ISO 1928:2009
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
Solid mineral fuels Determination of gross calorific value by the bomb calorimetric method and calculation of net calorific value
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Superseded date
05-10-2020
Superseded by
Language(s)
English, French, Russian
Published date
26-05-2009
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 1928:2009 specifies a method for the determination of the gross calorific value of a solid mineral fuel at constant volume and at the reference temperature of 25 C in a bomb calorimeter calibrated by combustion of certified benzoic acid.
The result obtained is the gross calorific value of the analysis sample at constant volume with all the water of the combustion products as liquid water. In practice, fuel is burned at constant (atmospheric) pressure and the water is not condensed but is removed as vapour with the flue gases. Under these conditions, the operative heat of combustion is the net calorific value of the fuel at constant pressure. The net calorific value at constant volume can also be used; equations are given for calculating both values.
General principles and procedures for the calibrations and the fuel tests are presented in the main text, whereas those pertaining to the use of a particular type of calorimetric instrument are described in annexes. Checklists for performing calibration and fuel tests using specified types of calorimeters and examples illustrating some of the calculations are also given.
| DevelopmentNote |
Supersedes ISO/DIS 1928. (05/2009)
|
| DocumentType |
Standard
|
| Pages |
59
|
| PublisherName |
International Organization for Standardization
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| NEN ISO 1928 : 2009 | Identical |
| NF ISO 1928 : 2011 | Identical |
| BS ISO 1928:2009 | Identical |
| PN-ISO 1928:2020-05 | Identical |
| PN ISO 1928 : 2002 | Identical |
| BS 1016-5:1977 | Similar to |
| 04/101637 DC : DRAFT JAN 2004 | ISO 19353 - SAFETY OF MACHINERY - FIRE PREVENTION AND PROTECTION |
| I.S. CEN TR 14745:2003 | SOLID RECOVERED FUELS |
| 11/30240158 DC : 0 | BS ISO 18605 - PACKAGING AND THE ENVIRONMENT - ENERGY RECOVERY |
| I.S. EN 16848:2016 | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| UNE-EN 14918:2011 | Solid biofuels - Determination of calorific value |
| BS EN ISO 18125:2017 | Solid biofuels. Determination of calorific value |
| I.S. EN 13229:2001 | INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 16398 : 2013 | PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIOBASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET |
| DIN EN ISO 8130-4:2011-02 | Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:1992, including Cor. 1:1993) |
| 05/30129842 DC : DRAFT FEB 2005 | BS EN 15170 - CHARACTERIZATION OF SLUDGES - CALORIFIC VALUE (DETERMINATION OF GROSS AND NET CALORIFIC VALUES) |
| PREN 15250 : DRAFT 2012 | SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 15400:2006 | Solid recovered fuels. Methods for the determination of calorific value |
| 15/30319064 DC : 0 | BS EN ISO 18125 - SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| ISO/TS 18806:2014 | Solid mineral fuels Determination of Chlorine content |
| S.R. CEN/TS 16640:2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| PREN 16848 : DRAFT 2015 | BIO-BASED PRODUCTS - TEMPLATE FOR B2B REPORTING AND COMMUNICATION OF CHARACTERISTICS - DATA SHEET |
| ISO 15237:2016 | Solid mineral fuels — Determination of total mercury content of coal |
| UNI CEN/TS 16137 : 2011 | PLASTICS - DETERMINATION OF BIO-BASED CARBON CONTENT |
