ISO 2781:2008
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Rubber, vulcanized or thermoplastic Determination of density
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
01-10-2018
Superseded by
Published date
22-04-2008
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 2781:2008 specifies two methods of test for the determination of the density of solid vulcanized and thermoplastic rubbers.
Such determinations are of importance in the control of the quality of a rubber compound and in the calculation of the mass of rubber required to produce a given volume of material.
The standard does not cover the determination of the relative density of rubber, which is the ratio of the mass of a given volume of rubber to the mass of an equal volume of pure water at a given temperature.
| DevelopmentNote |
DRAFT ISO/DIS 2781 is also available for this standard. (01/2017)
|
| DocumentType |
Standard
|
| Pages |
6
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| UNE-ISO 2781:2015 | Identical |
| UNI ISO 2781 : 2011 | Identical |
| NEN ISO 2781 : 2008 AMD 1 2010 | Identical |
| BS ISO 2781 : 2008 | Identical |
| NF ISO 2781 : 2008 AMD 1 2010 | Identical |
| BIS IS 3400-9 : 2014 | Identical |
| BS 903-A1:1980 | Identical |
| UNE 53526:2001 | Identical |
| UNE 59535:2007 | Identical |
| DIN 53479:1976-07 | Corresponds |
| NBN E 48 113 : 1988 | Identical |
| NBN ISO 2781 : 1990 | Identical |
| PN ISO 2781 : 1996 | Identical |
| 07/30164024 DC : 0 | BS ISO 23233 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF RESISTANCE TO ABRASION USING A DRIVEN, VERTICAL ABRASIVE DISC |
| BS EN 50655-3:2017 | Electric cables. Accessories. Material characterization Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV |
| DIN ISO 4649:2014-03 | Rubber, vulcanized or thermoplastic - Determination of abrasion resistance using a rotating cylindrical drum device (ISO 4649:2010) |
| 00/560909 DC : DRAFT MAR 2000 | BS ISO 8871-2 - ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION |
| EN ISO 18797-1:2017 | Petroleum, petrochemical and natural gas industries - External corrosion protection of risers by coatings and linings - Part 1: Elastomeric coating systems-polychloroprene or EPDM (ISO 18797-1:2016) |
| 05/30134209 DC : DRAFT MAY 2005 | HD 631.4 S1 ED. 1 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 4: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36(42) KV |
| VDE 0212-2 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| DIN ISO 13226:2015-12 | Rubber - Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers (ISO 13226:2011) |
| 13/30290552 DC : 0 | BS EN 4691-1 AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| BS F 159:2006 | Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from oil resistant silicone rubber material conforming to BS F 153. Specification |
| 13/30276381 DC : 0 | BS ISO 3601-5 - FLUID POWER SYSTEMS - O-RINGS - PART 5: SPECIFICATION OF ELASTOMERIC MATERIALS FOR INDUSTRIAL APPLICATIONS |
| BS F 152:2006 | Properties of silicone rubber sheet, mouldings and extrusions (general purpose). Specification |
| BS 7825-3.6:1997 | Calibration of rubber and plastics test equipment. Calibration schedules Dimensional properties |
| 15/30278562 DC : 0 | BS ISO 18797-1 - PETROLEUM, PETROCHEMICALS AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS - POLYCHLOROPRENE OR EPDM |
| API TR 1PER15K-1 : 2013 | PROTOCOL FOR VERIFICATION AND VALIDATION OF HIGH-PRESSURE HIGH-TEMPERATURE EQUIPMENT |
| EN 50655-3:2017 | Electric cables - Accessories - Material characterization - Part 3: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV |
| 03/312144 DC : DRAFT JULY 2003 | ISO 13628-10 - PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10 - BONDED FLEXIBLE PIPE |
| BS F 156:2006 | Properties of fluid resistant ethylene-propylene rubber sheet, mouldings and extrusions. Specification |
| UNI EN ISO 23936-2 : 2012 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NONMETALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| I.S. EN 15502-2-1:2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| PREN 3747 : 200P1 | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| ISO 6072:2011 | Rubber Compatibility between hydraulic fluids and standard elastomeric materials |
