![header thumbnail](/images/publishers\iso_cover.gif)
ISO 2854:1976
Current
The latest, up-to-date edition.
![header thumbnail](/images/publishers\iso_cover.gif)
Statistical interpretation of data — Techniques of estimation and tests relating to means and variances
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
English, French
01-02-1976
Comparison of a variance with a given value, estimation of a variance, comparison of two variances, estimation of the ratio of two variances, and the same procedures for a mean with known or unknown variance are dealt with. Techniques are valid for sample elements drawn at random and being independent, when the distribution of the observed variable is normal, for a sample size not too small (5 to 10 at least) approximately also when the distribution does not deviate very much from the normal. Techniques of verification of the hypothesis of normality are briefly dealt with in the examples.
DevelopmentNote |
Also numbered as BS 2846-4(1976) (06/2005)
|
DocumentType |
Standard
|
Pages |
46
|
PublisherName |
International Organization for Standardization
|
Status |
Current
|
Standards | Relationship |
NBN X 03 002 : 1985 | Identical |
PN ISO 2854 : 1994 | Identical |
UNI ISO 2854 : 1988 | Identical |
UNE 66050:1978 | Identical |
UNE 66047:1978 | Identical |
UNE 66052:1978 | Identical |
UNE 66045:1978 | Identical |
NFX 06 072 : 1978 | Similar to |
NFX 06 055 : 1987 | Similar to |
UNE 66046:1978 | Identical |
NFX 06 054 : 1987 | Similar to |
UNE 66049:1978 | Identical |
UNE 66059:1978 IN | Identical |
NFX 06 063 : 1987 | Similar to |
NFX 06 051 : 1987 | Similar to |
NFX 06 053 : 1987 | Similar to |
NFX 06 062 : 1987 | Similar to |
NFX 06 056 : 1987 | Similar to |
NFX 06 061 : 1987 | Similar to |
UNE 66053:1978 | Identical |
UNE 66056:1978 | Identical |
UNE 66051:1978 | Identical |
NFX 06 058 : 1987 | Similar to |
NFX 06 057 : 1987 | Similar to |
UNE 66054:1978 | Identical |
UNE 66048:1978 | Identical |
NFX 06 060 : 1987 | Similar to |
CEI 56-39 : 2000 | GOODNESS-OF-FIT TESTS, CONFIDENCE INTERVALS AND LOWER CONFIDENCE LIMITS FOR WEIBULL DISTRIBUTED DATA |
PD CR 14245:2001 | Guidelines for the application of EN 197-2. Conformity Evaluation |
09/30205529 DC : 0 | BS EN 459-3 - BUILDING LIME - PART 3: CONFORMITY EVALUATION |
CEI EN 62058-11 : 2011 | ELECTRICITY METERING EQUIPMENT (A/C/) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
BS ISO 5667-12:2017 | Water quality. Sampling Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas |
S.R. CEN TR 15840:2009 | EVALUATION OF CONFORMITY OF FLY ASH FOR CONCRETE - GUIDELINES FOR THE APPLICATION OF EN 450-2 |
02/104526 DC : DRAFT JULY 2002 | EN 13263-2 - SILICA FUME FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
ONORM EN ISO 12958 : 2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE |
DIN EN 1006:2009-10 | Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties |
11/30218527 DC : 0 | BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS |
BS 2846-3:1975 | Guide to statistical interpretation of data Determination of a statistical tolerance interval |
12/30247200 DC : 0 | BS ISO 3951-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
15/30318694 DC : 0 | BS ISO 12828-2 - VALIDATION METHODS FOR FIRE GAS ANALYSES - PART 2: VALIDATION OF QUANTIFICATION METHOD |
17/30338834 DC : 0 | BS EN ISO 11058 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD |
BS 6002-4.1:1994 | Sampling procedures for inspection by variables. Specification for sequential sampling plans for percent nonconforming. Known standard deviation |
DD ENV 1006:2003 | Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties |
DD ENV 197-2:1996 | Cement Conformity evaluation |
18/30333968 DC : 0 | BS ISO 8573-4 - COMPRESSED AIR - CONTAMINANT MEASUREMENT - PART 4: PARTICLE CONTENT |
BS ISO 16269-6:2014 | Statistical interpretation of data Determination of statistical tolerance intervals |
08/30185918 DC : 0 | BS EN 1006 - ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
BS ISO 11648-1:2003 | Statistical aspects of sampling from bulk materials General principles |
BS EN 61649:2008 | Weibull analysis |
