ISO 4397:2011
Current
Current
The latest, up-to-date edition.
Fluid power connectors and associated components — Nominal outside diameters of tubes and nominal hose sizes
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Language(s)
English, French
Published date
07-10-2011
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO 4397:2011 specifies information on the nominal outside diameters of rigid or semi-rigid tubing and nominal hose sizes to be used with hydraulic and pneumatic fluid power connectors and associated components: a) nominal outside diameters for rigid or semi-rigid tubes, irrespective of material composition, used in fluid power; b) a list of nominal sizes for hoses made of rubber or plastic used in fluid power.
| Committee |
ISO/TC 131/SC 4
|
| DevelopmentNote |
Supersedes ANSI B93.59M. (10/2009) Supersedes ISO/DIS 4397. (10/2011)
|
| DocumentType |
Standard
|
| Pages |
4
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| BS ISO 4397:2011 | Identical |
| UNI ISO 4397 : 2012 | Identical |
| NEN ISO 4397 : 2011 | Identical |
| NS ISO 4397 : 2ED 1995 | Identical |
| NF ISO 4397 : 1993 | Identical |
| NBN E 48 013 : 1988 | Identical |
| NFE 48 061 : 1979 | Similar to |
| PN ISO 4397 : 1994 | Identical |
| 06/30156951 DC : DRAFT OCT 2006 | BS ISO 5675 - AGRICULTURAL TRACTORS AND MACHINERY - GENERAL PURPOSE QUICK-ACTION HYDRAULIC COUPLERS |
| 11/30238916 DC : 0 | BS ISO 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| BS ISO 14541:2013 | Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for general purpose |
| SAE J2614_201801 | Welded and Cold-Drawn, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Flaring, Cold Forming, Welding and Brazing |
| BS ISO 12151-2:2003 | Connections for hydraulic fluid power and general use. Hose fittings Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings |
| SAE J1453/1_201205 | Specification for O-Ring Face Seal Connectors: Part 1 - Tube Connection Details and Common Requirements for Performance and Tests |
| 00/715331 DC : 0 | ISO/CD 8434-6 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| 03/311277 DC : DRAFT JAN 2004 | ISO 3862-2 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL-WIRE-REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
| BS EN ISO 18752:2016 | Rubber hoses and hose assemblies. Wire- or textile-reinforced single-pressure types for hydraulic applications. Specification |
| 05/30129301 DC : DRAFT FEB 2005 | ISO/DIS 18752 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-REINFORCED CONSTANT-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| 07/30175157 DC : DRAFT DEC 2007 | BS ISO 3862 - RUBBER HOSES AND HOSE ASSEMBLIES - RUBBER-COVERED SPIRAL WIRE-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER BASED FLUIDS - SPECIFICATION |
| 07/30175126 DC : DRAFT DEC 2007 | BS ISO 1436 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED HYDRAULIC TYPES FOR OIL-BASED OR WATER-BASED FLUIDS - SPECIFICATION |
| ISO 3949:2009 | Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification |
| BS ISO 12151-5:2007 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-2 37° flared ends |
| BS ISO 18752 : 2014 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| ISO 14743:2004 | Pneumatic fluid power Push-in connectors for thermoplastic tubes |
| ISO 1219-2:2012 | Fluid power systems and components — Graphical symbols and circuit diagrams — Part 2: Circuit diagrams |
| BS ISO 23297:2017 | Thermoplastic hoses and hose assemblies. Wire or synthetic yarn reinforced single-pressure types for hydraulic applications. Specification |
| SAE J2593_201502 | Information Report for the Installation of Fluid Conductors and Connectors |
| ISO 11237-2:2006 | Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 2: Water-based fluid applications |
| ISO 14541:2013 | Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for general purpose |
| ISO 4079-2:2005 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| BS EN ISO 8434-4:2000 | Metallic tube connections for fluid power and general use 24° cone connectors with O-ring weld-on nipples |
| DIN ISO 10763:2004-03 | Hydraulic fluid power - Plain-end, seamless and welded precision steel tubes - Dimensions and nominal working pressures (ISO 10763:1994) |
