NFPA 86 : 2015
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
OVENS AND FURNACES
Hardcopy
17-10-2019
English
01-01-2015
Chapter 1 - Administration
Chapter 2 - Referenced Publications
Chapter 3 - Definitions
Chapter 4 - General
Chapter 5 - Location and Construction
Chapter 6 - Furnace Heating Systems
Chapter 7 - Commissioning, Operations, Maintenance,
Inspection, and Testing
Chapter 8 - Safety Equipment and Application
Chapter 9 - Fire Protection
Chapter 10 - Thermal Oxidizer
Chapter 11 - Class A Ovens and Furnaces
Chapter 12 - Class B Ovens and Furnaces
Chapter 13 - Special Atmospheres for Class C Ovens
and Furnaces
Chapter 14 - Class D Furnaces
Annex A - Explanatory Material
Annex B - Example of Class A Furnace Operational and
Maintenance Checklist
Annex C - Example of Class A or Class B Furnace Operational
and Maintenance Checklist
Annex D - The Lower Limit of Flammability and the Autogenous
Ignition Temperature of Certain Common Solvent
Vapors Encountered in Ovens
Annex E - Continuous Solvent Vapor Concentration Indicator
and Controller
Annex F - Steam Extinguishing Systems
Annex G - Example of Class C Furnace Operational and
Maintenance Checklist
Annex H - Vacuum Furnace Maintenance Checklist
Annex I - Pump Data
Annex J - Engineering Data
Annex K - Vacuum Symbols
Annex L - Design Standard References
Annex M - Informational References
Gives the latest comprehensive requirements for the safe design; installation; operation; and inspection, testing, and maintenance of Class A, B, C, and D ovens, dryers, and furnaces; thermal oxidizers; and any other heated enclosure used for processing of materials and related equipment.
DevelopmentNote |
Supersedes NFPA 86C and NFPA 86D. (08/2005)
|
DocumentType |
Standard
|
Pages |
150
|
PublisherName |
National Fire Protection Association
|
Status |
Superseded
|
SupersededBy | |
Supersedes |
NFPA 86C : 1999 | INDUSTRIAL FURNACES USING A SPECIAL PROCESSING ATMOSPHERE |
PD CLC/TR 62685:2011 | Industrial communication networks. Profiles. Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) |
BS ISO 13577-3:2016 | Industrial furnaces and associated processing equipment. Safety Generation and use of protective and reactive atmosphere gases |
BS ISO 12643-3:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Binding and finishing equipment and systems |
ISO 12643-1:2009 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 1: General requirements |
NFPA 513 : 1998 | MOTOR FREIGHT TERMINALS |
BS PD IEC TR 62685 : 2010 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) |
AWS BRH:2007 | BRAZING HANDBOOK |
ASTM D 5327 : 1997 : R2007 | Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions |
CSA C293.2 : 2017 | STANDARD FOR SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - APPLICATION GUIDE FOR DESIGN, INSTALLATION, TESTING, COMMISSIONING, AND MAINTENANCE |
NFPA 61B : 1989 | PREVENTION OF FIRES AND EXPLOSIONS IN GRAIN ELEVATORS AND FACILITIES HANDLING BULK RAW AGRICULTURAL COMMODITIES |
ASTM D 3529 : 2016 | Standard Test Methods for Constituent Content of Composite Prepreg |
ASTM D 3530/D3530M : 1997 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
ASTM D 5009 : 20021 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
NFPA 30A : 2018 | MOTOR FUEL DISPENSING FACILITIES AND REPAIR GARAGES |
