EN 61076-4-100:2001

Current

Current The latest, up-to-date edition.

Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes

Available format(s):

Language(s):

Published date: 12-12-2001

Publisher: European Committee for Standards - Electrical

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

1 General data
  1.1 Recommended method of mounting
  1.2 Ratings and characteristics
  1.3 Normative references
  1.4 Marking
  1.5 IEC type designation
  1.6 Ordering information
2 Technical information
  2.1 Definitions
      2.1.1 Backplane male contact arrangement
  2.2 Survey of styles and variants
  2.3 Information on application
      2.3.1 Complete connectors (pairs)
      2.3.2 Fixed board connectors
      2.3.3 Free board connectors
      2.3.4 Accessories
      2.3.5 Shielding/grounding
      2.3.6 Basic type of termination
  2.4 Contact arrangements
      2.4.1 Fixed board connectors
      2.4.2 Free board connectors
3 Dimensional information
  3.1 General
  3.2 Isometric view and common features
      3.2.1 Common features
      3.2.2 Reference system
      3.2.3 Height dimensions
      3.2.4 Width dimensions
      3.2.5 Depth dimensions
  3.3 Engagement (mating) information
      3.3.1 Electrical engagement length
      3.3.2 Inclination
      3.3.3 Planarity
  3.4 Fixed board connectors
      3.4.1 Dimensions
      3.4.2 Terminations
  3.5 Free board connectors
      3.5.1 Dimensions
      3.5.2 Terminations
  3.6 Accessories
  3.7 Mounting information for fixed board connectors
      3.7.1 Hole pattern on panels
  3.8 Mounting information for free board connectors
      3.8.1 Hole pattern on printed boards
      3.8.2 Requirements for press-in tools
  3.9 Gauges
      3.9.1 Sizing gauges and retention force gauges
4 Characteristics
  4.1 Climatic category
  4.2 Electrical
      4.2.1 Creepage and clearance distances
      4.2.2 Voltage proof (applicable for PL1, 2, 3)
      4.2.3 Current-carrying capacity (applicable for PL1,
            2, 3)
      4.2.4 Contact resistance
      4.2.5 Initial resistance
  4.3 Mechanical
      4.3.1 Mechanical operation
      4.3.2 Insertion and withdrawal forces
      4.3.3 Contact retention in insert
      4.3.4 Static load, axial
      4.3.5 Vibrations (sinusoidal)
5 Test schedule
  5.1 General
      5.1.1 Arrangement for contact resistance measurement
      5.1.2 Arrangement for dynamic stress tests
      5.1.3 Arrangement for testing static load, axial
      5.1.4 Wiring arrangement for insulation resistance,
            voltage proof and polarization voltage during
            damp heat test
      5.1.5 Arrangement for flammability test
      5.1.6 Arrangement for measurement of the press-in
            connections (female connector)
      5.1.7 Planarity of mounted connectors
      5.1.8 Test board for fixed and free board connectors
  5.2 Test schedule tables
      5.2.1 Preliminary Group P
      5.2.2 Group AP - Dynamic/climatic
      5.2.3 Group BP - Mechanical endurance
      5.2.4 Group CP - Moisture
      5.2.5 Group DP - Electrical load
      5.2.6 Group EP - Mechanical resistivity
      5.2.7 Group FP - Chemical fluids
      5.2.8 Group GP - Connections
6 Quality assessment procedures
  6.1 Qualification approval testing
      6.1.1 Method 1
      6.1.2 Method 2
  6.2 Quality conformance inspection
      6.2.1 Lot-by-lot tests
      6.2.2 Periodic tests
  6.3 Delayed delivery, re-inspection
Annex A (normative) Mechanical structures
Annex ZA (normative) Normative references to international
                     publications with their corresponding
                     European publications

Abstract - (Show below) - (Hide below)

This publication also bears the number QC 480301XX0001 which is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ).

General Product Information - (Show below) - (Hide below)

Committee	CLC/SR 48B
Development Note	To be read in conjunction with EN 61076-1:1995 (05/2001) Supersedes UNE EN 61076-4-100. (07/2012)
Document Type	Standard
ISBN
Pages
Published
Publisher	European Committee for Standards - Electrical
Status	Current

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
SN EN 61076-4-100 : 1998	Identical
I.S. EN 61076-4-100:2002	Identical
DIN EN 61076-4-100:2002-10	Identical
PN EN 61076-4-100 : 2002	Identical
CEI EN 61076-4-100 : 2003	Identical
BS EN 61076-4-100:2002 (published 2002-01)	Identical
IEC 61076-4-100:2001	Identical
NEN EN IEC 61076-4-100 : 2002	Identical
NF EN 61076 4 100 : 2002	Identical
NBN EN 61076 4-100 : 2002	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

