![header thumbnail](/images/img-default-logo.png)
MIL-STD-1629 Revision A:1980
Withdrawn
A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.
![header thumbnail](/images/img-default-logo.png)
PROCEDURES FOR PERFORMING A FAILURE MODE, EFFECTS AND CRITICALITY ANALYSIS
04-08-1998
1 Scope
1.1 Scope
1.2 Application
1.3 Numbering system
1.4 Revisions
1.4.1 Standard
1.4.2 Tasks
1.5 Method of reference
2 Referenced documents
2.1 Issues of documents
3 Definitions
3.1 Terms
3.1.1 Contractor
3.1.2 Corrective action
3.1.3 Compensating provision
3.1.4 Criticality
3.1.5 Criticality analysis (CA)
3.1.6 Severity
3.1.7 Damage effects
3.1.7.1 Primary damage effects
3.1.7.2 Secondary damage effects
3.1.8 Damage mode
3.1.9 Damage mode and effects analysis (DMEA)
3.1.10 Detection mechanism
3.1.11 Environments
3.1.12 Failure cause
3.1.13 Failure effect
3.1.13.1 Local effect
3.1.13.2 Next higher level effect
3.1.13.3 End effect
3.1.14 Failure mode
3.1.15 Failure mode and effects analysis (FMEA)
3.1.16 FMECA-maintainability information
3.1.17 Indenture level
3.1.17.1 Initial indenture levels
3.1.17.2 Other indenture levels
3.1.18 Interfaces
3.1.19 Single failure point
3.1.20 Threat mechanism
3.1.21 Undetectable failure
4 General requirements
4.1 General
4.2 Implementation
4.3 FMECA planning
4.3.1 Worksheet formats
4.3.2 Ground rules and assumptions
4.3.3 Indenture level
4.3.4 Coding system
4.3.5 Failure definition
4.3.6 Coordination of effort
4.4 General procedures
4.4.1 Contributing information
4.4.1.1 Technical specifications and development plans
4.4.1.2 Trade-off study reports
4.4.1.3 Design data and drawings
4.4.1.4 Reliability data
4.4.2 FMEA process
4.4.3 Severity classification
4.5 FMECA report
4.5.1 Summary
4.5.2 Reliability critical item lists
4.5.2.1 Category I and Category II failure mode list
4.5.2.2 Single failure points list
5 Detailed requirements
5.1 Tasks
Tasks
101 Failure mode and effects analysis
102 Criticality analysis
103 FMECA-maintainability information
104 Damage mode and effects analysis
105 Failure mode, effects, and criticality
analysis plan
Figures
Task 101
101.1 Example of a functional block diagram
101.2 Example of a reliability block diagram
101.3 Example of FMEA worksheet format
Task 102
102.1 Example of CA worksheet format
102.2 Example of criticality matrix
Task 103
103.1 Example of FMECA-maintainability information
worksheet format
Task 104
104.1 Example of damage mode and effects analysis
format
Appendix A. Application and tailoring guide
Paragraph
10 General
10.1 Scope
10.2 Tailoring requirements
10.3 Duplication of effort
20 Referenced documents (not applicable)
30 Definitions (not applicable)
40 General requirements
40.1 Ordering data
40.2 Data item descriptions (DID)
50 Application criteria
50.1 General considerations
50.1.1 Level of detail
50.1.2 Timing
50.1.3 Intended use
50.2 FMEA (task 101)
50.3 CA (task 102)
50.4 FMECA-maintainability information (task 103)
50.5 DMEA (task 104)
50.6 Criticality number (Cr) calculation example
Provides for performing failure mode, effects, and criticality analysis to evaluate and document potential impact of each hardware or functional failure on mission success, system and personnel safety, system performance, maintainability and maintenance requirements. Coverage includes definitions, worksheep formats, indenture level, coding system, reliability data, and technical specifications and development plans.
