PD ISO/TR 17784:2003
Current
Current
The latest, up-to-date edition.
Rubber and plastic hoses and hose assemblies. Guide for use by purchasers, assemblers, installers and operating personnel
Available format(s)
Hardcopy , PDF
Language(s)
English
Published date
05-12-2003
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Terms and definitions
3 General considerations for hoses
4 Rubber hoses
5 Plastics hoses
6 Applications of rubber and plastics hoses and hose assemblies
7 Couplings
Bibliography
Provides general information on rubber and plastic hoses with regard to both their properties and their practical application. This includes, amongst other things, the properties of materials used in hoses, the precautions to be taken when storing hoses and the care required when installing and fitting hoses and their couplings.
| Committee |
PRI/66
|
| DocumentType |
Standard
|
| Pages |
62
|
| PublisherName |
British Standards Institution
|
| Status |
Current
|
This Technical Report contains general information on rubber and plastic hoses with regard to both their properties and their practical application. This includes, amongst other things, the properties of materials used in hoses, the precautions to be taken when storing hoses and the care required when installing and fitting hoses and their couplings. Safety measures when testing hoses are also indicated. This Technical Report is intended for use by system designers, purchasers, assemblers, installers and operating personnel to improve the operating safety of hoses and hose assemblies.
NOTE Metal hoses are not included in this Technical Report. Attention is drawn to the following International Standards: ISO8444, ISO8445, ISO8446, ISO8447, ISO8448, ISO8449, ISO8450, ISO10807, ISO10806 and ISO10380.
This Technical Report cannot, in practice, cover all circumstances and therefore its content is largely based on examples. It is assumed that these examples will provide sufficient information to give guidelines for a range of practical circumstances.
| Standards | Relationship |
| ISO/TR 17784:2003 | Identical |
| ISO 4079-1:2001 | Rubber hoses and hose assemblies Textile-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| ISO 4081:2016 | Rubber hoses and tubing for cooling systems for internal-combustion engines Specification |
| ISO 11759:1999 | Rubber hoses and hose assemblies for dispensing liquefied petroleum gases (LPGs) — Specification |
| ISO 8030:2014 | Rubber and plastics hoses — Method of test for flammability |
| ISO 4132:1979 | Unplasticized polyvinyl chloride (PVC) and metal adaptor fittings for pipes under pressure — Laying lengths and size of threads — Metric series |
| ISO 5774:2016 | Plastics hoses — Textile-reinforced types for compressed-air applications — Specification |
| ISO 3821:2008 | Gas welding equipment Rubber hoses for welding, cutting and allied processes |
| ISO 1825:2010 | Rubber hoses and hose assemblies for aircraft ground fuelling and defuelling Specification |
| ISO 4639-3:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 3: Oxidized fuels |
| ISO 8066-1:1997 | Rubber and plastics hoses and hose assemblies for automotive air conditioning Specification Part 1: Refrigerant 12 |
| ISO 7662:1988 | Rubber and plastics hoses — Determination of abrasion of lining |
| ISO 4641:2016 | Rubber hoses and hose assemblies for water suction and discharge — Specification |
| ISO 8066-2:2001 | Rubber and plastics hoses and hose assemblies for automotive air conditioning Specification Part 2: Refrigerant 134a |
| ISO/TR 5924:1989 | Fire tests — Reaction to fire — Smoke generated by building products (dual-chamber test) |
| ISO 3949:2009 | Plastics hoses and hose assemblies Textile-reinforced types for hydraulic applications Specification |
| ISO 6801:1983 | Rubber or plastics hoses Determination of volumetric expansion |
| ISO 7313:1984 | Aircraft High temperature convoluted hose assemblies in polytetrafluoroethylene (PTFE) |
| ISO 1401:2016 | Rubber hoses for agricultural spraying |
| ISO 2398:2016 | Rubber hoses, textile-reinforced, for compressed air — Specification |
| ISO 4672:1997 | Rubber and plastics hoses Sub-ambient temperature flexibility tests |
| ISO 1823-2:1997 | Rubber hoses and hose assemblies Part 2: Ship/dockside discharge Specification |
| ISO 13774:1998 | Rubber and plastics hoses for fuels for internal-combustion engines — Method of test for flammability |
| ISO/TR 7620:2005 | Rubber materials — Chemical resistance |
| BS 5958-2:1991 | Code of practice for control of undesirable static electricity Recommendations for particular industrial situations |
| ISO/TR 8354:1987 | Rubber hoses and hose assemblies for underground mining Textile-reinforced air and water type |
| ISO 14113:2013 | Gas welding equipment — Rubber and plastics hose and hose assemblies for use with industrial gases up to 450 bar (45 MPa) |
| ISO 5031:1977 | Continuous mechanical handling equipment for loose bulk materials — Couplings and hose components used in pneumatic handling — Safety code |
| ISO 7233:2016 | Rubber and plastics hoses and hose assemblies Determination of resistance to vacuum |
| ISO 8829:1990 | Aerospace Polytetrafluoroethylene (PTFE) hose assemblies Test methods |
| ISO 8331:2016 | Rubber and plastics hoses and hose assemblies Guidelines for selection, storage, use and maintenance |
| NEN 3374 : 1971 AMD 1 1975 | FIRE FIGHTING EQUIPMENT - FIRE HOSE COUPLINGS AND ANCILLARY EQUIPMENT |
| ISO 4639-2:1995 | Rubber tubing and hoses for fuel circuits for internal-combustion engines Specification Part 2: Oxygenated fuels |
| ISO 6772:2012 | Aerospace — Fluid systems — Impulse testing of hydraulic hose, tubing and fitting assemblies |
| ISO 7326:2016 | Rubber and plastics hoses Assessment of ozone resistance under static conditions |
| ISO 8789:2009 | Rubber hoses and hose assemblies for liquefied petroleum gas in motor vehicles Specification |
| ISO 8330:2007 | Rubber and plastics hoses and hose assemblies Vocabulary |
| ISO 3861:2005 | Rubber hoses for sand and grit blasting Specification |
| ISO 5359:2014 | Anaesthetic and respiratory equipment — Low-pressure hose assemblies for use with medical gases |
| ISO 6120:1995 | Road vehicles Brake hose assemblies for hydraulic braking systems used with petroleum-base brake fluid |
| ISO 1823-1:1997 | Rubber hoses and hose assemblies Part 1: On-shore oil suction and discharge Specification |
| ISO 10960:1994 | Rubber and plastics hoses Assessment of ozone resistance under dynamic conditions |
| ISO 7258:1984 | Polytetrafluoroethylene (PTFE) tubing for aerospace applications Methods for the determination of the density and relative density |
| ISO 2928:2003 | Rubber hoses and hose assemblies for liquefied petroleum gas (LPG) in the liquid or gaseous phase and natural gas up to 25 bar (2,5 MPa) Specification |
| ISO 1403:2005 | Rubber hoses, textile-reinforced, for general-purpose water applications Specification |
| ISO 6808:2014 | Plastics hoses and hose assemblies for suction and low-pressure discharge of petroleum liquids — Specification |
| ISO 1436-1:2001 | Rubber hoses and hose assemblies Wire-braid-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| ISO 8207:1996 | Gas welding equipment — Specification for hose assemblies for equipment for welding, cutting and allied processes |
| ISO 6802:2005 | Rubber and plastics hoses and hose assemblies with wire reinforcements Hydraulic impulse test with flexing |
| DIN 86200:1989-11 | FIRE EXTINGUISHING AND WASH DECK INSTALLATIONS; HOSE COUPLINGS, ARMATURES, HOSES, ACCESSORIES; SUMMARY OF TYPES FOR SHIPBUILDING |
| ISO 6804:2016 | Rubber and plastics inlet hoses and hose assemblies for washing-machines and dishwashers — Specification |
