• ASTM D 1275 : 2015

    Current The latest, up-to-date edition.

    Standard Test Method for Corrosive Sulfur in Electrical Insulating Liquids

    Available format(s):  Hardcopy, PDF

    Language(s):  English

    Published date:  15-11-2015

    Publisher:  American Society for Testing and Materials

    Add To Cart

    Abstract - (Show below) - (Hide below)

    CONTAINED IN VOL. 10.03, 2016 Defines the detection of corrosive sulfur compounds (both inorganic and organic) in electrical insulating liquids.

    Scope - (Show below) - (Hide below)

    1.1This test method describes the detection of corrosive sulfur compounds (both inorganic and organic) in electrical insulating liquids.

    1.2New and in-service insulating liquids may contain elemental sulfur or sulfur compounds, or both, that cause corrosion under certain conditions of use. This test method is designed to detect the presence of, or the propensity to form, free (elemental) sulfur and corrosive sulfur compounds by subjecting copper or silver to contact with an insulating liquid under prescribed conditions.

    1.3The values stated in SI units are to be regarded as the standard. Inch-pound units are included for informational purposes.

    1.4This standard does not purport to address the safety concerns, if any, associated with its use. It is the responsibility of the user of this standard to establish appropriate safety and health practices and determine the applicability of regulatory limitations prior to use.

    General Product Information - (Show below) - (Hide below)