DocumentType |
Standard
|
Pages |
73
|
PublisherName |
US Military Specs/Standards/Handbooks
|
Status |
Withdrawn
|
Supersedes |
SAE ARP 5796 : 2013 | FLIGHT CRITICAL CONTROL VALVES, MILITARY AIRCRAFT |
DD CEN ISO/TS 22367:2010 | Medical laboratories. Reduction of error through risk management and continual improvement |
I.S. EN ISO 5840:2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
15/30324519 DC : 0 | BS EN ISO 14224 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
ISO 15198:2004 | Clinical laboratory medicine — In vitro diagnostic medical devices — Validation of user quality control procedures by the manufacturer |
GEIA TA HB 0009 : 2013 | RELIABILITY PROGRAM HANDBOOK |
MIL-HDBK-2084 Base Document:1995 | General Requirements for Maintainability of Avionic and electronic Systems and Equipment |
MIL STD 470 : B | MAINTAINABILITY PROGRAM REQUIREMENTS (FOR SYSTEMS AND EQUIPMENTS) |
MIL-R-2729 Revision D:1992 | REGULATOR EXCITER SYSTEMS, VOLTAGE, A.C. GENERATOR, NAVAL SHIPBOARD USE |
DEFSTAN 02-45/2(2000) : 2000 | REQUIREMENTS FOR THE APPLICATION OF RELIABILITY-CENTRED MAINTENANCE TECHNIQUES TO HM SHIPS, SUBMARINES, ROYAL FLEET AUXILIARIES AND OTHER NAVAL AUXILIARY VESSELS |
MIL-I-85071 Revision A:1992 | INVERTERS, AIRCRAFT, DC TO AC, GENERAL SPECIFICATION FOR |
17/30337986 DC : 0 | BS EN ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
MIL-HDBK-470 Revision A:1997 | DESIGNING AND DEVELOPING MAINTAINABLE PRODUCTS AND SYSTEMS - VOLUME 1 |
MIL-F-24638 Base Document:1984 | FREQUENCY CHANGER, SOLID STATE, AIR COOLED (NAVAL SHIPBOARD) |
MIL-STD-2069 Base Document:1961 | REQUIREMENTS FOR AIRCRAFT NONNUCLEAR SURVIVABILITY PROGRAM |
IEEE 1887-2017 | IEEE Guide for Wayside Energy Storage Systems for DC Traction Applications |
MIL-HDBK-2069 Base Document:1997 | AIRCRAFT SURVIVABILITY |
MIL STD 2080 : 0 | MAINTENANCE ENGINEERING, PLANNING AND ANALYSIS FOR AERONAUTICAL SYSTEMS, SUBSYSTEMS, EQUIPMENT AND SUPPORT EQUIPMENT |
ARINC 655 : 1999 | REMOTE DATA CONCENTRATOR (RDC) GENERIC DESCRIPTION |
BS EN ISO 20815:2010 | Petroleum, petrochemical and natural gas industries. Production assurance and reliability management |
DEFSTAN 00-970(PT0)/9(2012) : 2012 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/14(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/7(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/11(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/13(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/12(2014) : 2014 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/8(2011) : 2011 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
DEFSTAN 00-970(PT0)/10(2013) : 2013 | DESIGN AND AIRWORTHINESS REQUIREMENTS FOR SERVICE AIRCRAFT - PART 0: PROCEDURES FOR USE, CONTENT AND DEFINITIONS |
MIL-C-85521 Base Document:1983 | Concentrator, Oxygen, GGU-7/A |
MIL-STD-2097 Revision A:1989 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
15/30274589 DC : 0 | BS EN ISO 17776 - PETROLEUM AND NATURAL GAS INDUSTRIES - OFFSHORE PRODUCTION INSTALLATIONS - MAJOR ACCIDENT HAZARD MANAGEMENT DURING THE DESIGN OF NEW INSTALLATIONS |
MIL E 17807 : C | ELEVATOR, WEAPON AND CARGO, ELECTROMECHANICAL (SHIPBOARD) |