| DIN ISO 12151-2:2004-01 | Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24? cone connector ends with O-rings (ISO 12151-2:2003) |
| DIN EN ISO 8434-1:2008-02 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| I.S. EN ISO 8434-1:2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| 03/311096 DC : DRAFT DEC 2003 | ISO 4079-2 - RUBBER HOSES AND HOSE ASSEMBLIES - TEXTILE REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
| 16/30290140 DC : 0 | BS EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| BS ISO 14540:2013 | Hydraulic fluid power. Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar) |
| 05/30135789 DC : DRAFT JUL 2005 | EN ISO 8434-1 - METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREES CONE CONNECTORS |
| BS ISO 8434-6:2009 | Metallic tube connections for fluid power and general use 60° cone connectors with or without O-ring |
| 14/30287215 DC : 0 | BS ISO 18869 - HYDRAULIC FLUID POWER - TEST METHODS FOR COUPLINGS ACTUATED WITH OR WITHOUT TOOLS |
| SAE J517_201710 | Hydraulic Hose |
| BS ISO 12151-6:2009 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 8434-6 60° cone ends |
| SAE J1754/2_201510 | Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced -Part 2: Ordering Information |
| UNI ISO 12151-6 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS |
| 17/30366640 DC : 0 | BS ISO 14743 - PNEUMATIC FLUID POWER - PUSH-IN CONNECTORS FOR THERMOPLASTIC TUBES |
| 07/30163202 DC : 0 | BS ISO 12151-3 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| 03/311275 DC : DRAFT DEC 2003 | ISO 1436-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE BRAID REINFORCED FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2 - WATER-BASED FLUID APPLICATIONS |
| SAE J1065_201605 | Nominal Reference Working Pressures for Steel Hydraulic Tubing |
| BS 6597:1985 | Specification for rubber and plastics hoses: internal diameters and tolerances and tolerances on length |
| SAE J1754/1_201707 | Hose Assemblies, Rubber, Hydraulic, Steel Wire Reinforced - Part 1: Procurement Document |
| SAE J2551/2_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 2: General Specifications and Performance Requirements |
| UNI ISO 12151-5 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 5: HOSE FITTINGS WITH ISO 8434-2 37 DEGREE FLARED ENDS |
| BS ISO 12151-1 : 2010 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| ISO 14540:2013 | Hydraulic fluid power — Dimensions and requirements for screw-to-connect quick-action couplings for use at a pressure of 72 MPa (720 bar) |
| SAE J1754/3_201510 | Hose Assemblies, Hydraulic, J517 100R Series Hose - Part 3: Procurement and Ordering Information |
| BS EN ISO 8434-1:2007 | Metallic tube connections for fluid power and general use 24 degree cone connectors |
| BS 4742-2:1993 | Hydraulic equipment for agricultural machinery Specification for quick-action hydraulic couplers for general purposes |
| ISO 10763:1994 | Hydraulic fluid power Plain-end, seamless and welded precision steel tubes Dimensions and nominal working pressures |
| ISO 7241:2014 | Hydraulic fluid power — Dimensions and requirements of quick-action couplings |
| BS 7198-1:1989 | Hydraulic fluid power quick-action couplings. Specification for dimensions and performance |
| CSA M5675 : 1992 | AGRICULTURAL TRACTORS AND MACHINERY - GENERAL PURPOSE QUICK-ACTION HYDRAULIC COUPLERS |
| UNI ISO 12151-3 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| BS EN ISO 3949:2014 | Plastics hoses and hose assemblies. Textile-reinforced types for hydraulic applications. Specification |
| BS ISO 18869:2017 | Hydraulic fluid power. Test methods for couplings actuated with or without tools |
| 03/311322 DC : DRAFT JAN 2004 | ISO 11237-2 - RUBBER HOSES AND HOSE ASSEMBLIES - WIRE-BRAID-REINFORCED COMPACT TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION - PART 2: WATER-BASED FLUID APPLICATIONS |
| BS ISO 1436-2:2005 | Rubber hoses and hose assemblies. Wire-braid-reinforced hydraulic types. Specification Water-based fluid applications |
