ISO/IEC 17025:2017
Current
Current
The latest, up-to-date edition.
General requirements for the competence of testing and calibration laboratories
Available format(s)
Hardcopy , PDF
Language(s)
English, French, Spanish, Castilian, Russian
Published date
29-11-2017
€172.00
Excluding VAT
ISO/IEC 17025:2017 specifies the general requirements for the competence, impartiality and consistent operation of laboratories.
ISO/IEC 17025:2017 is applicable to all organizations performing laboratory activities, regardless of the number of personnel.
Laboratory customers, regulatory authorities, organizations and schemes using peer-assessment, accreditation bodies, and others use ISO/IEC 17025:2017 in confirming or recognizing the competence of laboratories.
| Committee |
ISO/CASCO
|
| DevelopmentNote |
Supersedes NCSL RP 4 and NCSL RP 11 (06/2002) Supersedes ISO/IEC GUIDE 25. (08/2005) Supersedes IFI 139. (02/2014)
|
| DocumentType |
Standard
|
| Pages |
30
|
| ProductNote |
THIS STANDARDS ALSO HAVE CORRECTED VERSION IN ENGLISH AND FRENCH 2018
|
| PublisherName |
International Organization for Standardization
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| EN ISO/IEC 17025:2017 | Identical |
| CEI UNI EN ISO/IEC 17025:2018 | Identical |
| NF ISO 8769:2022 | Identical |
| DS/ISO/IEC 17025:2017 | Identical |
| PN EN ISO/IEC 17025 : 2018 | Identical |
| JIS Q 17025:2018 | Identical |
| NF EN ISO/IEC 17025 : 2017 | Identical |
| SS-EN ISO/IEC 17025:2018 | Identical |
| AS ISO/IEC 17025-2005 | Identical |
| BS EN ISO/IEC 17025:2017 | Identical |
| NEN EN ISO/IEC 17025 : 2018 | Identical |
| GOST ISO/IEC 17025 : 2019 | Identical |
| DIN EN ISO/IEC 17025:2018-03 | Identical |
| I.S. EN ISO/IEC 17025:2017&LC:2018 | Identical |
| AS ISO/IEC 17025:2018 | Identical |
| UNE-EN ISO/IEC 17025:2017 | Identical |
| NEMA EESCTG 2:2022 | Seismic Certification of Nonstructural Electrical Subcomponents by Shake-Table Testing Independent of the Parent Equipment |
| DSCC 23003:2023 | WIRE, ELECTRICAL, FLUOROPOLYMER INSULATED, SMOOTH SURFACE, NORMAL, EXTRA HIGH STRENGTH COPPER CONDUCTOR, NICKEL COATED, 260 °C, 600 VOLT |
| SAE AS6976 | Sleeving, Identification, Heat Shrinkable, General Specification |
| NFPA 1900:2024 | Standard for Aircraft Rescue and Fireghting Vehicles, Automotive Fire Apparatus, Wildland Fire Apparatus, and Automotive Ambulances |
| API SPEC 11D1 : 2015 INC ERR 1:2019 | Packers and Bridge Plugs |
| I.S. EN ISO 11737-2:2020 | Sterilization of health care products - Microbiological methods - Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process (ISO 11737-2:2019) |
| DSCC 04049F:2021 | CABLE, POWER, ELECTRICAL AND SPECIAL PURPOSE, SHIELDED AND UNSHIELDED, ELECTRICAL, COMPOSITE WIRE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED |
| CEI EN 50413 : 2010 | BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| ANSI/AAMI/ISO 11140-1:2014 | Sterilization of health care products - Chemical indicators - Part 1: General requirements. |
| DSCC 04042G:2021 | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 C, 600 VOLT<br> |
| CEI UNI ISO/IEC/TR 17032:2020 | Conformity assessment - Guidelines and examples of a scheme for the certification of processes |
| API SPEC 5CT:2018 INC ERR 3:2020 | Specification for Casing and Tubing |
| API STD 2RD:2013(R2020) | Dynamic Risers for Floating Production Systems, Second Edition |
| ASTM E 2924 : 2014 : R2020 | Standard Practice for Intumescent Coatings |
| DSCC 04043G:2021 | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 C, 600 VOLT |
| DSCC 04046G : 2021 | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 C, 600 VOLT |
| ASTM D 7911 : 2019 : REDLINE | Standard Guide for Using Reference Material to Characterize Measurement Bias Associated with Volatile Organic Compound Emission Chamber Test |
