• There are no items in your cart

IEC 60326-3:1991

Withdrawn

Withdrawn

A Withdrawn Standard is one, which is removed from sale, and its unique number can no longer be used. The Standard can be withdrawn and not replaced, or it can be withdrawn and replaced by a Standard with a different number.

Printed boards - Part 3: Design and use of printed boards

Available format(s)

Hardcopy , PDF , PDF 3 Users , PDF 5 Users , PDF 9 Users

Withdrawn date

31-12-2021

Language(s)

English - French

Published date

07-05-1991

FOREWORD
INTRODUCTION
Clause
1 Scope
2 Normative references
3 Materials and surface finishes
  3.1 Materials
  3.2 Metallic surface finishes
  3.3 Non-metallic surface finishes
4 Assembly
5 Dimensions
  5.1 Datum reference
  5.2 Outline dimensions of printed boards
  5.3 Board thickness
  5.4 Dimensions of holes
  5.5 Dimensions of slots and notches
  5.6 Dimensions of conductors
  5.7 Dimensional stability
6 Electrical characteristics
  6.1 Resistance
  6.2 Current-carrying capacity
  6.3 Insulation resistance
  6.4 Voltage proof
  6.5 Other electrical characteristics
7 Mechanical characteristics
  7.1 Adhesion of the conductive pattern
  7.2 Flatness
8 Miscellaneous
  8.1 Soldering
  8.2 Delamination
  8.3 Flammability
9 Packaging of printed boards
  9.1 General
  9.2 Packaging materials
  9.3 Procedures
Figures
Annex A - Determination of size of access window
          in permanent protective coating

Applicable to printed boards, irrespective of their method of manufacture, when they are ready for the mounting of the components. It is divided into separate parts covering information for the designer, recommendations for the specification writer, test methods and requirements for the various types of printed boards. Contains fundamental information on the design and the application of printed boards, their technical limitations and the features and characteristics which can normally be obtained and expected. It is intended to be used for guidance to the designer and the user of printed boards.

Committee
TC 91
DevelopmentNote
Also numbered as BS 6221-3(1991) (09/2005)
DocumentType
Standard
Pages
109
PublisherName
International Electrotechnical Committee
Status
Withdrawn
Supersedes

Standards Relationship
DIN IEC 60326-3:1993-09 Identical
PN T-80152 : 1994 Identical
NEN 10326-3 : 1985 Identical
CEI 52-21 : 1998 Identical