BS EN 60917-2-3:2006	MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES - PART 2-3: SECTIONAL SPECIFICATION - INTERFACE CO-ORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE - EXTENDED DETAIL SPECIFICATION - DIMENSIONS FOR SUBRACKS, CHASSIS, BACKPLANES, FRONT PANELS AND PLUG-IN UNITS
I.S. EN 61076-4-111:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS WITH ASSESSED QUALIFY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
CEI EN 61076-4-111 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-111: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 61076-4-103:1999	CONNECTORS FOR USE IN D.C. LOW-FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2.5 MM
EN 61076-4-108:2002	Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 60917-2-3 : 2006	Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Extended detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units
EN 61076-4-103:1999	Connectors for use in d.c. low-frequency analogue and digital high speed data applications - Part 4-103: Printed board connectors with assessed quality - Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm
EN 50377-11-1:2008	Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 11-1: Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
EN 61076-4-110:2002	Connectors for electronic equipment - Part 4-110: Printed board connectors with assessed quality - Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
CEI EN 61076-4-110 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
BS EN 61076-4-103:1999 (published 1999-06)	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connectors with shielding and a basic grid of 2,5 mm - Cable to board connectors, shielded against EMC ,grid 2,5 mm,for high speed data rates,for use with printed boards
BS EN 50377-11-1:2008	Connector sets and interconnect components to be used in optical fibre communication systems. Product specifications Type MF terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre for category C
CEI EN 61076-4-108 : 2003	CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 50377-11-1:2008	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C
CEI EN 60917-2-3 : 2007	MODULAR ORDER FOR THE DEVELOPMENT OF MECHANICAL STRUCTURES FOR ELECTRONIC EQUIPMENT PRACTICES - PART 2-3: SECTIONAL SPECIFICATION - INTERFACE CO-ORDINATION DIMENSIONS FOR THE 25 MM EQUIPMENT PRACTICE - EXTENDED DETAIL SPECIFICATION - DIMENSIONS FOR SUBRACKS, CHASSIS, BACKPLANES, FRONT PANELS AND PLUG-IN UNITS
CEI EN 61076-4-103 : 2001	CONNECTORS FOR USE IN D.C. LOW - FREQUENCY ANALOGUE AND DIGITAL HIGH SPEED DATA APPLICATIONS PART 4-103: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH SHIELDING AND A BASIC GRID OF 2,5 MM
BS EN 61076-4-111:2002 (published 2002-08)	Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS EN 61076-4-110:2002 (published 2002-03)	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for latched cable connector system having a basic grid of 2,0 mm including full shielding and latching function
BS EN 61076-4-108:2002	Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
I.S. EN 61076-4-110:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-110: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR LATCHED CABLE CONNECTOR SYSTEM HAVING A BASIC GRID OF 2,0 MM INCLUDING FULL SHIELDING AND LATCHING FUNCTION
CEI EN 50377-11-1 : 2009	CONNECTOR SETS AND INTERCONNECT COMPONENTS TO BE USED IN OPTICAL FIBRE COMMUNICATION SYSTEMS - PRODUCT SPECIFICATIONS - PART 11-1: TYPE MF TERMINATED ON IEC 60793-2-50 CATEGORY B1.1 AND B1.3 SINGLEMODE FIBRE FOR CATEGORY C
I.S. EN 61076-4-108:2002	CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1

Standards Referencing This Book - (Show below) - (Hide below)

IEC 61076-1:2006	Connectors for electronic equipment - Product requirements - Part 1: Generic specification
EN 60917-2-2:1996	Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units
IEC 60068-1:2013	Environmental testing - Part 1: General and guidance
EN 60068-1:2014	Environmental testing - Part 1: General and guidance
HD 625.1 : 200S1	INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PRINCIPLES, REQUIREMENTS AND TESTS
EN 61076-4:1996	Connectors with assessed quality, for use in d.c., low frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
EN 61076-1:2006	Connectors for electronic equipment - Product requirements - Part 1: Generic specification
IEC 60352-1:1997	Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
IEC 60410:1973	Sampling plans and procedures for inspection by attributes
EN 60352-5:2012/AC:2014	SOLDERLESS CONNECTIONS - PART 5: PRESS-IN CONNECTIONS - GENERAL REQUIREMENTS, TEST METHODS AND PRACTICAL GUIDANCE (IEC 60352-5:2012)
IEC 60352-5:2012	Solderless connections - Part 5: Press-in connections - General requirements, test methods and practical guidance
IEC 61076-4:1995	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high-speed data applications - Part 4: Sectional specification - Printed board connectors
IEC 60512-1-100:2012	Connectors for electronic equipment - Tests and measurements - Part 1-100: General - Applicable publications
EN 61076-4-102:1997	Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
IEC 61076-4-102:1997	Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917
IEC 60917-2-2:1994	Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subracks, chassis, backplanes, front panels and plug-in units
EN 60352-1:1997	Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance
HD 493.3 : 200S2	DIMENSIONS OF MECHANICAL STRUCTURES OF THE 482.6 MM (19 IN) SERIES - SUBRACKS AND ASSOCIATED PLUG-IN UNITS
IEC 60326-3:1991	Printed boards - Part 3: Design and use of printed boards
IEC 60664-1:2007	Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart