MIL-PRF-23377 Revision K:2012
Current
Current
The latest, up-to-date edition.
Primer Coatings: Epoxy, High-Solids
Available format(s)
PDF
Language(s)
English
Published date
07-06-2012
Publisher
€16.67
Excluding VAT
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. VERIFICATION
5. PACKAGING
6. NOTES
Describes corrosion inhibiting, chemical and solvent resistant, solvent-borne, high-solids epoxy primer coatings that have a maximum volatile organic compound (VOC) content of 340 grams per liter (g/L)(2.8 pounds per gallon [lb/gal]).
| DevelopmentNote |
Supersedes MIL P 23377 (F). (07/2004)
|
| DocumentType |
Standard
|
| Pages |
20
|
| ProductNote |
NEW CHILD NOT 1 2019 IS NOW ADDED.
|
| PublisherName |
US Military Specs/Standards/Handbooks
|
| Status |
Current
|
| Supersedes |
This specification covers the requirements for corrosion inhibiting, chemical and solvent resistant, solvent-borne, high-solids epoxy primer coatings that have a maximum volatile organic compound (VOC) content of 340 grams per liter (g/L)(2.8 pounds per gallon [lb/gal]) as supplied by the manufacturer.
| MIL-PRF-32239 Revision A:2014 | Coating System, Advanced Performance, for Aerospace Applications |
| MIL-PRF-32104 Base Document:2010 | Mobile Hydraulic Oil Dispenser |
| MIL-DTL-53072 Revision F:2017 | Chemical Agent Resistant Coating (CARC) System Application Procedures and Quality Control Inspection |
| SAE AMS2477A | Conversion Coating for Aluminum Alloys Low Electrical Resistance Coating |
| MIL-PRF-32405 Base Document:2013 | Cleaner, Hand Wipe, Metallic Substrates, Low or Exempt VOC and HAP Free |
| SAE AMS3166C | Solvents, Cleaning, Cleaning Prior to Application of Sealing Compounds |
| MIL-PRF-22750 Revision G:2011 | Coating, Epoxy, High-Solids |
| MIL-PRF-85322 Revision C:2014 | COATING, ELASTOMERIC, POLYURETHANE, RAIN-EROSION |
| MIL-PRF-81309 Revision G:2014 | Corrosion Preventive Compounds, Water Displacing, Ultra-Thin Film |
| MIL-PRF-6799 Revision L:2010 | Coatings, Sprayable, Strippable, Protective, Water Emulsion |
| SAE AS6116A | Aluminum Fittings, Axially Swaged Tube with Flareless Separable, Fluid System Up to 1500 psi (10340 kPa) Maximum, Specification for |
| SAE AMS3278B | Sealing and Coating Compound, Polyurethane (PUR) Fuel Resistant High Tensile Strength / Elongation For Integral Fuel Tanks / Fuel Cavities / General Purpose |
| SAE AMS3167B | Solvents, Wipe for Cleaning Prior to Application of Primer and Top Coat Materials, or Sealing Compounds |
| SAE AMS2480H | Phosphate Treatment Paint Base |
| SAE AMS3255B | Sealing Tape, Sheet, or Gasket, Polytetrafluoroethylene, Expanded (EPTFE) Oil and Water Resistant |
| SAE AMS3379 | Sealing Compound, Polysulfide Rubber Preformed Strips for Sealing Removable Doors, Skins, and Panels |
| ASTM F 502 : 2008 | Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces |
| MIL-DTL-14072 Revision F:2013 | Finishes for Ground Based Electronic Equipment |
| MIL-STD-769 Revision K:2015 | Insulation Requirements for U.S. Naval Vessels |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-55041 Revision F:2012 | Switches, Waveguide, General Specification for |
| MIL-DTL-62478 Revision C:2010 | Coupler, Optical |
| P-W-2891 Revision A:2002 | Wipe Solvents, Exempt and Non-Exempt |
| SAE AMS3265E | Sealing Compound, Polysulfide (T) Rubber, Fuel Resistant, Non-Chromated Corrosion Inhibiting For Intermittent Use to 360 °F (182 °C) |