| 07/30163197 DC : 0 | BS ISO 12151-1 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| BS ISO 1219-2:2012 | Fluid power systems and components. Graphical symbols and circuit diagrams Circuit diagrams |
| BS ISO 14743:2004 | Pneumatic fluid power. Push-in connectors for thermoplastic tubes |
| UNI ISO 8434-6 : 2012 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 6: 60 DEGREE CONE CONNECTORS WITH OR WITHOUT O-RING |
| MIL-DTL-52471-5 Revision C:2008 | HOSE, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R2 DOUBLE-WIRE-BRAIDED REINFORCEMENT HOSE |
| BS ISO 12151-3:2010 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| MIL-DTL-52471-4 Revision C:2008 | Hose, Rubber, Hydraulic Pressure-Type, Type 100R1 Single-Wire-Braided Reinforcement Hose |
| SAE J1677_201612 | Tests and Procedures for Carbon Steel and High Strength Low Alloy Steel Tubing |
| UNI EN ISO 8434-1 : 2007 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| SAE J2613_201710 | Welded Flash Controlled, High Strength (500 MPa Tensile Strength) Hydraulic Tubing, for Bending, Double Flaring, Cold Forming, Welding, and Brazing |
| ISO 12151-6:2009 | Connections for hydraulic fluid power and general use Hose fittings Part 6: Hose fittings with ISO 8434-6 60 degree cone ends |
| ISO 12151-4:2007 | Connections for hydraulic fluid power and general use Hose fittings Part 4: Hose fittings with ISO 6149 metric stud ends |
| UNI EN ISO 3949 : 2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| ISO 8434-6:2009 | Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring |
| ISO 8434-4:1995 | Metallic tube connections for fluid power and general use Part 4: 24 degree cone connectors with O-ring weld-on nipples |
| 11/30239328 DC : 0 | BS ISO 14540 - HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT QUICK-ACTION COUPLINGS FOR USE AT A PRESSURE OF 72 MPA (720 BAR) |
| BS ISO 5675:2008 | Agricultural tractors and machinery. General purpose quick-action hydraulic couplers |
| I.S. EN ISO 8434-4:2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| 11/30239331 DC : 0 | BS ISO 14541 - HYDRAULIC FLUID POWER - DIMENSIONS AND REQUIREMENTS FOR SCREW-TO-CONNECT TYPE QUICK-ACTION COUPLINGS FOR GENERAL PURPOSE |
| BS ISO 7241:2014 | Hydraulic fluid power. Dimensions and requirements of quick-action couplings |
| 13/30252560 DC : 0 | BS ISO 7241-1 - HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - PART 1: DIMENSIONS AND REQUIREMENTS |
| UNE-EN ISO 18752:2017 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| 09/30196676 DC : DRAFT OCT 2009 | BS ISO 1219-2 - FLUID POWER SYSTEMS AND COMPONENTS - GRAPHIC SYMBOLS AND CIRCUIT DIAGRAMS - PART 2: CIRCUIT DIAGRAMS |
| BS ISO 4079-2:2005 | Rubber hoses and hose assemblies. Textile-reinforced hydraulic types. Specification Water-based fluid applications |
| 00/715332 DC : DRAFT OCT 2000 | ISO/CD 12151-6 - CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREE CONE ENDS |
| 16/30317675 DC : 0 | BS EN ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| BS ISO 8434-4 : 1995 AMD 11038 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| BS ISO 7241-2:2000 | Hydraulic fluid power. Quick-action couplings Test methods |
| SAE J2551_201309 | Recommended Practices for Fluid Conductor Carbon and Alloy Steel Tubing Applications |
| SAE J2551/1_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications-Part 1: Design and Fabrication |
| SAE J2551/3_201302 | Recommended Practices for Fluid Conductor Carbon, Alloy and High Strength Low Alloy Steel Tubing Applications - Part 3: Procurement |
| I.S. EN ISO 18752:2016 | RUBBER HOSES AND HOSE ASSEMBLIES - WIRE- OR TEXTILE-REINFORCED SINGLE-PRESSURE TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 18752:2014) |
| ISO 12151-2:2003 | Connections for hydraulic fluid power and general use — Hose fittings — Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings |
| SAE J533_201702 | Flares for Tubing |
| ISO 12151-5:2007 | Connections for hydraulic fluid power and general use — Hose fittings — Part 5: Hose fittings with ISO 8434-2 37 degree flared ends |
| DIN EN ISO 8434-1:2016-10 (Draft) | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 1: 24 DEGREE CONE CONNECTORS |