| DSCC 04048F:2021 | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, 26, 20, 18, 16 AWG, 600 VOLT |
| DSCC 04043H:2025 | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 200 C, 600 VOLT |
| DSCC 04044G : 2021 | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL COATED, HIGH STRENGTH OR ULTRA HIGH STRENGTH COPPER ALLOY, 260 C, 600 VOLT |
| API SPEC 5CT:2023 INC ERR 1:2024 | Casing and Tubing |
| CEI EN IEC 61400-6:2021 | Wind energy generation systems Part 6: Tower and foundation design requirements |
| DSCC 04047G:2021 | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, 30, 28, 26 AWG, 600 VOLT |
| API SPEC 19V : 2019 INC ERR 1:2019 | Subsurface Completion Isolation (Barrier) Valves and Related Equipment |
| I.S. EN ISO 10993-1:2020&LC:2021 | Biological evaluation of medical devices - Part 1: Evaluation and testing within a risk management process (ISO 10993-1:2018, including corrected version 2018-10) |
| DSCC 04045G : 2021 | WIRE, ELECTRICAL, COMPOSITE, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, LIGHT WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 C, 600 VOLT |
| AASHTO R 89 : 2018 | Standard Practice for Accreditation Bodies Operating in the Fields of Construction Materials Testing and Inspection |
| SAE AS13100 | AESQ Quality Management System Requirements for Aero Engine Design and Production Organizations |
| NFPA 18:2021 | Standard on Wetting Agents |
| API SPEC 11D1:2021 | Packers and Bridge Plugs |
| NFPA 1952:2021 | Standard on Surface Water Operations Protective Clothing and Equipment |
| NFPA 1986:2023 | Standard on Respiratory Protection Equipment for Tactical and Technical Operations |
| IEEE/IEC 62209-1528-2020 | IEC/IEEE International Standard - Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Part 1528: Human models, instrumentation, and procedures (Frequency range of 4 MHz to 10 GHz) |
| ASHRAE GUIDELINE 12 : 2020 | MANAGING THE RISK OF LEGIONELLOSIS ASSOCIATED WITH BUILDING WATER SYSTEMS |
| NFPA 1975:2019 | Standard on Emergency Services Work Apparel |
| NFPA 268:2022 | Standard Test Method for Determining Ignitability of Exterior Wall Assemblies Using a Radiant Heat Energy Source |
| API SPEC 11D1:2021+ADD1:2022 | Packers and Bridge Plugs |
| IEEE TSS : 2019 | Test Suite Specification: Synchrophasor - IEEE Synchrophasor Measurement Test Suite Specification--Version 3<br> |
| INCITS/ISO/IEC 24709-1:2019 | Information technology -- Conformance testing for the biometric application programming interface (BioAPI) -- Part 1: Methods and procedures |
| ASTM E 2554 : 2018 : EDT 1 | Standard Practice for Estimating and Monitoring the Uncertainty of Test Results of a Test Method Using Control Chart Techniques |
| NFPA 18A:2022 | Standard on Water Additives for Fire Control and Vapor Mitigation |
| NFPA 1936 : 2020 | Standard on Rescue Tools |
| ANSI/ASA S12.5-2016/ISO 6926:2016(R2020) | Acoustics – Requirements for the performance and calibration of reference sound sources used for the determination of sound power levels (a nationally adopted international standard) |
| NFPA 1987:2023 | Standard on Combination Unit Respirator Systems for Tactical and Technical Operations |
| NFPA 1150:2022 | Standard on Foam Chemicals for Fires in Class A Fuels |
| IEEE/ISO/IEC 29119-2-2021 REDLINE | ISO/IEC/IEEE International Standard - Software and systems engineering - Software testing -- Part 2: Test processes |
| API SPEC 11PL:2019 | Plunger Lift Lubricators and Related Equipment, First Edition |
| API SPEC 14L:2020 | Lock Mandrels and Landing Nipples |
| DSCC 04038H:2025 | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, NICKEL COATED, COPPER CONDUCTOR, 260 C, 600 VOLT |
| TT-C-490 Revision H:2021 | Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for Organic Coatings) |