05/30130595 DC : DRAFT MAR 2005 | BS EN 15167-2 - GROUND GRANULATED BLASTFURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
CSA ISO/TR 10017 : 2003 : R2013 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
BS EN 61810-2:2017 | Electromechanical elementary relays Reliability |
ISO 22514-7:2012 | Statistical methods in process management Capability and performance Part 7: Capability of measurement processes |
I.S. EN ISO 10776:2012 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, UNDER LOAD (ISO 10776:2012) |
I.S. EN 61649:2008 | WEIBULL ANALYSIS |
DD CEN/TS 14632:2006 | Plastics piping systems for drainage, sewerage and water supply, pressure and non-pressure. Glass-reinforced thermosetting plastics (GRP) based on polyester resin (UP). Guidance for the assessment of conformity |
IEC 60810:2017 | Lamps, light sources and LED packages for road vehicles - Performance requirements |
ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
ISO 12828-2:2016 | Validation method for fire gas analysis Part 2: Intralaboratory validation of quantification methods |
ISO 3951-3:2007 | Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
ISO 3951-5:2006 | Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
DIN EN ISO 10456:2010-05 | Building materials and products - Hygrothermal properties - Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007 + Cor. 1:2009); German version EN ISO 10456:2007 + AC:2009 |
UNE-EN ISO 12958:2010 | Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:2010) |
BS EN 450-2:2005 | Fly ash for concrete Conformity evaluation |
BS EN ISO 16890-2:2016 | Air filters for general ventilation Measurement of fractional efficiency and air flow resistance |
UNE-EN ISO 16890-2:2017 | Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016) |
BS EN ISO 11058:2010 | Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, without load |
EN 197-2:2014 | Cement - Part 2: Conformity evaluation |
BS EN 326-2 : 2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
15/30278074 DC : 0 | BS EN ISO 16890-3 - AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED |
UNE-EN ISO 16890-3:2017 | Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016) |
BS EN ISO 16890-3:2016 | Air filters for general ventilation Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
DIN EN ISO 15007-1:2003-10 | ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS - PART 1: DEFINITIONS AND PARAMETERS |
EN 12603:2002 | Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data |
EN 60810 : 2018 | LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
EN ISO 10456:2007/AC:2009 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
EN 12260:2003 | Water quality - Determination of nitrogen - Determination of bound nitrogen (TNb), following oxidation to nitrogen oxides |
EN 1006:2009 | Advanced technical ceramics - Monolithic ceramics - Guidance on the selection of test pieces for the evaluation of properties |
ENV 197-2 : 1995 | CEMENT - CONFORMITY EVALUATION |
UNI EN ISO 29461-1 : 2013 | AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS |
EN 61649:2008 | Weibull analysis |
I.S. EN IEC 60810:2018 | LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
07/30112904 DC : 0 | BS IEC 61649 - WEIBULL ANALYSIS - GOODNESS-OF-FIT TESTS AND CONFIDENCE INTERVALS FOR WEIBULL DISTRIBUTED DATA |
I.S. EN ISO 16890-3:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
I.S. EN 1482-1:2007 | FERTILIZERS AND LIMING MATERIALS - SAMPLING AND SAMPLE PREPARATION - PART 1: SAMPLING |
I.S. EN ISO 16890-2:2016 | AIR FILTERS FOR GENERAL VENTILATION - PART 2: MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIR FLOW RESISTANCE (ISO 16890-2:2016) |
I.S. EN 779:2012 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
17/30335786 DC : 0 | BS ISO 19867-1 - CLEAN COOKSTOVES AND CLEAN COOKING SOLUTIONS - HARMONIZED LABORATORY TEST PROTOCOLS - PART 1: STANDARD TEST SEQUENCE FOR EMISSIONS AND PERFORMANCE, SAFETY AND DURABILITY |
05/30136177 DC : DRAFT JULY 2005 | EN 1482-1 - FERTILIZERS AND LIMING MATERIALS - SAMPLING AND SAMPLE PREPARATION - PART 1: SAMPLING |
DIN EN ISO 10776:2012-12 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, UNDER LOAD (ISO 10776:2012) |