DIN 41612-7:1985-06 TWO-PART CONNECTORS FOR PRINTED BOARD, GRID 2,54 MM; DIMENSIONS OF TYPES U AND V
BS EN 60603-2:1998 Connectors for frequencies below 3 MHz for use with printed boards Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
NF EN 61076 4 100 : 2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES
BS CECC23400-800(1991) : 1991 AMD 7368 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITHOUT THROUGH-CONNECTIONS
I.S. CECC 75301-802:1995 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS
DIN 41612-8:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS, GRID 2,54 MM; DIMENSIONS OF TYPE M
DIN 41612-2:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES B, C AND D
DIN 41612-9:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRIP 2,54 MM; DIMENSIONS OF TYPE E
BS EN 123200:1992 Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plated through holes
BS 123800:2001 System of quality assessment. Sectional specification. Flexible multilayer printed boards with through-connections
BS 123100:2001 System of quality assessment. Sectional specification. Rigid single-sided and double-sided printed boards with plain holes
03/100395 DC : DRAFT APR 2003 EN 175101-809 - DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
02/202649 DC : DRAFT JAN 2002 IEC PAS 61076-3-111. ED.1 - CONNECTORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-111: DETAIL SPECIFICATION FOR 8-WAY, SHIELDED AND UNSHIELDED, FREE AND FIXED CONNECTORS, FOR INDUSTRIAL ENVIRONMENTS FOR FREQUENCIES UP TO 250 MHZ
DIN 41612-6:1990-06 TWO-PART CONNECTORS FOR PRINTED BOARD; GRID 2,54 MM; DIMENSIONS OF TYPES Q, R AND S
I.S. EN 61076-4-111:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS WITH ASSESSED QUALIFY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
CEI EN 61076-4-111 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-111: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART POWER CONNECTOR MODULES, FOR PRINTED BOARDS AND BACKPLANES HAVING EARLY MATING FEATURES, AND HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 123100:1994 SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES
IEC 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 123600:1996 Sectional Specification: Flex-rigid multilayer printed boards with through connections
EN 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 60127-4:2005/A2:2013 Miniature fuses - Part 4: Universal modular fuse-links (UMF) - Through-hole and surface mount types
EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications - Part 4: Printed board connectors - Section 102: Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
EN 123300 : 1992 AMD 1 1995 SECTIONAL SPECIFICATION: MULTILAYER PRINTED BOARDS
EN 61076-4-113:2003 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
BS EN 61076-4-111:2002 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS EN 61076-4-102:1997 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part single-pole connectors, for multiple uses on plug-in units, with pre-centring, coding and early mating features, having a metric grid in accordance with IEC 60917
BS CECC 23300-800(1990) : AMD 7366 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION; MULTILAYER PRINTED BOARDS
BS CECC23100-800(1990) : AMD 7360 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES
DIN 41612-3:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPES F AND G
BS CECC23300(1989) : 1989 AMD 7364 SPECIFICATION FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: MULTILAYER PRINTED BOARDS
BS EN 61076-4-113:2003 Connectors for electronic equipment Printed board connectors with assessed quality Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
I.S. EN 60603-2:1998 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
I.S. EN 123300:1994 SECTIONAL SPECIFICATION: MULTILAYER PRINTED BOARDS
BS EN 60127-4 : 2005 MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES
I.S. EN 123500:1994 SECTIONAL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS
NF EN 61076 4 113 : 2005 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
BS 123400:2001 System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards without through-connections
14/30312344 DC : 0 PD IEC/PAS 60127-8 - MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION
CEI EN 61076-4-100 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-100: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR TWO-PART CONNECTOR MODULES HAVING A GRID OF 2,5 MM FOR PRINTED BOARDS AND BACKPLANES
BS EN 123500:1992 Specification for harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards with through connections
96/205775 DC : 0 BS CECC 210003 - TECHNOLOGY APPROVAL SCHEDULE FOR PRINTED BOARDS
BS 123600:2001 System of quality assessment. Sectional specification. Flex-rigid multilayer printed boards with through-connections
BS EN 123100:1992 Harmonized system of quality assessment for electronic components: Sectional specification: Single and double sided printed boards with plain holes