| MIL-PRF-85570 Revision E:2012 | CLEANING COMPOUNDS, AIRCRAFT, EXTERIOR |
| SAE AMS3276F | Sealing Compound, Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C) |
| SAE AMS3102 | Sealing Compound, Polythioether Rubber Fast Curing, Light Weight (Specific Gravity 0.78, max.) for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C) |
| SAE AS5127B | Aerospace Standard Test Methods for Aerospace Sealants Methods for Preparing Aerospace Sealant Test Specimens |
| ASTM F 502 : 2008 : R2013 | Standard Test Method for Effects of Cleaning and Chemical Maintenance Materials on Painted Aircraft Surfaces |
| MIL-PRF-81352 Revision C:2005 | Coatings, Aircraft Touch-Up |
| SAE AS5958F | Fittings, Axially Swaged Tube with Flareless Separable, Fluid System for Operating Pressures up to and Including 5080 psi (35000 kPa), Specification for |
| SAE AMS3100D | Adhesion Promoter For Polysulfide Sealing Compounds |
| MIL-PRF-81975 Revision C:2008 | Couplings, Regulated, Aerial Pressure Refueling Type MA-2, Type MA-3 and Type MA-4 |
| MIL-PRF-7907 Revision C:2007 | Cleaning Compound, Decontaminating (for Soiled and Radioactive Contaminated Surfaces) |
| MIL-PRF-32479 Revision A:2017 | Trailers, Lift - Aircraft and Missile Engine |
| MIL-PRF-26139 Revision E:2015 | Tester, Pressurized Cabin Leakage, Aircraft, (AF/M24T-3 and AF/M32T-1) |
| SAE MA2114B | Adapter - Port Connection, Ring Locked Installation and Removal of |
| MIL-PRF-85285 Revision E:2012 | Topcoat, Aircraft and Support Equipment |
| MIL-DTL-32459 Base Document:2013 | Coatings, Anodic for Magnesium and Magnesium Alloys |
| MIL-PRF-32090 Revision A:2016 | Delivery System, Aerial, Bulk Fuel |
| MIL-DTL-18264 Revision E:2015 | Finishes, Organic, Weapons Systems, Application and Control of |
| SAE AMS3277J | Sealing Compound, Polythioether Rubber Fast Curing for Integral Fuel Tanks and General Purpose, Intermittent Use to 360 °F (182 °C) |
| SAE AS5551B | Fitting Assembly - 24° Cone Flareless per AS5827, 5080 psi, Port Connection, Port Preparation, Installation and Removal of AS5550 and AS5865 |
| NASA STD 5020 : 2012 | REQUIREMENTS FOR THREADED FASTENING SYSTEMS IN SPACEFLIGHT HARDWARE |
| NASA MSFC HDBK 3697 : 2014 | ELECTRICAL BONDING DESIGN GUIDE HANDBOOK |
| MIL-STD-186 Revision F:2002 | Manufacturing Process Protective Finishingfor Army Missile Weapon Systems |
| MIL-STD-3035 Base Document:2013 | USAF Aircraft Arresting Systems (Design Criteria) |
| MIL-PRF-32390 Base Document:2011 | Engaging Device, Aircraft Arresting System - USAF Pendant Cable Retraction Systems (PCRS) |
| SAE AS1301F | Adapters - Port Connection, Ring Locked Design, Installation and Removal of |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| MIL-STD-7179 Revision A:2009 | Finishes, Coatings, and Sealants, for the Protection of Aerospace Weapons Systems and Support Equipment |
| MIL-PRF-83323 Revision D:2016 | Tester, Universal Receptacle, Aerial Refueling |
| MIL-DTL-32392 Revision A:2013 | Aircraft Arresting System - Textile (TAAS) |
| MIL-STD-171 Revision F:2011 | Finishing of Metal and Wood Surfaces |
| SAE AMS3281F | Sealing Compound, Polysulfide (T) Synthetic Rubber for Integral Fuel Tank and Fuel Cell Cavities Low Density for Intermittent Use to 360 °F (182 °C) |
| MIL-STD-2161 Revision C:2014 | Paint Schemes and Exterior Markings for U.S. Navy and Marine Corps Aircraft |
| MIL-DTL-64159 Revision B:2011 | Camouflage Coating, Water Dispersible Chemical Agent Resistant |