| I.S. EN 16640:2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| DIN EN 13431:2004-10 | Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
| BS EN 12952-15:2003 | Water-tube boilers and auxiliary installations Acceptance tests |
| BS EN 12809 : 2001 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| BS EN ISO 9831:2003 | Animal feeding stuffs, animal products, and faeces or urine. Determination of gross calorific value. Bomb calorimeter method |
| EN 61100:1992 | Classification of insulating liquids according to fire point and net calorific value |
| DIN ISO 8130-4:2005-04 | COATING POWDERS - PART 4: CALCULATION OF LOWER EXPLOSION LIMIT |
| CEN/TS 15400:2006 | Solid recovered fuels - Methods for the determination of calorific value |
| EN 12953-11:2003 | Shell boilers - Part 11: Acceptance tests |
| CEN/TS 16640:2014 | Bio-based products - Determination of the bio based carbon content of products using the radiocarbon method |
| CEN/TS 16023:2013 | Characterization of waste - Determination of gross calorific value and calculation of net calorific value |
| CEN/TS 16398:2012 | Plastics - Template for reporting and communication of bio-based carbon content and recovery options of biopolymers and bioplastics - Data sheet |
| ONORM EN 12809 : 2006 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| ONORM EN 14785 : 2006 | RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS |
| 04/30115520 DC : DRAFT JUN 2004 | ISO 15603 - SOLID MINERAL FUELS - DETERMINATION OF TOTAL CHLORINE BY BOMB COMBUSTION |
| BS ISO 15237 : 2016 | SOLID MINERAL FUELS - DETERMINATION OF TOTAL MERCURY CONTENT OF COAL |
| UNI EN 15170 : 2009 | CHARACTERIZATION OF SLUDGES - DETERMINATION OF CALORIFIC VALUE |
| PD ISO/TS 18806:2014 | Solid mineral fuels. Determination of Chlorine content |
| 11/30235688 DC : 0 | BS EN 13240 - ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| PD CEN/TS 16398:2012 | Plastics. Template for reporting and communication of biobased carbon content and recovery options of biopolymers and bioplastics. Data sheet |
| 16/30313049 DC : 0 | BS ISO 19984-2 - RUBBER AND RUBBER PRODUCTS - DETERMINATION OF BIOBASED CONTENT - PART 2: BIOBASED CARBON CONTENT |
| CEN/TR 14745:2003 | Solid Recovered Fuels |
| PD CEN/TR 14745:2003 | Solid recovered fuels |
| 11/30235685 DC : 0 | BS EN 13229 - INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| UNI EN 15400 : 2011 | SOLID RECOVERED FUELS - DETERMINATION OF CALORIFIC VALUE |
| 09/30205125 DC : 0 | BS EN 15400 - SOLID RECOVERED FUELS - DETERMINATION OF CALORIFIC VALUE |
| BS ISO 1170:2013 | Coal and coke. Calculation of analyses to different bases |
| BS ISO 20463:2018 | Rubber and rubber products. Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials |
| BS EN 15170:2008 | Characterization of sludges. Determination of calorific value |
| BS ISO 19984-2:2017 | Rubber and rubber products. Determination of biobased content Biobased carbon content |
| NF EN ISO 8130-4 : 2011 | COATING POWDERS - PART 4: CALCULATION OF LOWER EXPLOSION LIMIT |
| UNE-EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
| DIN EN ISO 18125:2015-12 (Draft) | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE (ISO 18125:2017) |
| S.R. CEN/TS 16137:2011 | PLASTICS - DETERMINATION OF BIO-BASED CARBON CONTENT |
| PD 6592:1996 | Packaging. Energy recovery from used packaging |
| I.S. CEN TS 15400:2006 | SOLID RECOVERED FUELS - METHODS FOR THE DETERMINATION OF CALORIFIC VALUE |
| I.S. EN 61039:2008 | CLASSIFICATION OF INSULATING LIQUIDS |
| ISO 18605:2013 | Packaging and the environment — Energy recovery |
| DIN EN 12953-11:2003-12 | SHELL BOILERS - PART 11: ACCEPTANCE TESTS |
