ISO 16426:2002
Current
Current
The latest, up-to-date edition.
Fasteners — Quality assurance system
Available format(s)
PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users , Hardcopy
Language(s)
English, French, Russian
Published date
18-11-2002
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 16426 specifies requirements for a fastener quality assurance system to be met by the fastener manufacturers and distributors. These requirements are intended to reduce or prevent the production of non-conforming fasteners with the objective of approaching zero defects for the characteristics specified.
This International Standard outlines the requirements from receipt of raw material through the manufacturing process to delivery at the distributor or the user, who is the installer.
| Committee |
ISO/TC 2/SC 7
|
| DevelopmentNote |
Supersedes ISO/DIS 16426 (11/2002)
|
| DocumentType |
Standard
|
| Pages |
12
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| JIS B 1092:2006 | Identical |
| GOST R ISO 16426 : 2009 | Identical |
| UNE-EN ISO 16426:2003 | Identical |
| NBN EN ISO 16426 : 2003 | Identical |
| NEN EN ISO 16426 : 2003 | Identical |
| NS EN ISO 16426 : 1ED 2003 | Identical |
| I.S. EN ISO 16426:2002 | Identical |
| PN EN ISO 16426 : 2005 | Identical |
| SN EN ISO 16426 : 2003 | Identical |
| UNI EN ISO 16426 : 2005 | Identical |
| SS-EN ISO 16426:2002 | Identical |
| BS EN ISO 16426:2002 | Identical |
| EN ISO 16426:2002 | Identical |
| NF EN ISO 16426 : 2003 | Identical |
| DIN EN ISO 16426:2003-06 | Identical |
| 12/30259649 DC : 0 | BS ISO 1891-2 - FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS |
| 16/30340613 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| I.S. EN ISO 898-2:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| I.S. EN 1515-4:2009 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| BS EN ISO 10683:2014 | Fasteners. Non-electrolytically applied zinc flake coatings |
| UNE-EN ISO 10683:2015 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| UNE-EN ISO 898-1:2015 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| BS EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Tapping screws |
| ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 2: Nuts |
| BS EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Set screws and similar fasteners not under tensile stress |
| I.S. EN ISO 3506-4:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 4: TAPPING SCREWS |
| DIN EN ISO 10683:2001-02 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| ONORM EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-2:2012) |
| 10/30165716 DC : 0 | BS ISO 898-6 - MECHANICAL PROPERTIES OF FASTENERS - PART 6: NUTS WITH SPECIFIED PROOF LOAD VALUES - FINE PITCH THREAD |
| ISO 16228:2017 | Fasteners — Types of inspection documents |
| 11/30229160 DC : 0 | BS EN ISO 10683 - FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| UNI EN 1515-4 : 2010 | FLANGES AND THEIR JOINTS - BOLTING - PART 4: SELECTION OF BOLTING FOR EQUIPMENT SUBJECT TO THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC |
| ISO 8992:2005 | Fasteners — General requirements for bolts, screws, studs and nuts |
| DIN EN ISO 3506-3:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| DIN EN ISO 3506-4:2010-04 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| DIN EN ISO 898-1:2013-05 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| DIN EN ISO 898-5:2012-09 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| BS EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Bolts, screws and studs |
| BS EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Nuts |
| I.S. EN ISO 898-1:2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-1:2013) |
| I.S. EN ISO 898-5:2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD (ISO 898-5:2012) |
| I.S. EN ISO 3506-3:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| I.S. EN ISO 16228:2018 | FASTENERS - TYPES OF INSPECTION DOCUMENTS (ISO 16228:2017) |
| DIN ISO 8992:2005-09 | Fasteners - General requirements for bolts, screws, studs and nuts (ISO 8992:2005) |
| 15/30280562 DC : 0 | BS EN ISO 16228 - FASTENERS - INSPECTION DOCUMENTS |
| ONORM EN 1515-4 : 2010 | FLANSCHE UND IHRE VERBINDUNGEN - SCHRAUBEN UND MUTTERN - TEIL 4: AUSWAHL VON SCHRAUBEN UND MUTTERN ZUR ANWENDUNG IM GUELTIGKEITSBEREICH DER DRUCKGERAETERICHTLINIE 97/23/EG |
| 10/30165712 DC : 0 | BS ISO 898-2 - MECHANICAL PROPERTIES OF FASTENERS - PART 2: NUTS WITH SPECIFIED PROOF LOAD VALUES; COARSE THREAD |
| BS EN ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Nuts with specified property classes. Coarse thread and fine pitch thread |
| UNI EN ISO 10683 : 2014 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS |
| UNE-EN ISO 898-2:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| EN ISO 16228:2018 | Fasteners - Types of inspection documents (ISO 16228:2017) |
| DIN EN ISO 10683:2016-07 (Draft) | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 4: Tapping screws |
| BS EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
| UNE-EN ISO 3506-2:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| UNI EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 2: NUTS |
| ONORM EN ISO 3506-2 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| UNI EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ONORM EN ISO 3506-1 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| UNI EN ISO 3506-4 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 4: TAPPING SCREWS |
