ISO 18752:2014
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
28-03-2022
English, French
20-03-2014
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 18752:2014 specifies requirements for ten classes, four grades and seven types of wire- or textile-reinforced hydraulic hoses and hose assemblies of nominal sizes ranging from 5 to 102. Each class has a single maximum working pressure for all sizes. Such hoses are suitable for use with hydraulic fluids HH, HL, HM, HR and HV as defined in ISO 6743-4 at temperatures ranging from -40 C to +100 C for types AS, AC, BS and BC and -40 C to +120 C for types CS, CC and DC.
ISO 18752:2014 does not include requirements for the connection ends. It is limited to the performance of hoses and hose assemblies. The hose assembly maximum working pressure is governed by the lowest maximum working pressure of the components.
| DevelopmentNote |
Supersedes ISO/DIS 18752. (03/2014)
|
| DocumentType |
Standard
|
| Pages |
16
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| ONORM EN ISO 18752 : 2016 | Identical |
| DIN EN ISO 18752:2016-11 | Identical |
| NF EN ISO 18752 : 2016 | Identical |
| NEN EN ISO 18752 : 2016 | Identical |
| NS EN ISO 18752 : 2016 | Identical |
| I.S. EN ISO 18752:2016 | Identical |
| PN EN ISO 18752 : 2016 | Identical |
| SN EN ISO 18752 : 2016 | Identical |
| UNI EN ISO 18752 : 2016 | Identical |
| SS-EN ISO 18752:2016 | Identical |
| UNE-EN ISO 18752:2017 | Identical |
| BS EN ISO 18752:2016 | Identical |
| EN ISO 18752:2016 | Identical |
| BS ISO 18752 : 2014 | Identical |
| UNI ISO 18752 : 2015 | Identical |
| NEN ISO 18752 : 2012 | Identical |
| ISO 6605:2017 | Hydraulic fluid power — Test methods for hoses and hose assemblies |
| ISO 19859:2016 | Gas turbine applications Requirements for power generation |
| BS ISO 6605:2017 | Hydraulic fluid power. Test methods for hoses and hose assemblies |
| BS ISO 19859:2016 | Gas turbine applications. Requirements for power generation |
| 16/30312462 DC : 0 | BS ISO 6605 - HYDRAULIC FLUID POWER - TEST METHODS FOR HOSES AND HOSE ASSEMBLIES |
| 14/30244780 DC : 0 | BS ISO 19859 - GAS TURBINE APPLICATIONS - REQUIREMENTS FOR POWER GENERATION |
| ISO 3862:2017 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types for oil-based or water-based fluids Specification |
| ISO 17165-1:2007 | Hydraulic fluid power — Hose assemblies — Part 1: Dimensions and requirements |
| ISO 4397:2011 | Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes |
| ISO 7233:2016 | Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum |
| ISO 8331:2016 | Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenance |
| ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| ISO 10619-1:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 1: Bending tests at ambient temperature |
| ISO 4079:2017 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types for oil-based or water-based fluids Specification |
| ISO 10619-2:2011 | Rubber and plastics hoses and tubing Measurement of flexibility and stiffness Part 2: Bending tests at sub-ambient temperatures |
| ISO 11237:2017 | Rubber hoses and hose assemblies — Compact wire-braid-reinforced hydraulic types for oil-based or water-based fluids — Specification |
| ISO 4671:2007 | Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| ISO 6803:2017 | Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing |
| ISO 1436:2017 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types for oil-based or water-based fluids Specification |
| ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
| ISO 6743-4:2015 | Lubricants, industrial oils and related products (class L) Classification Part 4: Family H (Hydraulic systems) |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.