| CSA ISO Z14161:2011(R2020) | Sterilization of health care products — Biological indicators — Guidance for the selection, use and interpretation of results |
| INCITS/ISO/IEC 17825:2024(2024) | Information Technology - Security Techniques - Testing Methods For The Mitigation Of Non-Invasive Attack Classes Against Cryptographic Modules |
| ASTM E 3187/E3187M : 2019 | Standard Specification for Less Lethal Aerosol Devices Used by Law Enforcement, Corrections, and Other Public Safety Officers |
| CLSI QMS02:2024 | Developing and Managing Laboratory Documents |
| NS-EN ISO 12183:2024 | Nuclear fuel technology - Controlled-potential coulometric measurement of plutonium (ISO 12183:2024) |
| SAE AMS1640D | Corrosion Removing Compound for Aircraft Surfaces |
| ECMA-74:2022 | Measurement of Airborne Noise emitted by Information Technology and Telecommunications Equipment |
| ECA EA-4/21 INF : 2018 | Guidelines for the assessment of the appropriateness of small interlaboratory comparisons within the process of laboratory accreditation |
| API SPEC 5CT CHINESE:2018 INC ERR1:2018 | Specification for Casing and Tubing, Tenth Edition, |
| API SPEC 11B:2023 | Sucker Rods and Rod-related Products |
| CEI UNI EN ISO 20387:2021 | Biotechnology - Biobanking - General requirements for biobanking (ISO 20387:2018) |
| API SPEC 19LH:2019 | Liner Hanger Equipment |
| API SPEC 5CT:2023 | Casing and Tubing |
| DSCC 97011E:2023 | RESISTOR, FIXED, FILM, PRECISION 0.15 WATT, POWER CURVE B |
| SAE AS7510B | Coupling Assembly, Threadless, Flexible, Self-Locking, Fixed Cavity, High Conductivity, Self-Bonding, Part Specification |
| CEI EN IEC 62321-3-4:2023 | Determination of certain substances in electrotechnical products Part 3-4: Screening - Phthalates in polymers of electrotechnical products by high performance liquid chromatography with ultraviolet detector (HPLCUV), thin layer chromatography (TLC) and thermal desorption mass spectrometry (TD-MS) |
| CLSI QMS16 : 2015(R2019) | LABORATORY PERSONNEL MANAGEMENT |
| DSCC 04039J:2026 | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 C, 600 VOLT |
| DSCC 04037G:2025 | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, SILVER COATED, COPPER CONDUCTOR, 200 C, 600 VOLT |
| DSCC 04039H:2025 | WIRE, ELECTRICAL, COMPOSITE, POLYAMIDE BRAID, POLYTETRAFLUOROETHYLENE/POLYIMIDE INSULATED, SMOOTH SURFACE, NORMAL WEIGHT, TIN COATED, COPPER CONDUCTOR, 150 C, 600 VOLT |
| NFPA 2112:2023 | Standard on Flame-Resistant Clothing for Protection of Industrial Personnel Against Short-Duration Thermal Exposures from Fire |
| JEDEC JEP132A.01:2022 | Process Characterization Guideline |
| ASTM E 2356 : 2018 | Standard Practice for Comprehensive Building Asbestos Surveys |
| CEI EN 50413 : 2021 | BASIC STANDARD ON MEASUREMENT AND CALCULATION PROCEDURES FOR HUMAN EXPOSURE TO ELECTRIC, MAGNETIC AND ELECTROMAGNETIC FIELDS (0 HZ - 300 GHZ) |
| ISO/IEC 17065:2012 | Conformity assessment — Requirements for bodies certifying products, processes and services |
| ISO/IEC 17000:2004 | Conformity assessment — Vocabulary and general principles |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO 17034:2016 | General requirements for the competence of reference material producers |
| AS ISO 13491.1:2019 | Financial services - Secure cryptographic devices (retail) Concepts, requirements and evaluation methods |
| ISO 19011:2011 | Guidelines for auditing management systems |
| ISO 15194:2009 | In vitro diagnostic medical devices — Measurement of quantities in samples of biological origin — Requirements for certified reference materials and the content of supporting documentation |
| ISO 15189:2012 | Medical laboratories — Requirements for quality and competence |
| ISO 31000:2009 | Risk management — Principles and guidelines |