09/30204392 DC : 0 | BS ISO 12958 - GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE |
ISO 12500-2:2007 | Filters for compressed air — Test methods — Part 2: Oil vapours |
ONORM EN ISO 11058 : 2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD |
BS ISO 3951-4:2011 | Sampling procedures for inspection by variables Procedures for assessment of declared quality levels |
BS ISO 22514-7:2012 | Statistical methods in process management. Capability and performance Capability of measurement processes |
NF EN 61649 : 2008 | WEIBULL ANALYSIS |
03/102154 DC : DRAFT MAY 2003 | CEN TS 14632 - PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON UNSATURATED POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
12/30242633 DC : 0 | BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF STATISTICAL TOLERANCE INTERVALS |
BS ISO 8573-4:2001 | Compressed air Test methods for solid particle content |
BS ISO 8423:2008 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
DIN ISO 3951:1992-08 | SAMPLING PROCEDURES AND CHARTS FOR INSPECTION BY VARIABLES FOR PERCENT NONCONFORMING |
PD IEC/TS 62282-7-2:2014 | Fuel cell technologies Test methods. Single cell and stack performance tests for solid oxide fuel cells (SOFC) |
12/30254896 DC : 0 | BS EN 197-2 - CEMENT - PART 2: CONFORMITY EVALUATION |
05/30135474 DC : DRAFT JUNE 2005 | BS 600 - A GUIDE TO THE APPLICATION OF STATISTICAL METHODS TO QUALITY AND STANDARDIZATION |
BS ISO 7183:2007 | Compressed-air dryers. Specifications and testing |
08/30168462 DC : DRAFT APR 2008 | BS ISO 1217 - DISPLACEMENT COMPRESSORS - ACCEPTANCE TEST |
14/30298580 DC : 0 | BS EN 16480 - PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS |
I.S. EN 1006:2009 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
I.S. EN 60810:2015 | LAMPS FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
UNE-EN 62058-11:2011 | Electricity metering equipment (a.c.) - Acceptance inspection -- Part 11: General acceptance inspection methods |
IEC 61810-2:2017 | Electromechanical elementary relays - Part 2: Reliability |
EN 61810-2:2017 | Electromechanical elementary relays - Part 2: Reliability |
PREN 16480 : DRAFT 2017 | PUMPS - ROTODYNAMIC PUMPS - MINIMUM REQUIRED EFFICIENCY OF WATER PUMPS AND METHODS OF QUALIFICATION AND VERIFICATION |
DIN EN 197-2:2014-05 | CEMENT - PART 2: CONFORMITY EVALUATION |
ISO 7183:2007 | Compressed-air dryers Specifications and testing |
DIN EN 326-2:2014-10 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control; German version EN 326-2:2010+A1:2014 |
DIN EN ISO 16890-3:2015-08 (Draft) | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
DD ISO/TS 21220:2009 | Particulate air filters for general ventilation. Determination of filtration performance |
IEC 62058-11:2008 | Electricity metering equipment (AC) - Acceptance inspection - Part 11: General acceptance inspection methods |
ISO 10456:2007 | Building materials and products — Hygrothermal properties — Tabulated design values and procedures for determining declared and design thermal values |
I.S. EN ISO 10456:2007 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
I.S. EN ISO 15007-1:2014 | ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS - PART 1: DEFINITIONS AND PARAMETERS (ISO 15007-1:2014) |
I.S. EN ISO 12958:2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE |
DIN EN 197-2:2000-11 | CEMENT - PART 2: CONFORMITY EVALUATION |
UNI EN ISO 12958 : 2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE |
I.S. EN 326-2:2010 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
UNI ISO/TR 18532 : 2010 | Guide to the application of statistical methods for quality and standardization in the industrial sector |
BS 6000:1996 | Guide for the selection of an acceptance sampling system, scheme or plan for inspection of discrete items in lots |
DIN EN ISO 16890-3:2017-08 | AIR FILTERS FOR GENERAL VENTILATION - PART 3: DETERMINATION OF THE GRAVIMETRIC EFFICIENCY AND THE AIR FLOW RESISTANCE VERSUS THE MASS OF TEST DUST CAPTURED (ISO 16890-3:2016) |
BS 2846-7:1997 | Guide to statistical interpretation of data Tests for departure from normality |