PREN 16991 : DRAFT 2016 | RISK BASED INSPECTION FRAMEWORK (RBIF) |
IEEE 1413.1 : 2002 | SELECTING AND USING RELIABILITY PREDICTIONS BASED ON IEEE 1413 |
03/103026 DC : DRAFT JAN 2003 | BS EN ISO 5840 - CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
AAMI ISO 5840 : 2005 : R2010 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
AAMI ISO 5840 :2005 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
MIL-F-24713 Base Document:1989 | FREQUENCY CHANGER, STATIC, AIR COOLED (NAVAL SHIPBOARD) |
MIL-HDBK-2097 Revision A:1997 | ACQUISITION OF SUPPORT EQUIPMENT AND ASSOCIATED INTEGRATED LOGISTICS SUPPORT |
MIL-HDBK-87244 Base Document:1995 | AVIONICS/ELECTRONICS INTEGRITY |
CSA 1.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
I.S. EN ISO 14224:2016 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT (ISO 14224:2016) |
VDI 4007:2012-06 | Reliability goals - Determination, check, review, certificate |
BS ISO 15198:2004 | Clinical laboratory medicine. In vitro diagnostic medical devices. Validation of user quality control procedures by the manufacturer |
PD IEC/TR 62987:2015 | Nuclear power plants. Instrumentation and control systems important to safety. Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems |
DEFSTAN 02-357(PT3)/1(2003) : 2003 | REQUIREMENTS FOR GASEOUS FIREFIGHTING SYSTEMS FOR MAIN MACHINERY SPACES AND COMPARTMENTS OF SURFACE SHIPS - PART 3: BCF (HALON 1211) SYSTEM |
ISO 20815:2008 | Petroleum, petrochemical and natural gas industries Production assurance and reliability management |
DEFSTAN 00-56/1(1991) : 1991 | HAZARD ANALYSIS AND SAFETY CLASSIFICATION OF THE COMPUTER AND PROGRAMMABLE ELECTRONIC SYSTEM ELEMENTS OF DEFENCE EQUIPMENT |
MIL-HDBK-1799 Base Document:1997 | SURVIVABILITY, AERONAUTICAL SYSTEMS (FOR COMBAT MISSION EFFECTIVENESS) |
IEEE 1633-2016 REDLINE | IEEE Recommended Practice on Software Reliability |
MIL-STD-1635 Base Document:1973 | RELIABILITY GROWTH TESTING |
MIL-STD-1388-2 Revision B:1991 | DOD REQUIREMENTS FOR A LOGISTIC SUPPORT ANALYSIS RECORD |
SR TSY 001171 : ISSUE 1 | METHODS AND PROCEDURES FOR SYSTEM RELIABILITY ANALYSIS |
MIL E 24021 : J NOTICE 1 | ELECTRIC POWER MONITORS, EXTERNAL, AIRCRAFT |
NASA HDBK 8739.19-2 : 2010 | MEASURING AND TEST EQUIPMENT SPECIFICATIONS - NASA MEASUREMENT QUALITY ASSURANCE HANDBOOK - ANNEX 2 |
MIL-C-85248 Revision A:1984 | CAMERA, STILL PICTURE, PANORAMIC, KA-99A |
IEEE DRAFT C37.231 : D14B 2006 | MICROPROCESSOR-BASED PROTECTION EQUIPMENT FIRMWARE CONTROL |
DEFSTAN 00-56(PT2)/2(1996) : 1996 | SAFETY MANAGEMENT REQUIREMENTS FOR DEFENCE SYSTEMS - PART 2: GUIDANCE |
IEEE 352-1987 | IEEE Guide for General Principles of Reliability Analysis of Nuclear Power Generating Station Safety Systems |
MIL-STD-1543 Revision B:1988 | RELIABILITY PROGRAM REQUIREMENTS FOR SPACE AND LAUNCH VEHICLES |
DEFSTAN 00-41/3(1993) : 1993 | RELIABILITY AND MAINTAINABILITY MOD GUIDE TO PRACTICES AND PROCEDURES |
ARINC 628-6 : 2002 | CABIN EQUIPMENT INTERFACES - PART 6: FIBER OPTIC CABLE ASSEMBLY GENERAL SPECIFICATION |
SAE ARP 5580 : 2012 | RECOMMENDED FAILURE MODES AND EFFECTS ANALYSIS (FMEA) PRACTICES FOR NON-AUTOMOBILE APPLICATIONS |