| I.S. EN ISO 18797-1:2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMS-POLYCHLOROPRENE OR EPDM (ISO 18797-1:2016) |
| I.S. EN 4595:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| HD 631.4 S1:2008 | Electrical cables - Accessories - Material characterisation - Part 4: Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV |
| NF ISO 13226 : 2011 | RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
| ISO 21809-3:2016 | Petroleum and natural gas industries — External coatings for buried or submerged pipelines used in pipeline transportation systems — Part 3: Field joint coatings |
| DIN EN 14241-1:2013-11 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| DIN EN 26:2015-08 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| BS EN 3747:2007 | Aerospace series. O-rings, in fluorosilicone rubber (FVMQ). Technical specification |
| BS EN 13913:2003 | Railway applications. Rubber suspension components. Elastomer-based mechanical parts |
| BS EN 14241-1:2013 | Chimneys. Elastomeric seals and elastomeric sealants. Material requirements and test methods Seals in flue liners |
| BS EN 12770:2000 | Footwear. Test methods for outsoles. Abrasion resistance |
| BS EN 13597:2003 | Railway applications. Rubber suspension components. Rubber diaphragms for pneumatic suspension springs |
| UNI EN ISO 8871-2 : 2014 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION |
| I.S. EN 89:2015 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 15502-2-1:2017-09 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW (includes Amendment 1:2016) |
| NBR 15880 : 2010 | DUCTILE IRON FITTINGS AND ACCESSORIES FOR PIPES OF PVC 6,3 AND POLIETILENE PE - REQUIREMENTS |
| NBR 15803 : 2010 ERRATA 2010 | PRESSURIZED BURIED SYSTEMS FOR WATER DISTRIBUTION AND SEWER - REQUIREMENTS FOR MECHANICAL JOINT COMPRESSION FITTINGS, BRANCH SADDLES AND TAPPING TEE FOR POLYETHYLENE (PE) PIPES FOR NOMINAL OUTSIDE DIAMETERS BETWEEN 20 MM AND 160 MM, WITH MAXIMUM OPERATION PRESSURE UP TO 1.6 MPA |
| DEFSTAN 93-55/3(2009) : 2009 | BUTYL RUBBER, TYPE NBC |
| NBR 15750 : 2009 | PVC-O (ORIENTED UNPLASTICISED POLYVINYL CHLORIDE) PIPING SYSTEMS FOR THE CONVEYANCE OF WATER OR SEWAGE UNDER PRESSURE - REQUIREMENTS AND TEST METHODS |
| BS EN 61854:1998 | Overhead lines. Requirements and tests for spacers |
| BS F 164:2006 | Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from fluorosilicone rubber material released to BS F 154. Specification |
| BS ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Performance test procedures |
| I.S. EN 483:2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| 16/30334942 DC : 0 | BS ISO 23337 - RUBBER, VULCANIZED OR THERMOPLASTIC - DETERMINATION OF ABRASION RESISTANCE USING THE IMPROVED LAMBOURN TEST MACHINE |
| BS ISO 24453:2008 | Rubber. Acquisition and presentation of comparable single-point data |
| PREN 50655-3 : DRAFT 2015 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 3: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV |
| BS ISO 18797-1 : 2016 COR 2017 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - EXTERNAL CORROSION PROTECTION OF RISERS BY COATINGS AND LININGS - PART 1: ELASTOMERIC COATING SYSTEMSPOLYCHLOROPRENE OR EPDM |
| XP PREN 3747 : 1995 XP | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| 14/30301115 DC : 0 | BS EN 3207 - AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
| 11/30250546 DC : 0 | BS EN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| PREN 549 : DRAFT 2017 | RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
| PREN 14241-1 : DRAFT 2011 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| BS ISO 19984-2:2017 | Rubber and rubber products. Determination of biobased content Biobased carbon content |
| BS EN 50465:2015 | European product standard for combined heating power systems using gas fuel |
| BS ISO 13628-10 : 2005 AMD 16775 | PETROLEUM AND NATURAL GAS INDUSTRIES - DESIGN AND OPERATION OF SUBSEA PRODUCTION SYSTEMS - PART 10: SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| NF EN 61854 : 2001 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| PREN 4594 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| UNE-ISO 13226:2017 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers. |