I.S. EN 12260:2003 | WATER QUALITY - DETERMINATION OF NITROGEN - DETERMINATION OF BOUND NITROGEN (TNB), FOLLOWING OXIDATION TO NITROGEN OXIDES |
I.S. EN 450-2:2005 | FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
BS EN 62058-11:2010 | Electricity metering equipment (a.c.). Acceptance inspection General acceptance inspection methods |
16/30314233 DC : 0 | BS ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE |
PD CEN/TR 14245:2014 | Cement. Guidelines for the application of EN 197-2 Conformity Evaluation |
03/312758 DC : DRAFT AUG 2003 | ISO 6658 - SENSORY ANALYSIS - METHODOLOGY - GENERAL GUIDANCE |
02/400873 DC : DRAFT OCT 2002 | BS 6002-1 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
BS ISO 8573-5:2001 | Compressed air Test methods for oil vapour and organic solvent content |
ISO 8573-4:2001 | Compressed air Part 4: Test methods for solid particle content |
ISO/TR 18532:2009 | Guidance on the application of statistical methods to quality and to industrial standardization |
UNE-ISO 16269-6:2015 | Statistical interpretation of data - Part 6: Determination of statistical tolerance intervals |
09/30142128 DC : 0 | BS ISO 11462-2 - GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
BS EN 1006:2009 | Advanced technical ceramics. Monolithic ceramics. Guidance on the selection of test pieces for the evaluation of properties |
I.S. EN 62058-11:2010 | ELECTRICITY METERING EQUIPMENT (A.C.) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
16/30269189 DC : DRAFT JAN 2016 | BS ISO 5667-12 - WATER QUALITY - SAMPLING - PART 12: GUIDANCE ON SAMPLING OF BOTTOM SEDIMENTS |
BS EN ISO 10776:2012 | Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, under load |
S.R. CEN/TR 14245:2014 | CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
02/100390 DC : DRAFT JAN 2002 | PREN 450-2 - FLY ASH FOR CONCRETE - PART 2: CONFORMITY EVALUATION |
ISO 1217:2009 | Displacement compressors Acceptance tests |
UNI ISO 22514-7:2014 | STATISTICAL METHODS IN PROCESS MANAGEMENT - CAPABILITY AND PERFORMANCE - PART 7: CAPABILITY OF MEASUREMENT PROCESSES |
BS ISO 1217 : 2009 | DISPLACEMENT COMPRESSORS - ACCEPTANCE TESTS |
ISO 11648-1:2003 | Statistical aspects of sampling from bulk materials — Part 1: General principles |
ISO 6658:2017 | Sensory analysis — Methodology — General guidance |
BS EN IEC 60810:2018 | Lamps, light sources and led packages for road vehicles. Performance requirements |
PREN 197-2 : DRAFT 2012 | CEMENT - PART 2: CONFORMITY EVALUATION |
UNI ISO/TR 8550-3 : 2014 | GUIDANCE ON THE SELECTION AND USAGE OF ACCEPTANCE SAMPLING SYSTEMS FOR INSPECTION OF DISCRETE ITEMS IN LOTS - PART 3: SAMPLING BY VARIABLES |
ISO 11058:2010 | Geotextiles and geotextile-related products Determination of water permeability characteristics normal to the plane, without load |
ISO 12500-1:2007 | Filters for compressed air Test methods Part 1: Oil aerosols |
ISO 5667-10:1992 | Water quality Sampling Part 10: Guidance on sampling of waste waters |
I.S. EN ISO 11058:2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD |
NF EN ISO 11058 : 2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD |
S.R. CR 14245:2001 | GUIDELINES FOR THE APPLICATION OF EN 197-2 'CONFORMITY EVALUATION' |
DIN EN 12260:2003-12 | Water quality - Determination of nitrogen - Determination of bound nitrogen (TN), following oxidation to nitrogen oxides |
DIN EN ISO 16890-2 E : 2017 | AIR FILTERS FOR GENERAL VENTILATION - PART 2: MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIR FLOW RESISTANCE (ISO 16890-2:2016) |
DIN EN ISO 29461-1:2014-03 | Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013) |
UNE-EN ISO 10456:2012 | Building materials and products - Hygrothermal properties -Tabulated design values and procedures for determining declared and design thermal values (ISO 10456:2007) |
BS EN 197-2:2014 | Cement Conformity evaluation |
ONORM EN 197-2 : 2014 | CEMENT - PART 2: CONFORMITY EVALUATION |
UNE-EN ISO 11058:2010 | Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010) |
UNE-EN 779:2013 | Particulate air filters for general ventilation - Determination of the filtration performance |
