ASME PV CODE 8 DIV 2 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 2- ALTERNATIVE RULES |
BS EN ISO 18274:2010
|
Welding consumables. Solid wire electrodes, solid strip electrodes, solid wires and solid rods for fusion welding of nickel and nickel alloys. Classification |
BS EN 10213-2:1996
|
Technical delivery conditions for steel castings for pressure purposes Steel grades for use at room temperature and at elevated temperature |
BS EN 10021:2006
|
General technical delivery conditions for steel products |
BS EN 288-4:1992
|
Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of aluminium and its alloys |
BS EN 10222-4:2017
|
Steel forgings for pressure purposes Weldable fine grain steels with high proof strength |
BS EN ISO 15614-8:2016
|
Specification and qualification of welding procedures for metallic materials. Welding procedure test Welding of tubes to tube-plate joints |
BS EN 10217-4:2002
|
Welded steel tubes for pressure purposes. Technical delivery conditions Electric welded non-alloy steel tubes with specified low temperature properties |
BS EN 10028-7:2007
|
Flat products made of steels for pressure purposes Stainless steels |
BS EN 1291:1998
|
Non-destructive testing of welds. Magnetic particle testing of welds. Acceptance levels |
BS EN 13133:2000
|
Brazing. Brazer approval |
BS 7910:1999
|
Guide on methods for assessing the acceptability of flaws in metallic structures |
BS EN 287-1:2011
|
Qualification test of welders. Fusion welding Steels |
BS EN 1011-4:2000
|
Welding. Recommendations for welding of metallic materials Arc welding of aluminium and aluminium alloys |
BS 4504-3.1:1989
|
Circular flanges for pipes, valves and fittings (PN designated). Steel, cast iron and copper alloy flanges Specification for steel flanges |
BS 3643-1:1981
|
ISO metric screw threads Principles and basic data |
BS 2875:1969
|
Specification for copper and copper alloys. Plate |
BS EN 1290:1998
|
Non-destructive examination of welds. Magnetic particle examination of welds |
BS EN 288-2:1992
|
Specification and approval of welding procedures for metallic materials Welding procedures specification for arc welding |
API 520-1 : 2014
|
SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 1: SIZING AND SELECTION |
BS EN 287-2:1992
|
Approval testing of welders for fusion welding Aluminium and aluminium alloys |
BS 3605-1:1991
|
Austenitic stainless steel pipes and tubes for pressure purposes Specification for seamless tubes |
ASME PV CODE 8 DIV 1 : 2017
|
BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS DIVISION 1 |
BS EN 10222-5:2017
|
Steel forgings for pressure purposes Martensitic, austenitic and austenitic-ferritic stainless steels |
BS EN 10028-6:2017
|
Flat products made of steels for pressure purposes Weldable fine grain steels, quenched and tempered |
BS EN 10217-2 : 2002
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 2: ELECTRIC WELDED NON-ALLOY AND ALLOY STEEL TUBES WITH SPECIFIED ELEVATED TEMPERATURE PROPERTIES |
BS EN 10025:1993
|
Hot rolled products of non-alloy structural steels. Technical delivery conditions |
PD 6550-1:1989
|
Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design Domed ends (heads) |
BS EN 12797:2000
|
Brazing. Destructive tests of brazed joints |
BS 7777-2:1993
|
Flat-bottomed, vertical, cylindrical storage tanks for low temperature service Specification for the design and construction of single, double and full containment metal tanks for the storage of liquefied gas at temperatures down to -165°C |
ASME PV CODE 8 DIV 3 : 2017
|
BPVC Section VIII-BOILER AND PRESSURE VESSEL CODE - RULES FOR CONSTRUCTION OF PRESSURE VESSELS - ALTERNATIVE RULES FOR CONSTRUCTION OF HIGH PRESSURE VESSELS |
BS 8110-3(1985) : 1985
|
STRUCTURAL USE OF CONCRETE - PART 3: DESIGN CHARTS FOR SINGLY REINFORCED BEAMS, DOUBLY REINFORCED BEAMS AND RECTANGULAR COLUMNS |
BS 8110-2:1985
|
STRUCTURAL USE OF CONCRETE - PART 2: CODE OF PRACTICE FOR SPECIAL CIRCUMSTANCES |
BS EN 20898-2:1994
|
Mechanical properties of fasteners Nuts with specified proof load values. Coarse thread |
BS EN 10213-3:1996
|
Technical delivery conditions for steel castings for pressure purposes Steels for use at low temperatures |
BS EN 1435:1997
|
Non-destructive examination of welds. Radiographic examination of welded joints |
BS EN 13185:2001
|
Non-destructive testing. Leak testing. Tracer gas method |
BS EN 1044:1999
|
Brazing. Filler metals |
BS 3451:1973
|
Methods of testing fusion welds in aluminium and aluminium alloys |