| DIN EN 12809:2005-08 | Residential independent boilers fired by solid fuel - Nominal heat output up to 50 kW - Requirements and test methods |
| BS EN 13593:2003 | Packaging. Paper sacks for household waste collection. Types, requirements and test methods |
| ISO 9831:1998 | Animal feeding stuffs, animal products, and faeces or urine — Determination of gross calorific value — Bomb calorimeter method |
| BS EN 14156:2003 | Derivatives from coal pyrolysis. Coal tar based oils. Coal tar fuel. Specifications and test methods |
| I.S. EN 13431:2004 | PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE IN THE FORM OF ENERGY RECOVERY, INCLUDING SPECIFICATION OF MINIMUM INFERIOR CALORIFIC VALUE |
| DIN EN 13240:2002-02 | ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| DIN EN 13593:2003-04 | PACKAGING - PAPER SACKS FOR HOUSEHOLD WASTE COLLECTION - TYPES, REQUIREMENTS AND TEST METHODS |
| DIN EN 13229:2002-01 | INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| DIN EN 16640:2017-08 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| DIN EN 61100 : 1994 | CLASSIFICATION OF INSULATING LIQUIDS ACCORDING TO FIRE-POINT AND NET CALORIFIC VALUE |
| DIN EN ISO 18125:2017-08 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE (ISO 18125:2017) |
| VDE 0389-2 : 1994 | CLASSIFICATION OF INSULATING LIQUIDS ACCORDING TO FIRE POINT AND NET CALORIFIC VALUE |
| I.S. 258-1 & 2:1984 | DOMESTIC SOLED FUEL COOKERS WITH INTEGRAL BOILERS - PART 1: SAFETY REQUIREMENTS, PART 2: GENERAL REQUIREMENTS |
| 17/30337340 DC : 0 | BS ISO 20463 - RUBBER AND RUBBER PRODUCTS - DETERMINATION OF COMBUSTION ENERGY AND CARBON DIOXIDE EMISSION FROM BIOBASED AND NONBIOBASED MATERIALS |
| I.S. EN 13240:2001 | ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| BS EN 16640:2017 | Bio-based products. Bio-based carbon content. Determination of the bio-based carbon content using the radiocarbon method |
| I.S. EN ISO 8130-4:2010 | COATING POWDERS - PART 4: CALCULATION OF LOWER EXPLOSION LIMIT |
| I.S. EN 12815:2001 | RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| DIN EN 15170:2009-05 | CHARACTERIZATION OF SLUDGES - DETERMINATION OF CALORIFIC VALUE |
| 09/30210254 DC : DRAFT DEC 2009 | BS EN 16023 - CHARACTERIZATION OF WASTE - DETERMINATION OF CALORIFIC VALUE |
| BS EN 61039:2008 | Classification of insulating liquids |
| DIN 51900-1:2000-04 | Determining the gross calorific value of solid and liquid fuels using the bomb calorimeter, and calculation of net calorific value - Part 1: General information |
| PD CR 13686:2001 | Packaging. Optimzation of energy recovery from packaging waste |
| BS EN 61100:1993 | Classification of insulating liquids according to fire point and net calorific value |
| DIN ISO 8130-4 E : 2005 | COATING POWDERS - PART 4: CALCULATION OF LOWER EXPLOSION LIMIT |
| PREN 16510-1 : DRAFT 2013 | RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| BS EN 14918:2009 | Solid biofuels. Determination of calorific value |
| BS EN 15400:2011 | Solid recovered fuels. Determination of calorific value |
| DIN EN 16640:2015-09 (Draft) | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| UNE-EN ISO 8130-4:2011 | Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:1992, including Cor 1:1993) |
| EN 15400:2011 | Solid recovered fuels - Determination of calorific value |
| UNE-CEN/TS 16137:2012 EX | Plastics - Determination of bio-based carbon content |
| NF EN 61039 : 2008 | CLASSIFICATION OF INSULATING LIQUIDS |
| S.R. CEN/TS 16023:2013 | CHARACTERIZATION OF WASTE - DETERMINATION OF GROSS CALORIFIC VALUE AND CALCULATION OF NET CALORIFIC VALUE |
| BIS IS 16080 : 2013 | ANIMAL FEEDING STUFFS, ANIMAL PRODUCTS AND FAECES OR URINE - DETERMINATION OF GROSS CALORIFIC VALUE - BOMB CALORIMETER METHOD |
