ISO 30013:2011
Current
Current
The latest, up-to-date edition.
Rubber and plastics hoses Methods of exposure to laboratory light sources Determination of changes in colour, appearance and other physical properties
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
French, English
Published date
06-10-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 30013:2011 specifies methods for the exposure of rubber and plastics hoses to three types of laboratory light source (xenon-arc, fluorescent UV and open-flame carbon-arc lamps).
These methods are designed to simulate the exposure of hoses used in an outdoor environment or in an indoor environment.
Four types of test piece (two strained and two unstrained upon exposure) are specified. Results from the three light sources and the different sets of exposure conditions specified are not comparable.
| DevelopmentNote |
Supersedes ISO/DIS 30013, ISO 11758 and ISO 8580. (10/2011)
|
| DocumentType |
Standard
|
| Pages |
23
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NBN EN ISO 30013 : 2011 | Identical |
| NEN EN ISO 30013 : 2011 | Identical |
| NS EN ISO 30013 : 2011 | Identical |
| I.S. EN ISO 30013:2011 | Identical |
| PN EN ISO 30013 : 2011 | Identical |
| SN EN ISO 30013:2012 | Identical |
| UNI EN ISO 30013 : 2011 | Identical |
| UNE-EN ISO 30013:2012 | Identical |
| BS EN ISO 30013:2011 | Identical |
| EN ISO 30013:2011 | Identical |
| NF EN ISO 30013 : 2011 | Identical |
| DIN EN ISO 30013:2012-03 | Identical |
| DIN EN 16436-1:2016-04 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| ISO 8028:2017 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying — Specification |
| UNE-EN 16436-1:2014 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| DIN EN 1947:2014-09 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| UNE-EN ISO 6224:2012 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
| BS EN ISO 5774:2016 | Plastics hoses. Textile-reinforced types for compressed-air applications. Specification |
| BS ISO 4642-1:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses for fixed systems |
| EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying - Specification (ISO 8028:2017) |
| I.S. EN 16436-1:2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| EN 16436-1:2014+A1:2015 | Rubber and plastics hoses, tubing and assemblies for use with propane and butane and their mixture in the vapour phase - Part 1: Hoses and tubings |
| UNE-EN ISO 3994:2014 | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014) |
| I.S. EN ISO 6224:2011 | THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION (ISO 6224:2011) |
| I.S. EN 1947:2014 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| I.S. EN ISO 5774:2016 | PLASTICS HOSES - TEXTILE-REINFORCED TYPES FOR COMPRESSED-AIR APPLICATIONS - SPECIFICATION (ISO 5774:2016) |
| I.S. EN ISO 14113:2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| I.S. EN ISO 3994:2014 | PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
| I.S. EN 694:2014 | FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| DIN EN 1947:2002-11 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| UNI EN 694 : 2014 | FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| BS EN ISO 8029:2014 | Plastics hose. General-purpose collapsible water hose, textile-reinforced. Specification |
| BS ISO 15686-2:2012 | Buildings and constructed assets. Service life planning Service life prediction procedures |
| 15/30301522 DC : 0 | BS ISO 13775-2 - THERMOPLASTIC TUBING AND HOSES FOR AUTOMOTIVE USE - PART 2: PETROLEUM-BASED-FUEL APPLICATIONS |
| BS EN 13618:2016 | Flexible hose assemblies in drinking water installations. Functional requirements and test methods |
| DIN EN ISO 8029:2014-12 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
| BS ISO 4642-2:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
| UNI EN ISO 8029 : 2014 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION |
| ISO 4642-1:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 1: Semi-rigid hoses for fixed systems |
| ISO 13775-1:2015 | Thermoplastic tubing and hoses for automotive use Part 1: Non-fuel applications |
| DIN EN ISO 14113:2014-02 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) (ISO 14113:2013) |
| DIN EN 694:2014-10 | FIRE-FIGHTING HOSES - SEMI-RIGID HOSES FOR FIXED SYSTEMS |
| DIN EN ISO 3994:2015-11 | PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION (ISO 3994:2014) |
| BS EN 694:2014 | Fire-fighting hoses. Semi-rigid hoses for fixed systems |
| UNI EN ISO 14113 : 2013 | GAS WELDING EQUIPMENT - RUBBER AND PLASTICS HOSE AND HOSE ASSEMBLIES FOR USE WITH INDUSTRIAL GASES UP TO 450 BAR (45 MPA) |
| UNI EN ISO 6224 : 2011 | THERMOPLASTICS HOSES, TEXTILE-REINFORCED, FOR GENERAL-PURPOSE WATER APPLICATIONS - SPECIFICATION |
| UNI EN 1947 : 2014 | FIRE-FIGHTING HOSES - SEMI-RIGID DELIVERY HOSES AND HOSE ASSEMBLIES FOR PUMPS AND VEHICLES |
