ISO 16889:2008
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Hydraulic fluid power Filters Multi-pass method for evaluating filtration performance of a filter element
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
25-01-2022
Superseded by
Language(s)
French, English
Published date
03-06-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 16889:2008 describes a multi-pass filtration performance test with continuous contaminant injection for hydraulic fluid power filter elements; a procedure for determining the contaminant capacity, particulate removal and differential pressure characteristics; a test currently applicable to hydraulic fluid power filter elements that exhibit an average filtration ratio greater than or equal to 75 for particle sizes less than or equal to 25 m(c), and a final reservoir gravimetric level of less than 200 mg/L; and a test using ISO medium test dust contaminant and a test fluid.
ISO 16889:2008 is intended to provide a test procedure that yields reproducible test data for appraising the filtration performance of a hydraulic fluid power filter element without influence of electrostatic charge.
ISO 16889:2008 applies to three test conditions: test condition 1, conducted with a base upstream gravimetric level of 3 mg/L; test condition 2, conducted with a base upstream gravimetric level of 10 mg/L; and test condition 3, conducted with a base upstream gravimetric level of 15 mg/L.
| DevelopmentNote |
Supersedes ISO 4572 (07/2000) Supersedes NFPA T3.10.8.8 and NFPA T3.10.8.18 (09/2004) Supersedes ISO/DIS 16889. (06/2008)
|
| DocumentType |
Standard
|
| Pages |
44
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 16889 : 2008 | Identical |
| NF ISO 16889 : 2008 | Identical |
| GOST R ISO 16889 : 2011 | Identical |
| BS ISO 16889 : 2008 | Identical |
| SAC GB/T 18853 : 2002 | Identical |
| UNI ISO 16889 : 2017 | Identical |
| SS-ISO 16889:2011 | Identical |
| DIN ISO 281 Beiblatt 1:2003-04 | ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE - LIFE MODIFICATION FACTOR A[DIN] AND CALCULATION OF THE MODIFIED RATING LIFE |
| MIL-DTL-8815-31 Base Document:2009 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3,000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F |
| BS ISO 16908:2014 | Hydraulic filter element test methods. Thermal conditioning and cold start-up simulation |
| 07/19969755 DC : 0 | BS ISO 11500 - HYDRAULIC FLUID POWER - DETERMINATION OF PARTICULATE CONTAMINATION LEVEL OF A LIQUID SAMPLE BY AUTOMATIC PARTICLE COUNTING USING THE LIGHT EXTINCTION PRINCIPLE |
| BS ISO 14085-3:2015 | Aerospace series. Hydraulic filter elements. Test methods Filtration efficiency and retention capacity |
| 09/30171027 DC : 0 | BS ISO 11171 - HYDRAULIC FLUID POWER - CALIBRATION OF AUTOMATIC PARTICLE COUNTERS FOR LIQUIDS |
| 05/30129166 DC : DRAFT OCT 2005 | BS ISO 281 - ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE |
| BS ISO 281:2007 | Rolling bearings. Dynamic load ratings and rating life |
| API 618 : 2007 : R2016 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines — Part 12: Filtration efficiency using particle counting and contaminant retention capacity |
| SAE J931_201208 | Hydraulic Fluid Power Circuit Filtration - Application & Methods |
| ISO 1219-2:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
| BS ISO 27407:2010 | Hydraulic fluid power. Marking of performance characteristics on hydraulic filters |
| PD ISO/TR 15640:2011 | Hydraulic fluid power contamination control. General principles and guidelines for selection and application of hydraulic filters |
| I.S. EN ISO 10438-1:2007 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
| 08/30168621 DC : DRAFT JAN 2008 | BS ISO 28521 - SHIPS AND MARINE TECHNOLOGY - HYDRAULIC OIL SYSTEMS - GUIDANCE FOR GRADES OF CLEANLINESS AND FLUSHING |
| ISO 16908:2014 | Hydraulic filter element test methods — Thermal conditioning and cold start-up simulation |
| MIL-DTL-8815-32 Base Document:2010 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3000 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, H-60 AIRCRAFT |
| DIN ISO 281:2010-10 | Rolling bearings - Dynamic load ratings and rating life (ISO 281:2007) |
| UNI ISO 5598 : 2012 | FLUID POWER SYSTEMS AND COMPONENTS - VOCABULARY |
| 08/30170008 DC : DRAFT SEP 2008 | BS ISO 27407 - HYDRAULIC FLUID POWER - MARKING OF PERFORMANCE CHARACTERISTICS ON HYDRAULIC FILTERS |
| DIN ISO 281 Beiblatt 5:2011-10 | ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE |
| UNI EN ISO 10438-1 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 1: GENERAL REQUIREMENTS |
| BS ISO 23309:2007 | Hydraulic fluid power systems. Assembled systems. Methods of cleaning lines by flushing |
| I.S. EN 61400-4:2013 | WIND TURBINES - PART 4: DESIGN REQUIREMENTS FOR WIND TURBINE GEARBOXES (IEC 61400-4:2012 (EQV)) |
| 16/30317112 DC : 0 | BS ISO 3968 - HYDRAULIC FLUID POWER - FILTERS - EVALUATION OF DIFFERENTIAL PRESSURE VERSUS FLOW |
| BS ISO 1219-2:2012 | Fluid power systems and components. Graphical symbols and circuit diagrams Circuit diagrams |
| MIL-PRF-83860 Revision D:2013 | FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 MICRON ABSOLUTE |
| 16/30273511 DC : 0 | BS ISO 23309 - HYDRAULIC FLUID POWER SYSTEMS - ASSEMBLED SYSTEMS - METHODS OF CLEANING LINES BY FLUSHING |
| BS ISO 3968:2017 | Hydraulic fluid power. Filters. Evaluation of differential pressure versus flow |
| ISO/TR 16386:2014 | Impact of changes in ISO fluid power particle counting Contamination control and filter test standards |
| ISO 27407:2010 | Hydraulic fluid power Marking of performance characteristics on hydraulic filters |
| SAE AIR 1922 : 2017 | AEROSPACE - SYSTEM INTEGRATION FACTORS THAT AFFECT HYDRAULIC PUMP LIFE |
| ISO 11500:2008 | Hydraulic fluid power — Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| ISO/TR 16144:2002 | Hydraulic fluid power Calibration of liquid automatic particle counters Procedures used to certify the standard reference material SRM 2806 |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| API 614 REDLINE : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| ISO 21018-4:2016 | Hydraulic fluid power Monitoring the level of particulate contamination in the fluid Part 4: Use of the light extinction technique |
| ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries — Lubrication, shaft-sealing and control-oil systems and auxiliaries — Part 1: General requirements |
| UNI EN ISO 10438-3 : 2009 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - LUBRICATION, SHAFT-SEALING AND CONTROL-OIL SYSTEMS AND AUXILIARIES - PART 3: GENERAL-PURPOSE OIL SYSTEMS |
| DIN ISO 281 Beiblatt 3:2009-07 | ROLLING BEARINGS - DYNAMIC LOAD RATINGS AND RATING LIFE - SUPPLEMENT 3: ESTIMATING OF THE CONTAMINATION FACTOR RESPECTIVELY THE CONTAMINATION LEVEL FOR ROLLING BEARINGS IN CLOSED INDUSTRIAL GEAR UNITS |
| BS ISO 11170:2013 | Hydraulic fluid power. Sequence of tests for verifying performance characteristics of filter elements |
| BS ISO 11171:2016 | Hydraulic fluid power. Calibration of automatic particle counters for liquids |
| ISO 11170:2013 | Hydraulic fluid power — Sequence of tests for verifying performance characteristics of filter elements |
| 13/30271035 DC : 0 | BS ISO 14085-3 - AEROSPACE SERIES - HYDRAULIC FILTER ELEMENTS - TEST METHODS - PART 3: FILTRATION EFFICIENCY AND RETENTION CAPACITY |