DIN EN ISO 16890-2:2017-08 | Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016) |
UNI EN ISO 15007-1 : 2014 | ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS - PART 1: DEFINITIONS AND PARAMETERS |
UNI EN 15167-2 : 2006 | GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
BS 4200-3:1979 | Guide on the reliability of electronic equipment and parts used therein Presentation of reliability data on electronic components (or parts) |
UNI EN 326-2 : 2014 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
UNI EN ISO 11058 : 2010 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD |
ISO 29461-1:2013 | Air intake filter systems for rotary machinery Test methods Part 1: Static filter elements |
UNI EN ISO 10456 : 2008 | BUILDING MATERIALS AND PRODUCTS - HYGROTHERMAL PROPERTIES - TABULATED DESIGN VALUES AND PROCEDURES FOR DETERMINING DECLARED AND DESIGN THERMAL VALUES |
UNI ISO 13053-2 : 2014 | QUANTITATIVE METHODS IN PROCESS IMPROVEMENT - SIX SIGMA - PART 2: TOOLS AND TECHNIQUES |
UNI EN 779 : 2012 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
BS ISO 13053-2:2011 | Quantitative methods in process improvement. Six Sigma Tools and techniques |
BS IEC 60605-4:2001 | Equipment reliability testing Statistical procedures for exponential distribution. Point estimates, confidence intervals, prediction intervals and tolerance intervals |
UNI CEN/TR 14245 : 2015 | CEMENT - GUIDELINES FOR THE APPLICATION OF EN 197-2 CONFORMITY EVALUATION |
UNI EN ISO 10776 : 2012 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, UNDER LOAD |
BS 6068-2.83(2003) : 2003 | WATER QUALITY - DETERMINATION OF NITROGEN - DETERMINATION OF BOUND NITROGEN (TN[B]), FOLLOWING OXIDATION TO NITROGEN OXIDES |
17/30344899 DC : 0 | BS ISO 17123-5 - OPTICS AND OPTICAL INSTRUMENTS - FIELD PROCEDURES FOR TESTING GEODETIC AND SURVEYING INSTRUMENTS - PART 5: TOTAL STATIONS |
UNI EN 1006 : 2009 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
UNI ISO 3951-4 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 4: PROCEDURES FOR ASSESSMENT OF DECLARED QUALITY LEVELS |
BS ISO 3951-1:2013 | Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
BS 6068-2.62(1998) : 1998 | WATER QUALITY - PHYSICAL, CHEMICAL AND BIOCHEMICAL METHODS - DETERMINATION OF NITROGEN - METHOD USING OXIDATIVE DIGESTION WITH PEROXODISULFATE |
BS ISO 12500-1:2007 | Filters for compressed air. Test methods Oil aerosols |
09/30196396 DC : 0 | BS ISO 13822 - BASES FOR DESIGN OF STRUCTURES - ASSESSMENT OF EXISTING STRUCTURES |
PD CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete. Guidelines for the application of EN 450-2 |
94/110814 DC : DRAFT JAN 1995 | ISO/DIS 12576 - THERMAL INSULATING MATERIALS AND PRODUCTS FOR BUILDINGS - CONFORMITY CONTROL SYSTEMS |
04/30119227 DC : DRAFT SEP 2004 | BS ISO 6002-2 - SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 2: GENERAL SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION OF INDEPENDENT QUALITY CHARACTERISTICS |
UNI ISO 11462-2 : 2014 | GUIDELINES FOR IMPLEMENTATION OF STATISTICAL PROCESS CONTROL (SPC) - PART 2: CATALOGUE OF TOOLS AND TECHNIQUES |
ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
12/30227451 DC : DRAFT AUG 2012 | BS EN 16480 - PUMPS - MINIMUM REQUIRED EFFICIENCY OF ROTODYNAMIC WATER PUMPS |
PREN ISO 15007-1 : DRAFT 2013 | ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS - PART 1: DEFINITIONS AND PARAMETERS (ISO/DIS 15007-1:2013) |
BS ISO 8573-6:2003 | Compressed air Test methods for gaseous contaminant content |
BS ISO 19003:2006 | Rubber and rubber products. Guidance on the application of statistics to physical testing |
PD ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
UNE-ISO 3951-1:2012 | Sampling procedures for inspection by variables -- Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
BS 6002-4:2006 | Sampling procedures for inspection by variables Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
UNE-EN 61649:2012 | Weibull analysis |
UNI ISO 11648-1 : 2008 | STATISTICAL ASPECTS OF SAMPLING FROM BULK MATERIALS - PART 1: GENERAL PRINCIPLES |
GOST R ISO 16269-6 : 2005 | STATISTICAL METHODS - STATISTICAL INTERPRETATION OF DATA - DETERMINATION OF STATISTICAL TOLERANCE INTERVALS |
