.S. EN ISO 15876-2:2017 | PLASTICS PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS - POLYBUTENE (PB) - PART 2: PIPES (ISO 15876-2:2017) |
| UNE-EN 1254-6:2013 | Copper and copper alloys - Plumbing fittings - Part 6: Fittings with push-fit ends |
| 07/30168416 DC : 0 | BS EN 1264-4 - WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION |
| UNI EN 806-2 : 2008 | SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN |
| I.S. EN ISO 21003-1:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 1: GENERAL |
| EN ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 2: Pipes (ISO 15876-2:2017) |
| I.S. EN ISO 21003-5:2008 | MULTILAYER PIPING SYSTEMS FOR HOT AND COLD WATER INSTALLATIONS INSIDE BUILDINGS - PART 5: FITNESS FOR PURPOSE OF THE SYSTEM |
| DIN EN 806-2:2005-06 | Specification for installations inside buildings conveying water for human consumption - Part 2: Design |
| UNE-EN ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations - Polybutene (PB) - Part 3: Fittings (ISO 15876-3:2017) |
| ISO 19892:2011 | Plastics piping systems Thermoplastics pipes and fittings for hot and cold water Test method for the resistance of joints to pressure cycling |
| ISO 1167-2:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids — Determination of the resistance to internal pressure — Part 2: Preparation of pipe test pieces |
| ISO 13056:2011 | Plastics piping systems Pressure systems for hot and cold water Test method for leaktightness under vacuum |
| ISO 1167-4:2007 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 4: Preparation of assemblies |
| ISO 3501:2015 | Plastics piping systems Mechanical joints between fittings and pressure pipes Test method for resistance to pull-out under constant longitudinal force |
| ISO 19893:2011 | Plastics piping systems Thermoplastics pipes and fittings for hot and cold water Test method for the resistance of mounted assemblies to temperature cycling |
| ISO/TS 15876-7:2003 | Plastics piping systems for hot and cold water installations Polybutylene (PB) Part 7: Guidance for the assessment of conformity |
| ISO 15876-1:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 1: General |
| ISO 15876-3:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 3: Fittings |
| ISO 1167-3:2007 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 3: Preparation of components |
| CEN/TR 12108:2012 | Plastics piping systems - Guidance for the installation inside buildings of pressure piping systems for hot and cold water intended for human consumption |
| ISO 15876-2:2017 | Plastics piping systems for hot and cold water installations — Polybutene (PB) — Part 2: Pipes |
| ISO 3503:2015 | Plastics piping systems Mechanical joints between fittings and pressure pipes Test method for leaktightness under internal pressure of assemblies subjected to bending |
| ISO 1167-1:2006 | Thermoplastics pipes, fittings and assemblies for the conveyance of fluids Determination of the resistance to internal pressure Part 1: General method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.