BS EN 1714:1998
|
Non destructive testing of welded joints. Ultrasonic testing of welded joints |
BS EN 10217-6:2002
|
Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy steel tubes with specified low temperature properties |
PD 6550-2:1989
|
Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design Openings and branch connections |
BS EN 10028-3:2017
|
Flat products made of steels for pressure purposes Weldable fine grain steels, normalized |
BS EN 25817:1992
|
Arc-welded joints in steel. Guidance on quality levels for imperfections |
BS EN 10216-3:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
BS EN ISO 898-1:2013
|
Mechanical properties of fasteners made of carbon steel and alloy steel Bolts, screws and studs with specified property classes. Coarse thread and fine pitch thread |
API 521 : 2014
|
PRESSURE-RELIEVING AND DEPRESSURING SYSTEMS |
BS 3604-2:1991
|
Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties. Specification for longitudinally arc welded tubes |
ISO 1302:2002
|
Geometrical Product Specifications (GPS) Indication of surface texture in technical product documentation |
ISO 6303:1981
|
Pressure vessel steels not included in ISO 2604, Parts 1 to 6 — Derivation of long-time stress rupture properties |
BS EN 1369:2012
|
Founding. Magnetic particle testing |
BS EN 10028-2:2017
|
Flat products made of steels for pressure purposes Non-alloy and alloy steels with specified elevated temperature properties |
BS EN 10029:2010
|
Hot-rolled steel plates 3 mm thick or above. Tolerances on dimensions and shape |
BS EN 10217-5:2002
|
Welded steel tubes for pressure purposes. Technical delivery conditions Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties |
BS 3602-1:1987
|
Specification for steel pipes and tubes for pressure purposes: carbon and carbon manganese steel with specified elevated temperature properties Specification for seamless and electric resistance welded including induction welded tubes |
PD CR ISO 15608:2000
|
Welding. Guidelines for a metallic material grouping system |
BS EN 1371-1:2011
|
Founding. Liquid penetrant testing Sand, gravity die and low pressure die castings |
BS EN 10028-4:2017
|
Flat products made of steels for pressure purposes Nickel alloy steels with specified low temperature properties |
BS 3604-1:1990
|
Steel pipes and tubes for pressure purposes: ferritic alloy steel with specified elevated temperature properties Specification for seamless and electric resistance welded tubes |
BS 7257:1989
|
Methods for radiographic examination of fusion welded branch and nozzle joints in steel |
BS EN 288-3:1992
|
Specification and approval of welding procedures for metallic materials Welding procedure tests for the arc welding of steels |
BS 3274:1960
|
Specification for tubular heat exchangers for general purposes |
BS 1503:1989
|
Specification for steel forgings for pressure purposes |
BS EN 10217-3:2002
|
Welded steel tubes for pressure purposes. Technical delivery conditions Alloy fine grain steel tubes |
BS 4504-3.2(1989) : 1989
|
CIRCULAR FLANGES FOR PIPES, VALVES & FITTINGS (PN DESIGNATED) - STEEL, CAST IRON & COPPER ALLOY FLANGES - SPECIFICATION FOR CAST IRON FLANGES |
BS 4870-4:1988
|
Specification for approval testing of welding procedures Specification for automatic fusion welding of metallic materials, including welding operator approval |
BS 499-1:1991
|
Welding terms and symbols Glossary for welding, brazing and thermal cutting |
BS EN 876:1995
|
Destructive tests on welds in metallic materials. Longitudinal tensile test on weld metal in fusion welded joints |
BS EN 10273:2016
|
Hot rolled weldable steel bars for pressure purposes with specified elevated temperature properties |
ASME B16.5 : 2017
|
PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD |
BS 3920(1973) : AMD 5516
|
SPECIFICATION FOR PROCEDURE FOR DERIVING AND VERIFYING THE MINIMUM ELEVATED TEMPERATURE YIELD OR PROOF STRESS PROPERTIES OF STEEL PRODUCTS |
BS EN 10216-1:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
BS EN 515:2017
|
Aluminium and aluminium alloys. Wrought products. Temper designations |
BS 3692:2001
|
ISO metric precision hexagon bolts, screws and nuts. Specification |
BS 5046:1974
|
Method for the estimation of equivalent diameters in the heat treatment of steel |
BS EN 12392:2016
|
Aluminium and aluminium alloys. Wrought products and cast products. Special requirements for products intended for the production of pressure equipment |
BS EN 571-1:1997
|