| BS ISO 13226:2011 | Rubber. Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| PREN 4691-1 : DRAFT 2015 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| CEI EN 61854 : 2000 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| I.S. EN ISO 23936-2:2011 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS (ISO 23936-2:2011) |
| CEI 20-94 : 2010 | ELECTRICAL CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 4: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV |
| EN 50465 : 2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| ASTM D 5963 : 2004 : R2010 : EDT 1 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
| I.S. EN 50465:2015 | GAS APPLIANCES - COMBINED HEAT AND POWER APPLIANCE OF NOMINAL HEAT INPUT INFERIOR OR EQUAL TO 70 KW |
| DIN EN 89:2015-08 | GAS-FIRED STORAGE WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| DIN EN 3050:1998-07 | AEROSPACE SERIES - O-RINGS, IN FLUOROCARBON RUBBER (FKM), LOW COMPRESSION SET - TECHNICAL SPECIFICATION |
| BS EN ISO 8871-1:2004 | Elastomeric parts for parenterals and for devices for pharmaceutical use Extractables in aqueous autoclavates |
| BS EN 377:1993 | Lubricants for applications in appliances and associated controls using combustible gases except those designed for use in industrial processes |
| BS EN 26:1998 | Gas fired instantaneous water heaters for the production of domestic hot water, fitted with atmospheric burners |
| EN 61854:1998 | Overhead lines - Requirements and tests for spacers |
| I.S. EN 26:2015 | GAS-FIRED INSTANTANEOUS WATER HEATERS FOR THE PRODUCTION OF DOMESTIC HOT WATER |
| I.S. EN 14241-1:2013 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| DIN EN 13597:2008-04 | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| I.S. EN 3747:2007 | AEROSPACE SERIES - O-RINGS, IN FLUOROSILICONE RUBBER (FVMQ) - TECHNICAL SPECIFICATION |
| VDI 3388:2012-03 | Materials for trimming and forming dies |
| BS 4832:1987 | Specification for compatibility between elastomeric materials and hydraulic fluids |
| DIN EN 15502-2-1:2013-01 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| BS ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements Performance test procedures |
| ISO 16589-4:2011 | Rotary shaft lip-type seals incorporating thermoplastic sealing elements — Part 4: Performance test procedures |
| 13/30290592 DC : 0 | BS EN 6111 - AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD |
| BS EN 4595:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Subsonic erosion resistance |
| 07/30083514 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED AND SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| BS F 157:2006 | Properties of high tear strength silicone rubber sheet, mouldings and extrusions. Specification |
| BS F 162:2006 | Properties of elastomeric toroidal sealing rings (\'O\' rings) manufactured from ethylene-propylene rubber material conforming to BS F 156. Specification |
| 11/30187339 DC : 0 | BS EN ISO 12736 - PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES |
| ISO 1920-4:2005 | Testing of concrete Part 4: Strength of hardened concrete |
| ASTM D 8115 : 2017 | Standard Test Method for Rubber Property—Abrasion Resistance (Multi-Directional Platform Abrader) |
| BS ISO 4649:2017 | Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using a rotating cylindrical drum device |
| PD CEN/TR 15990:2010 | Data sheets. Footwear tests materials and test adhesives |
| BS ISO 6072:2011 | Rubber. Compatibility between hydraulic fluids and standard elastomeric materials |
| 17/30355087 DC : 0 | BS ISO 13226 - RUBBER - STANDARD REFERENCE ELASTOMERS (SRES) FOR CHARACTERIZING THE EFFECT OF LIQUIDS ON VULCANIZED RUBBERS |
| PREN 3624 : 200P1 | AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
| NF ISO 6072 : 2012 | RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
| ISO 13226:2011 | Rubber Standard reference elastomers (SREs) for characterizing the effect of liquids on vulcanized rubbers |