SAE AIR 6027 : 2017 | CONSIDERATIONS FOR SAFE STORE OPERATION ON MANNED AND UNMANNED VEHICLES |
SAE AS 6171 : 2016 | TEST METHODS STANDARD; GENERAL REQUIREMENTS, SUSPECT/COUNTERFEIT, ELECTRICAL, ELECTRONIC, AND ELECTROMECHANICAL PARTS |
I.S. EN ISO 20815:2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
ISO 5840:2005 | Cardiovascular implants Cardiac valve prostheses |
ISO 14224:2016 | Petroleum, petrochemical and natural gas industries Collection and exchange of reliability and maintenance data for equipment |
UNI EN ISO 5840 : 2009 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
16/30337806 DC : 0 | BS EN 16991 - RISK BASED INSPECTION FRAMEWORK (RBIF) |
06/30109242 DC : DRAFT SEP 2006 | ISO 20815 - PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
IEEE 1827-2016 | IEEE Guide for Electrical and Control Design of Hydroelectric Water Conveyance Facilities |
MIL-HDBK-472 Base Document:1966 | MAINTAINABILITY PREDICTION |
MIL-E-85583 Revision A:1987 | ELECTRIC POWER GENERATING CHANNEL, VARIABLE INPUT SPEED, ALTERNATING CURRENT, 400 HZ, AIRCRAFT, GENERAL SPECIFICATION FOR |
MIL-HDBK-515 Base Document:2002 | WEAPON SYSTEM INTEGRITY GUIDE (WSIG) |
DD ISO/TS 22367 : 2008 | MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT |
MIL STD 1843 : 0 | RELIABILITY-CENTERED MAINTENANCE FOR AIRCRAFT, ENGINES AND EQUIPMENT |
MIL-P-85573 Base Document:1983 | POWER UNIT AIRCRAFT AUXILIARY, GAS TURBINE, GENERAL SPECIFICATION FOR |
UNI EN ISO 20815 : 2010 | PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - PRODUCTION ASSURANCE AND RELIABILITY MANAGEMENT |
S.R. CWA 15740:2008 | RISK-BASED INSPECTION AND MAINTENANCE PROCEDURES FOR EUROPEAN INDUSTRY (RIMAP) |
EN ISO 20815:2010 | Petroleum, petrochemical and natural gas industries - Production assurance and reliability management (ISO 20815:2008, Corrected version 2009-06-15) |
BS EN ISO 17776:2016 | Petroleum and natural gas industries. Offshore production installations. Major Accident hazard management during the design of new installations |
ISO 17776:2016 | Petroleum and natural gas industries Offshore production installations Major accident hazard management during the design of new installations |
BS EN ISO 5840:2009 | Cardiovascular implants. Cardiac valve prostheses |
EN ISO 17776:2016 | Petroleum and natural gas industries - Offshore production installations - Major Accident hazard management during the design of new installations (ISO 17776:2016) |
API TR 17TR3 : 2004 | AN EVALUATION OF THE RISKS AND BENEFITS OF PENETRATIONS IN SUBSEA WELLHEADS BELOW THE BOP STACK |
04/30066208 DC : DRAFT DEC 2004 | ISO 14224 - PETROLEUM AND NATURAL GAS INDUSTRIES - COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
SAE ARP 4729 : 2017 | DOCUMENT FOR 270 VOLTAGE DIRECT CURRENT (270 V DC) SYSTEM |
IEC TR 62987:2015 | Nuclear power plants - Instrumentation and control systems important to safety - Use of Failure Mode and Effects Analysis (FMEA) and related methods to support the justification of systems |
SAE JA 6097 : 2013 | USING A SYSTEM RELIABILITY MODEL TO OPTIMIZE MAINTENANCE COSTS A BEST PRACTICES GUIDE |
MIL-C-23952 Revision C:1992 | CONTROL EQUIPMENT AUTOMATIC DEGAUSSING (AUTO DEG), TYPE SSM |