| DD ISO/TR 16144:2002 | Hydraulic fluid power. Calibration of liquid automatic particle counters. Procedures used to certify the standard reference material SRM 2806 |
| 17/30360001 DC : 0 | BS ISO 21018-4 - HYDRAULIC FLUID POWER - MONITORING THE LEVEL OF PARTICULATE CONTAMINATION IN THE FLUID - PART 4: USE OF THE LIGHT EXTINCTION TECHNIQUE |
| BS ISO 11500:2008 | Hydraulic fluid power. Determination of the particulate contamination level of a liquid sample by automatic particle counting using the light-extinction principle |
| 09/30196676 DC : DRAFT OCT 2009 | BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
| SAE ARP5454B | Multi-Pass Method for Evaluating Filtration Performance of Fine Lube Filter Elements Utilized in Aerospace Power and Propulsion Lubrication Systems |
| MIL-PRF-83861 Revision D:2013 | FILTER ELEMENTS, DISPOSABLE, FLUID PRESSURE, HYDRAULIC LINE, 5 AND 15 MICRON ABSOLUTE |
| ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
| BS ISO 5598:2008 | Fluid power systems and components. Vocabulary |
| ISO 11943:1999 | Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation |
| ISO 28521:2009 | Ships and marine technology — Hydraulic oil systems — Guidance for grades of cleanliness and flushing |
| ISO 3968:2017 | Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow |
| ISO/TR 15640:2011 | Hydraulic fluid power contamination control General principles and guidelines for selection and application of hydraulic filters |
| API STD 17F : 2017 | SUBSEA PRODUCTION CONTROL SYSTEMS |
| SAE J2312_201305 | Automatic Transmission Intake Filter Test Procedure |
| ISO 81400-4:2005 | Wind turbines Part 4: Design and specification of gearboxes |
| BS EN ISO 20763:2004 | Petroleum and related products. Determination of anti-wear properties of hydraulic fluids. Vane pump method |
| BS ISO/TR 16386:1999 | Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
| UNE-EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| BS EN ISO 10438-1:2003 | Petroleum, petrochemical and natural gas industries. Lubrication, shaft-sealing and control-oil systems and auxiliaries General requirements |
| ISO 20763:2004 | Petroleum and related products — Determination of anti-wear properties of hydraulic fluids — Vane pump method |
| DIN EN ISO 20763:2004-10 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004) |
| EN ISO 10438-1:2007 | Petroleum, petrochemical and natural gas industries - Lubrication, shaft-sealing and control-oil systems and auxiliaries - Part 1: General requirements (ISO 10438-1:2007) |
| EN ISO 20763:2004 | Petroleum and related products - Determination of anti-wear properties of hydraulic fluids - Vane pump method (ISO 20763:2004) |
| API 618 : 2007 | RECIPROCATING COMPRESSORS FOR PETROLEUM, CHEMICAL, AND GAS INDUSTRY SERVICES |
| 15/30321906 DC : 0 | BS ISO 11943 - HYDRAULIC FLUID POWER - ON-LINE AUTOMATIC PARTICLE-COUNTING SYSTEMS FOR LIQUIDS - METHODS OF CALIBRATION AND VALIDATION |
| PD ISO/TR 16386:2014 | Impact of changes in ISO fluid power particle counting. Contamination control and filter test standards |
| 02/122677 DC : DRAFT JUN 2002 | ISO/DIS 20763 - PETROLEUM AND RELATED PRODUCTS - DETERMINATION OF ANTI-WEAR PROPERTIES OF HYDRAULIC FLUIDS - VANE PUMP METHOD |
| 12/30250727 DC | BS EN ISO 13628-6 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 6: SUBSEA PRODUCTION CONTROL SYSTEMS |
| BS EN 61400-4:2013 | Wind turbines Design requirements for wind turbine gea |
| SAE ARP1827C | Measuring Aircraft Gas Turbine Engine Fine Fuel Filter Element Performance |
