ISO/IEC 15018:2004
Withdrawn
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
View Superseded by
Information technology Generic cabling for homes
Amended by
Available format(s)
Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users
Withdrawn date
20-03-2019
Superseded by
Published date
16-07-2004
Important note : Users cannot be edited or removed once added to your Multi user PDF.
ISO/IEC 15018:2004 specifies a generic cabling for three groups of applications in homes: Information and Communications Technologies (ICT), Broadcast and Communications Technologies (BCT), and Commands, Controls and Communications in Buildings (CCCB). It is intended to guide installations in new buildings or refurbishments, and also applies where cabling is installed to support only one or two of the three application groups listed above. A generic cabling infrastructure is specified based upon balanced cabling and / or coaxial cabling. ICT channels specified in this standard include optical fibre, but the wider use of fibre optical cabling in a home is for further study. The three groups of applications may also be supported by different types of cabling, which may be subject to other International Standards. For example, ISO/IE cabling for ICT applications in general for the office environment. While the cabling structure and reference implementations are matched to the home environment in ISO/IEC 15018:2004, the channel performances specified for ICT are identical to those specified in ISO/IEC 11801.
| DocumentType |
Standard
|
| Pages |
72
|
| PublisherName |
International Organization for Standardization
|
| Status |
Withdrawn
|
| SupersededBy |
| Standards | Relationship |
| NEN ISO/IEC 15018 : 2004 AMD 1 2009 | Identical |
| SAC GB/T 29269 : 2012 | Identical |
| AS/NZS ISO/IEC 15018:2005 | Identical |
| CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R2015 | Identical |
| CSA ISO/IEC 15018 : 2005 : R2010 | Identical |
| CSA ISO/IEC 15018 : 2005 : INC : AMD 1 : 2010 : R201000 | Identical |
| CSA ISO/IEC 15018:2005 | Identical |
| ISO/IEC 14762:2009 | Information technology Functional safety requirements for Home and Building Electronic Systems (HBES) |
| CAN/CSA-ISO/IEC 14543-3-1-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 3-1: Communication Layers - Application Layer for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-1:2006, first edition, 2006-09) |
| CSA ISO/IEC 14543-2-1 : 2007 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 2-1: INTRODUCTION AND DEVICE MODULARITY |
| CSA ISO/IEC 14543-3-1 : 2007 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 3-1: COMMUNICATION LAYERS - APPLICATION LAYER FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CSA ISO/IEC 14543-3-7 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-7: MEDIA AND MEDIA DEPENDENT LAYERS - RADIO FREQUENCY FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| I.S. EN 61280-4-2:2014 | FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT |
| ISO/IEC 14763-2:2012 | Information technology Implementation and operation of customer premises cabling Part 2: Planning and installation |
| ISO/IEC 18010:2002 | Information technology Pathways and spaces for customer premises cabling |
| ISO/IEC 14543-3-4:2007 | Information technology Home electronic system (HES) architecture Part 3-4: System management Management procedures for network based control of HES Class 1 |
| ISO/IEC 14543-3-6:2007 | Information technology Home electronic system (HES) architecture Part 3-6: Media and media dependent layers Network based on HES Class 1, twisted pair |
| EN 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
| ISO/IEC 14543-3-2:2006 | Information technology Home Electronic Systems (HES) Architecture Part 3-2: Communication layers Transport, network and general parts of data link layer for network based control of HES Class 1 |
| CEI CWA 50487 : 2006 | SMARTHOUSE CODE OF PRACTICE |
| PD ISO/IEC TR 29125:2010 | Information technology. Telecommunications cabling requirements for remote powering of terminal equipment |
| NF EN 50090-9-1 : 2004 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR |
| CSA ISO/IEC 14763-3 : 2015 | INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 3: TESTING OF OPTICAL FIBRE CABLING |
| CAN/CSA-ISO/IEC 14543-3-3-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 3-3: User Process for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-3:2007, first edition, 2007-01) |