ISO 10576-1:2003 | Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles |
ISO 5667-12:2017 | Water quality — Sampling — Part 12: Guidance on sampling of bottom sediments from rivers, lakes and estuarine areas |
ISO 8688-2:1989 | Tool life testing in milling — Part 2: End milling |
PREN 459-3 : DRAFT 2009 | BUILDING LIME - PART 3: CONFORMITY EVALUATION |
EN IEC 60810:2018 | Lamps, light sources and led packages for road vehicles - Performance requirements |
ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
I.S. ENV 1006:2003 | ADVANCED TECHNICAL CERAMICS - MONOLITHIC CERAMICS - GUIDANCE ON THE SELECTION OF TEST PIECES FOR THE EVALUATION OF PROPERTIES |
ISO 39511:2018 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
ISO 14820-1:2016 | Fertilizers and liming materials Sampling and sample preparation Part 1: Sampling |
I.S. EN 61810-2:2017 | ELECTROMECHANICAL ELEMENTARY RELAYS - PART 2: RELIABILITY |
ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
S.R. ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
CEN/TR 15840:2009 | Evaluation of conformity of fly ash for concrete - Guidelines for the application of EN 450-2 |
PREN ISO 12958 : DRAFT 2009 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER FLOW CAPACITY IN THEIR PLANE |
ISO 11462-2:2010 | Guidelines for implementation of statistical process control (SPC) — Part 2: Catalogue of tools and techniques |
ISO 8573-5:2001 | Compressed air — Part 5: Test methods for oil vapour and organic solvent content |
ISO 14595:2014 | Microbeam analysis — Electron probe microanalysis — Guidelines for the specification of certified reference materials (CRMs) |
ISO/TR 8550-3:2007 | Guidance on the selection and usage of acceptance sampling systems for inspection of discrete items in lots Part 3: Sampling by variables |
DIN EN ISO 12958:2010-08 | Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:2010) |
16/30350012 DC : 0 | BS EN 60810 - LAMPS, LIGHT SOURCES AND LED PACKAGES FOR ROAD VEHICLES - PERFORMANCE REQUIREMENTS |
ISO 15007-1:2014 | Road vehicles Measurement of driver visual behaviour with respect to transport information and control systems Part 1: Definitions and parameters |
BS EN 779:2012 | Particulate air filters for general ventilation. Determination of the filtration performance |
ISO 12958:2010 | Geotextiles and geotextile-related products Determination of water flow capacity in their plane |
BS EN 12838:2000 | Installations and equipment for liquefied natural gas. Suitability testing of LNG sampling systems |
ISO 16890-2:2016 | Air filters for general ventilation — Part 2: Measurement of fractional efficiency and air flow resistance |
ISO 16890-3:2016 | Air filters for general ventilation Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured |
UNI EN 197-2 : 2014 | CEMENT - PART 2: CONFORMITY EVALUATION |
07/30113225 DC : 0 | BS ISO 21220 - PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
BS EN 12260:2003 | Water quality. Determination of nitrogen. Determination of bound nitrogen (TN<sub>b</sub>), following oxidation to nitrogen oxides |
BS EN ISO 15007-1:2014 | Road vehicles. Measurement of driver visual behaviour with respect to transport information and control systems Definitions and parameters |
BS EN 20140-2:1993 | Determination, verification and application of precision data |
ISO 10776:2012 | Geotextiles and geotextile-related products — Determination of water permeability characteristics normal to the plane, under load |
I.S. EN 197-2:2014 | CEMENT - PART 2: CONFORMITY EVALUATION |
CEN/TR 14245:2014 | Cement - Guidelines for the application of EN 197-2 Conformity Evaluation |
09/30200844 DC : 0 | BS EN 779 - PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
ISO/TS 21220:2009 | Particulate air filters for general ventilation Determination of filtration performance |
IEC 61649:2008 | Weibull analysis |
ISO 13053-2:2011 | Quantitative methods in process improvement — Six Sigma — Part 2: Tools and techniques |
UNE-EN ISO 29461-1:2014 | Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013) |
UNE-ISO 13053-2:2012 | Quantitative methods in process improvement -- Six Sigma -- Part 2: Tools and techniques |