NFPA 33 : 2018 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
NFPA 35 : 2016 | MANUFACTURE OF ORGANIC COATINGS |
NFPA 31 : 2016 | INSTALLATION OF OIL-BURNING EQUIPMENT |
NFPA 87 : 2018 | FLUID HEATERS |
NFPA 54 : 2018 | NATIONAL FUEL GAS CODE |
NFPA 400 : 2016 | HAZARDOUS MATERIALS CODE |
NFPA 34 : 2018 | DIPPING, COATING, AND PRINTING PROCESSES USING FLAMMABLE OR COMBUSTIBLE LIQUIDS |
NFPA 850 : 2015 | FIRE PROTECTION FOR ELECTRIC GENERATING PLANTS AND HIGH VOLTAGE DIRECT CURRENT CONVERTER STATIONS |
EN 12753:2005+A1:2010 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements |
IEEE 844.2/CSA C293.2-2017 | IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures--Application Guide for Design, Installation, Testing, Commissioning, and Maintenance |
ANSI Z223.1 : 2018 | NATIONAL FUEL GAS CODE |
ASTM D 3530M : 1997 : R2008 : EDT 1 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
NFPA 86D : 1999 | INDUSTRIAL FURNACES USING VACUUM AS AN ATMOSPHERE |
03/301332 DC : DRAFT JAN 2003 | ISO 12649 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR BINDING AND FINISHING SYSTEMS AND EQUIPMENT |
AIHA Z9.3 : 2007 | SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION |
09/30201361 DC : 0 | BS ISO 12643-2 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 2: PRESS EQUIPMENT AND SYSTEMS |
NFPA 481 : 2000 | PRODUCTION, PROCESSING, HANDLING, AND STORAGE OF TITANIUM |
09/30201364 DC : 0 | BS ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
NFPA 88B : 1997 | REPAIR GARAGES |
BS ISO 12643-2:2010 | Graphic technology. Safety requirements for graphic technology equipment and systems Prepress and press equipment and systems |
AWS WHC2.13 : 0 | WELDING PROCESSES - PART 1, WELDING HANDBOOK, 9TH EDITION, VOL. 2 - CHAPTER 13: SOLDERING |
NFPA 36 : 2017 | SOLVENT EXTRACTION PLANTS |
NFPA 56 (PS) : 2012 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
NFPA 49 : 1994 | HAZARDOUS CHEMICALS DATA |
ISO 12649:2004 | Graphic technology Safety requirements for binding and finishing systems and equipment |
ASTM D 5009 : 2002 : R2005 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
SAE AMS 2678: 2013 | FURNACE BRAZING OF PARTS IN A VACUUM ATMOSPHERE |
ASTM D 5286 : 2001 : R2011 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
CLC/TR 62685 : 2011 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010) |
ASTM D 3529/D3529M : 1997 : R2003 : EDT 1 | Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg |
ASTM D 3530 : 1997 : R2015 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
ASTM D 3529/D3529M : 1997 : R2008 | Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg |
ASTM D 5009 : 2002 : R2017 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
ASTM D 345 : 2002 | Side bearings of the freight wagon bogies. General specifications |
NFPA 2 : 2016 | HYDROGEN TECHNOLOGIES CODE |
NFPA 801 : 2014 | FIRE PROTECTION FOR FACILITIES HANDLING RADIOACTIVE MATERIALS |
NFPA 820 : 2016 | FIRE PROTECTION IN WASTEWATER TREATMENT AND COLLECTION FACILITIES |
NFPA 91 : 2015 | EXHAUST SYSTEMS FOR AIR CONVEYING OF VAPORS, GASES, MISTS, AND PARTICULATE SOLIDS |
13/30231511 DC : 0 | BS ISO 13577-2 - INDUSTRIAL FURNACES AND ASSOCIATED PROCESSING EQUIPMENT - SAFETY - PART 2: COMBUSTION AND FUEL HANDLING SYSTEMS |
NASA-STD-8719.11B:2020 | STANDARD FOR FIRE PROTECTION AND LIFE SAFETY |
