SAE AMSQQP416E
Superseded
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
PLATING, CADMIUM (ELECTRODEPOSITED)
Available format(s)
Hardcopy , PDF
Superseded date
09-03-2021
Superseded by
Language(s)
English
Published date
13-01-2016
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
1. SCOPE
2. APPLICABLE DOCUMENTS
3. REQUIREMENTS
4. QUALITY ASSURANCE PROVISIONS
5. NOTES
Specifies the requirements for electrodeposited cadmium plating.
| Committee |
AMS B
|
| DevelopmentNote |
Supersedes QQ P 416 (08/2000)
|
| DocumentType |
Revision
|
| Pages |
16
|
| PublisherName |
SAE International
|
| Status |
Superseded
|
| SupersededBy | |
| Supersedes |
| Standards | Relationship |
| QQ-P-416 Revision F:1991 | Similar to |
| SAE AS 95234 : 2014 | CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
| MIL-DTL-32371-8 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degree Elbow, Bulkhead |
| MIL-PRF-7907 Revision C:2007 | Cleaning Compound, Decontaminating (for Soiled and Radioactive Contaminated Surfaces) |
| MIL-DTL-32460-3 Base Document:2013 | FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
| MIL-DTL-83413-5 Revision C:2013 | CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: RECEPTACLES, ONE PIECE |
| MIL-DTL-32480-1 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-32372-4 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead |
| MS51819 Revision E:1987 | ADAPTER, STRAIGHT, PIPE TO TUBE MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
| MS51510 Revision D:2017 | TEE, TUBE, 37 DEGREE FLARED |
| MS51525 Revision B:1988 | FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED |
| MS28780 Revision F:2007 | Fitting End, 45 Degrees Elbow, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flared Tube |
| MIL-DTL-52404 Revision C:2010 | CONNECTIONS: HOSE, FIRE AND WATER |
| MS39210 Revision K:2018 | NUTS, TUBE COUPLING - SAFETY SLEEVE COMPRESSION TYPE |
| MIL-DTL-52471-10 Revision B:2008 | Hose Assemblies, Rubber, Hydraulic Pressure-Type, Type 100R12 Four-Spiral-Wrap Reinforcement Hose |
| MIL-DTL-52525-35 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-32480-5 Base Document:2014 | Fitting, Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MS51814 Revision E:1987 | NIPPLE, TUBE, BULKHEAD, REGULAR HEX, FLARELESS TYPE, HYDRAULIC |
| MIL-DTL-32371-10 Base Document:2012 | Fittings, Hydraulic Tube, Sleeve, Double Angle |
| MIL-DTL-32371-4 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Spherical on Branch |
| AA-C-2786 Base Document:2004 | CABINET, SECURITY, INFORMATION PROCESSING SYSTEM STORAGE, CLASS 5 |
| MIL-DTL-52525-10 Revision D:2011 | Fittings, Hose, Screw-on to 4-Bolt Split-Flange, Straight |
| 16/30354034 DC : 0 | BS EN 4854-1 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, NARROW SERIES - DIMENSIONS AND LOADS |
| MIL-DTL-32372-12 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, NPTF Male on Branch to ORFS Male Run to Run |
| MIL-DTL-12520-9 Revision B:2005 | Connectors, Receptacle, Electrical Waterproof (Shell Size 20, Female Inserts) |
| MS51519 Revision C:2017 | NIPPLE, TUBE, LARGE HEX, FOR USE WITH O-RING, 37 DEGREE FLARED |
| MIL-DTL-83796-10 Revision A:2014 | HOSE ASSEMBLY, RUBBER, LIGHT WEIGHT, INTERNAL SUPPORT COIL, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
| MIL-DTL-52525-7 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degrees Flare Female Swivel, 90 Degrees Bent Tube, Short Drop |
| AN915 Revision 14:2015 | ELBOW, PIPE, 45 DEGREES |
| MIL-DTL-32464-6 Base Document:2013 | Male Adapted, Union Cross, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI |
| MS39206 Revision G:2012 | ADAPTERS, STRAIGHT, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, MALE PIPE END |
| A-A-59440-1 Revision B:2012 | COCK-VALVE, CENTER DRAIN, INTERNAL SEAT OR EXTERNAL SEAT, 150 PSI, BRASS, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS |
| A-A-59440-2 Revision B:2012 | COCK-VALVE, DRAIN, WITH HOSE BIB, 150 PSI, NON-FLAMMABLE LIQUID OR GAS, NPTF-1 THREADS |
| MIL-DTL-32480 Base Document:2014 | Adapter, Hydraulic and Pneumatic, Flareless Tube Fitting to ORFS Connectors, 1500 to 3000 PSI and Minus 65 Degrees Fahrenheit to Plus 250 Degrees Fahrenheit, General Specification for |
| MIL-DTL-4510 Revision F:2009 | Spotlights, Incandescent, Roof-Mounted, Automotive |
| MIL-DTL-32464-1 Base Document:2013 | Male Adapter, Straight, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-32464-12 Base Document:2013 | Male Adapter, Tee, 37 Degrees Spherical to ANPT, ANPT on Branch, 1500-3000 PSI |