CEI EN 61076-4-108 : 2003 CONNECTORS FOR ELECTRONIC EQUIPMENT PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 61076-4-113:2003 CONNECTORS FOR ELECTRONIC EQUIPMENT - PRINTED BOARD CONNECTORS - PART 4-113: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS HAVING 5 ROWS WITH A GRID OF 2,54 MM FOR PRINTED BOARDS AND BACKPLANES IN BUS APPLICATIONS
CECC 75301-802 : 1994 RECTANGULAR CONNECTORS FOR FREQUENCIES BELOW 3 MHZ, TRAPEZOIDAL SHAPED SHELLS AND ROUND CONTACTS 01 MM WITH CRIMP, SOLDER AND PRESS-IN TERMINANONS FOR PRINTED BOARDS
16/30338234 DC : 0 BS EN 60127-8 - MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION
IEC 60326-9:1991 Printed boards - Part 9: Specification for flexible multilayer printed boards with through connections
BS CECC23100(1989) : 1989 AMD 7358 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES
98/230855 DC : DRAFT APRIL 1998 IEC 61076-4-112 - CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C, LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH-SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 112 - DETAIL SPECIFICATION FOR TWO-PART CONNECTORS FOR PRINTED BOARDS FOR BASIC GRID OF 2,00 MM, WITH SQUARE MALE CONTACTS OF 0,50 X 0,50 MM
I.S. EN 61076-4-102:1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
CECC 75101-807 : 1994 MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRIDOF 2.5 mm - ACCORDING TO IEC 917 (DETAIL SPECIFICATION)
IEC 60326-12:1992 Printed boards - Part 12: Specification for mass lamination panels (semi-manufactured multilayer printed boards)
I.S. CECC 75101-807:1994 MODULAR TWO-PART CONNECTORS FOR PRINTED BOARDS AND BACKPLANES, GRID OF 2.5 MM - (ACCORDING TO IEC 917) (DETAIL SPECIFICATION)
EN 175101-809:2004/corrigendum Jun. 2005 DETAIL SPECIFICATION: TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2,54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75 101-801, WITH ASSESSED QUALITY
IEC 61076-4-113:2002 Connectors for electronic equipment - Printed board connectors - Part 4-113: Detail specification for two-part connectors having 5 rows with a grid of 2,54 mm for printed boards and backplanes in bus applications
IEC 60127-4:2005+AMD1:2008+AMD2:2012 CSV Miniature fuses - Part 4: Universal modular fuse-links (UMF) -Through-hole and surface mount types
BS 6221-2:1991 Printed wiring boards Methods of test
BS 123500:2001 System of quality assessment. Sectional specification. Flexible single-sided and double-sided printed boards with through-connections
BS 123700:2001 System of quality assessment. Sectional specification. Flex-rigid double-sided printed boards with through-connections
NF EN 61076 4 102 : 1998 CONNECTORS WITH ASSESSED QUALITY FOR USE IN D.C., LOW-FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS - SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTERING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
BS 123200:2001 System of quality assessment. Sectional specification. Rigid double-sided printed boards with plated-through holes
DIN IEC 60326-4:1993-09 PRINTED BOARDS - PART 4: SPECIFICATION FOR SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES
BS PD ISO/IEC PAS 60127-8 : 2014 MINIATURE FUSES - PART 8: FUSE RESISTORS WITH PARTICULAR OVERCURRENT PROTECTION
BS CECC23500(1990) : 1990 AMD 7369 SPECIFICATION FOR HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS
BS CECC23200(1989) : 1989 AMD 7361 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED THROUGH HOLES
BS EN 123400:1992 Harmonized system of quality assessment for electronic components. Sectional specification: flexible printed boards without through connections
BS CECC23400(1990) : 1990 AMD 7367 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: SECTIONAL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITHOUT THROUGH CONNECTIONS
BS CECC23500-800(1991) : 1991 AMD 7370 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITH THROUGH-CONNECTIONS
BS EN 61076-4-108:2002 Connectors for electronic equipment. Printed board connectors with assessed quality Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
BS CECC23200-800(1990) : AMD 7363 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS: CAPABILITY DETAIL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED-THROUGH HOLES
BS EN 123300:1992 Specification for harmonized system of quality assessment for electronic components. Sectional specification. Multilayer printed boards
IEC 60326-10:1991 Printed boards - Part 10: Specification for flex-rigid double-sided printed boards with through connections
IEC 60326-11:1991 Printed boards - Part 11: Specification for flex-rigid multilayer printed boards with through connections
IEC PAS 61076-3-111:2002 Connectors for electronic equipment - Part 3-111: Detail specification for 8-way, shielded and unshielded, free and fixed connectors, for industrial environments for frequencies up to 250 MHz