| CSA ISO/IEC 14543-3-2 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 3-2: COMMUNICATION LAYERS - TRANSPORT, NETWORK AND GENERAL PARTS OF DATA LINK LAYER FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CSA ISO/IEC 14543-3-1 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 3-1: COMMUNICATION LAYERS - APPLICATION LAYER FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CSA ISO /IEC 14543-3-4 : 2007 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-4: SYSTEM MANAGEMENT - MANAGEMENT PROCEDURES FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CAN/CSA-ISO/IEC 14543-2-1-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 2-1: Introduction and Device Modularity (Adopted ISO/IEC 14543-2-1:2006, first edition, 2006-09) |
| CSA ISO/IEC 14543-3-4 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-4: SYSTEM MANAGEMENT - MANAGEMENT PROCEDURES FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CSA ISO/IEC 14543-3-3 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-3: USER PROCESS FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CEI EN 61935-3 : 2011 | TESTING OF BALANCED AND COAXIAL INFORMATION TECHNOLOGY CABLING - PART 3: INSTALLED CABLING AS SPECIFIED IN EN 50173-4 AND RELATED STANDARDS |
| ISO/IEC 14543-2-1:2006 | Information technology - Home electronic systems (HES) architecture Part 2-1: Introduction and device modularity |
| BS PD ISO/IEC TR 29106 : 2007 | INFORMATION TECHNOLOGY - GENERIC CABLING - INTRODUCTION TO THE MICE ENVIRONMENTAL CLASSIFICATION |
| ISO/IEC 14763-3:2014 | Information technology — Implementation and operation of customer premises cabling — Part 3: Testing of optical fibre cabling |
| ISO/IEC TR 29125:2010 | Information technology Telecommunications cabling requirements for remote powering of terminal equipment |
| IEC 61156-8:2009+AMD1:2013 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 8: Symmetrical pair/quad cables with transmission characteristics up to 1 200 MHz - Work area wiring - Sectional specification |
| IEC 61196-7:2011 | Coaxial communication cables - Part 7: Sectional specification for cables for BCT cabling in accordance with ISO/IEC 15018 - Indoor drop cables for systems operating at 5 MHz - 3 000 MHz |
| I.S. EN 61918:2013 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES |
| BS EN 61280-4-2:2014 | Fibre-optic communication subsystem test procedures Installed cable plant. Single-mode attenuation and optical return loss measurement |
| 07/30144774 DC : 0 | BS EN 61935-3 - TESTING OF BALANCED COMMUNICATION CABLING IN ACCORDANCE WITH ISO/IEC 11801 - PART 3: VERIFICATION AND QUALIFICATION TESTING OF COMMUNICATION CABLING IN ACCORDANCE |
| CEI EN 61280-4-2 : 2015 | FIBRE-OPTIC COMMUNICATION SUBSYSTEM TEST PROCEDURES - PART 4-2: INSTALLED CABLE PLANT - SINGLE-MODE ATTENUATION AND OPTICAL RETURN LOSS MEASUREMENT |
| ISO/IEC TR 29108:2013 | Information technology — Terminology for intelligent homes |
| CEI 64-100/2 : 2009 | RESIDENTIAL BUILDINGS CRITERIA FOR THE INFRASTRUCTURES FOR ELECTRIC, ELECTRONIC AND COMMUNICATIONS INSTALLATIONS - PART 2: FLATS |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| I.S. EN 50090-9-1:2004 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR |
| IEC 61935-3:2008 | Testing of balanced and coaxial information technology cabling - Part 3: Installed cabling as specified in ISO/IEC 15018 and related standards |
| ISO/IEC 14543-3-5:2007 | Information technology Home electronic system (HES) architecture Part 3-5: Media and media dependent layers Power line for network based control of HES Class 1 |
| IEC 61918:2013 | Industrial communication networks - Installation of communication networks in industrial premises |
| EN 50090-9-1:2004 | Home and Building Electronic Systems (HBES) - Part 9-1: Installation requirements - Generic cabling for HBES Class 1 Twisted Pair |
| PD IEC/TR 62839-1:2014 | Environmental declaration Wires, cables and accessory products. Specific rules |
| BS EN 50090-9-1:2004 | Home and building electronic systems (HBES) Installation requirements - Generic cabling for HBES class 1 twisted pair |
| CAN/CSA-ISO/IEC 14543-3-7-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 3-7: Media and Media Dependent Layers - Radio Frequency for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-7:2007, first edition, 2007-01) |
| CSA ISO/IEC 14543-3-3 : 2007 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-3: USER PROCESS FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CSA ISO/IEC 14543-3-2 : 2007 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 3-2: COMMUNICATION LAYERS - TRANSPORT, NETWORK AND GENERAL PARTS OF DATA LINK LAYER FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CSA ISO/IEC 14543-2-1 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEMS (HES) ARCHITECTURE - PART 2-1: INTRODUCTION AND DEVICE MODULARITY |
| CSA ISO/IEC 14543-3-6 : 2007 : R2012 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CAN/CSA-ISO/IEC 14543-3-2-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 3-2: Communication Layers - Transport, Network and General Parts of Data Link Layer for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-2:2006, first edition, 2006-09) |
| CSA ISO/IEC 18010 :2004 | INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING |
| ISO/IEC 14908-2:2012 | Information technology — Control network protocol — Part 2: Twisted pair communication |
| CEI EN 50090-9-1 : 2005 | HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) - PART 9-1: INSTALLATION REQUIREMENTS - GENERIC CABLING FOR HBES CLASS 1 TWISTED PAIR |
| ISO/IEC 14543-3-3:2007 | Information technology Home electronic system (HES) architecture Part 3-3: User process for network based control of HES Class 1 |
| ISO/IEC 14543-3-1:2006 | Information technology Home electronic systems (HES) architecture Part 3-1: Communication layers Application layer for network based control of HES Class 1 |
| ISO/IEC 24740:2008 | Information technology Responsive Link (RL) |
| ISO/IEC 15067-3:2012 | Information technology — Home Electronic System (HES) application model — Part 3: Model of a demand-response energy management system for HES |
| IEC TR 62839-1:2014 | Environmental declaration - Part 1: Wires, cables and accessory products - Specific rules |
| ISO/IEC TR 29106:2007 | Information technology Generic cabling Introduction to the MICE environmental classification |
| BS EN 61918:2013 | Industrial communication networks. Installation of communication networks in industrial premises |
| IEC 61280-4-2:2014 | Fibre-optic communication subsystem test procedures - Part 4-2: Installed cable plant - Single-mode attenuation and optical return loss measurement |
| BS ISO/IEC 30129 : 2015 | INFORMATION TECHNOLOGY - TELECOMMUNICATIONS BONDING NETWORKS FOR BUILDINGS AND OTHER STRUCTURES |
| ISO/IEC 30129:2015 | Information technology Telecommunications bonding networks for buildings and other structures |
| CSA ISO/IEC 14762 : 2010 | INFORMATION TECHNOLOGY - FUNCTIONAL SAFETY REQUIREMENTS FOR HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) |
| 09/30211785 DC : 0 | BS ISO/IEC 14763-2 - INFORMATION TECHNOLOGY - IMPLEMENTATION AND OPERATION OF CUSTOMER PREMISES CABLING - PART 2: PLANNING AND INSTALLATION |
| CAN/CSA-ISO/IEC 14543-3-4-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 3-4: System Management - Management Procedures for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-4:2007, first edition, 2007-01) |
| CSA ISO/IEC 14543-3-6 : 2007 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-6: MEDIA AND MEDIA DEPENDENT LAYERS - TWISTED PAIR FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CAN/CSA-ISO/IEC 14543-3-6-07 (R2017) | Information Technology - Home Electronic System (HES) Architecture - Part 3-6: Media and Media Dependent Layers - Twisted Pair for Network Based Control of HES Class 1 (Adopted ISO/IEC 14543-3-6:2007, first edition, 2007-01) |
| CSA ISO/IEC 18010 : 2004 : INC : AMD 1 : 2006 : R2012 | INFORMATION TECHNOLOGY - PATHWAYS AND SPACES FOR CUSTOMER PREMISES CABLING |
| TR 105 174-5-1 : 1.1.1 | ACCESS, TERMINALS, TRANSMISSION AND MULTIPLEXING (ATTM); BROADBAND DEPLOYMENT - ENERGY EFFICIENCY AND KEY PERFORMANCE INDICATORS; PART 5: CUSTOMER NETWORK INFRASTRUCTURES; SUB-PART 1: HOMES (SINGLE-TENANT) |
| ISO/IEC 14543-3-7:2007 | Information technology Home electronic system (HES) architecture Part 3-7: Media and media dependent layers Radio frequency for network based control of HES Class 1 |
| EN 61918:2013/AC:2014 | INDUSTRIAL COMMUNICATION NETWORKS - INSTALLATION OF COMMUNICATION NETWORKS IN INDUSTRIAL PREMISES (IEC 61918:2013, MODIFIED) |
| CSA ISO/IEC 24740 : 2008 | INFORMATION TECHNOLOGY - RESPONSIVE LINK (RL) |
| CSA ISO/IEC 14543-3-5 : 2008 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-5: MEDIA AND MEDIA DEPENDENT LAYERS - POWERLINE FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| CSA ISO/IEC 24740 : 2008 : R2013 | INFORMATION TECHNOLOGY - RESPONSIVE LINK (RL) |
| CSA ISO/IEC 14543-3-5 : 2008 : R2013 | INFORMATION TECHNOLOGY - HOME ELECTRONIC SYSTEM (HES) ARCHITECTURE - PART 3-5: MEDIA AND MEDIA DEPENDENT LAYERS - POWERLINE FOR NETWORK BASED CONTROL OF HES CLASS 1 |
| IEC 61537:2006 | Cable management - Cable tray systems and cable ladder systems |