Non-destructive testing. Penetrant testing General principles |
BS EN 10269:2013
|
Steels and nickel alloys for fasteners with specified elevated and/or low temperature properties |
BS EN 13184:2001
|
Non-destructive testing. Leak testing. Pressure change method |
BS EN 1779:1999
|
Non-destructive testing. Leak testing. Criteria for method and technique selection |
BS EN 10222-2:2017
|
Steel forgings for pressure purposes Ferritic and martensitic steels with specified elevated temperatures properties |
BS 5044:1973
|
Specification for contrast aid paints used in magnetic particle flaw detection |
BS EN 10217-1:2002
|
Welded steel tubes for pressure purposes. Technical delivery conditions Non-alloy steel tubes with specified room temperature properties |
BS 3076:1989
|
Specification for nickel and nickel alloys: bar |
BS EN 10216-4:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified low temperature properties |
PD 6550-4:1989
|
Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design Heat exchanger tubesheets |
BS 5400-10(1980) : 1980
|
STEEL CONCRETE AND COMPOSITE BRIDGES - PART 10: CODE OF PRACTICE FOR FATIGUE |
BS EN 10160:1999
|
Ultrasonic testing of steel flat product of thickness equal or greater than 6 mm (reflection method) |
BS EN 10045-1:1990
|
Charpy impact test on metallic materials Test method (V- and U-notches) |
BS EN 10002-5:1992
|
Tensile testing of metallic materials Method of test at elevated temperatures |
BS 4504-2:1974
|
Circular flanges for pipes, valves and fittings (PN designated) Copper alloy and composite flanges |
BS 1723-4:1988
|
Brazing Methods for specifying brazing procedure and operator approval testing |
BS 3441:1995
|
Specification for tanks for the transport of milk and liquid milk products |
BS EN 1759-3:2003
|
Flanges and their joints. Circular flanges for pipes, valves, fittings and accessories, class designated Copper alloy flanges |
BS EN 1593:1999
|
Non-destructive testing. Leak testing. Bubble emission techniques |
BS 4504-3.3:1989
|
Circular flanges for pipes, valves and fittings (PN designated) Specification for copper alloy and composite flanges |
BS EN ISO 9606-3:1999
|
Approval testing of welders. Fusion welding Copper and copper alloys |
BS EN 10216-2:2013
|
Seamless steel tubes for pressure purposes. Technical delivery conditions Non-alloy and alloy steel tubes with specified elevated temperature properties |
BS EN 45004:1995
|
General criteria for the operation of various types of bodies performing inspection |
BS 1515(1965) : LATEST
|
|
PREN 10217-7 : DRAFT 2009
|
WELDED STEEL TUBES FOR PRESSURE PURPOSES - TECHNICAL DELIVERY CONDITIONS - PART 7: STAINLESS STEEL TUBES |
BS 3605-2:1992
|
Austenitic stainless steel pipes and tubes for pressure purposes Specification for longitudinally welded tubes |
BS 4504-1:1969
|
Circular flanges for pipes, valves and fittings (PN designated) Ferrous |
PD 6497:1982
|
Stresses in horizontal cylindrical pressure vessels supported on twin saddles: a derivation of the basic equations and constants used in G.3.3 of BS 5500:1982 |
API 520-2 : 2015
|
SIZING, SELECTION, AND INSTALLATION OF PRESSURE-RELIEVING DEVICES - PART 2: INSTALLATION |
BS EN 1515-1:2000
|
Flanges and their joints. Bolting Selection of bolting |
BS 4870-2:1982
|
Specification for approval testing of welding procedures TIG or MIG welding of aluminium and its alloys |
BS EN 10002-1:2001
|
Tensile testing of metallic materials Method of test at ambient temperature |
BS EN 288-1:1992
|
Specification and approval of welding procedures for metallic materials General rules for fusion welding |
BS EN 10222-3:2017
|
Steel forgings for pressure purposes Nickel steels with specified low temperature properties |
BS 449-2:1969
|
Specification for the use of structural steel in building Metric units |
BS EN 10213-4:1996
|
Technical delivery conditions for steel castings for pressure purposes Austenitic and austenitic-ferritic steel grades |
1997/23/EC : 1997
|
DIRECTIVE 97/23/EC OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL OF 29 MAY 1997 ON THE APPROXIMATION OF THE LAWS OF THE MEMBER STATES CONCERNING PRESSURE EQUIPMENT |
BS EN 13134:2000
|
Brazing. Procedure approval |
PD 6550-3:1989
|
Explanatory supplement to BS 5500:1988. Specification for unfired fusion welded pressure vessels. Section three. Design Vessels under external pressure |
BS EN 10272:2007
|
Stainless steel bars for pressure purposes |
BS 1504:1976
|
Specification for steel castings for pressure purposes |