| MIL-DTL-83796-11 Revision A:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
| MIL-DTL-53072 Revision F:2017 | CHEMICAL AGENT RESISTANT COATING (CARC) SYSTEM - APPLICATION PROCEDURES AND QUALITY CONTROL INSPECTION |
| MS35758 Revision D:2012 | CUPS, GREASE, MANUAL FEED |
| SAE AS8952A | BEARINGS, ROLLER, ROD END, ANTIFRICTION SELF-ALIGNING |
| MIL-DTL-12520-8 Revision B:2005 | Connector, Receptacle, Electrical, Waterproof (Shell Size 20, Male Inserts) |
| MS28781 Revision E:2007 | Fitting End, 90 Degrees Elbow, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flared Tube |
| MIL-DTL-5002 Revision E:2011 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| SAE AS1241D | FIRE RESISTANT PHOSPHATE ESTER HYDRAULIC FLUID FOR AIRCRAFT |
| MS39199 Revision G:2012 | NIPPLE, TUBE-SAFETY SLEEVE COMPRESSION TYPE, BULKHEAD MOUNTING |
| MS51825 Revision H:2008 | SLEEVES, CLINCHES, TUBE FITTING, FLARELESS TYPE, HYDRAULIC |
| MIL-DTL-52525-32 Revision A:2008 | FITTINGS, HOSE, REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPIRAL-WRAP REINFORCEMENT HOSE |
| MS51811 Revision E:1987 | TEE, TUBE, FLARELESS TYPE HYDRAULIC |
| MS51534 Revision A:1979 | REDUCER, TUBE, 37 DEGREE FLARED |
| MIL-DTL-52525-44 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MIL-DTL-32480-6 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS Bulkhead |
| MIL-DTL-32372-8 Revision A:2017 | Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MIL-DTL-32372-9 Revision A:2017 | Fitting, Adapter, 90 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| AN849 Revision 13:2015 | NIPPLE, HOSE |
| AN838 Revision 9:2011 | Elbow, Tube to Hose, 90 Degrees |
| MIL-DTL-52525-11 Revision C:2008 | Fittings, Hose, Screw-On to 4-Bolt Split-Flange, 45 Degree Bent Tube |
| MS51501 Revision C:2016 | NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, SHORT |
| MIL-DTL-52525-1 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight, SAE-J516 Type, for Assembly with SAE-J517, Type 100R2 Hose |
| MS51521 Revision C:2017 | ELBOW, TUBE, 90 DEGREE, SWIVEL, 37 DEGREE FLARED |
| MS51528 Revision B:1988 | FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; ELBOW, TUBE TO BOSS, 45 DEGREE, O-RING, 37 DEGREE FLARED |
| MS51816 Revision E:1987 | ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC |
| MIL-DTL-52525-43 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-32372-7 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Female Swivel |
| MIL-DTL-32371-3 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 90 Degrees Elbow |
| MIL-DTL-32372-6 Revision A:2017 | Fitting, Adapter, 90 Degree Male, Hydraulic and Pneumatic, NPTF to ORFS Bulkhead |
| MIL-DTL-32371-6 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Nipple Tube, Regular Hex, Long |
| A-A-59440-7 Revision B:2012 | Valve, Shut-Off, Screw Stem, Threaded Type, 150 PSI, Brass, Water, Oil, and Gas (WOG), NPTF-1 Threads |
| MIL-DTL-32372 Revision A:2016 | Fitting, Adapter, Hydraulic and Pneumatic, NPTF to ORFS Connectors, 1500 to 3000 PSI and -65°F to 250°F |
| AN815 Revision 10:2015 | UNION - FLARED TUBE |
| MS51509 Revision D:2017 | ELBOW, TUBE, 45 DEGREE, BULKHEAD, 37 DEGREE FLARED |
| MS51524 Revision C:2017 | TEE, TUBE TO SWIVEL, SWIVEL ON BRANCH, 37 DEGREE FLARED |
| MS51502 Revision C:2016 | NIPPLE TUBE, REGULAR HEX, 37 DEGREE FLARED, LONG |
| MS39212 Revision K:2018 | SLEEVES, COMPRESSION, TUBE - HOSE FITTING - SAFETY SLEEVE TYPE |
| MS51514 Revision D:2017 | TEE, PIPE TO TUBE, FEMALE PIPE ON RUN 37 DEGREE FLARED |
| MS51503 Revision C:2016 | ADAPTER, STRAIGHT, PIPE TO TUBE, FEMALE PIPE END, 37 DEGREE FLARED |
| SAE ARP 5794 : 2014 | CENTRIFUGAL AIRCRAFT FUEL PUMP REQUIREMENTS, DESIGN AND TESTING, AEROSPACE STANDARD |
| MIL-DTL-8878 Revision L:2014 | TURNBUCKLES, POSITIVE SAFETYING, GENERAL SPECIFICATION FOR |
| MIL-DTL-62011-2 Base Document:2009 | Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, Side-Mounted Connector, Type II |
| MS51529 Revision B:1988 | FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON BRANCH, O-RING |
| MIL-DTL-28748-15 Base Document:2004 | CONNECTORS, ELECTRICAL, HEXAGONAL, RACK AND PANEL, MINIATURE, PLUG-RECEPTACLE, FEMALE SOLDER CUP OR PRINTED WIRING BOARD SOCKET CONTACTS, SIZE 20 |
| AN6204 Revision L:2013 | Valve, Hydraulic Bleeder |
| AN846 Revision 9:2013 | ELBOW, HOSE, 45 DEGREES |
| MS51532 Revision B:1988 | FITTING, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, STEEL; CAP, TUBE, 37 DEGREE FLARED |