| IEC 60603-7-1:2011 | Connectors for electronic equipment - Part 7-1: Detail specification for 8-way, shielded, free and fixed connectors |
| IEC 60512-25-4:2001 | Connectors for electronic equipment - Tests and measurements - Part 25-4: Test 25d - Propagation delay |
| IEC 60512-23-7:2005 | Connectors for electronic equipment - Tests and measurements - Part 23-7: Screening and filtering tests - Test 23g: Effective transfer impedance of connectors |
| IEC 60364-5-54:2011 | Low-voltage electrical installations - Part 5-54: Selection and erection of electrical equipment - Earthing arrangements and protective conductors |
| IEC 60352-3:1993 | Solderless connections - Part 3: Solderless accessible insulation displacement connections - General requirements, test methods and practical guidance |
| IEC 60874-19-2:1999 | Connectors for optical fibres and cables - Part 19-2: Fibre optic adaptor (duplex) type SC for single-mode fibre connectors - Detail specification |
| IEC 60352-6:1997 | Solderless connections - Part 6: Insulation piercing connections - General requirements, test methods and practical guidance |
| IEC 60189-1:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 1: General test and measuring methods |
| IEC 60364-4-41:2005+AMD1:2017 CSV | Low voltage electrical installations - Part 4-41: Protection for safety - Protection against electric shock |
| IEC 60603-7-2:2010 | Connectors for electronic equipment - Part 7-2: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 100 MHz |
| IEC 60966-2-6:2016 | Radio frequency and coaxial cable assemblies - Part 2-6: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-24 connectors |
| IEC 60050-151:2001 | International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
| IEC 60332-1:1993 | Tests on electric cables under fire conditions - Part 1: Test on a single vertical insulated wire or cable |
| ISO/IEC 11801:2002 | Information technology Generic cabling for customer premises |
| IEC 60966-1:1999 | Radio frequency and coaxial cable assemblies - Part 1: Generic specification - General requirements and test methods |
| IEC TR 61000-5-2:1997 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 2: Earthing and cabling |
| IEC 61169-24:2009 | Radio-frequency connectors - Part 24: Sectional specification - Radio frequency coaxial connectors with screw coupling, typically for use in 75 Ω cable networks (type F) |
| IEC 60364-1:2005 | Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
| IEC 60227-1:2007 | Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V - Part 1: General requirements |
| IEC 61169-1:2013 | Radio frequency connectors - Part 1: Generic specification - General requirements and measuring methods |
| IEC 60874-19-1:2007 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-1: Fibre optic patch cord connector type SC-PC (floating duplex) standard terminated on multimode fibre type A1a, A1b - Detail specification |
| CISPR 22:2008 | Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement |
| IEC 62255-1:2003 | Multicore and symmetrical pair/quad cables for broadband digital communications (high bit rate digital access telecommunication networks) - Outside plant cables - Part 1: Generic specification |
| IEC 60512-25-1:2001 | Connectors for electronic equipment - Tests and measurements - Part 25-1: Test 25a - Crosstalk ratio |
| ISO/IEC 18010:2002 | Information technology Pathways and spaces for customer premises cabling |
| ISO/IEC 14763-1:1999 | Information technology Implementation and operation of customer premises cabling Part 1: Administration |
| IEC 61156-2:2010 | Multicore and symmetrical pair/quad cables for digital communications - Part 2: Symmetrical pair/quad cables with transmission characteristics up to 100 MHz - Horizontal floor wiring - Sectional specification |
| IEC 60603-7-3:2010 | Connectors for electronic equipment - Part 7-3: Detail specification for 8-way, shielded, free and fixed connectors, for data transmission with frequencies up to 100 MHz |
| IEC 61084-1:2017 | Cable trunking systems and cable ducting systems for electrical installations - Part 1: General requirements |
| IEC 60603-7:2008+AMD1:2011 CSV | Connectors for electronic equipment - Part 7: Detail specification for 8-way, unshielded, free and fixed connectors |
| IEC 60364-4-44:2007+AMD1:2015 CSV | Low-voltage electrical installations - Part 4-44: Protection for safety - Protection against voltage disturbances and electromagnetic disturbances |
| IEC 60512-25-2:2002 | Connectors for electronic equipment - Tests and measurements - Part 25-2: Test 25b - Attenuation (insertion loss) |