| BS ISO 4548-12:2017 | Methods of test for full-flow lubricating oil filters for internal combustion engines Filtration efficiency using particle counting and contaminant retention capacity |
| 17/30356394 DC : 0 | BS ISO 9206 ED 3 - AEROSPACE - FIXED DISPLACEMENT HYDRAULIC MOTORS - GENERAL SPECIFICATIONS |
| 11/30214548 DC : 0 | BS ISO 11170 - HYDRAULIC FLUID POWER - SEQUENCE OF TESTS FOR VERIFYING PERFORMANCE CHARACTERISTICS OF FILTER ELEMENTS |
| 98/717481 DC : DRAFT DEC 1998 | ISO/CD 16009 - HYDRAULIC FLUID POWER - FILTER - METHOD FOR DETERMINING FILTRATION PERFORMANCE OF AN OFF-LINE ELEMENT |
| BS ISO 81400-4:2005 | Wind turbines Design and specification of gearboxes |
| 04/30098083 DC : DRAFT APR 2004 | ISO 16232-2 - ROAD VEHICLES - FLUID CIRCUITS - CLEANLINESS OF COMPONENTS - PART 2: METHOD OF EXTRACTION OF CONTAMINANTS BY AGITATION |
| MIL-DTL-8815-33 Base Document:2011 | FILTER ELEMENTS, NON-CLEANABLE, FLUID PRESSURE, HYDRAULIC LINE, 3500 PSI, 5 MICRON ABSOLUTE, -65 DEGREES F TO 275 DEGREES F, AVIATION GROUND POWER UNIT (AGPU) |
| SAE AIR 887 : 2013 | LIQUID FILTER RATINGS, PARAMETERS AND TESTS |
| SAE AS4941B | Aerospace - General Requirements for Commercial Aircraft Hydraulic Components |
| ISO 14085-3:2015 | Aerospace series — Hydraulic filter elements — Test methods — Part 3: Filtration efficiency and retention capacity |
| NF ISO 11171 : 2011 | HYDRAULIC FLUID POWER - CALIBRATION OF AUTOMATIC PARTICLE COUNTERS FOR LIQUIDS |
| ASTM D 7467 : 2017-03 | SPECIFICATION FOR DIESEL FUEL OIL, BIODIESEL BLEND (B6 TO B20) |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| BS ISO 21018-4:2016 | Hydraulic fluid power. Monitoring the level of particulate contamination in the fluid Use of the light extinction technique |
| API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| ISO 23309:2007 | Hydraulic fluid power systems Assembled systems Methods of cleaning lines by flushing |
| EN 61400-4:2013 | Wind turbines - Part 4: Design requirements for wind turbine gearboxes |
| SAE J2321_200212 | Ship Systems and Equipment—General Specification for Filter Elements—Hydraulic and Lube Oil Service |
| ISO/IEC 17025:2005 | General requirements for the competence of testing and calibration laboratories |
| ISO 3968:2017 | Hydraulic fluid power — Filters — Evaluation of differential pressure versus flow |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO/TR 16144:2002 | Hydraulic fluid power Calibration of liquid automatic particle counters Procedures used to certify the standard reference material SRM 2806 |
| ISO 11943:1999 | Hydraulic fluid power On-line automatic particle-counting systems for liquids Methods of calibration and validation |
| ISO/TR 16386:2014 | Impact of changes in ISO fluid power particle counting Contamination control and filter test standards |
| ISO 3722:1976 | Hydraulic fluid power — Fluid sample containers — Qualifying and controlling cleaning methods |
| ISO 11171:2016 | Hydraulic fluid power Calibration of automatic particle counters for liquids |
| ISO 2942:2004 | Hydraulic fluid power Filter elements Verification of fabrication integrity and determination of the first bubble point |
| ISO 1219-1:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 1: Graphical symbols for conventional use and data-processing applications |
| ISO 12103-1:2016 | Road vehicles — Test contaminants for filter evaluation — Part 1: Arizona test dust |
| ISO 4021:1992 | Hydraulic fluid power — Particulate contamination analysis — Extraction of fluid samples from lines of an operating system |
| ISO 4405:1991 | Hydraulic fluid power — Fluid contamination — Determination of particulate contamination by the gravimetric method |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.