MIL-STD-1388-1 Revision A:1983 | LOGISTIC SUPPORT ANALYSIS |
MIL-D-18300 Revision H:1993 | DESIGN EXAMINATIONS, ENGINEERING AVIONIC SYSTEMS/EQUIPMENT GENERAL REQUIREMENTS FOR |
SAE ARP 926 : 2018 | FAULT/FAILURE ANALYSIS PROCEDURE |
S.R. CEN ISO TS 22367:2010 | MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT |
MIL STD 2084 : 0 | GENERAL REQUIREMENTS FOR MAINTAINABILITY OF AVIONIC AND ELECTRONIC SYSTEMS AND EQUIPMENT |
DEFSTAN 00-41(PT6)/1(1989) : 1989 | MOD PRACTICES AND PROCEDURES FOR RELIABILITY AND MAINTAINABILITY - PART 6: MAINTAINABILITY |
MIL-E-22437 Revision E:1981 | EQUIPMENT, DEGAUSSING FOR MCM SHIPS |
MIL-STD-2173 Base Document:1986 | RELIABILITY-CENTERED MAINTENANCE REQUIREMENTS FOR NAVAL AIRCRAFT, WEAPONS SYSTEMS AND SUPPORT EQUIPMENT |
MIL C 7115 : F | CONVERTER, AIRCRAFT, GENERAL SPECIFICATION FOR |
UNI CEN ISO/TS 22367 : 2010 | MEDICAL LABORATORIES - REDUCTION OF ERROR THROUGH RISK MANAGEMENT AND CONTINUAL IMPROVEMENT |
MIL-P-85576 Revision B:1987 | POWER SUPPLY PP-2581C/A |
MIL-STD-1390 Revision D:1993 | LEVEL OF REPAIR ANALYSIS (LORA) |
API 689 : 2007 | COLLECTION AND EXCHANGE OF RELIABILITY AND MAINTENANCE DATA FOR EQUIPMENT |
IEEE C37.231-2006 | IEEE Recommended Practice for Microprocessor-Based Protection Equipment Firmware Control |
ISO/TS 22367:2008 | Medical laboratories Reduction of error through risk management and continual improvement |
BS EN ISO 14224:2016 | Petroleum, petrochemical and natural gas industries. Collection and exchange of reliability and maintenance data for equipment |
DIN EN ISO 5840:2009-08 | CARDIOVASCULAR IMPLANTS - CARDIAC VALVE PROSTHESES |
CEN ISO/TS 22367:2010 | Medical laboratories - Reduction of error through risk management and continual improvement (ISO/TS 22367:2008, including Cor 1:2009) |
EN ISO 5840:2009 | Cardiovascular implants - Cardiac valve prostheses (ISO 5840:2005) |
CSA/ANSI Z21.1 : 2016 | HOUSEHOLD COOKING GAS APPLIANCES |
MIL-STD-280 Revision A:1969 | DEFINITIONS OF ITEM LEVELS, ITEM EXCHANGEABILITY, MODELS, AND RELATED TERMS |
MIL-STD-756 Revision B:1981 | RELIABILITY MODELING AND PREDICTION |
MIL STD 470 : B | MAINTAINABILITY PROGRAM REQUIREMENTS (FOR SYSTEMS AND EQUIPMENTS) |
MIL-STD-2072 Base Document:1977 | SURVIVABILITY, AIRCRAFT, ESTABLISHMENT AND CONDUCT OF PROGRAMS FOR |
MIL-STD-1591 Base Document:1977 | ON AIRCRAFT, FAULT DIAGNOSIS, SUBSYSTEMS, ANALYSIS SYNTHESIS OF |
MIL STD 2080 : 0 | MAINTENANCE ENGINEERING, PLANNING AND ANALYSIS FOR AERONAUTICAL SYSTEMS, SUBSYSTEMS, EQUIPMENT AND SUPPORT EQUIPMENT |
MIL-HDBK-217 Revision F:1991 | RELIABILITY PREDICTION OF ELECTRONIC EQUIPMENT |
MIL-STD-882 Revision E:2012 | System Safety |
MIL-STD-780 Revision G:1992 | WORK UNIT CODES FOR AERONAUTICAL EQUIPMENT, UNIFORM NUMBERING SYSTEM |
MIL-STD-721 Revision C:1981 | DEFINITIONS OF EFFECTIVENESS TERMS FOR RELIABILITY MAINTAINABILITY, HUMAN FACTORS, AND SAFETY |
MIL-STD-785 Revision B:1980 | RELIABILITY PROGRAM FOR SYSTEMS AND EQUIPMENT DEVELOPMENT AND PRODUCTION |
Please Login or Create an Account so you can add users to your Multi user PDF Later.
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.