| DIN EN ISO 3949:2016-08 (Draft) | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| ISO 3862-2:2005 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| ISO 12151-1:2010 | Connections for hydraulic fluid power and general use — Hose fittings — Part 1: Hose fittings with ISO 8434-3 O-ring face seal ends |
| EN ISO 3949:2014 | Plastics hoses and hose assemblies - Textile-reinforced types for hydraulic applications - Specification (ISO 3949:2009) |
| ISO 16028:1999 | Hydraulic fluid power — Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar) — Specifications |
| ISO 23297:2017 | Thermoplastic hoses and hose assemblies — Wire or synthetic yarn reinforced single-pressure types for hydraulic applications — Specification |
| ISO 8434-1:2007 | Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors |
| ISO 5675:2008 | Agricultural tractors and machinery General purpose quick-action hydraulic couplers |
| ISO 7241-2:2000 | Hydraulic fluid power Quick-action couplings Part 2: Test methods |
| ISO 7241-1:1987 | Hydraulic fluid power Quick-action couplings Part 1: Dimensions and requirements |
| EN ISO 18752:2016 | Rubber hoses and hose assemblies - Wire- or textile-reinforced single-pressure types for hydraulic applications - Specification (ISO 18752:2014) |
| EN ISO 8434-4 : 2000 | METALLIC TUBE CONNECTIONS FOR FLUID POWER AND GENERAL USE - PART 4: 24 DEGREE CONE CONNECTORS WITH O-RING WELD-ON NIPPLES |
| BS ISO 12151-4:2007 | Connections for hydraulic fluid power and general use. Hose fittings Hose fittings with ISO 6149 metric stud ends |
| 08/30183047 DC : DRAFT MAY 2008 | BS ISO 3949 - PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION |
| NF ISO 12151-6 : 2009 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 6: HOSE FITTINGS WITH ISO 8434-6 60 DEGREES CONE ENDS |
| NF ISO 12151-1 : 2010 AMD 1 2017 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 1: HOSE FITTINGS WITH ISO 8434-3 O-RING FACE SEAL ENDS |
| BS ISO 11237-1:2005 | Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Oil-based fluid applications |
| BS ISO 11237-2:2006 | Rubber hoses and hose assemblies. Wire-braid-reinforced compact types for hydraulic applications. Specification Water-based fluid applications |
| BS ISO 16028:1999 | Hydraulic fluid power. Flush-face type, quick-action couplings for use at pressures of 20 MPa (200 bar) to 31,5 MPa (315 bar). Specifications |
| MIL-DTL-52471-9 Revision B:2008 | Hose, Rubber: Hydraulic Pressure-Type; Type 100R12 Four-Spiral-Wrap Reinforcement Hose |
| UNI ISO 12151-4 : 2012 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 4: HOSE FITTINGS WITH ISO 6149 METRIC STUD ENDS |
| ANSI B93.113M : 87(R1993) | HYDRAULIC FLUID POWER - QUICK-ACTION COUPLINGS - DIMENSIONS & REQUIREMENTS |
| ISO 12151-3:2010 | Connections for hydraulic fluid power and general use Hose fittings Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends |
| I.S. EN ISO 3949:2014 | PLASTICS HOSES AND HOSE ASSEMBLIES - TEXTILE-REINFORCED TYPES FOR HYDRAULIC APPLICATIONS - SPECIFICATION (ISO 3949:2009) |
| ISO 18869:2017 | Hydraulic fluid power — Test methods for couplings actuated with or without tools |
| ISO 11237-1:2004 | Rubber hoses and hose assemblies Wire-braid-reinforced compact types for hydraulic applications Specification Part 1: Oil-based fluid applications |
| NF ISO 12151-3 : 2010 | CONNECTIONS FOR HYDRAULIC FLUID POWER AND GENERAL USE - HOSE FITTINGS - PART 3: HOSE FITTINGS WITH ISO 6162-1 OR ISO 6162-2 FLANGE ENDS |
| ISO 1436-2:2005 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 2: Water-based fluid applications |
| ISO 18752:2014 | Rubber hoses and hose assemblies Wire- or textile-reinforced single-pressure types for hydraulic applications Specification |
| DIN ISO 12151-3:2012-08 | Connections for hydraulic fluid power and general use - Hose fittings - Part 3: Hose fittings with ISO 6162-1 or ISO 6162-2 flange ends (ISO 12151-3:2010) |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| ISO 3305:1985 | Plain end welded precision steel tubes — Technical conditions for delivery |
| ISO 3304:1985 | Plain end seamless precision steel tubes — Technical conditions for delivery |
| ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.