| MIL-DTL-32372-2 Revision A:2017 | Fitting, Adapter, 45 DegreesElbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MIL-DTL-32480-7 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MS51520 Revision C:2017 | NIPPLE, TUBE, BULKHEAD, 37 DEGREE FLARED |
| MIL-STD-1500 Revision C:2007 | Cadmium-Titanium Plating, Low Embrittlement, Electrodeposition |
| FF-S-200 Revision B:2004 | SETSCREWS: HEXAGON SOCKET AND SPLINE SOCKET, HEADLESS |
| MIL-PRF-23145 Revision C:2018 | Inflation Assemblies, Life Preserver |
| MIL-DTL-83796-4 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS WITH LOCKWIRE HOLE |
| MIL-DTL-22992 Revision H:2015 | Connectors, Plugsand Receptacles, Electrical, Waterproof, Quick Disconnect, Heavy Duty Type, General Specification for |
| MIL-DTL-45912 Revision B:2013 | BOLT, SELF-LOCKING, HEXAGON HEAD, STEEL |
| MIL-DTL-52471-1 Revision C:2008 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100R1, SINGLE-WIRE BRAIDED REINFORCEMENT HOSE |
| MIL-DTL-52525-6 Revision C:2008 | Fittings,Hose, Screw-on to 37 Degree Flare Female Swivel, 45Degree BentTube |
| SAE AS 4775 : 2017 | AIRCRAFT MAINTENANCE JACKS - GENERAL REQUIREMENTS |
| MIL-DTL-83798-4 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, Straight |
| MS51507 Revision D:2017 | ELBOW, TUBE, 90 DEGREE, 37 DEGREE BULKHEAD, FLARED |
| MS51508 Revision D:2017 | ELBOW, PIPE TO TUBE, 45 DEGREE, MALE PIPE END, 37 DEGREE FLARED |
| MS51516 Revision C:2017 | TEE, BULKHEAD ON RUN 37 DEGREE FLARED |
| MIL-DTL-52525-36 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| MIL-DTL-32371-9 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Tee, Bulkhead, Spherical on Run |
| MIL-DTL-52525-15 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| MIL-DTL-3903 Revision F:2013 | WIRE ROPE ASSEMBLIES, SINGLE LEG, (SLING TYPE) |
| NASM 35206 : 2004 | SCREW, MACHINE, PAN HEAD, CRUCIFORM RECESS, CARBON STEEL, UNC-2A |
| DSCC 84168 : F | HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL |
| SAE AS 12500 : 2018 | CORROSION PREVENTION AND DETERIORATION CONTROL IN ELECTRONIC COMPONENTS AND ASSEMBLIES |
| SAE AS 50151 : 2015 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE, GENERAL SPECIFICATION FOR |
| SAE AS 95234A : 2020 | CONNECTORS, ELECTRICAL, REVERSE BAYONET, GENERAL SPECIFICATION FOR |
| 15/30333168 DC : 0 | BS EN 6118 - AEROSPACE SERIES - PROCESS SPECIFICATION - ALUMINIUM BASE PROTECTION FOR FASTENERS |
| MIL-DTL-83513 Revision G:2008 | Connectors, Electrical, Rectangular, Microminiature, Polarized Shell, General Specification for |
| MIL-DTL-3607 Revision C:2009 | Connectors, Coaxial, Radiofrequency, Series for Pulse, General Specification for |
| SAE AS5929C:2022 | BEARING, ROLLER, NEEDLE, TRACK-ROLLER, CROWN RADIUSED OD, INTEGRAL STUD, TYPE VII, ANTI-FRICTION, CORROSION RESISTANT NITROGEN (CREN) STEEL AND CORROSION RESISTANT (CRES) STEEL, INCH |
| MS3186 Revision G:2011 | CONNECTOR, MOUNTING TO CONNECTORS, MOUNTING NUTS, PLAIN HEXAGON |
| MIL-DTL-14072 Revision F:2013 | FINISHES FOR GROUND BASED ELECTRONIC EQUIPMENT |
| MIL-DTL-45952 Revision A:2014 | PIN, QUICK-RELEASE, DETENT GENERAL SPECIFICATION FOR |
| MIL-DTL-13791-22 Revision A:2016 | MACHINE-PAN HEAD SCREW, CROSS-RECESSED, CARBON STEEL, PROPER PROTECTED COATING PLATED, UNC-2A |
| MIL-STD-1678-1 Revision D:2016 | FIBER OPTIC CABLING SYSTEMS REQUIREMENTS AND MEASUREMENTS - PART 1: DESIGN, INSTALLATION AND MAINTENANCE REQUIREMENTS (PART 1 OF 6 PARTS) |
| MIL-DTL-32139 Revision B:2017 | Connectors, Electrical, Rectangular, Nanominiature, Polarized Shell, General Specification for |
| MIL B 18 : F | BATTERIES, NON-RECHARGEABLE, DRY |
| MIL-DTL-28748 Revision D:2001 | CONNECTOR, PLUG AND RECEPTACLE, RECTANGULAR, RACK AND PANEL SOLDER TYPE AND CRIMP TYPE CONTACTS - GENERAL SPECIFICATION FOR |
| MIL-STD-1353 Revision C:2014 | ELECTRICAL CONNECTORS, PLUG-IN SOCKETS AND ASSOCIATED HARDWARE, SELECTION AND USE OF |
| MIL-DTL-45913 Revision D:2011 | NUTS, SELF-LOCKING, HEXAGON, PREVAILING TORQUE |
| FF-S-85 Revision D:2005 | Screw, Cap, Slotted and Hexagon Head |
| MIL-DTL-32360 Base Document:2010 | STOP LIGHT - TAILLIGHT, VEHICULAR-24 VOLT, SERVICE STOP, SERVICE TAIL, BLACKOUT TAIL |
| MIL-DTL-5099 Revision C:2011 | INDICATOR, CABIN AIR PRESSURE, 1-7/8 INCH DIAL, TYPE MA-1 |
| AA-D-600 Revision D:2000 | DOOR, VAULT, SECURITY |
| MIL-DTL-12133 Revision E:2015 | WASHER, SPRING TENSION, GENERAL SPECIFICATION FOR |
| MIL STD 11991 : A | GENERAL STANDARD FOR PARTS, MATERIALS, AND PROCESSES |
| MIL-DTL-32460-8 Base Document:2013 | FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
| MIL-DTL-83454 Revision B:2016 | TERMINALS, STUD, BLIND PLATE, FOR ELECTRICAL BONDING AND GROUNDING (NONINSULATED) |
| SAE AS 4841 : 2017 | FITTINGS, 37 DEGREES INTERNAL FLARE, FLUID CONNECTION, PROCUREMENT SPECIFICATION |
| MIL-DTL-24308-26 Revision M:2015 | Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack and Panel, Screw-Lock Assembly, Female |
| MS24700 Revision B:2005 | Bushing, Fixed, Connector, Rack and Panel, Miniature |
| MS35759 Revision C:2008 | CUPS, GREASE, AUTOMATIC FEED |
| AN841 Revision 7:2013 | ADAPTER - HOSE TO FLARED TUBE |
| SAE AS 5590 : 2013 | CONNECTORS, FIBER OPTIC, ADVANCED, CIRCULAR OR RECTANGULAR, PLUG AND RECEPTACLE, ENVIRONMENT RESISTANT, REMOVABLE TERMINI/CONTACTS, GENERAL SPECIFICATION FOR |
| MIL-DTL-32464-7 Base Document:2013 | Male Adapter, 45 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MS39207 Revision H:2018 | Elbows, Tube - Safety Sleeve Compression Type, 90 Degree |
| 10/30227763 DC : 0 | BS EN 6114 - AEROSPACE SERIES - BOLT, COUNTERSUNK HEAD, SHORT THREAD - INCH SERIES |
| MS53075 Revision C:2011 | CAP, FUEL TANK TACTICAL VEHICLE, NON-VENTED |
| MIL-DTL-32464-2 Base Document:2013 | Male Adapter, 45 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-45916 Revision C:2014 | INSERT, SCREW THREAD - THREAD CUTTING AND THREAD FORMING |
| SAE AS81934B | BEARINGS, SLEEVE, PLAIN AND FLANGED, SELF-LUBRICATING |
| MIL-DTL-25427 Revision B:2009 | COUPLING ASSEMBLY, HYDRAULIC, SELF SEALING, QUICK DISCONNECT, GENERAL SPECIFICATION FOR |
| MIL-DTL-32464-4 Base Document:2013 | Male Adapter, Tee, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Branch, 1500-3000 PSI |
| MS25221 Revision G:2005 | Guard, Switch, 2 or 3 Position |
| MIL-DTL-21097 Revision H:2017 | Connectors, Electrical, Printed Wiring Board, General Purpose General Specification for |
| MIL-DTL-28731 Revision F:2007 | CONNECTORS, ELECTRICAL, RECTANGULAR, REMOVABLE CONTACT, FORMED BLADE, FORK TYPE (FOR RACK AND PANEL AND OTHER APPLICATIONS) |
| MIL-DTL-25955 Revision A:2004 | CONNECTORS, ELECTRICAL, ENVIRONMENT RESISTING, MINIATURE, WITH SNAP-IN CONTACTS, OR HERMETICALLY SEALED WITH NON-REMOVABLE CONTACTS, GENERAL SPECIFICATION FOR |
| MIL-DTL-83798-5 Revision E:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 45 Degrees |
| MIL-HDBK-510 Revision A:2014 | AEROSPACE FUELS CERTIFICATION |
| AN842 Revision 13:2013 | ELBOW - PIPE TO HOSE, 90 DEGREES |
| BS ISO 7169:2014 | Aerospace. Separable tube fittings for fluid systems, for 24° cones, for pressures up to 3 000 psi or 21 000 kPa. Procurement specification, inch/metric |
| MIL-PRF-1-1718 Revision A:1998 | ELECTRON TUBE, GAS SWITCHING TYPE 8922 |
| MIL-DTL-81716 Revision A:2009 | PACKING, PREFORMED, STRAIGHT THREADED TUBE FITTING BOSS, TYPE 2 HYDRAULIC (-65 DEGREES F TO +275 DEGREES F) |
| MIL-DTL-32464-8 Base Document:2013 | Male Adapter, 90 Degrees Elbow, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| AN844 Revision 13:2013 | ELBOW - PIPE TO HOSE, 45 DEGREES |
| MIL-DTL-24251-3 Revision D:2013 | Shield, Electron Tube, Heat Dissipating 7 and 9 Pin, Miniature (Split Shell) |
| A-A-55538 Revision A:2013 | Waterproof Spark Plug Lead and Conduit Assembly (other than Aircraft) |
| MIL-DTL-55302-38 Revision C:2007 | Connectors, Printed Circuit Subassembly and Accessories: Plug, Electrical, Polarized Shell, Male, .100 Inch Contact Spacing Pin Terminal |
| MS 16842 : H | CLAMP, WIRE ROPE, SADDLED, SINGLE-GRIP, STEEL, TYPE 1 (MALLEABLE-IRON AND STEEL SADDLE) |
| A-A-59440-3 Revision B:2012 | COCK-VALVE, DRAIN, SPRING KEY, BRASS, 50 PSI, WATER, OIL, AND GAS (WOG), NPTF-1 THREADS |
| AN807 Revision 7:2007 | Adapter, Straight, Tube to Hose |
| MIL-DTL-6001 Revision B:2013 | FITTINGS; AIRCRAFT, SOLDER TYPE, TUBE |
| MIL-DTL-52525-13 Revision C:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE STRAIGHT |
| MIL-DTL-38999 Revision M:2015 | Connectors, Electrical, Circular, Miniature, High Density, Quick Disconnect (Bayonet, Threaded or Breech Coupling), Environment Resistant with Crimp Removable Contacts or Hermetically Sealed with Fixed, Solderable Contacts, General Specification for |
| MIL-DTL-32464 Revision A:2017 | FITTINGS, ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES SPHERICAL TO ANPT CONNECTORS, 1500 TO 3000 PSI, GENERAL SPECIFICATION FOR |