| ISO 8028:1999 | Rubber and/or plastics hoses and hose assemblies for airless paint spraying Specification |
| ISO 3996:1995 | Road vehicles — Brake hose assemblies for hydraulic braking systems used with non-petroleum-base brake fluid |
| ISO 8308:2015 | Rubber and plastics hoses and tubing Determination of transmission of liquids through hose and tubing walls |
| ISO 8580:1987 | Rubber and plastics hoses Determination of ultra-violet resistance under static conditions |
| ISO/TR 5987:1984 | Inland navigation Water fire-fighting system Couplings of fire hoses General technical requirements |
| ISO 5772:2015 | Rubber and plastic hoses and hose assemblies for measured fuel dispensing systems Specification |
| ISO 8032:1997 | Rubber and plastics hose assemblies Flexing combined with hydraulic impulse test (half-omega test) |
| ISO 3994:2014 | Plastics hoses — Helical-thermoplastic-reinforced thermoplastics hoses for suction and discharge of aqueous materials — Specification |
| ISO 7751:2016 | Rubber and plastics hoses and hose assemblies Ratios of proof and burst pressure to maximum working pressure |
| ISO 6134:2017 | Rubber hoses and hose assemblies for saturated steam — Specification |
| ISO 6806:2017 | Rubber hoses and hose assemblies for use in oil burners — Specification |
| ISO 4023:2009 | Rubber hoses and hose assemblies for steam — Test methods |
| ISO 5771:2008 | Rubber hoses and hose assemblies for transferring anhydrous ammonia — Specification |
| ISO 4671:2007 | Rubber and plastics hoses and hose assemblies Methods of measurement of the dimensions of hoses and the lengths of hose assemblies |
| ISO 4639-1:1987 | Rubber tubing and hoses for fuel circuits for internal combustion engines Specification Part 1: Conventional liquid fuels |
| ISO 11425:1996 | Rubber hoses and hose assemblies for automobile power-steering systems Specification |
| ISO 3253:1998 | Gas welding equipment Hose connections for equipment for welding, cutting and allied processes |
| ISO 1402:2009 | Rubber and plastics hoses and hose assemblies Hydrostatic testing |
| ISO 11424:2017 | Rubber hoses and tubing for air and vacuum systems for internal-combustion engines — Specification |
| ISO 1307:2006 | Rubber and plastics hoses — Hose sizes, minimum and maximum inside diameters, and tolerances on cut-to-length hoses |
| ISO 4080:2009 | Rubber and plastics hoses and hose assemblies — Determination of permeability to gas |
| ISO 6803:2017 | Rubber or plastics hoses and hose assemblies — Hydraulic-pressure impulse test without flexing |
| ISO 6807:2003 | Rubber hoses and hose assemblies for rotary drilling and vibration applications Specification |
| ISO 3862-1:2001 | Rubber hoses and hose assemblies Rubber-covered spiral-wire-reinforced hydraulic types Specification Part 1: Oil-based fluid applications |
| ISO 4642:1978 | Rubber products Hoses, non-collapsible, for fire-fighting service |
| ISO 12170:1996 | Gas welding equipment Thermoplastic hoses for welding and allied processes |
| ISO 6805:1994 | Rubber hoses and hose assemblies for underground mining Wire-reinforced hydraulic types for coal mining Specification |
| ISO 8029:2014 | Plastics hose — General-purpose collapsible water hose, textile-reinforced — Specification |
| ISO 2929:2014 | Rubber hoses and hose assemblies for bulk fuel delivery by truck Specification |
| ISO 8033:2016 | Rubber and plastics hoses Determination of adhesion between components |
| ISO 8575:2016 | Aerospace — Fluid systems — Hydraulic system tubing |
| ISO 8031:2009 | Rubber and plastics hoses and hose assemblies Determination of electrical resistance and conductivity |
| ISO 6224:2011 | Thermoplastics hoses, textile-reinforced, for general-purpose water applications — Specification |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.