NF EN 61076 4 100 : 2002
Current
The latest, up-to-date edition.
CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES
12-01-2013
AVANT-PROPOS
1 Données générales
1.1 Méthode recommandée pour le montage
1.2 Caractéristiques et conditions nominales de
fonctionnement
1.3 Références normatives
1.4 Marquage
1.5 Désignation de type CEI
1.6 Références pour les commandes
2 Données techniques
2.1 Définitions
2.2 Tableau des modèles et des variantes
2.3 Renseignements sur l'application
2.4 Dispositions des contacts
3 Renseignements concernant les dimensions
3.1 Généralités
3.2 Vue isométrique et caractéristiques communes
3.3 Renseignements concernant l'accouplement
3.4 Embases
3.5 Fiches
3.6 Accessoires
3.7 Renseignements sur le montage des embases
3.8 Renseignements sur le montage des fiches
3.9 Calibres
4 Caractéristiques
4.1 Catégorie climatique
4.2 Caractéristiques électriques
4.3 Caractéristiques mécaniques
5 Programme d'essais
5.1 Généralités
5.2 Tableaux de programmes d'essai
6 Procédures de controle de la qualité
6.1 Essais d'homologation
6.2 Controle de conformité de la qualité
6.3 Livraison retardée, nouveau controle
Annexe A (normative) - Structures mécaniques
Annexe ZA (normative) - Références normatives à d'autres
publications internationales avec
les publications européennes
correspondantes
Le présent document décrit les caractéristiques mécaniques, électriques, le programme d'essais et le controle qualité des connecteurs pour les modules de connecteurs en deux parties pour cartes imprimées.
| DevelopmentNote |
Indice de Classement: C93-406-4-100 (10/2002)
|
| DocumentType |
Standard
|
| PublisherName |
Association Francaise de Normalisation
|
| Status |
Current
|
| Standards | Relationship |
| IEC 61076-4-100:2001 | Identical |
| EN 61076-4-100:2001 | Identical |
| NF EN 50377-11-1 : 2008 | CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C |
| IEC 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| EN 60917-2-2:1996 | Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units |
| NF EN 60352-1 : 1998 | SOLDERLESS CONNECTIONS - PART 1: WRAPPED CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE |
| IEC 60068-1:2013 | Environmental testing - Part 1: General and guidance |
| HD 625.1 : 200S1 | INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS |
| EN 61076-4:1996 | Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
| EN 61076-1:2006 | Connectors for electronic equipment - Product requirements - Part 1: Generic specification |
| IEC 60352-1:1997 | Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance |
| IEC 60410:1973 | Sampling plans and procedures for inspection by attributes |
| EN 60352-5:2012/AC:2014 | SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012) |
| IEC 60352-5:2012 | Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance |
| NF EN 60068-1 : 2014 | ENVIRONMENTAL TESTING - PART 1: GENERAL AND GUIDANCE |
| IEC 61076-4:1995 | Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors |
| IEC 61076-4-102:1997 | Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917 |
| IEC 60917-2-2:1994 | Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units |
| NF EN 61076 4 102 : 1998 | CONNECTORS WITH ASSESSED QUALITY FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTERING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917 |
| HD 493.3 : 200S2 | DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482.6 MM (19 IN) SERIES - SUBRACKS AND ASSOCIATED PLUG-IN UNITS |
| IEC 60326-3:1991 | Printed boards - Part 3: Design and use of printed boards |
| IEC 60664-1:2007 | Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.