| PREN 12809 : DRAFT 2011 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| DD CEN/TS 14588:2004 | Solid biofuels. Terminology, definitions and descriptions |
| UNE-EN 16640:2017 | Bio-based products - Bio-based carbon content - Determination of the bio-based carbon content using the radiocarbon method |
| DIN EN 14785:2006-09 | Residential space heating appliances fired by wood pellets - Requirements and test methods |
| EN 14156:2003 | Derivatives from coal pyrolysis - Coal tar based oils: Coal tar fuel - Specifications and test methods |
| EN ISO 18125:2017 | Solid biofuels - Determination of calorific value (ISO 18125:2017) |
| UNI EN 13240 : 2006 | ROOM-HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| UNI EN 12809 : 2004 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| UNI EN 12815 : 2006 | RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| UNI EN ISO 16911-1 : 2013 | STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD |
| UNI EN 14785 : 2006 | RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS |
| 12/30260516 DC | BS EN 15250 - SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| UNI CEN/TS 16023 : 2014 | CHARACTERIZATION OF WASTE - DETERMINATION OF GROSS CALORIFIC VALUE AND CALCULATION OF NET CALORIFIC VALUE |
| DIN EN 15400:2011-05 | Solid recovered fuels - Determination of calorific value |
| BS EN ISO 8130-4:2010 | Coating powders Calculation of lower explosion limit |
| I.S. EN 12809:2001 | RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| UNI EN 14918 : 2010 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| PD CEN/TS 16023:2013 | Characterization of waste. Determination of gross calorific value and calculation of net calorific value |
| UNE-EN 16848:2017 | Bio-based products - Requirements for Business to Business communication of characteristics using a Data Sheet |
| PREN 14918 : DRAFT 2009 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| 13/30241775 DC : 0 | BS EN ISO 16559 - SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS |
| DD CEN/TS 16137:2011 | Plastics. Determination of bio-based carbon content |
| 15/30326869 DC : 0 | BS EN 16640 - BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| BS EN ISO 16911-1:2013 | Stationary source emissions. Manual and automatic determination of velocity and volume flow rate in ducts Manual reference method |
| 11/30238022 DC : DRAFT MAR 2011 | BS EN 12815 - RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| 06/30157625 DC : 0 | BS EN 61039 - GENERAL CLASSIFICATION OF INSULATING LIQUIDS |
| BS ISO 9831 : 98 AMD 14856 | ANIMAL FEEDING STUFFS, ANIMAL PRODUCTS, AND FAECES OR URINE - DETERMINATION OF GROSS CALORIFIC VALUE - BOMB CALORIMETER METHOD |
| UNI CEN/TS 16640 : 2014 | BIO-BASED PRODUCTS - DETERMINATION OF THE BIO BASED CARBON CONTENT OF PRODUCTS USING THE RADIOCARBON METHOD |
| ISO 19984-2:2017 | Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content |
| S.R. CR 13686:2001 | PACKAGING - OPTIMISATION OF ENERGY RECOVERY FROM PACKAGING WASTE |
| BS ISO 16620-2:2015 | Plastics. Biobased content Determination of biobased carbon content |
| 13/30271701 DC : 0 | BS EN 16510-1 - RESIDENTIAL SOLID FUEL BURNING APPLIANCES - PART 1: GENERAL REQUIREMENTS AND TEST METHODS |
| I.S. EN 15170:2008 | CHARACTERIZATION OF SLUDGES - DETERMINATION OF CALORIFIC VALUE |
| I.S. EN 15400:2011 | SOLID RECOVERED FUELS - DETERMINATION OF CALORIFIC VALUE |
| BS EN 15250:2007 | Slow heat release appliances fired by solid fuel. Requirements and test methods |
| BS EN 12815 : 2001 | RESIDENTIAL COOKERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| ISO 16911-1:2013 | Stationary source emissions — Manual and automatic determination of velocity and volume flow rate in ducts — Part 1: Manual reference method |