| API SPEC 17K : 2017 | SPECIFICATION FOR BONDED FLEXIBLE PIPE |
| UNI EN 4594 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| I.S. EN 61854:1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| BS EN 15502-2-1 : 2012 | GAS-FIRED CENTRAL HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B2, B3 AND B5 APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| I.S. HD 631.4:2008 | ELECTRICAL CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 4: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV |
| ISO 24453:2008 | Rubber Acquisition and presentation of comparable single-point data |
| ISO 18797-1:2016 | Petroleum, petrochemical and natural gas industries — External corrosion protection of risers by coatings and linings — Part 1: Elastomeric coating systems-polychloroprene or EPDM |
| ASTM D 5963 : 2004 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
| ISO 6194-4:2009 | Rotary shaft lip-type seals incorporating elastomeric sealing elements Part 4: Performance test procedures |
| DIN EN ISO 8871-2:2014-08 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003 + AMD.1:2005) |
| BS EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
| I.S. EN ISO 8871-2:2004 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION (ISO 8871-2:2003) |
| ONORM ISO 4649 : 2015 | RUBBER, VULCANIZED OR THERMOPLATIC - DETERMINATION OF ABRASION RESISTANCE USING A ROTATING CYLINDRICAL DRUM DEVICE (ISO 4649:2010) |
| EN 50465:2015 | Gas appliances - Combined heat and power appliance of nominal heat input inferior or equal to 70 kW |
| UNI EN 14241-1 : 2013 | CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| EN ISO 13628-10:2006 | Petroleum and natural gas industries - Design and operation of subsea production systems - Part 10: Specification for bonded flexible pipe (ISO 13628-10:2006) |
| BS EN ISO 12736:2014 | Petroleum and natural gas industries. Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| 10/30218935 DC : 0 | BS EN 15502-2-1 - GAS-FIRED HEATING BOILERS - PART 2-1: SPECIFIC STANDARD FOR TYPE C APPLIANCES AND TYPE B[2], B[3] AND B[5] APPLIANCES OF A NOMINAL HEAT INPUT NOT EXCEEDING 1000 KW |
| BS F 153:2006 | Properties of oil resistant silicone rubber sheet, mouldings and extrusions. Specification |
| BS EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries. Nonmetallic materials in contact with media related to oil and gas production Elastomers |
| BS EN 4594:2013 | Aerospace series. Paints and varnishes. Two component cold curing polyurethane finish. Supersonic erosion resistance |
| BS EN ISO 21809-3:2016 | Petroleum and natural gas industries. External coatings for buried or submerged pipelines used in pipeline transportation systems Field joint coatings |
| DIN EN 61854 : 1999 | OVERHEAD LINES - REQUIREMENTS AND TESTS FOR SPACERS |
| BS ISO 6356:2012 | Textile and laminate floor coverings. Assessment of static electrical propensity. Walking test |
| BS F 154:2006 | Properties of fluorosilicone rubber sheet, mouldings and extrusions. Specification |
| 10/30196881 DC : 0 | BS ISO 6072 - RUBBER - COMPATIBILITY BETWEEN HYDRAULIC FLUIDS AND STANDARD ELASTOMERIC MATERIALS |
| BS ISO 23337:2016 | Rubber, vulcanized or thermoplastic. Determination of abrasion resistance using the Improved Lambourn test machine |
| 07/30161672 DC : 0 | BS ISO 24453 - RUBBER - ACQUISITION AND PRESENTATION OF COMPARABLE SINGLE-POINT DATA |
| BS 7933-4:2008 | Electric cables. Accessories. Material characterisation Fingerprinting for cold shrinkable components for low and medium voltage applications up to 20,8/36 (42) kV |
| ASTM D 5963 : 2004 : R2010 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
| 01/106321 DC : DRAFT AUG 2001 | PREN 14241-1 - CHIMNEYS - ELASTOMERIC SEALS AND ELASTOMERIC SEALANTS - MATERIAL REQUIREMENTS AND TEST METHODS - PART 1: SEALS IN FLUE LINERS |
| PREN 6111 : 200P1 | AEROSPACE SERIES - ETHYLENE-PROPYLENE ELASTOMER (EPM/EPDM) - HARDNESS 80 IRHD FOR STATIC SEAL ELEMENTS IN HYDRAULIC SYSTEMS FOR LONG-TERM APPLICATION - MATERIAL STANDARD |
| BS 7677:1993 | Recommendations for classification of imperfections in pipe joint rings |