| UNI EN ISO 898-1 : 2013 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 1: BOLTS, SCREWS AND STUDS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| UNI EN ISO 3506-3 : 2010 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS-STEEL FASTENERS - PART 3: SET SCREWS AND SIMILAR FASTENERS NOT UNDER TENSILE STRESS |
| UNI EN ISO 898-5 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 5: SET SCREWS AND SIMILAR THREADED FASTENERS WITH SPECIFIED HARDNESS CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| UNI EN ISO 1891-2 : 2015 | FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS |
| UNE-EN ISO 1891-2:2015 | Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014) |
| 15/30280509 DC : 0 | BS EN ISO 1891-4 - FASTENERS - TERMINOLOGY - PART 4: CONTROLS, INSPECTION, DELIVERY, ACCEPTANCE AND QUALITY |
| BS EN ISO 1891-2:2014 | Fasteners. Terminology Vocabulary and definitions for coatings |
| BS EN 1515-4:2009 | Flanges and their joints. Bolting Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN ISO 1891-2:2014 | Fasteners - Terminology - Part 2: Vocabulary and definitions for coatings (ISO 1891-2:2014) |
| IS 1367 : Part 3 : 2017 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS - PART 3: MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND BOLTS, SCREWS AND STUDS |
| BS EN ISO 16228:2018 | Fasteners. Types of inspection documents |
| UNI EN ISO 898-2 : 2012 | MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 2: NUTS WITH SPECIFIED PROPERTY CLASSES - COARSE THREAD AND FINE PITCH THREAD |
| EN ISO 10683:2014 | Fasteners - Non-electrolytically applied zinc flake coatings (ISO 10683:2014) |
| ASTM F 2688 : 2008 : R2014 : EDT 1 | Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers (Withdrawn 2019) |
| ASTM F 2688 : 2008 : R2014 | Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers |
| EN ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 1: Bolts, screws and studs (ISO 3506-1:2009) |
| I.S. EN ISO 3506-2:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 2: NUTS |
| ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread and fine pitch thread |
| UNE-EN 1515-4:2010 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Part 5: Set screws and similar threaded fasteners with specified hardness classes Coarse thread and fine pitch thread |
| ISO 898-2:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel — Part 2: Nuts with specified property classes — Coarse thread and fine pitch thread |
| UNE-EN ISO 3506-3:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| I.S. EN ISO 3506-1:2009 | MECHANICAL PROPERTIES OF CORROSION-RESISTANT STAINLESS STEEL FASTENERS - PART 1: BOLTS, SCREWS AND STUDS |
| ISO 1891-2:2014 | Fasteners — Terminology — Part 2: Vocabulary and definitions for coatings |
| EN ISO 3506-2:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 2: Nuts (ISO 3506-2:2009) |
| UNE-EN ISO 3506-4:2010 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| EN 1515-4:2009 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| EN ISO 898-1:2013 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) |
| EN ISO 3506-4:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 4: Tapping screws (ISO 3506-4:2009) |
| EN ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners - Part 3: Set screws and similar fasteners not under tensile stress (ISO 3506-3:2009) |
| EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 5: Set screws and similar threaded fasteners with specified hardness classes - Coarse thread and fine pitch thread (ISO 898-5:2012) |
| IS 1367 : Part 1 : 2014 | TECHNICAL SUPPLY CONDITIONS FOR THREADED STEEL FASTENERS PART 1 GENERAL REQUIREMENTS FOR BOLTS, SCREWS, STUDS AND NUTS<br> |
| ASTM F 2688 : 2008 | Standard Guide for System-Based, Customer-Centered Quality Plan for Manufacturers |
| DIN EN 1515-4:2010-04 | Flanges and their joints - Bolting - Part 4: Selection of bolting for equipment subject to the Pressure Equipment Directive 97/23/EC |
| 17/30335249 DC : 0 | BS EN ISO 898-3 - MECHANICAL PROPERTIES OF FASTENERS MADE OF CARBON STEEL AND ALLOY STEEL - PART 3: FLAT WASHERS WITH SPECIFIED PROPERTY CLASSES |
| BS ISO 8992:2005 | Fasteners. General requirements for bolts, screws, studs and nuts |
| I.S. EN ISO 1891-2:2014 | FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS (ISO 1891-2:2014) |
| I.S. EN ISO 10683:2014 | FASTENERS - NON-ELECTROLYTICALLY APPLIED ZINC FLAKE COATINGS (ISO 10683:2014) |
| ISO 10683:2014 | Fasteners Non-electrolytically applied zinc flake coatings |
| ISO 3506-1:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 1: Bolts, screws and studs |
| ISO 3506-3:2009 | Mechanical properties of corrosion-resistant stainless steel fasteners Part 3: Set screws and similar fasteners not under tensile stress |
| BS EN ISO 898-5:2012 | Mechanical properties of fasteners made of carbon steel and alloy steel Set screws and similar threaded fasteners with specified hardness classes. Coarse thread and fine pitch thread |
| DIN EN ISO 898-2:2012-08 | Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012) |
| ONORM EN ISO 1891-2 : 2015 | FASTENERS - TERMINOLOGY - PART 2: VOCABULARY AND DEFINITIONS FOR COATINGS (ISO 1891-2:2014) |
| ISO 15330:1999 | Fasteners — Preloading test for the detection of hydrogen embrittlement — Parallel bearing surface method |
| EN ISO 3269:2000 | FASTENERS - ACCEPTANCE INSPECTION |
| EN ISO 15330:1999 | Fasteners - Preloading test for the detection of hydrogen embrittlement - Parallel bearing surface method (ISO 15330:1999) |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 3269:2000 | Fasteners Acceptance inspection |
| EN ISO 9000:2015 | Quality management systems - Fundamentals and vocabulary (ISO 9000:2015) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.