| UNE-EN ISO 16911-1:2013 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013) |
| BS EN 13240 : 2001 | ROOMHEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| DIN EN 12952-15:2004-01 | Water tube boilers and auxiliary installations - Part 15: Acceptance tests; German version EN 12952-15:2003 |
| BS EN 13431:2004 | Packaging. Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
| BS EN 14785:2006 | Residential space heating appliances fired by wood pellets. Requirements and test methods |
| IEC 61100:1992 | Classification of insulating liquids according to fire-point and net calorific value |
| DIN EN 15250:2007-06 | Slow heat release appliances fired by solid fuel - Requirements and test methods; German version EN 15250:2007 |
| EN 14785:2006 | Residential space heating appliances fired by wood pellets - Requirements and test methods |
| EN 15250:2007 | Slow heat release appliances fired by solid fuel - Requirements and test methods |
| EN 13593:2003 | Packaging - Paper sacks for household waste collection - Types, requirements and test methods |
| EN 15170:2008 | Characterization of sludges - Determination of calorific value |
| EN ISO 8130-4:2010 | Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:1992, including Cor 1:1993) |
| EN ISO 16911-1:2013 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013) |
| EN ISO 9831:2003 | Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method (ISO 9831:1998) |
| I.S. EN ISO 18125:2017 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE (ISO 18125:2017) |
| DIN EN 16640 E : 2017 | BIO-BASED PRODUCTS - BIO-BASED CARBON CONTENT - DETERMINATION OF THE BIO-BASED CARBON CONTENT USING THE RADIOCARBON METHOD |
| ISO 1716:2010 | Reaction to fire tests for products Determination of the gross heat of combustion (calorific value) |
| 03/317080 DC : DRAFT OCT 2003 | EN 14785 - RESIDENTIAL SPACE HEATING APPLIANCES FIRED BY WOOD PELLETS - REQUIREMENTS AND TEST METHODS |
| 09/30198714 DC : 0 | BS EN 14918 - SOLID BIOFUELS - METHOD FOR THE DETERMINATION OF CALORIFIC VALUE |
| 11/30238019 DC : 0 | BS EN 12809 - RESIDENTIAL INDEPENDENT BOILERS FIRED BY SOLID FUEL - NOMINAL HEAT OUTPUT UP TO 50 KW - REQUIREMENTS AND TEST METHODS |
| 03/101364 DC : DRAFT OCT 2003 | EN 13431 - PACKAGING - REQUIREMENTS FOR PACKAGING RECOVERABLE IN THE FORM OF ENERGY |
| PREN 13240 : DRAFT 2011 | ROOM HEATERS FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| I.S. EN 14918:2009 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| DIN EN ISO 18125 E : 2017 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE (ISO 18125:2017) |
| 05/30134237 DC : DRAFT MAY 2005 | BS EN 15250 - SLOW HEAT RELEASE APPLIANCES FIRED BY SOLID FUEL - REQUIREMENTS AND TEST METHODS |
| PD CEN/TS 16640:2014 | Bio-based products. Determination of the bio based carbon content of products using the radiocarbon method |
| 14/30291633 DC : 0 | BS ISO 16620-2 - PLASTICS - BIOBASED CONTENT - PART 2: DETERMINATION OF BIOBASED CARBON CONTENT |
| DIN EN ISO 16911-1:2013-06 | Stationary source emissions - Manual and automatic determination of velocity and volume flow rate in ducts - Part 1: Manual reference method (ISO 16911-1:2013); German version EN ISO 16911-1:2013 |
| BIS IS 13503 : 2013 | CLASSIFICATION OF INSULATING LIQUIDS |
| CEI EN 61039 : 2009 | CLASSIFICATION OF INSULATING LIQUIDS |
| 07/30145823 DC : 0 | BS ISO 1170 - COAL AND COKE - CALCULATION OF ANALYSES TO DIFFERENT BASES |
| S.R. CEN/TS 16398:2012 | PLASTICS - TEMPLATE FOR REPORTING AND COMMUNICATION OF BIO-BASED CARBON CONTENT AND RECOVERY OPTIONS OF BIOPOLYMERS AND BIOPLASTICS - DATA SHEET |