| IEC 60966-2-5:2016 | Radio frequency and coaxial cable assemblies - Part 2-5: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 1 000 MHz, IEC 61169-2 connectors |
| IEC 61935-1:2015 | Specification for the testing of balanced and coaxial information technology cabling - Part 1: Installed balanced cabling as specified in ISO/IEC 11801 and related standards |
| IEC 60874-19-3:2007 | Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors - Detail specification |
| IEC 61156-1:2007+AMD1:2009 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 1: Generic specification |
| IEC 60512-25-5:2004 | Connectors for electronic equipment - Tests and measurements - Part 25-5: Test 25e - Return loss |
| IEC 60966-2-4:2016 | Radio frequency and coaxial cable assemblies - Part 2-4: Detail specification for cable assemblies for radio and TV receivers - Frequency range 0 MHz to 3 000 MHz, IEC 61169-2 connectors |
| IEC 60603-8:1990 | Connectors for frequencies below 3 MHz for use with printed boards. Part 8: Two-part connectors for printed boards, for basic grid of 2.54 mm (0.1 in), with square male contacts of 0.63 mm x 0.63 mm |
| IEC 60189-2:2007 | Low-frequency cables and wires with PVC insulation and PVC sheath - Part 2: Cables in pairs, triples, quads and quintuples for inside installations |
| IEC 61156-7:2003+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 7: Symmetrical pair cables with transmissioncharacteristics up to 1 200 MHz - Sectional specification fordigital and analog communication cables |
| IEC 61156-6:2010+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 6: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Work area wiring -Sectional specification |
| IEC 61156-5:2009+AMD1:2012 CSV | Multicore and symmetrical pair/quad cables for digital communications - Part 5: Symmetrical pair/quad cables withtransmission characteristics up to 1 000 MHz - Horizontal floorwiring - Sectional specification |
| IEC 61196-1:2005 | Coaxial communication cables - Part 1: Generic specification - General, definitions and requirements |
| IEC 61935-2:2010 | Specification for the testing of balanced and coaxial information technology cabling - Part 2: Cords as specified in ISO/IEC 11801 and related standards |
| IEC 61156-4:2009 | Multicore and symmetrical pair/quad cables for digital communications - Part 4: Riser cables - Sectional specification |
| IEC 60603-7-5:2010 | Connectors for electronic equipment - Part 7-5: Detail specification for 8-way, shielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
| ISO/IEC TR 15044:2000 | Information technology Terminology for the Home Electronic System (HES) |
| IEC 61156-3:2008 | Multicore and symmetrical pair/quad cables for digital communications - Part 3: Work area cable - Sectional specification |
| IEC 61140:2016 | Protection against electric shock - Common aspects for installation and equipment |
| IEC 60603-7-7:2010 | Connectors for electronic equipment - Part 7-7: Detail specification for 8-way, shielded, free and fixed connectors for data transmission with frequencies up to 600 MHz |
| IEC 61076-3-104:2017 | Connectors for electrical and electronic equipment - Product requirements - Part 3-104: Detail specification for 8-way, shielded free and fixed connectors for data transmissions with frequencies up to 2 000 MHz |
| EN 50289-1-14:2004 | Communication cables - Specifications for test methods - Part 1-14: Electrical test methods - Coupling attenuation or screening attenuation of connecting hardware |
| IEC 60728-1:2014 | Cable networks for television signals, sound signals and interactive services - Part 1: System performance of forward paths |
| IEC 60512-3:1976 | Electromechanical components for electronic equipment; basic testing procedures and measuring methods. Part 3: Current-carrying capacity tests |
| CISPR 24:2010+AMD1:2015 CSV | Information technology equipment - Immunity characteristics - Limitsand methods of measurement |
| IEC 61169-2:2007 | Radio-frenquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors of type 9,52 |
| IEC TR 61000-5-1:1996 | Electromagnetic compatibility (EMC) - Part 5: Installation and mitigation guidelines - Section 1: General considerations - Basic EMC publication |
| IEC 60364-5-52:2009 | Low-voltage electrical installations - Part 5-52: Selection and erection of electrical equipment - Wiring systems |
| IEC 60603-7-4:2010 | Connectors for electronic equipment - Part 7-4: Detail specification for 8-way, unshielded, free and fixed connectors, for data transmissions with frequencies up to 250 MHz |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.