ISO 18095:2018
Current
The latest, up-to-date edition.
Condition monitoring and diagnostics of power transformers
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
French, English
15-02-2018
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 18095:2018 gives guidelines for the monitoring techniques to be considered when setting up a condition monitoring programme for power transformers and includes references to associated standards required in this process. It is intended to help in the implementation of a coherent condition monitoring and condition-based maintenance programme, such as described following ISO 17359.
ISO 18095:2018 is applicable to single-phase alternating current power transformers of ≥ 1 kVA and three phase alternating current power transformers of ≥ 5 kVA.
| Committee |
ISO/TC 108/SC 5
|
| DevelopmentNote |
Supersedes ISO/DIS 18095. (02/2018)
|
| DocumentType |
Standard
|
| Pages |
52
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Standards | Relationship |
| BS ISO 18095:2018 | Identical |
| ISO 3016:1994 | Petroleum products Determination of pour point |
| ISO 2719:2016 | Determination of flash point — Pensky-Martens closed cup method |
| IEC 60270:2000+AMD1:2015 CSV | High-voltage test techniques - Partial discharge measurements |
| IEC 60076-7:2005 | Power transformers - Part 7: Loading guide for oil-immersed power transformers |
| IEC 61125:1992 | Unused hydrocarbon based insulating liquids - Test methods for evaluating the oxidation stability |
| ISO 3675:1998 | Crude petroleum and liquid petroleum products Laboratory determination of density Hydrometer method |
| IEC 60422:2013 | Mineral insulating oils in electrical equipment - Supervision and maintenance guidance |
| IEC 60156:1995 | Insulating liquids - Determination of the breakdown voltage at power frequency - Test method |
| IEC 60599:2015 | Mineral oil-filled electrical equipment in service - Guidance on the interpretation of dissolved and free gases analysis |
| EN 14210:2003 | Surface active agents - Determination of interfacial tension of solutions of surface active agents by the stirrup or ring method |
| IEC 60076-10:2016 | Power transformers - Part 10: Determination of sound levels |
| IEC 60076-5:2006 | Power transformers - Part 5: Ability to withstand short circuit |
| IEC 62535:2008 | Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil |
| IEC 60475:2011 | Method of sampling insulating liquids |
| IEEE C57.19.00 : 2004 | GENERAL REQUIREMENTS AND TEST PROCEDURE FOR POWER APPARATUS BUSHINGS |
| IEC 60076-4:1976 | Power transformers - Part 4: Tappings and connections |
| IEC 60076-8:1997 | Power transformers - Part 8: Application guide |
| ASTM D 1275 : 2015 | Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids |
| IEEE C57.104-2008 | IEEE Guide for the Interpretation of Gases Generated in Oil-Immersed Transformers |
| IEC 60970:2007 | Insulating liquids - Methods for counting and sizing particles |
| ISO 13372:2004 | Condition monitoring and diagnostics of machines Vocabulary |
| IEC 60076-3:2013 | Power transformers - Part 3: Insulation levels, dielectric tests and external clearances in air |
| ISO 29821-1:2011 | Condition monitoring and diagnostics of machines Ultrasound Part 1: General guidelines |
| IEC 60076-1:2011 | Power transformers - Part 1: General |
| IEC 60076-6:2007 | Power transformers - Part 6: Reactors |
| IEC 62697-1:2012 | Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS) |
| IEC 60666:2010 | Detection and determination of specified additives in mineral insulating oils |
| IEC 60814:1997 | Insulating liquids - Oil-impregnated paper and pressboard - Determination of water by automatic coulometric Karl Fischer titration |
| IEC 60076-2:2011 | Power transformers - Part 2: Temperature rise for liquid-immersed transformers |
| IEC 60247:2004 | Insulating liquids - Measurement of relative permittivity, dielectric dissipation factor (tan d) and d.c. resistivity |
| ISO 2049:1996 | Petroleum products Determination of colour (ASTM scale) |
| IEC 61619:1997 | Insulating liquids - Contamination by polychlorinated biphenyls (PCBs) - Method of determination by capillary column gas chromatography |
| ISO 18434-1:2008 | Condition monitoring and diagnostics of machines — Thermography — Part 1: General procedures |
| ISO 17359:2011 | Condition monitoring and diagnostics of machines General guidelines |
| IEC 60214-1:2014 | Tap-changers - Part 1: Performance requirements and test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.