NFPA 1 : 2021 | FIRE CODE |
I.S. EN 12753:2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
NFPA 32 : 2016 | DRYCLEANING FACILITIES |
NFPA 56 : 2017 | FIRE AND EXPLOSION PREVENTION DURING CLEANING AND PURGING OF FLAMMABLE GAS PIPING SYSTEMS |
ASTM D 3529/D3529M : 1997 | Standard Test Method for Matrix Solids Content and Matrix Content of Composite Prepreg |
BS ISO 12648:2006 | Graphic technology. Safety requirements for printing press systems |
04/30110212 DC : DRAFT MAR 2004 | ISO 12648 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR PRINTING PRESS SYSTEMS |
S.R. CLC/TR 62685:2011 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) (IEC/TR 62685:2010 (EQV)) |
CEI CLC/TR 62685 : 2012 | INDUSTRIAL COMMUNICATION NETWORKS - PROFILES - ASSESSMENT GUIDELINE FOR SAFETY DEVICES USING IEC 61784-3 FUNCTIONAL SAFETY COMMUNICATION PROFILES (FSCPS) |
ISO 13577-3:2016 | Industrial furnaces and associated processing equipment Safety Part 3: Generation and use of protective and reactive atmosphere gases |
ISO 12643-2:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 2: Prepress and press equipment and systems |
CSA C22.2 No. 293.1 : 2017 | SKIN EFFECT TRACE HEATING OF PIPELINES, VESSELS, EQUIPMENT, AND STRUCTURES - GENERAL, TESTING, MARKING, AND DOCUMENTATION REQUIREMENTS |
ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
NFPA 69 : 2014 | EXPLOSION PREVENTION SYSTEMS |
FM 7400 : SEP 2016 | LIQUID AND GAS SAFETY SHUTOFF VALVES |
ASTM D 5286 : 2001 : R2005 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
ASTM D 5009 : 2002 : R2011 | Standard Test Method for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under Laboratory Conditions |
ASTM D 5327 : 1997 : R2002 | Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions |
NFPA 55 : 2016 | COMPRESSED GASES AND CRYOGENIC FLUIDS CODE |
IEC TR 62685:2010 | Industrial communication networks - Profiles - Assessment guideline for safety devices using IEC 61784-3 functional safety communication profiles (FSCPs) |
BS EN 12753 : 2005 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
NFPA 61 : 2020 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
ICC 2012 INTERNATIONAL FIRE CODE : 2012 | INTERNATIONAL FIRE CODE |
ICC IFC CODE & COMMENTARY VOLUME 1 & 2 : 2015 | IFC® Code and Commentary |
UNI EN 12753 : 2010 | THERMAL CLEANING SYSTEMS FOR EXHAUST GAS FROM SURFACE TREATMENT EQUIPMENT - SAFETY REQUIREMENTS |
NASA STD 8719.11 : 2008 | SAFETY STANDARD FOR FIRE PROTECTION |
BS ISO 12643-1:2009 | Graphic technology. Safety requirements for graphic technology equipment and systems General requirements |
NFPA 33 FRENCH : 1995 | SPRAY APPLICATION USING FLAMMABLE OR COMBUSTIBLE MATERIALS |
08/30190505 DC : 0 | BS ISO 12643-1 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 1: GENERAL REQUIREMENTS |
NFPA 85H : 1993 | PREVENTION OF COMBUSTION HAZARDS IN ATMOSPHERIC FLUIDIZED BED COMBUSTION SYSTEM BOILERS |
14/30279065 DC : 0 | BS EN ISO 12643-3 - GRAPHIC TECHNOLOGY - SAFETY REQUIREMENTS FOR GRAPHIC TECHNOLOGY EQUIPMENT AND SYSTEMS - PART 3: BINDING AND FINISHING EQUIPMENT AND SYSTEMS |
ASTM D 5286 : 2001 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
ASTM C 613M : 1997 : R2008 : EDT 1 | Standard Test Method for Constituent Content of Composite Prepreg by Soxhlet Extraction |