IEC 61076-4-100:2001 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
IEC 61076-4-108:2002 Connectors for electronic equipment - Part 4-108: Printed board connectors with assessed quality - Detail specification for cable-to-board connectors, with a modular pitch of 25 mm and integrated shielding function, applicable for transverse packing density of 15 mm, having a basic grid of 2,5 mm in accordance with IEC 60917-1
IEC 61076-4-102:1997 Connectors with assessed quality for use in d.c., low-frequencyanalogue and in digital high speed data applications - Part 4:Printed board connectors - Section 102: Detail specification fortwo-part single-pole connectors, for multiple uses on plug-inunits, with pre-centring, coding and early mating features, havinga metric grid in accordance with IEC 60917
DIN 41612-4:1987-10 TWO-PART CONNECTORS FOR PRINTED BOARDS; GRID 2,54 MM; DIMENSIONS OF TYPE H
BS 123300:2001 System of quality assessment. Sectional specification. Rigid multilayer printed boards
BS EN 175101-802:2000 Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
CEI EN 61076-4-102 : 1998 CONNECTORS WITH ASSESSED QUALITY, FOR USE IN D.C., LOW FREQUENCY ANALOGUE AND IN DIGITAL HIGH SPEED DATA APPLICATIONS - PART 4: PRINTED BOARD CONNECTORS SECTION 102: DETAIL SPECIFICATION FOR TWO-PART SINGLE-POLE CONNECTORS, FOR MULTIPLE USES ON PLUG-IN UNITS, WITH PRE-CENTRING, CODING AND EARLY MATING FEATURES, HAVING A METRIC GRID IN ACCORDANCE WITH IEC 60917
BS EN 175101-809:2004 Harmonized system of quality assessment for electronic components. Detail specification Two-part connectors for printed boards having a grid of 2,54 mm, short version in compliance with CECC 75 101-801, with assessed quality
BS EN 61076-4-100:2002 Connectors with assessed quality, for use in d.c., low-frequency analogue and in digital high speed data applications. Printed board connectors Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
I.S. EN 60127-4:2005 MINIATURE FUSES - PART 4: UNIVERSAL MODULAR FUSE-LINKS (UMF) - THROUGH-HOLE AND SURFACE MOUNT TYPES (IEC 60127-4:2005 (EQV))
I.S. EN 123200:1994 SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED-THROUGH HOLES
I.S. EN 61076-4-108:2002 CONNECTORS FOR ELECTRONIC EQUIPMENT - PART 4-108: PRINTED BOARD CONNECTORS WITH ASSESSED QUALITY - DETAIL SPECIFICATION FOR CABLE-TO-BOARD CONNECTORS, WITH A MODULAR PITCH OF 25 MM AND INTEGRATED SHIELDING FUNCTION, APPLICABLE FOR TRANSVERSE PACKING DENSITY OF 15 MM, HAVING A BASIC GRID OF 2,5 MM IN ACCORDANCE WITH IEC 60917-1
I.S. EN 175101-809:2004 DETAIL SPECIFICATION - TWO-PART CONNECTORS FOR PRINTED BOARDS HAVING A GRID OF 2.54 MM, SHORT VERSION IN COMPLIANCE WITH CECC 75101-801, WITH ASSESSED QUALITY
IEC 60603-2:1995 Connectors for frequencies below 3 MHz for use with printed boards - Part 2: Detail specification for two-part connectors with assessed quality, for printed boards, for basic grid of 2,54 mm (0,1 in) with common mounting features
EN 61076-4-100:2001 Connectors for electronic equipment - Part 4-100: Printed board connectors with assessed quality - Detail specification for two-part connector modules having a grid of 2,5 mm for printed boards and backplanes
EN 60603-2:1998/A1:2005 CONNECTORS FOR FREQUENCIES BELOW 3 MHZ FOR USE WITH PRINTED BOARDS - PART 2: DETAIL SPECIFICATION FOR TWO-PART CONNECTORS WITH ASSESSED QUALITY, FOR PRINTED BOARDS, FOR BASIC GRID OF 2,54 MM (0,1 IN) WITH COMMON MOUNTING FEATURES
EN 175101-802:1999 Detail specification: Two-part connectors for printed boards for high number of contacts with basic grid of 2,54 mm on 3 or 4 rows
EN 61076-4-111:2002 Connectors for electronic equipment - Part 4-111: Printed board connectors with assessed quality - Detail specification for two-part power connector modules, for printed boards and backplanes having early mating features, and having a basic grid of 2,5 mm in accordance with IEC 60917-1
EN 123500:1992/A2:1995 SECTIONAL SPECIFICATION: FLEXIBLE PRINTED BOARDS WITH THROUGH CONNECTIONS
EN 123100 : 1992 AMD 1 1995 SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLAIN HOLES
EN 123200:1992/A1:1995 SECTIONAL SPECIFICATION: SINGLE AND DOUBLE SIDED PRINTED BOARDS WITH PLATED-THROUGH HOLES
EN 123700:1996 Sectional Specification: Flex-rigid double sided printed board with through connections
EN 123800:1996 Sectional Specification: Flexible multilayer printed boards with through connections

IEC 60695-1-1:1999 Fire hazard testing - Part 1-1: Guidance for assessing the fire hazard of electrotechnical products - General guidelines
IEC 60249-2-1:1985 Base materials for printed circuits. Part 2: Specifications. Specification No. 1: Phenolic cellulose paper copper-clad laminated sheet, high electrical quality
IEC 60097:1991 Grid systems for printed circuits
IEC 60194:2015 Printed board design, manufacture and assembly - Terms and definitions

€311.90
Excluding VAT

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.