| UNI EN ISO 3994 : 2014 | PLASTICS HOSES - HELICAL-THERMOPLASTIC-REINFORCED THERMOPLASTICS HOSES FOR SUCTION AND DISCHARGE OF AQUEOUS MATERIALS - SPECIFICATION |
| ISO 4642-2:2015 | Rubber and plastics hoses, non-collapsible, for fire-fighting service Part 2: Semi-rigid hoses (and hose assemblies) for pumps and vehicles |
| SAE J3082_201511 | Auxiliary Two Conductor Electrical Power Connector for Truck-Trailer High Power Jumper Cable |
| BS ISO 13775-1:2015 | Thermoplastic tubing and hoses for automotive use Non-fuel applications |
| ISO 15686-2:2012 | Buildings and constructed assets — Service life planning — Part 2: Service life prediction procedures |
| BS EN ISO 8028:2018 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying. Specification |
| I.S. EN ISO 8029:2014 | PLASTICS HOSE - GENERAL-PURPOSE COLLAPSIBLE WATER HOSE, TEXTILE-REINFORCED - SPECIFICATION (ISO 8029:2014) |
| ISO 13363:2016 | Rubber and plastics hoses for marine-engine wet-exhaust systems — Specification |
| I.S. EN 13618:2016 | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| ISO 6224:2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 3994:2014 | Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification |
| BS EN ISO 3994:2014 | Plastics hoses. Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials. Specification |
| UNE-EN 694:2015 | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| BS EN 1947:2014 | Fire-fighting hoses. Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| UNE-EN 1947:2015 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| UNE-EN ISO 5774:2016 | Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
| EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
| EN ISO 6224:2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
| EN 13618:2016 | Flexible hose assemblies in drinking water installations - Functional requirements and test methods |
| EN 1947:2014 | Fire-fighting hoses - Semi-rigid delivery hoses and hose assemblies for pumps and vehicles |
| EN ISO 3994:2014 | Plastics hoses - Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials - Specification (ISO 3994:2014) |
| EN 694:2014 | Fire-fighting hoses - Semi-rigid hoses for fixed systems |
| EN ISO 5774:2016 | Plastics hoses - Textile-reinforced types for compressed-air applications - Specification (ISO 5774:2016) |
| EN ISO 14113:2013 | Gas welding equipment - Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) (ISO 14113:2013) |
| DIN EN 13618:2016-05 (Draft) | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| 15/30317642 DC : 0 | BS EN ISO 8028 - RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION |
| UNE-EN ISO 8029:2014 | Plastics hose - General-purpose collapsible water hose, textile-reinforced - Specification (ISO 8029:2014) |
| BS ISO 13775-2:2016 | Thermoplastic tubing and hoses for automotive use Petroleum-based-fuel applications |
| ISO 13775-2:2016 | Thermoplastic tubing and hoses for automotive use Part 2: Petroleum-based-fuel applications |
| I.S. EN ISO 8028:2018 | RUBBER AND/OR PLASTICS HOSES AND HOSE ASSEMBLIES FOR AIRLESS PAINT SPRAYING - SPECIFICATION (ISO 8028:2017) |
| BS EN 16436-1 : 2014 | RUBBER AND PLASTICS HOSES, TUBING AND ASSEMBLIES FOR USE WITH PROPANE AND BUTANE AND THEIR MIXTURE IN THE VAPOUR PHASE - PART 1: HOSES AND TUBINGS |
| ISO 5774:2016 | Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
| BS EN ISO 14113:2013 | Gas welding equipment. Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 8029:2014 | Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
| DIN EN 13618:2017-03 | FLEXIBLE HOSE ASSEMBLIES IN DRINKING WATER INSTALLATIONS - FUNCTIONAL REQUIREMENTS AND TEST METHODS |
| DIN EN ISO 6224:2012-02 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications - Specification (ISO 6224:2011) |
| ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
| ISO 4892-1:2016 | Plastics — Methods of exposure to laboratory light sources — Part 1: General guidance |
| ISO 4665:2016 | Rubber, vulcanized or thermoplastic — Resistance to weathering |
| ISO 23529:2016 | Rubber General procedures for preparing and conditioning test pieces for physical test methods |
| ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
| ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
| ISO 4892-3:2016 | Plastics — Methods of exposure to laboratory light sources — Part 3: Fluorescent UV lamps |
| ISO 291:2008 | Plastics Standard atmospheres for conditioning and testing |
| ISO 4582:2017 | Plastics — Determination of changes in colour and variations in properties after exposure to glass-filtered solar radiation, natural weathering or laboratory radiation sources |
| ISO 4892-4:2013 | Plastics — Methods of exposure to laboratory light sources — Part 4: Open-flame carbon-arc lamps |
| ISO 4892-2:2013 | Plastics — Methods of exposure to laboratory light sources — Part 2: Xenon-arc lamps |
| ISO 105-A02:1993 | Textiles Tests for colour fastness Part A02: Grey scale for assessing change in colour |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.