BS EN 60810:2015 | Lamps for road vehicles. Performance requirements |
10/30211683 DC : 0 | BS EN ISO 29461-1 - AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS |
14/30268894 DC : 0 | BS EN ISO 16890-2 - AIR FILTERS FOR GENERAL VENTILATION - PART 2: MEASUREMENT OF FRACTIONAL EFFICIENCY AND AIR FLOW RESISTANCE |
BS EN ISO 10456:2007 | Building materials and products. Hygrothermal properties. Tabulated design values and procedures for determining declared and design thermal values |
UNE-ISO 3951-2:2012 | Sampling procedures for inspection by variables -- Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
BS EN 13562:2000 | Geotextiles and geotextile-related products. Determination of resistance to penetration by water (hydrostatic pressure test) |
BS EN ISO 11905-1:1998 | Water quality. Determination of nitrogen. Method using oxidative digestion with peroxodisulfate |
BS EN 1482-1:2007 | Fertilizers and liming materials. Sampling and sample preparation Sampling |
UNE-EN ISO 15007-1:2015 | Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2014) |
EN ISO 16890-2:2016 | Air filters for general ventilation - Part 2: Measurement of fractional efficiency and air flow resistance (ISO 16890-2:2016) |
EN 450-2:2005 | Fly ash for concrete - Part 2: Conformity evaluation |
ONORM EN ISO 29461-1 : 2014 | AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS (ISO 29461-1:2013) |
EN 779:2012 | Particulate air filters for general ventilation - Determination of the filtration performance |
EN 1482-1:2007 | Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling |
EN ISO 15007-1:2014 | Road vehicles - Measurement of driver visual behaviour with respect to transport information and control systems - Part 1: Definitions and parameters (ISO 15007-1:2014) |
EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout - Part 2: Conformity evaluation |
EN 326-2:2010+A1:2014 | Wood-based panels - Sampling, cutting and inspection - Part 2: Initial type testing and factory production control |
EN 918 : 1995 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DYNAMIC PERFORATION TEST (CONE DROP TEST) |
EN ISO 10776:2012 | Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012) |
EN ISO 12958:2010 | Geotextiles and geotextile-related products - Determination of water flow capacity in their plane (ISO 12958:2010) |
EN ISO 16890-3:2016 | Air filters for general ventilation - Part 3: Determination of the gravimetric efficiency and the air flow resistance versus the mass of test dust captured (ISO 16890-3:2016) |
EN ISO 11058:2010 | Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, without load (ISO 11058:2010) |
ISO 19003:2006 | Rubber and rubber products — Guidance on the application of statistics to physical testing |
13/30235808 DC : 0 | BS EN ISO 15007-1 - ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS - PART 1: DEFINITIONS AND PARAMETERS |
I.S. CEN TS 14632:2006 | PLASTICS PIPING SYSTEMS FOR DRAINAGE, SEWERAGE AND WATER SUPPLY, PRESSURE AND NON-PRESSURE - GLASS-REINFORCED THERMOSETTING PLASTICS (GRP) BASED ON POLYESTER RESIN (UP) - GUIDANCE FOR THE ASSESSMENT OF CONFORMITY |
07/30167025 DC : 0 | BS EN 62058-11 - ELECTRICITY METERING EQUIPMENT (AC) - ACCEPTANCE INSPECTION - PART 11: GENERAL ACCEPTANCE INSPECTION METHODS |
ISO 8423:2008 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
BS IEC 61649:1997 | Procedures for goodness-of-fit tests, confidence intervals and lower confidence limits for Weibull distributed data |
UNI ISO 3951-1 : 2014 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PART 1: SPECIFICATION FOR SINGLE SAMPLING PLANS INDEXED BY ACCEPTANCE QUALITY LIMIT (AQL) FOR LOT-BY-LOT INSPECTION FOR A SINGLE QUALITY CHARACTERISTIC AND A SINGLE AQL |
BS ISO 10725:2000 | Acceptance sampling plans and procedures for the inspection of bulk materials |
BS ISO 14595:2014 | Microbeam analysis. Electron probe microanalysis. Guidelines for the specification of certified reference materials (CRMs) |
UNE-EN ISO 10776:2012 | Geotextiles and geotextile-related products - Determination of water permeability characteristics normal to the plane, under load (ISO 10776:2012) |