| MIL-DTL-32464-10 Base Document:2013 | Male Adapter, Long, Nipple Tube, Hydraulic and Pneumatic Tube, Long Hex, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| DSCC 86092 : B | HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, LEVER ACTUATED, METAL, FOR COLD PLATE MOUNTING |
| SAE AMS 8660 : 2018 | SILICONE COMPOUND NATO CODE NUMBER S-736 |
| MS20760 Revision D:2013 | ADAPTER, STRAIGHT, FLANGE TO TUBE |
| MIL-DTL-32371 Base Document:2012 | Fittings, Adapter, Hydraulic and Pneumatic, Spherical to ORFS Connectors, 1500 to 3000 PSI, General Specification for |
| SAE AS 6450 : 2012(S2019) | LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, POTABLE WATER, HYDRAULIC, AND OTHER FLUID SYSTEMS |
| MIL-DTL-32460-7 Base Document:2013 | FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
| MS27611 Revision H:2018 | VALVE, HYDRAULIC BLEEDER, AIRCRAFT WHEEL BRAKE |
| MIL-DTL-32460-5 Base Document:2013 | FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
| MIL-DTL-32464-5 Base Document:2013 | Male, Adapter, Nipple Tube, Hydraulic and Pneumatic, Regular Hex, 37 Degrees Spherical to NPTF, 1500-3000 PSI |
| SAE AIR 5919 : 2017 | ALTERNATIVES TO CADMIUM PLATING |
| SAE AS 81659 : 2017 | CONNECTORS, ELECTRICAL, RECTANGULAR CRIMP CONTACTS, GENERAL SPECIFICATION FOR |
| SAE AS39901B | BEARINGS, ROLLER, NEEDLE, AIRFRAME, ANTIFRICTION, INCH |
| SAE AS 45909 : 2015 | STUD, LOCKED IN, RING LOCKED, SERRATED, GENERAL SPECIFICATION FOR |
| SAE AS18280F | FITTINGS, 24 DEGREES CONE FLARELESS, FLUID CONNECTION, 3000 PSI |
| NASM24694:2012 | SCREW, MACHINE, FLAT COUNTERSUNK HEAD, 100 DEGREES, STRUCTURAL, CROSS RECESSED, UNC-3A AND UNF-3A |
| MIL-DTL-5015 Revision H:2000 | CONNECTORS, ELECTRICAL, CIRCULAR THREADED, AN TYPE - GENERAL SPECIFICATION FOR |
| MIL-DTL-45932 Revision A:2015 | INSERT, SCREW THREAD, THIN WALL, LOCKED IN: GENERAL SPECIFICATION FOR |
| SAE AS 82819 : 2013 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 300 CPM OSCILLATION (13 FPM), -65 TO +160 DEGREES F (-54 TO +71 DEGREES C), LINERS LESS THAN 0.015 INCHES |
| MIL-DTL-52525-5 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, Straight |
| NASM 21059 : 2002 | NUT, SELF-LOCKING, PLATE, TWO LUG, FLOATING, LOW HEIGHT STEEL, 125 KSI FTU, 450 DEGREES F |
| MIL-DTL-52525-34 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 4-BOLT SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-52525-2 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 45 Degree Bent Tube |
| DOD-W-63546 Revision A:1982 | WASHER, KEY, METRIC GENERAL SPECIFICATION FOR |
| MIL-DTL-18866 Revision J:2015 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, General Specification for |
| MS39202 Revision G:2012 | ELBOWS, PIPE TO TUBE - SAFETY SLEEVE COMPRESSION TYPE, 90 DEGREE, MALE PIPE END |
| MS39201 Revision G:2012 | Nipple, Tube-Safety Sleeve Compression Type |
| MS27769 Revision B:2011 | PLUG, PIPE, COUNTERSUNK HEX HEAD |
| MIL-DTL-26482 Revision H:2007 | Connectors, Electrical, Circular, Miniature, Quick Disconnect, Environment Resisting, Receptacles and Plugs, General Specification for |
| FF-C-450 Revision G:2017 | CLAMPS, WIRE ROPE |
| MIL-HDBK-510-1 Revision A:2010 | AEROSPACE FUELS CERTIFICATION |
| SAE AS 18280/1 : 2017 | SLEEVE, BITE TYPE, 24 DEGREE CONE FLARELESS FITTING, 3000 PSI |
| MIL-DTL-32460-1 Base Document:2013 | FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
| MS20762 Revision D:2016 | ELBOW, FLARED TUBE, FLANGED, SWIVEL, 90 DEGREES |
| MIL-DTL-6193 Revision E:2017 | JOINTS, UNIVERSAL, PLAIN, LIGHT AND HEAVY DUTY, GENERAL SPECIFICATION FOR |
| MS24361 Revision C:2016 | RING, SPLIT - TYPE MA-2, FLIGHT PRESSURE REFUELING, RECEPTION COUPLING |
| MS51868 Revision E:2017 | CLAMP, WIRE ROPE, DOUBLE SADDLED, DOUBLE-GRIP, STEEL, TYPE 3 |
| MS39324 Revision C:2017 | ADAPTER, 37 DEGREE, FLARE TO 'O' RING BOSS, 45 DEGREE FLARE |
| MIL-DTL-70337 Revision A:2015 | RING, RETAINING, ROUND SECTION |
| MIL-DTL-8348 Revision K:2008 | Gage Assemblies, Air Pressure, Dial Indicating Chuck Type, Self-Contained |
| MIL-DTL-32373 Base Document:2011 | Plug, Machine Thread, Magnetic: Drain |
| MS51842 Revision E:2017 | ELBOW, TUBE TO BOSS 45 DEGREE, O-RING, FLARELESS TYPE, HYDRAULIC |
| MS28760 Revision E:2007 | Fitting End, Straight, Attachable, Hydraulic and Pneumatic, High Pressure Hose 3000 PSI, Flared Tube |
| MIL-DTL-24251-4 Revision D:2013 | RETAINER (BASE),AND ADAPTER, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE |
| MIL-DTL-6807 Revision F:2012 | Switches, Rotary, Selector Power, General Specification for |