| AS ISO 20387:2020 | Biotechnology - Biobanking - General requirements for biobanking |
| ISO/IEC Guide 98-4:2012 | Uncertainty of measurement — Part 4: Role of measurement uncertainty in conformity assessment |
| AS/NZS ISO 7176.2:2020 | Wheelchairs Determination of dynamic stability of electrically powered wheelchairs |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| AS/NZS IEC 61829:2020 | Photovoltaic (PV) array - On-site measurement of current-voltage characteristics |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO/IEC 17011:2004 | Conformity assessment — General requirements for accreditation bodies accrediting conformity assessment bodies |
| ISO Guide 80:2014 | Guidance for the in-house preparation of quality control materials (QCMs) |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology — Basic and general concepts and associated terms (VIM) |
| ISO 17511:2003 | In vitro diagnostic medical devices — Measurement of quantities in biological samples — Metrological traceability of values assigned to calibrators and control materials |
| ISO/IEC 17020:2012 | Conformity assessment — Requirements for the operation of various types of bodies performing inspection |
| ISO/IEC 17043:2010 | Conformity assessment — General requirements for proficiency testing |
| ISO Guide 30:2015 | Reference materials — Selected terms and definitions |
| IEC GUIDE 115:2007 | Application of uncertainty of measurement to conformity assessment activities in the electrotechnical sector |
| ISO/IEC 12207:2008 | Systems and software engineering — Software life cycle processes |
| AS/NZS 2699.1:2020 | Built-in components for masonry construction Wall ties |
| SA TR IEC 63170:2020 | Measurement procedure for the evaluation of power density related to human exposure to radio frequency fields from wireless communication devices operating between 6 GHz and 100 GHz |
| AS IEC 62209.3:2020 | Measurement procedure for the assessment of specific absorption rate of human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices Vector measurement-based systems (Frequency range of 600 MHz to 6 GHz) |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 9000:2015 | Quality management systems — Fundamentals and vocabulary |
| ISO 21748:2017 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty evaluation |
| ISO Guide 31:2015 | Reference materials — Contents of certificates, labels and accompanying documentation |
| AS ISO 3452.6:2020 | Non-destructive testing - Penetrant testing Penetrant testing at temperatures lower than 10 °C |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO/IEC 17021-1:2015 | Conformity assessment — Requirements for bodies providing audit and certification of management systems — Part 1: Requirements |
Frequently Asked Questions
Yes. The 2017 edition is current. Common adoptions include EN ISO/IEC 17025:2017 in Europe and AS ISO/IEC 17025:2018 in Australia, which are technically identical to the ISO/IEC text.
Hardcopy and secured PDF formats are available. Languages listed include English, French, Spanish and Russian.
ISO/IEC 17025:2017 is the International Standard that specifies the general requirements for the competence, impartiality and consistent operation of testing and calibration laboratories, including sampling.
ISO/IEC 17025:2017 is jointly published by the International Organization for Standardization (ISO) and the International Electrotechnical Commission (IEC).
It covers management and technical requirements for laboratories, including competence of personnel, validity of results, equipment, metrological traceability, sampling, handling of test/calibration items, and assurance of result quality.
Summarise
Important note : Users cannot be edited or removed once added to your Multi user PDF.