| SAE AS5127/1C | Aerospace Standard Test Methods for Aerospace Sealants Two-Component Synthetic Rubber Compounds |
| SAE AMS3603A | Protective Film, High Performance, Polymeric Pressure Sensitive Adhesive, for Aircraft Exterior Applications |
| MIL-PRF-81733 Revision D:1998 | Sealing and Coating Compound, Corrosion Inhibitive |
| MIL-DTL-55288 Revision E:2012 | Antenna AS-1729/VRC |
| MIL-DTL-81706 Revision B:2004 | Chemical Conversion Materials for Coating Aluminum and Aluminum Alloys |
| SAE AMSS8802D | Sealing Compound, Fuel Resistant, Integral Fuel Tanks and Fuel Cell Cavities |
| SAE AMS2473H | Chemical Film Treatment for Aluminum Alloys General Purpose Coating |
| MIL-DTL-53039 Revision E:2013 | Camouflage Coating, Solvent Based, Chemical Agent Resistant |
| MIL-PRF-32587 Base Document:2018 | Remover, Paint, Hap-Free, Neutral |
| MIL-PRF-32470 Base Document:2013 | Truck, Forklift, 10,000 Lb Capacity, Variable Reach, Rough Terrain |
| MIL-PRF-87937 Revision D:2001 | Cleaning Compound, Aerospace Equipment |
| SAE AMS3284C | Sealing Compound, Low Adhesion, for Removable Panels and Fuel Tank Inspection Plates |
| SAE AMS3144 | Primer, Anodic Electrodeposition for Aircraft Applications |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| SAE ARP4118A | Isolation and Corrosion Protection of Dissimilar Materials, Carbon Composite Structure Repair |
| SAE AMS3092A | Release Agent, for Use During Form-In-Place Gasket Preparation |
| SAE AMS3379A | Sealing Compound, Polysulfide Rubber Performed Strips for Sealing Removable Doors, Skins, and Panels |
| TT-C-490 Revision H:2021 | Chemical Conversion Coatings and Pretreatments for Metallic Substrates (Base for Organic Coatings) |
| SAE AMS1640B | Corrosion Removing Compound For Aircraft Surfaces |
| ASTM D 823 : 1995 | Standard Practices for Producing Films of Uniform Thickness of Paint, Varnish, and Related Products on Test Panels |
| ASTM D 5895 : 2013 : REDLINE | Standard Test Methods for Evaluating Drying or Curing During Film Formation of Organic Coatings Using Mechanical Recorders |
| MIL-PRF-85285 Revision E:2012 | Topcoat, Aircraft and Support Equipment |
| SAE AMSQQA250/4B | Aluminum Alloy 2024, Plate and Sheet |
| ASTM D 1200 : 2010 | Standard Test Method for Viscosity by Ford Viscosity Cup |
| MIL-DTL-5541 Revision F:2006 | Chemical Conversion Coatings on Aluminum and Aluminum Alloys |
| TT-R-2918 Revision A:2001 | Remover, Paint, No Hazardous Air Pollutants (HAPS) |
| MIL-C-8514 Revision C:1967 | Coating Compound, Metal Retreatment, Resin-Acid (ASG) |
| MIL-R-81294 Revision D:1990 | Remover, Paint, Epoxy, Polysulfide, and Polyurethane Systems |
| MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
| SAE AMSQQA250/5B | Aluminum Alloy Alclad 2024, Plate and Sheet |
| MIL A 8625 : F | ANODIC COATINGS FOR ALUMINUM AND ALUMINUM ALLOYS |
| MIL T 81772 : B | THINNER, AIRCRAFT COATING |
| MIL-PRF-83282 Revision D:1997 | Hydraulic Fluid, Fire Resistant, Synthetic Hydrocarbon Base, Metric, NATO Code Number H-537 |
| FED-STD-595 Revision C:2008 | Colors Used in Government Procurement (S/S By SAE-AMS-STD-595) |
| ASTM D 3359 : 2017 : REDLINE | Standard Test Methods for Rating Adhesion by Tape Test |
Summarise
Access your standards online with a subscription
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.
Important note : Users cannot be edited or removed once added to your Multi user PDF.