BS ISO 8573-3:1999 | Compressed air Test methods for measurement of humidity |
BS ISO 12500-2:2007 | Filters for compressed air. Test methods Oil vapours |
09/30175168 DC : 0 | BS EN ISO 10769 - CLAY GEOSYNTHETIC BARRIERS (GBR-C) - DETERMINATION OF WATER ABSORPTION OF BENTONITE |
00/708386 DC : DRAFT MAY 2000 | ISO/DIS 15007-1 - ROAD VEHICLES - MEASUREMENT OF DRIVER VISUAL BEHAVIOUR WITH RESPECT TO TRANSPORT INFORMATION AND CONTROL SYSTEMS |
BS 6002-5(2011) : 2011 | SAMPLING PROCEDURES FOR INSPECTION BY VARIABLES - PROCEDURES FOR ASSESSMENT OF DECLARED QUALITY LEVELS |
CSA ISO/TR 10017:2003 | GUIDANCE ON STATISTICAL TECHNIQUES FOR ISO 9001:2000 |
03/102177 DC : DRAFT OCT 2003 | BS ISO 16269-6 - STATISTICAL INTERPRETATION OF DATA - PART 6: DETERMINATION OF A STATISTICAL TOLERANCE INTERVAL |
BS 6002-1:1993 | Sampling procedures for inspection by variables Specification for single sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection |
ISO 3951-4:2011 | Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels |
ISO 8688-1:1989 | Tool life testing in milling — Part 1: Face milling |
ISO 13822:2010 | Bases for design of structures Assessment of existing structures |
ISO 19867-1:2018 | Clean cookstoves and clean cooking solutions — Harmonized laboratory test protocols — Part 1: Standard test sequence for emissions and performance, safety and durability |
CEI EN 61649 : 2010 | WEIBULL ANALYSIS |
ISO 3951:1989 | Sampling procedures and charts for inspection by variables for percent nonconforming |
17/30367211 DC : 0 | BS EN 16480 - PUMPS - ROTODYNAMIC PUMPS - MINIMUM REQUIRED EFFICIENCY OF WATER PUMPS AND METHODS OF QUALIFICATION AND VERIFICATION |
ISO 8573-6:2003 | Compressed air — Part 6: Test methods for gaseous contaminant content |
DIN EN 326-2 E : 2000 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
EN ISO 29461-1:2013 | Air intake filter systems for rotary machinery - Test methods - Part 1: Static filter elements (ISO 29461-1:2013) |
DIN EN ISO 11058:2010-08 | GEOTEXTILES AND GEOTEXTILE-RELATED PRODUCTS - DETERMINATION OF WATER PERMEABILITY CHARACTERISTICS NORMAL TO THE PLANE, WITHOUT LOAD |
BS EN ISO 29461-1:2013 | Air intake filter systems for rotary machinery. Test methods Static filter elements |
BS EN ISO 12958:2010 | Geotextiles and geotextile-related products. Determination of water flow capacity in their plane |
BS EN 12603:2002 | Glass in building. Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data |
BS EN 15167-2:2006 | Ground granulated blast furnace slag for use in concrete, mortar and grout Conformity evaluation |
CR 14245:2001 | Guidelines for the application of EN 197-2 "Conformity Evaluation" |
I.S. EN ISO 29461-1:2013 | AIR INTAKE FILTER SYSTEMS FOR ROTARY MACHINERY - TEST METHODS - PART 1: STATIC FILTER ELEMENTS (ISO 29461-1:2013) |
EN 13562:2000 | Geotextiles and geotextile-related products - Determination of resistance to penetration by water (hydrostatic pressure test) |
DIN EN 326-2:2000-10 | WOOD-BASED PANELS - SAMPLING, CUTTING AND INSPECTION - PART 2: INITIAL TYPE TESTING AND FACTORY PRODUCTION CONTROL |
DIN EN 799 E : 2003 | BAR CODING - SYMBOLOGY SPECIFICATIONS "CODE 128" |
EN 62058-11:2010 | Electricity metering equipment (a.c.) - Acceptance inspection - Part 11: General acceptance inspection methods |
EN 12838:2000 | Installations and equipment for liquefied natural gas - Suitability testing of LNG sampling systems |
DIN EN 1482-1:2007-04 | Fertilizers and liming materials - Sampling and sample preparation - Part 1: Sampling |
DIN EN 450-2:2005-05 | Fly ash for concrete - Part 2: Conformity evaluation |
DIN EN 779:2012-10 | PARTICULATE AIR FILTERS FOR GENERAL VENTILATION - DETERMINATION OF THE FILTRATION PERFORMANCE |
BS 2750-2(1993) : 1993 | ACOUSTICS - MEASUREMENT OF SOUND INSULATION IN BUILDINGS AND OF BUILDING ELEMENTS - DETERMINATION, VERIFICATION AND APPLICATION OF PRECISION DATA |
I.S. EN 15167-2:2007 | GROUND GRANULATED BLAST FURNACE SLAG FOR USE IN CONCRETE, MORTAR AND GROUT - PART 2: CONFORMITY EVALUATION |
AS/NZS IEC 61649:2020 | Weibull analysis |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.