| ISO 19984-2:2017 | Rubber and rubber products — Determination of biobased content — Part 2: Biobased carbon content |
| PREN 3207 : 1996 | AEROSPACE SERIES - RUBBER COMPOUNDS - TECHNICAL SPECIFICATION |
| 17/30328799 DC : 0 | BS EN 549 - RUBBER MATERIALS FOR SEALS AND DIAPHRAGMS FOR GAS APPLIANCES AND GAS EQUIPMENT |
| I.S. EN ISO 12736:2014 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| ISO 6356:2012 | Textile and laminate floor coverings — Assessment of static electrical propensity — Walking test |
| ISO 9691:1992 | Rubber — Recommendations for the workmanship of pipe joint rings — Description and classification of imperfections |
| ASTM D 5963 : 2004 : R2015 | Standard Test Method for Rubber Property—Abrasion Resistance (Rotary Drum Abrader) |
| ISO 20871:2018 | Footwear — Test methods for outsoles — Abrasion resistance |
| ISO 4649:2017 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
| S.R. CEN TR 15990:2010 | DATA SHEETS - FOOTWEAR TESTS MATERIALS AND TEST ADHESIVES |
| IEC 61854:1998 | Overhead lines - Requirements and tests for spacers |
| DIN EN 13831:2007-12 | Closed expansion vessels with built in diaphragm for installation in water |
| BS EN 3050:1998 | O-rings, in fluorocarbon rubber (FKM), low compression set. Technical specification |
| BS EN ISO 13628-10:2006 | Petroleum and natural gas industries. Design and operation of subseaprod uction systems Specification for bonded flexible pipe |
| EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| BS EN 483 : 2000 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| ISO 8871-2:2003 | Elastomeric parts for parenterals and for devices for pharmaceutical use Part 2: Identification and characterization |
| UNE-ISO 4649:2013 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using a rotating cylindrical drum device |
| ISO 8871-1:2003 | Elastomeric parts for parenterals and for devices for pharmaceutical use — Part 1: Extractables in aqueous autoclavates |
| BS EN 13831:2007 | Closed expansion vessels with built-in diaphragm for installation in water |
| ISO 12736:2014 | Petroleum and natural gas industries Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures |
| UNE-EN 89:2016 | Gas-fired storage water heaters for the production of domestic hot water |
| UNE-EN 26:2016 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| BS EN 3207:1998 | Rubber compounds. Technical specification |
| BS EN 4691-1:2017 | Aerospace series. Tie rod with integrated bolts Technical specification |
| EN 89:2015 | Gas-fired storage water heaters for the production of domestic hot water |
| EN 14241-1:2013 | Chimneys - Elastomeric seals and elastomeric sealants - Material requirements and test methods - Part 1: Seals in flue liners |
| EN ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries - Non-metallic materials in contact with media related to oil and gas production - Part 2: Elastomers (ISO 23936-2:2011) |
| EN 4594:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Supersonic erosion resistance |
| EN 15502-2-1:2012+A1:2016 | Gas-fired central heating boilers - Part 2-1: Specific standard for type C appliances and type B2, B3 and B5 appliances of a nominal heat input not exceeding 1 000 kW |
| EN 26:2015 | Gas-fired instantaneous water heaters for the production of domestic hot water |
| EN 13913:2003 | Railway applications - Rubber suspension components - Elastomer-based mechanical parts |
| EN 13597:2003 | Railway applications - Rubber suspension components - Rubber diaphragms for pneumatic suspension springs |
| EN 3207:1998 | Aerospace series - Rubber compounds - Technical specification |
| EN 4595:2013 | Aerospace series - Paints and varnishes - Two component cold curing polyurethane finish - Subsonic erosion resistance |
| EN ISO 12736:2014 | Petroleum and natural gas industries - Wet thermal insulation coatings for pipelines, flow lines, equipment and subsea structures (ISO 12736:2014) |
| EN 3747:2007 | Aerospace series - O-rings, in fluorosilicone rubber (FVMQ) - Technical specification |
| EN 13831:2007 | Closed expansion vessels with built in diaphragm for installation in water |