    Committee D 27
    Development Note Supersedes ASTM D 989. (02/2002)
    Document Type Test Method
    Publisher American Society for Testing and Materials
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    12/30257150 DC : 0 BS EN 62770 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS LIQUIDS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
    IEEE C57.152 : 2013 GUIDE FOR DIAGNOSTIC FIELD TESTING OF FLUID-FILLED POWER TRANSFORMERS, REGULATORS, AND REACTORS
    PD IEC/TR 62697-3:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids Test method for quantitative determination of elemental sulfur
    IEEE C57.637 : 2015 GUIDE FOR THE RECLAMATION OF MINERAL INSULATING OIL AND CRITERIA FOR ITS USE
    IEEE 1277 : 2010 GENERAL REQUIREMENTS AND TEST CODE FOR DRY-TYPE AND OIL-IMMERSED SMOOTHING REACTORS FOR DC POWER TRANSMISSION
    EN 62535 : 2009 INSULATING LIQUIDS - TEST METHOD FOR DETECTION OF POTENTIALLY CORROSIVE SULPHUR IN USED AND UNUSED INSULATING OIL
    EN 62697-1 : 2012 TEST METHODS FOR QUANTITATIVE DETERMINATION OF CORROSIVE SULFUR COMPOUNDS IN UNUSED AND USED INSULATING LIQUIDS - PART 1: TEST METHOD FOR QUANTITATIVE DETERMINATION OF DIBENZYLDISULFIDE (DBDS) (IEC 62697-1:2012)
    I.S. EN 60422:2013 MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE (IEC 60422:2013 (EQV))
    I.S. EN 62535:2009 INSULATING LIQUIDS - TEST METHOD FOR DETECTION OF POTENTIALLY CORROSIVE SULPHUR IN USED AND UNUSED INSULATING OIL
    I.S. EN 62697-1:2012 TEST METHODS FOR QUANTITATIVE DETERMINATION OF CORROSIVE SULFUR COMPOUNDS IN UNUSED AND USED INSULATING LIQUIDS - PART 1: TEST METHOD FOR QUANTITATIVE DETERMINATION OF DIBENZYLDISULFIDE (DBDS) (IEC 62697-1:2012 (EQV))
    ASTM D 117 : 2018 Standard Guide for Sampling, Test Methods, and Specifications for Electrical Insulating Liquids
    ASTM D 5222 : 2016 Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
    ASTM D 6871 : 2017 Standard Specification for Natural (Vegetable Oil) Ester Fluids Used in Electrical Apparatus
    ASTM D 3487 : 2016 : EDT 1 Standard Specification for Mineral Insulating Oil Used in Electrical Apparatus
    CEI EN 62770 : 2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
    BS EN 62697-1:2012 Test methods for quantitative determination of corrosive sulphur compounds in unused and used insulating liquids Test method for quantitative determination of dibenzyldisulfide (DBDS)
    06/30159746 DC : 0 BS EN 50503 - FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - STANDARD FOR THE INVENTORY CONTROL, MANAGEMENT, DECONTAMINATION AND/OR DISPOSAL OF ELECTRICAL EQUIPMENT AND INSULATING LIQUIDS CONTAINING PCBS
    BS EN 62770:2014 Fluids for electrotechnical applications. Unused natural esters for transformers and similar electrical equipment
    07/30168341 DC : DRAFT AUG 2007 BS EN 62535 - INSULATING LIQUIDS - TEST METHOD FOR DETECTION OF POTENTIALLY CORROSIVE SULFUR IN USED AND UNUSED INSULATING OIL
    10/30215366 DC : 0 BS EN 60422 - MINERAL INSULATING OILS IN ELECTRICAL EQUIPMENT - SUPERVISION AND MAINTENANCE GUIDANCE
    IEEE C57.147 : 2008 ACCEPTANCE AND MAINTENANCE OF NATURAL ESTER FLUIDS IN TRANSFORMERS
    IEEE C57.13.5-2009 REDLINE IEEE Standard of Performance and Test Requirements for Instrument Transformers of a Nominal System Voltage of 115 kV and Above
    NF EN 62770 : 2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
    IEC 62770:2013 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
    IEC 62535:2008 Insulating liquids - Test method for detection of potentially corrosive sulphur in used and unused insulating oil
    UNE-EN 62697-1:2013 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
    BS EN 62535 : 2009 INSULATING LIQUIDS - TEST METHOD FOR DETECTION OF POTENTIALLY CORROSIVE SULPHUR IN USED AND UNUSED INSULATING OIL
    10/30233636 DC : 0 IEC 62697-1 ED.1 - INSULATING LIQUIDS - QUANTITATIVE DETERMINATION OF CORROSIVE SULFUR COMPOUNDS IN USED AND UNUSED INSULATING LIQUIDS - PART 1: TEST METHOD FOR QUANTITATIVE DETERMINATION OF DIBENZYL DISULFIDE (DBDS)
    BS EN 60422:2013 (published 2014-03) Mineral insulating oils in electrical equipment. Supervision and maintenance guidance
    IEEE C57.140 : 2006 EVALUATION AND RECONDITIONING OF LIQUID IMMERSED POWER TRANSFORMERS
    I.S. EN 62770:2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT
    ISO 18095:2018 Condition monitoring and diagnostics of power transformers
    ASTM D 5222 : 2016 : REDLINE Standard Specification for High Fire-Point Mineral Electrical Insulating Oils
    IEEE C57.106 : 2006 ACCEPTANCE AND MAINTENANCE OF INSULATING MINERAL OIL IN ELECTRICAL EQUIPMENT
    IEC 62697-1:2012 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 1: Test method for quantitative determination of dibenzyldisulfide (DBDS)
    UNE-EN 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
    IEC 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance
    CAN/CSA-C50-14 (R2018) Mineral insulating oil, electrical, for transformers and switches
    UNE-EN 62770:2014 Fluids for electrotechnical applications - Unused natural esters for transformers and similar electrical equipment
    IEEE 1653.1:2016 TRACTION POWER RECTIFIER TRANSFORMERS FOR SUBSTATION APPLICATIONS UP TO 1500 V DC NOMINAL OUTPUT
    IEC TR 62697-3:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 3: Test method for quantitative determination of elemental sulfur
    IEC TR 62697-2:2018 Test methods for quantitative determination of corrosive sulfur compounds in unused and used insulating liquids - Part 2: Test method for quantitative determination of total corrosive sulfur (TCS)
    IEEE C57.129-2007 GENERAL REQUIREMENTS AND TEST CODE FOR OIL-IMMERSED HVDC CONVERTER TRANSFORMERS
    EN 62770 : 2014 FLUIDS FOR ELECTROTECHNICAL APPLICATIONS - UNUSED NATURAL ESTERS FOR TRANSFORMERS AND SIMILAR ELECTRICAL EQUIPMENT (IEC 62770:2013)
    EN 60422:2013 Mineral insulating oils in electrical equipment - Supervision and maintenance guidance

    Standards Referencing This Book - (Show below) - (Hide below)

    ASTM E 11 : 2020 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
    ASTM E 11 : 2022 Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
    ANSI B74.10 : 2015 GRADING OF ABRASIVE MICROGRITS
    ASTM E 11 : 2017 : REDLINE Standard Specification for Woven Wire Test Sieve Cloth and Test Sieves
    ASTM D 923 : 2015 : REDLINE Standard Practices for Sampling Electrical Insulating Liquids
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective