ISO 23551-1:2012
Current
Current
The latest, up-to-date edition.
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English
Published date
08-08-2012
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 23551-1:2012 specifies safety, constructional and performance requirements and testing of automatic and semi-automatic shut-off valves for gas burners, gas appliances and appliances of similar use.
It applies to
- normally closed valves,
- valves being mounted upstream to gas burners and gas appliances,
- valves with declared maximum working pressures up to and including 500 kPa, for use on burners or in appliances using fuel gases as natural gas, manufactured gas or liquefied petroleum gas (LPG),
- valves directly or indirectly actuated, electrically or by mechanical means,
- valves actuated by hydraulic or pneumatic means,
- valves where the flow rate is controlled by external electrical signals, either in discrete steps or proportional to the applied signal, and
- valves fitted with closed position indicator switches.
ISO 23551-1:2012 covers type testing only.
| DevelopmentNote |
To be used in conjunction with ISO 23550. (07/2006) Supersedes ISO/DIS 23551-1. (08/2012)
|
| DocumentType |
Standard
|
| Pages |
37
|
| ProductNote |
THIS STANDARD IS ALSO REFERES TO :JIS B 0202,JIS B 0203,JIS B 2220,JIS B 2239, JIS B 2240, JIS B 2241, JIS B 2301, JIS B 2302,JIS B 2311,JIS B 2312, JIS B 2316,JIS H 3401, NEMA 250,ANSI/ASME B 1.1:ANSI/ASM]ANSI/ASME B16.5, E B 1.20.1, ANSI/SAE J 512,ANSI/ASME B16.1,ANSI/SAE J 514,
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NEN ISO 23551-1 : 2012 | Identical |
| UNE-EN 62282-3-300:2013 | Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation |
| BS ISO 13577-3:2016 | Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases |
| BS ISO 13574:2015 | Industrial furnaces and associated processing equipment. Vocabulary |
| BS EN 62282-3-100:2012 | Fuel cell technologies Stationary fuel cell power systems. Safety |
| ISO 23551-8:2016 | Safety and control devices for gas burners and gas-burning appliances — Particular requirements — Part 8: Multifunctional controls |
| DIN EN ISO 23553-1:2014-09 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014 |
| EN 62282-3-300:2012 | Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation |
| OVE/ONORM EN 62282-4-101 : 2015 | FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS (APU) - SAFETY OF ELECTRICALLY POWERED INDUSTRIAL TRUCKS (IEC 62282-4-101:2014) |
| 12/30249472 DC : 0 | BS ISO 13574 - INDUSTRIAL FURNACES AND ASSOCIATED THERMAL PROCESSING EQUIPMENT - VOCABULARY |
| 09/30202307 DC : 0 | BS EN 12514-1 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 1: SAFETY REQUIREMENTS AND TESTS - TERMINOLOGY, GENERAL REQUIREMENTS |
| 15/30313338 DC : 0 | BS ISO 23551-8 - SAFETY AND CONTROL DEVICES FOR GAS BURNERS AND GAS-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 8: MULTIFUNCTIONAL CONTROLS |
| BS EN 62282-3-300:2012 | Fuel cell technologies Stationary fuel cell power systems. Installation |
| BS ISO 23551-8:2016+A1:2019 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls |
| BS ISO 23551-8:2016 | Safety and control devices for gas burners and gas-burning appliances. Particular requirements Multifunctional controls |
| EN 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| 13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
| DIN EN 13611:2019-06 | Safety and control devices for burners and appliances burning gaseous and/or liquid fuels - General requirements |
| CEI EN 62282-3-300 : 2013 | FUEL CELL TECHNOLOGIES - PART 3-300: STATIONARY FUEL CELL POWER SYSTEMS - INSTALLATION |
| 16/30354071 DC : 0 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| CEI EN 62282-3-100 : 2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| 14/30283312 DC : 0 | BS ISO 13577-3 - INDUSTRIAL FURNACE AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 3: GENERATION AND USE OF PROTECTIVE AND REACTIVE ATMOSPHERE GASES |
| UNE-EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| OVE/ONORM EN 62282-3-100 : 2013 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012) |
| UNI EN ISO 23553-1 : 2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES |
| BS ISO 22967:2010 | Forced draught gas burners |
| ANSI/CSA FC 1:2014 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| I.S. EN ISO 23553-1:2014 | SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014) |
| I.S. EN 62282-3-100:2012 | FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY (IEC 62282-3-100:2012 (EQV)) |
| DIN EN 13611:2016-09 | SAFETY AND CONTROL DEVICES FOR BURNERS AND APPLIANCES BURNING GASEOUS AND/OR LIQUID FUELS - GENERAL REQUIREMENTS |
| ISO 23551-4:2005 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves |
| ISO 13577-4:2014 | Industrial furnace and associated processing equipment — Safety — Part 4: Protective systems |
| ISO 13574:2015 | Industrial furnaces and associated processing equipment — Vocabulary |
| 13/30276640 DC : 0 | BS EN 62282-4-101 ED 1.0 - FUEL CELL TECHNOLOGIES - PART 4-101: FUEL CELL POWER SYSTEMS FOR PROPULSION FOR OTHER THAN ROAD VEHICLES AND AUXILIARY POWER UNITS - FUEL CELL POWER SYSTEMS FOR ELECTRICALLY POWERED INDUSTRIAL TRUCKS - SAFETY |
| BS EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves |
| BS EN 62282-4-101:2014 | Fuel cell technologies Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU). Safety of electrically powered industrial trucks |
| ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| 12/30250105 DC : 0 | BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012) |
| IEC 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| IEC 62282-3-300:2012 | Fuel cell technologies - Part 3-300: Stationary fuel cell power systems - Installation |
| IEC 62282-3-100:2012 | Fuel cell technologies - Part 3-100: Stationary fuel cell power systems - Safety |
| BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
| EN ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014) |
| ISO 22967:2010 | Forced draught gas burners |
| 10/30238615 DC : DRAFT NOV 2010 | BS EN 62282-3-100 - FUEL CELL TECHNOLOGIES - PART 3-100: STATIONARY FUEL CELL POWER SYSTEMS - SAFETY |
| BS ISO 13577-4:2014 | Industrial furnace and associated processing equipment. Safety Protective systems |
| ISO 13577-3:2016 | Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases |
| I.S. EN 62282-3-300:2012 | FUEL CELL TECHNOLOGIES - PART 3-300: STATIONARY FUEL CELL POWER SYSTEMS - INSTALLATION (IEC 62282-3-300:2012 (EQV)) |
| ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
| EN 62282-4-101:2014 | Fuel cell technologies - Part 4-101: Fuel cell power systems for propulsion other than road vehicles and auxiliary power units (APU) - Safety of electrically powered industrial trucks |
| ISO 4400:1994 | Fluid power systems and components — Three-pin electrical plug connectors with earth contact — Characteristics and requirements |
| IEC 60335-2-102:2004+AMD1:2008+AMD2:2012 CSV | Household and similar electrical appliances - Safety - Part 2-102:Particular requirements for gas, oil and solid-fuel burning appliances having electrical connections |
| ISO 8655-1:2002 | Piston-operated volumetric apparatus Part 1: Terminology, general requirements and user recommendations |
| UL 50:13ED 2015-10-16 | Enclosures for Electrical Equipment, Non-Environmental Considerations |
| IEC 61000-4-11:2004+AMD1:2017 CSV | Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests |
| NEMA 250 : 2014 | ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM) |
| IEC 61000-4-8:2009 | Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immunity test |
| IEC 61000-4-4:2012 RLV | Electromagnetic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 23553-1:2014 | Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves |
| IEC 61000-4-6:2013 | Electromagnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| ASME B16.1 : 2015 | Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250 |
| IEC 60079-11:2011 | Explosive atmospheres - Part 11: Equipment protection by intrinsic safety "i" |
| ASME B1.20.1 : 2013(R2018) | PIPE THREADS, GENERAL PURPOSE (INCH) |
| AS 62282.3.300:2021 | Fuel cell technologies Stationary fuel cell power systems - Installation (IEC 62282-3-300:2012 (ED.1.0), MOD) |
| ISO 7-1:1994 | Pipe threads where pressure-tight joints are made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 23552-1:2007 | Safety and control devices for gas and/or oil burners and gas and/or oil appliances — Particular requirements — Part 1: Fuel/air ratio controls, electronic type |
| IEC 60529:1989+AMD1:1999+AMD2:2013 CSV | Degrees of protection provided by enclosures (IP Code) |
| IEC 61058-1:2016 | Switches for appliances - Part 1: General requirements |
| SAE J 514 : 2012 | HYDRAULIC TUBE FITTINGS |
| IEC 61000-4-2:2008 | Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement techniques - Electrostatic discharge immunity test |
| IEC 61000-4-3:2006+AMD1:2007+AMD2:2010 CSV | Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test |
| ISO 65:1981 | Carbon steel tubes suitable for screwing in accordance with ISO 7-1 |
| ASME B16.5 : 2017 | PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
| ISO 301:2006 | Zinc alloy ingots intended for castings |
| ISO 6952:1994 | Fluid power systems and components Two-pin electrical plug connectors with earth contact Characteristics and requirements |
| SAE J512 : 1997 | AUTOMOTIVE TUBE FITTINGS |
| ISO 228-1:2000 | Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation |
| ISO 23550:2011 | Safety and control devices for gas burners and gas-burning appliances General requirements |
| ISO 1817:2015 | Rubber, vulcanized or thermoplastic Determination of the effect of liquids |
| IEC 60730-1:2013+AMD1:2015 CSV | Automatic electrical controls - Part 1: General requirements |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.