| MIL-DTL-62011-1 Base Document:2009 | PUMP, FUEL, ELECTRICALLY-OPERATED: 24-VOLT DC, IN-TANK TYPE, TOP-MOUNTED CONNECTOR, TYPE 1 |
| 10/30227764 DC : 0 | BS EN 6115 - AEROSPACE SERIES - BOLT - PROTRUDING HEAD, SHORT THREAD - INCH SERIES |
| MIL-DTL-32460-6 Base Document:2013 | FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
| MIL-DTL-32460 Revision A:2017 | ADAPTER, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE TUBE FITTING TO ORFS CONNECTORS, 1500 TO 3000 PSI AND -65 DEGREES F TO 250 DEGREES F, GENERAL SPECIFICATION FOR |
| MIL-DTL-83796-1 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE |
| MIL-DTL-83798 Revision D:2008 | FITTING, RUBBER HOSE, LIGHTWEIGHT, MEDIUM PRESSURE, GENERAL SPECIFICATION FOR |
| A-A-55563 Revision D:2013 | Holder, Electrical Card, Metal Card Guide, General Requirements for |
| MIL-DTL-52525-38 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 45 DEGREES BENT TUBE |
| MIL-DTL-5675 Revision C:2005 | Shackle: Cable, Aircraft |
| MIL-DTL-83796-13 Base Document:2008 | Hose Assembly, Rubber, Lightweight, Medium Pressure, Internal Support Coil, Field Attachable End Fittings, Flareless to Flareless, with Lockwire Hole |
| MS51512 Revision D:2017 | TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, 37 DEGREE FLARED |
| MIL-DTL-52525-3 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Short Drop |
| MS51531 Revision B:1985 | NUT, TUBE COUPLING, 37 DEGREE FLARED |
| MS39322 Revision B:2017 | ADAPTER: 37 DEGREE FLARE, FEMALE SWIVEL TO WELD SOCKET, 3/4 INCH TO 1 INCH |
| MIL-DTL-32464-11 Base Document:2013 | Male Adapter, Bulkhead, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-55181 Revision F:2012 | CONNECTORS, PLUG AND RECEPTACLE, INTERMEDIATE POWER (ELECTRICAL, WATERPROOF), TYPE MW, GENERAL SPECIFICATION FOR |
| MIL-DTL-27235 Revision B:2014 | Pin, Straight, Headed (Clevis Pins) |
| MS51533 Revision A:1979 | SLEEVE, COMPRESSION, TUBE FITTING, 37 DEGREE FLARED |
| MS35645 Revision G:2011 | CAP, FUEL TANK: TACTICAL VEHICLE, FORDING |
| MS51526 Revision A:1979 | ADAPTER, STRAIGHT, TUBE TO BOSS, O-RING, 37 DEGREE FLARED (LONG) |
| MIL-STD-870 Revision C:2007 | Cadmium Plating, Low Embrittlement, Electrodepositon |
| MIL-DTL-12520 Revision D:2005 | Connectors, Plug and Receptacle (Electrical, Waterproof), and Accessories; General Specification for |
| MIL-DTL-2 Revision G:2006 | VALVES, CYLINDER, GAS (FOR COMPRESSED OR LIQUEFIED GASES), GENERAL SPECIFICATION FOR |
| FF-C-450-1 Revision B:2017 | CLAMP, WIRE ROPE, DOUBLE-GRIP, STEEL, DOUBLE SADDLED, TYPE 2 |
| MIL-DTL-24308-25 Revision K:2008 | Connectors, Electric, Rectangular, Miniature, Polarized Shell, Rack and Panel, Screw-Lock Assembly, Male |
| ISO 9216:2002 | Aerospace — Nuts, hexagonal, slotted (castellated), for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses |
| MS24120 Revision E:2004 | RING, COUPLING, ROTATING |
| MS51530 Revision B:1988 | FITTINGS, HYDRAULIC TUBE, FLARED, 37 DEGREE AND FLARELESS, STEEL; TEE, TUBE TO BOSS, BOSS ON RUN, O-RING, 37 DEGREE FLARED |
| MS20756 Revision F:2011 | FLANGE, SWIVEL, RETAINING |
| SAE AS81819A | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, HIGH SPEED OSCILLATION -65 TO +160 DEGREES F GENERAL SPECIFICATION FOR |
| MIL-DTL-32372-11 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Male to ORFS Female Swivel to NPTF Male on Branch |
| MIL-DTL-52525-9 Revision C:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
| MIL-DTL-83796-3 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
| MS20761 Revision C:2016 | ELBOW, FLARED TUBE, FLANGED, SWIVEL, 45 DEGREES |
| MIL-DTL-55302-102 Revision E:2006 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, STRAIGHT-THRU, HERMAPHRODITIC CONTACT, CRIMP REMOVABLE, FOR PRINTED WIRING BOARDS (.100 INCH SPACING) |
| MIL-DTL-24211 Revision D:2016 | GASKETS, WAVEGUIDE FLANGE, GENERAL SPECIFICATION FOR |
| AN914 Revision 11:2012 | ELBOW, PIPE, INTERNAL AND EXTERNAL THREAD, 90 DEGREES |
| MIL-DTL-25308 Revision C:2010 | GAGE, PRESSURE, DIAL INDICATING, HYDRAULIC, TYPE ME-1 |
| SAE AS19692B | Aerospace – Military Type Variable Delivery, Pressure Compensated Hydraulic Pump |
| SAE AS85049D | CONNECTOR ACCESSORIES, ELECTRICAL GENERAL SPECIFICATION FOR |
| SAE AS8914B | BEARING, ROLLER, SELF-ALIGNING, AIRFRAME, ANTIFRICTION |
| SAE AS 81703 : 2012 | CONNECTORS, ELECTRIC, CIRCULAR, MINIATURE, RACK AND PANEL OR PUSH-PULL COUPLING, ENVIRONMENT RESISTING |
| SAE AS 4842 : 2016 | FITTINGS AND BOSSES, PIPE THREADED, FLUID CONNECTION |
| NASA KSC DE 512-SM : 2012 | FACILITY SYSTEMS, GROUND SUPPORT SYSTEMS, AND GROUND SUPPORT EQUIPMENT GENERAL DESIGN REQUIREMENTS |
| MIL-DTL-13791 Revision H:2015 | DISTRIBUTOR, IGNITION SYSTEM: INTEGRAL COIL, WATERPROOF 24 VOLT |
| MIL-DTL-52525-17 Revision C:2008 | FITTINGS, CLAMP-HALVES, FLANGE TO PORT, FOR 4-BOLT SPLIT-FLANGE |
| MIL-DTL-45910 Revision D:2015 | INSERT, SCREW THREAD-LOCKED IN AND RING LOCKED, SERRATED GENERAL SPECIFICATION FOR |
| DSCC 88052 : D | HOLDER, ELECTRICAL CARD, CARD GUIDE-RETAINER, SCREW ACTUATED, METAL |
| MIL-DTL-28840 Revision D:2013 | CONNECTORS, ELECTRICAL, CIRCULAR, THREADED, HIGH SHOCK, HIGH DENSITY, SHIPBOARD, CLASS D, GENERAL SPECIFICATION FOR |
| MIL-DTL-52525-40 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, STRAIGHT |
| MIL-DTL-52525-31 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL |
| MIL-DTL-22442-32 Revision C:2005 | Cable Assembly, Aircraft Audio, Associated Parts |
| MIL-DTL-21248 Revision D:2015 | Ring, Retaining (Tapered and Reduced Section Type) |
| MIL-DTL-52525 Revision F:2008 | FITTINGS, HOSE, HYDRAULIC, REUSABLE, FIELD-ATTACHABLE AND CLAMP-HALVES, TO MATE WITH SAE-J517 TYPE HOSES, GENERAL SPECIFICATION FOR |
| MIL-DTL-55302-42 Revision C:2007 | CONNECTORS, PRINTED CIRCUIT SUBASSEMBLY AND ACCESSORIES: RECEPTACLE, ELECTRICAL, POLARIZED SHELL, FEMALE, .100 INCH CONTACT SPACING, REMOVABLE CRIMP CONTACTS |
| I.S. EN 6101:2016 | AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
| MIL-DTL-32480-2 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MIL-DTL-83723 Revision H:2016 | CONNECTORS, ELECTRICAL, CIRCULAR, ENVIRONMENT RESISTING AND HERMETICALLY SEALED, RECEPTACLES AND PLUGS, GENERAL SPECIFICATION FOR |
| MIL-DTL-12520-11 Revision B:2005 | Connectors, Receptacle, Electrical Waterproof (Shelf Size 26, Female Inserts) |
| MIL-DTL-24308 Revision G:2009 | Connectors, Electric, Rectangular, Nonenvironmental, Miniature, Polarized Shell, Rack and Panel, General Specification for |
| MS28761 Revision C:2007 | Fitting End, Straight, Attachable, Hydraulic, High Pressure Hose 3000 PSI, Flareless Tube |
| MIL-DTL-32480-8 Base Document:2014 | Fitting, Adapter, 45 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32460-4 Base Document:2013 | FITTING, ADAPTER, STRAIGHT, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS BULKHEAD |
| NASM 20613 : 2005 | RIVET, SOLID, UNIVERSAL HEAD, STEEL, CARBON AND STEEL, CORROSION-RESISTANT |
| MS51522 Revision C:2017 | ELBOW, TUBE, 45 DEGREE SWIVEL, 37 DEGREE FLARED |
| SAE AS4941B | AEROSPACE - GENERAL REQUIREMENTS FOR COMMERCIAL AIRCRAFT HYDRAULIC COMPONENTS |
| MIL-DTL-32372-5 Revision A:2017 | Fitting, Adapter, 45 Degree, Hydraulic and Pneumatic, NPTF Male to ORFS Bulkhead |
| MS25224 Revision H:2006 | GUARD, SWITCH, 2 POSITION |
| MIL-DTL-45918 Revision A:2009 | CLEVISES AND CONNECTORS (ROD END) |
| MIL-DTL-32464-3 Base Document:2013 | Male Adapter, 90 Degrees Elbow, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 1500-3000 PSI |
| MIL-DTL-24251-6 Revision E:2013 | SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (RETROFIT TYPE ONLY) |
| MIL-DTL-27599 Revision E:2016 | CONNECTORS, ELECTRICAL, CIRCULAR, MINIATURE, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTANT, SOLDER CONTACTS, GENERAL SPECIFICATION FOR |
| MIL-DTL-55422 Revision B:2011 | CLIP, ELECTRICAL, GRID AND ANODE, GENERAL SPECIFICATION FOR |
| MIL-DTL-32372-10 Revision A:2017 | Fitting, Adapter, Tee, Hydraulic and Pneumatic, ORFS Female Run to Run to NPTF Male on Branch |
| MS75028 Revision K:2005 | SWITCH, TOGGLE, ONE POLE, UNSEALED |
| ISO 9217:2002 | Aerospace — Washers, chamfered, with counterbore, for pulleys, in alloy steel and cadmium plated or in corrosion-resistant steel and passivated — Dimensions and masses |
| 16/30354035 DC : 0 | BS EN 4854-2 - AEROSPACE SERIES - BEARINGS, SPHERICAL PLAIN, IN CORROSION RESISTING STEEL WITH SELF-LUBRICATING LINER, LOW STARTING TORQUE AND LOW FRICTION COEFFICIENT, ELEVATED DUTY CYCLES UNDER LOW OSCILLATIONS AT DIFFERENT OPERATING CONDITIONS, WIDE SERIES - DIMENSIONS AND LOADS |
| MS25034 Revision K:2006 | GUARD, SWITCH, 3 POSITION |
| MIL-STD-171 Revision F:2011 | FINISHING OF METAL AND WOOD SURFACES |
| MIL-PRF-29602 Revision A:2005 | CLEANING COMPOUNDS, PARTS WASHER AND SPRAY CABINET |
| MIL-DTL-5070 Revision F:2006 | ADAPTER, HOSE TO TUBE, PIPE AND FLANGE, REUSABLE - HYDRAULIC, FUEL, AND OIL LINES, GENERAL SPECIFICATION FOR |
| MIL-DTL-32480-3 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless Male to ORFS Male |