| 15/30317877 DC : 0 | BS EN 16848 - BIO-BASED PRODUCTS - TEMPLATE FOR B2B REPORTING AND COMMUNICATION OF CHARACTERISTICS - DATA SHEET |
| I.S. EN ISO 16911-1:2013 | STATIONARY SOURCE EMISSIONS - MANUAL AND AUTOMATIC DETERMINATION OF VELOCITY AND VOLUME FLOW RATE IN DUCTS - PART 1: MANUAL REFERENCE METHOD (ISO 16911-1:2013) |
| I.S. EN 61100:1993 | CLASSIFICATION OF INSULATING LIQUIDS ACCORDING TO FIRE POINT AND NET CALORIFIC VALUE |
| ISO 20463:2018 | Rubber and rubber products — Determination of combustion energy and carbon dioxide emission from biobased and non-biobased materials |
| ISO 16620-2:2015 | Plastics Biobased content Part 2: Determination of biobased carbon content |
| UNI EN ISO 8130-4 : 2011 | COATING POWDERS - PART 4: CALCULATION OF LOWER EXPLOSION LIMIT |
| PREN ISO 16559 : DRAFT 2013 | SOLID BIOFUELS - TERMINOLOGY, DEFINITIONS AND DESCRIPTIONS (ISO/DIS 16559:2013) |
| CEI EN 61100 : 1997 | CLASSIFICATION OF INSULATING LIQUIDS ACCORDING TO FIRE POINT AND NET CALORIFIC VALUE |
| DIN EN 16848:2015-04 (Draft) | BIO-BASED PRODUCTS - REQUIREMENTS FOR BUSINESS TO BUSINESS COMMUNICATION OF CHARACTERISTICS USING A DATA SHEET |
| ISO 1170:2013 | Coal and coke Calculation of analyses to different bases |
| BS EN 13229 : 2001 | INSET APPLIANCES INCLUDING OPEN FIRES FIRED BY SOLID FUELS - REQUIREMENTS AND TEST METHODS |
| ISO 18125:2017 | Solid biofuels — Determination of calorific value |
| BS EN 12953-11:2003 | Shell boilers Acceptance tests |
| IEC 61039:2008 | Classification of insulating liquids |
| CR 13686:2001 | Packaging - Optimization of energy recovery from packaging waste |
| EN 12952-15:2003 | Water-tube boilers and auxiliary installations - Part 15: Acceptance tests |
| EN 14918:2009 | Solid biofuels - Determination of calorific value |
| DIN EN 14156:2003-11 | DERIVATIVES FROM COAL PYROLYSIS - COAL TAR BASED OILS: COAL TAR FUEL - SPECIFICATIONS AND TEST METHODS |
| EN 61039 : 2008 | CLASSIFICATION OF INSULATING LIQUIDS |
| DIN EN ISO 9831:2004-02 | Animal feeding stuffs, animal products, and faeces or urine - Determination of gross calorific value - Bomb calorimeter method (ISO 9831:1998) |
| CEN/TS 14588:2003 | Solid biofuels - Terminology, definitions and descriptions |
| EN 13431:2004 | Packaging - Requirements for packaging recoverable in the form of energy recovery, including specification of minimum inferior calorific value |
| CEN/TS 16137:2011 | Plastics - Determination of bio-based carbon content |
| DIN EN 14918:2014-08 | SOLID BIOFUELS - DETERMINATION OF CALORIFIC VALUE |
| BS 1016-5:1977 | Methods for analysis and testing of coal and coke Gross calorific value of coal and coke |
| ISO 11722:2013 | Solid mineral fuels — Hard coal — Determination of moisture in the general analysis test sample by drying in nitrogen |
| ISO 1771:1981 | Enclosed-scale general purpose thermometers |
| ISO 1170:2013 | Coal and coke Calculation of analyses to different bases |
| ISO 579:2013 | Coke — Determination of total moisture |
| ISO 687:2010 | Solid mineral fuels — Coke — Determination of moisture in the general analysis test sample |
| ISO 5068-2:2007 | Brown coals and lignites — Determination of moisture content — Part 2: Indirect gravimetric method for moisture in the analysis sample |
| ISO 651:1975 | Solid-stem calorimeter thermometers |
| ISO 652:1975 | Enclosed-scale calorimeter thermometers |
| ISO 589:2008 | Hard coal — Determination of total moisture |
| ISO 17247:2013 | Coal Ultimate analysis |
| ISO 562:2010 | Hard coal and coke — Determination of volatile matter |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.