NFPA 480 : 1998 | STORAGE, HANDLING, AND PROCESSING OF MAGNESIUM SOLIDS AND POWDERS |
ANSI/ASSE Z117.1 : 2009 | SAFETY REQUIREMENTS FOR ENTERING CONFINED SPACES |
ISO 12648:2006 | Graphic technology Safety requirements for printing press systems |
AIHA Z9.3 : 2007 | SPRAY FINISHING OPERATIONS - SAFETY CODE FOR DESIGN, CONSTRUCTION, AND VENTILATION |
ASTM D 5327 : 1997 | Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions |
DIN EN 12753:2011-02 | Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010) |
ISO 12643-3:2010 | Graphic technology — Safety requirements for graphic technology equipment and systems — Part 3: Binding and finishing equipment and systems |
ISO 23551-4:2005 | Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 4: Valve-proving systems for automatic shut-off valves |
BS ISO 13577-2:2014 | Industrial furnaces and associated processing equipment. Safety Combustion and fuel handling systems |
NFPA 654 : 2017 | PREVENTION OF FIRE AND DUST EXPLOSIONS FROM THE MANUFACTURING, PROCESSING, AND HANDLING OF COMBUSTIBLE PARTICULATE SOLIDS |
NFPA 61 : 2017 | PREVENTION OF FIRES AND DUST EXPLOSIONS IN AGRICULTURAL AND FOOD PROCESSING FACILITIES |
API 556 : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
NFPA 30B : 2015 | CODE FOR THE MANUFACTURE AND STORAGE OF AEROSOL PRODUCTS |
ASTM D 5327 : 1997 : R2013 | Standard Practice for Evaluating and Comparing Transfer Efficiency of Spray Applied Coatings Under General Laboratory Conditions |
API 556 REDLINE : 2011 | INSTRUMENTATION, CONTROL, AND PROTECTIVE SYSTEMS FOR GAS FIRED HEATERS |
ANSI Z117.1 REDLINE : 2009 | COMPARISON DOCUMENT OF ANSI/ASSE Z117.1 AMERICAN NATIONAL STANDARD - SAFETY REQUIREMENTS FOR CONFINED SPACES (FOR VERSIONS 1995, 2003 AND 2009) |
BS ISO 12649:2004 | Graphic technology. Safety requirements for binding and finishing systems and equipment |
ASTM D 3530/D3530M : 1997 : R2008 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
NFPA 484 : 2015 | COMBUSTIBLE METALS |
ASTM D 5286 : 2001 : R2017 | Standard Test Methods for Determination of Transfer Efficiency Under General Production Conditions for Spray Application of Paints |
NFPA 655 : 2017 | PREVENTION OF SULFUR FIRES AND EXPLOSIONS |
CSA N393:13 (R2018) | Fire protection for facilities that process, handle, or store nuclear substances |
NFPA 1402 : 2012 | BUILDING FIRE SERVICE TRAINING CENTERS |
NFPA 61D : 1989 | PREVENTION OF FIRE AND DUST EXPLOSIONS IN THE MILLING OF AGRICULTURAL COMMODITIES FOR HUMAN CONSUMPTION |
NFPA 61A : 1989 | PREVENTION OF FIRE AND DUST EXPLOSIONS IN FACILITIES MANUFACTURING AND HANDLING STARCH |
NFPA 61C : 1989 | PREVENTION OF FIRE AND DUST EXPLOSION IN FEED MILLS |
ASTM D 3530/D3530M : 1997 : R2003 | Standard Test Method for Volatiles Content of Composite Material Prepreg |
ISO 13577-2:2014 | Industrial furnaces and associated processing equipment — Safety — Part 2: Combustion and fuel handling systems |
NFPA 1 : 2018 | FIRE CODE |
IEEE/CSA 844.1/CSA C22.2 No.293.1-2017 | IEEE/CSA Standard for Skin Effect Trace Heating of Pipelines, Vessels, Equipment, and Structures - General, Testing, Marking, and Documentation Requirements |
PIP PCECV003 : 2017 | GUIDELINES FOR APPLICATION OF REMOTELY ACTUATED ON-OFF VALVES |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.