| EN ISO 8871-1:2004 | Elastomeric parts for parenterals and for devices for pharmaceutical use - Part 1: Extractables in aqueous autoclavates (ISO 8871-1:2003) |
| EN 3050:1998 | Aerospace series - O-rings, in fluorocarbon rubber (FKM), low compression set - Technical specification |
| BS 903-3:2003 | Physical testing of rubber Acquisition and presentation of comparable single-point data |
| 15/30325656 DC : 0 | BS EN 50655-3 - ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 3: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV |
| I.S. EN 50655-3:2017 | ELECTRIC CABLES - ACCESSORIES - MATERIAL CHARACTERIZATION - PART 3: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36 (42) KV |
| 14/30300605 DC : 0 | BS EN ISO 21809-3 - PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS |
| I.S. EN 4594:2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUPERSONIC EROSION RESISTANCE |
| I.S. EN ISO 21809-3:2016 | PETROLEUM AND NATURAL GAS INDUSTRIES - EXTERNAL COATINGS FOR BURIED OR SUBMERGED PIPELINES USED IN PIPELINE TRANSPORTATION SYSTEMS - PART 3: FIELD JOINT COATINGS (ISO 21809-3:2016) |
| 10/30219184 DC : 0 | BS ISO 23936-2 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - NON-METALLIC MATERIALS IN CONTACT WITH MEDIA RELATED TO OIL AND GAS PRODUCTION - PART 2: ELASTOMERS |
| 05/30130019 DC : DRAFT JULY 2005 | BS F 154 - PROPERTIES OF FLUOROSILICONE RUBBER SHEET, MOULDINGS AND EXTRUSIONS - SPECIFICATION |
| BS 7825-3.4:1998 | Calibration of rubber and plastics test equipment. Calibration schedules Mechanical properties of rubber |
| 91/83289 DC : DRAFT DEC 1991 | PREN 3624 - AEROSPACE SERIES - POLYSULPHIDE SEALANTS, TWO-COMPONENT - TECHNICAL SPECIFICATION |
| UNI EN 4595 : 2013 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| 14/30314166 DC : 0 | BS EN 6109 - AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
| 07/30131694 DC : 0 | BS ISO 6194-4 - ROTARY-SHAFT LIP-TYPE SEALS INCORPORATING ELASTOMERIC SEALING ELEMENTS - PART 4: PERFORMANCE TEST PROCEDURES |
| NFC 33 009-4 : 2008 | ELECTRICAL CABLES - ACCESSORIES - MATERIAL CHARACTERISATION - PART 4: FINGERPRINTING FOR COLD SHRINKABLE COMPONENTS FOR LOW AND MEDIUM VOLTAGE APPLICATIONS UP TO 20,8/36(42) KV |
| PREN 4595 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - TWO COMPONENT COLD CURING POLYURETHANE FINISH - SUBSONIC EROSION RESISTANCE |
| EN 4691-1:2017 | Aerospace series - Tie rod with integrated bolts - Part 1: Technical specification |
| PREN 6109 : 200P2 | AEROSPACE SERIES - STATIC SEAL ELEMENTS ELASTOMER, MOULDED, PHOSPHATE ESTER RESISTANT - TECHNICAL SPECIFICATION |
| I.S. EN 4691-1:2017 | AEROSPACE SERIES - TIE ROD WITH INTEGRATED BOLTS - PART 1: TECHNICAL SPECIFICATION |
| UNE-EN ISO 21809-3:2016 | Petroleum and natural gas industries - External coatings for buried or submerged pipelines used in pipeline transportation systems - Part 3: Field joint coatings (ISO 21809-3:2016) |
| API TR 17TR8 : 2018 | HIGH-PRESSURE HIGH-TEMPERATURE DESIGN GUIDELINES |
| ISO 23337:2016 | Rubber, vulcanized or thermoplastic — Determination of abrasion resistance using the Improved Lambourn test machine |
| BS EN ISO 8871:1997 | Elastomeric parts for aqueous parenteral preparations |
| ISO 13628-10:2005 | Petroleum and natural gas industries — Design and operation of subsea production systems — Part 10: Specification for bonded flexible pipe |
| ISO 23936-2:2011 | Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers |
| BS EN ISO 8871-2 : 2004 | ELASTOMERIC PARTS FOR PARENTERALS AND FOR DEVICES FOR PHARMACEUTICAL USE - PART 2: IDENTIFICATION AND CHARACTERIZATION |
| EN 12770:1999 | Footwear - Test methods for outsoles - Abrasion resistance |
| DIN EN 483:2000-06 | GAS-FIRED CENTRAL HEATING BOILERS - TYPE C BOILERS OF NOMINAL HEAT INPUT NOT EXCEEDING 70 KW |
| DIN EN 13913:2003-08 | RAILWAY APPLICATIONS - RUBBER SUSPENSION COMPONENTS - ELASTOMER-BASED MECHANICAL PARTS |
| ONORM EN ISO 12736 : 2015 | PETROLEUM AND NATURAL GAS INDUSTRIES - WET THERMAL INSULATION COATINGS FOR PIPELINES, FLOW LINES, EQUIPMENT AND SUBSEA STRUCTURES (ISO 12736:2014) |
| NBR 9952 : 2014 | ASPHALTIC MEMBRANE FOR WATERPROOFING |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.