ISO 16911-1:2013
Current
The latest, up-to-date edition.
Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 1: Manual reference method
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
01-03-2013
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 16911-1:2013 specifies a method for periodic determination of the axial velocity and volume flow rate of gas within emissions ducts and stacks. It is applicable for use in circular or rectangular ducts with measurement locations meeting the requirements of EN 15259. Minimum and maximum duct sizes are driven by practical considerations of the measurement devices described within ISO 16911-1:2013.
ISO 16911-1:2013 requires all flow measurements to have demonstrable metrological traceability to national or international primary standards.
To be used as a standard reference method, the user is required to demonstrate that the performance characteristics of the method are equal to or better than the performance criteria defined in ISO 16911-1:2013 and that the overall uncertainty of the method, expressed with a level of confidence of 95 %, is determined and reported. The results for each method defined in ISO 16911-1:2013 have different uncertainties within a range of 1 % to 10 % at flow velocities of 20 m/s.
Methods further to these can be used provided that the user can demonstrate equivalence, based on the principles of CEN/TS 14793.
| DevelopmentNote |
Supersedes ISO/DIS 16911-1. (03/2013)
|
| DocumentType |
Standard
|
| Pages |
84
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| NF EN ISO 16911-1 : 2013 | Identical |
| NBN EN ISO 16911-1 : 2013 | Identical |
| NEN EN ISO 16911-1 : 2013 | Identical |
| NS EN ISO 16911-1 : 2013 | Identical |
| I.S. EN ISO 16911-1:2013 | Identical |
| PN EN ISO 16911-1 : 2013 | Identical |
| SN EN ISO 16911-1:2013 | Identical |
| UNI EN ISO 16911-1 : 2013 | Identical |
| UNE-EN ISO 16911-1:2013 | Identical |
| BS EN ISO 16911-1:2013 | Identical |
| EN ISO 16911-1:2013 | Identical |
| DIN EN ISO 16911-1:2013-06 | Identical |
| BS ISO 17211:2015 | Stationary source emissions. Sampling and determination of selenium compounds in flue gas |
| PD CEN/TS 1948-5:2015 | Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs Long-term sampling of PCDDs/PCDFs and PCBs |
| I.S. EN 19694-1:2016 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS |
| CEN/TS 1948-5:2015 | Stationary source emissions - Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs - Part 5: Long-term sampling of PCDDs/PCDFs and PCBs |
| BS EN 13284-1:2017 | Stationary source emissions. Determination of low range mass concentration of dust Manual gravimetric method |
| 14/30303591 DC : 0 | BS EN ISO 19694-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF GREENHOUSE GAS (GHG) EMISSIONS IN ENERGY-INTENSIVE INDUSTRIES - PART 1: GENERAL ASPECTS |
| VDI 2594:2015-09 | Emission control - Pulp production in the sugar industry |
| 14/30251849 DC : 0 | BS ISO 17211 - STATIONARY SOURCE EMISSIONS - SAMPLING AND DETERMINATION OF SELENIUM COMPOUNDS IN FLUE GAS |
| S.R. CEN/TR 17078:2017 | STATIONARY SOURCE EMISSIONS - GUIDANCE ON THE APPLICATION OF EN ISO 16911-1 |
| BS EN 19694-1:2016 | Stationary source emissions. Determination of greenhouse gas (GHG) emissions in energy-intensive industries General aspects |
| EN 19694-1:2016 | Stationary source emissions - Determination of greenhouse gas (GHG) emissions in energy-intensive industries - Part 1: General aspects |
| PD CEN/TR 17078:2017 | Stationary source emissions. Guidance on the application of EN ISO 16911-1 |
| 15/30323534 DC : 0 | BS EN 13284-1 - STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 1: MANUAL GRAVIMETRIC METHOD |
| ISO 17211:2015 | Stationary source emissions Sampling and determination of selenium compounds in flue gas |
| S.R. CEN/TS 1948-5:2015 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF PCDDS/PCDFS AND DIOXIN-LIKE PCBS - PART 5: LONG-TERM SAMPLING OF PCDDS/PCDFS AND PCBS |
| I.S. EN 13284-1:2017 | STATIONARY SOURCE EMISSIONS - DETERMINATION OF LOW RANGE MASS CONCENTRATION OF DUST - PART 1: MANUAL GRAVIMETRIC METHOD |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| CEN/TR 17078:2017 | Stationary source emissions - Guidance on the application of EN ISO 16911-1 |
| EN 15267-3:2007 | Air quality - Certification of automated measuring systems - Part 3: Performance criteria and test procedures for automated measuring systems for monitoring emissions from stationary sources |
| BS 5857-1.4:1980 | Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of water flow Transit time method using non-radioactive tracers |
| BS 5857-2.4:1980 | Methods for measurement of fluid flow in closed conduits, using tracers. Measurement of gas flow Transit time method using radioactive tracers |
| ISO 1928:2009 | Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value |
| CEN/TS 14793:2005 | Stationary source emission - Intralaboratory validation procedure for an alternative method compared to a reference method |
| ISO 14956:2002 | Air quality — Evaluation of the suitability of a measurement procedure by comparison with a required measurement uncertainty |
| ISO 1170:2013 | Coal and coke Calculation of analyses to different bases |
| ECA 4-02 : 2013 | EVALUATION OF THE UNCERTAINTY OF MEASUREMENT IN CALIBRATION |
| EN 14789:2017 | Stationary source emissions - Determination of volume concentration of oxygen - Standard reference method: Paramagnetism |
| EN 15259:2007 | Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report |
| EN 13284-1:2017 | Stationary source emissions - Determination of low range mass concentration of dust - Part 1: Manual gravimetric method |
| EN 14181:2014 | Stationary source emissions - Quality assurance of automated measuring systems |
| EN 437:2003+A1:2009 | Test gases - Test pressures - Appliance categories |
| EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| EN 14790:2017 | Stationary source emissions - Determination of the water vapour in ducts - Standard reference method |
| ISO 20988:2007 | Air quality Guidelines for estimating measurement uncertainty |
| ISO 10780:1994 | Stationary source emissions — Measurement of velocity and volume flowrate of gas streams in ducts |
| ISO 3966:2008 | Measurement of fluid flow in closed conduits Velocity area method using Pitot static tubes |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.