| MS27752 Revision D:2006 | GUARD, SWITCH, 3 POSITION |
| MS24417 Revision K:2005 | GUARD, SWITCH, 2 OR 3 POSITION |
| MIL-DTL-52471-8 Revision B:2008 | Hose Assemblies, Rubber: Hydraulic Pressure-Type; Type 100RE |
| SAE AS 5528 : 2016 | LUBRICANT APPLICATION, SOLID FILM, HEAT CURED, CORROSION INHIBITING |
| MIL-DTL-8789 Revision G:2015 | FITTING END, ATTACHABLE, HYDRAULIC, HIGH PRESSURE (3,000 PSI), GENERAL SPECIFICATION FOR |
| MIL-DTL-32460-9 Base Document:2013 | FITTING, ADAPTER, 90 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS, FEMALE SWIVEL |
| AN848 Revision 13:2015 | Elbow, Hose, 90 Degree |
| AN 840 : 0011 | ADAPTER, STRAIGHT, PIPE TO HOSE |
| MIL-DTL-32464-9 Base Document:2013 | Male Adapter, Tee, Bulkhead, Hydraulic and Pneumatic Tube, 37 Degrees Spherical to ANPT, 37 Degrees Spherical on Run, 1500-3000 PSI |
| MS51818 Revision E:1987 | TEE, PIPE TO TUBE, MALE PIPE ON BRANCH, FLARELESS TYPE, HYDRAULIC |
| AN 839 : 0009 | ELBOW, TUBE TO HOSE, 45 DEGREES |
| MIL-DTL-32371-1 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Straight |
| MIL-DTL-52525-16 Revision D:2008 | FITTINGS, CLAMP-HALVES, FOR 4-BOLT SPLIT-FLANGE, SAE-J518, TYPE SPLIT-FLANGE CLAMP (SFC) |
| MIL-DTL-52471-2 Revision C:2008 | HOSE ASSEMBLIES, RUBBER: HYDRAULIC PRESSURE-TYPE; TYPE 100R2, DOUBLE-WIRE BRAIDED REINFORCEMENT HOSE |
| MIL-DTL-52525-37 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, STRAIGHT |
| MIL-DTL-52471-3 Revision C:2008 | HOSE ASSEMBLIES, RUBBER, HYDRAULIC PRESSURE-TYPE, TYPE 100RE, FOUR-WIRE BRAIDED REINFORCEMENT OR MULTIPLE WIRE BRAIDED STEEL WIRE REINFORCED HOSE |
| MIL-DTL-21617-29 Base Document:2003 | CONNECTOR, RECEPTACLE ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, BACK SHELLS |
| MS51841 Revision E:2017 | TEE, TUBE TO BOSS, BOSS ON BENCH, O-RING, FLARELESS TYPE, HYDRAULIC |
| SAE ARP 1070E : 2019 | DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
| SAE AS 81582 : 2017 | CONNECTORS, ELECTRICAL, BAYONET COUPLING, ENVIRONMENT RESISTING, UMBILICAL, GENERAL SPECIFICATION FOR |
| SAE ARP1070D | DESIGN AND TESTING OF ANTISKID BRAKE CONTROL SYSTEMS FOR TOTAL AIRCRAFT COMPATIBILITY |
| SAE AMS3167B | SOLVENTS, WIPE FOR CLEANING PRIOR TO APPLICATION OF PRIMER AND TOP COAT MATERIALS, OR SEALING COMPOUNDS |
| ISO 7169:2014 | Aerospace Separable tube fittings for fluid systems, for 24 degree cones, for pressures up to 3 000 psi or 21 000 kPa Procurement specification, inch/metric |
| PREN 6101 : 200P2 | AEROSPACE SERIES - RIVET, 100 DEGREES MEDIUM FLUSH HEAD, CLOSE TOLERANCE - INCH SERIES |
| BS EN 6101:2016 | Aerospace series. Rivet, 100° medium flush head, close tolerance. Inch series |
| FF-S-1362 Revision A:2014 | STUD, PLAIN, GENERAL PURPOSE |
| MIL-DTL-9398 Revision D:2007 | GENERATOR, TACHOMETER, TWO-POLE, HIGH TEMPERATURE, AIRCRAFT |
| EN 6101:2016 | Aerospace series - Rivet, 100° medium flush head, close tolerance - Inch series |
| MS51517 Revision C:2017 | CROSS, TUBE, 37 DEGREE FLARED |
| MIL-DTL-32372-1 Revision A:2017 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MIL-DTL-28748-16 Base Document:2004 | Connectors, Electrical, Hexagonal, Rack and Panel, Miniature, Plug-Receptacle, Female Solder Cup Pin Contacts, Size 20 |
| MIL-DTL-32480-9 Base Document:2014 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, Flareless, Male to ORFS, Female Swivel |
| MIL-DTL-32371-5 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, Union Cross, Spherical on Branch |
| MIL-DTL-32371-7 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow, Bulkhead |
| MS51500 Revision F:2017 | FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ADAPTER, STRAIGHT, PIPE TO TUBE, MALE END, 37 DEGREE FLARED |
| MIL-DTL-3992 Revision F:2007 | HOSE AND HOSE ASSEMBLY, RUBBER, AIR AND VACUUM BRAKE, SYSTEMS |
| MS51505 Revision C:2016 | ELBOW, TUBE, 90 DEGREE, 37 DEGREE FLARED |
| MIL-DTL-25867 Revision D:2006 | GAGE, PRESSURE, DIAL INDICATING, PNEUMATIC |
| DSCC 85020 : G | HOLDER, ELECTRICAL CARD, CARD GUIDE, METAL, WITHOUT FLARED ENTRY |
| MS27612 Revision M:2013 | ADAPTER, HYDRAULIC BLEEDER VALVE, AIRCRAFT WHEEL BRAKE |
| MIL-DTL-32480-4 Base Document:2014 | Fitting, Adapter, Straight, Hydraulic and Pneumatic, Flareless Male to ORFS Bulkhead |
| MIL-DTL-52525-45 Base Document:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 90 DEGREES BENT TUBE |
| DSCC 85021 : C | HOLDER, ELECTRICAL CARD, CARD GUIDE, METAL, WITH FLARED ENTRY |
| MS51513 Revision D:2017 | TEE, PIPE TO TUBE, FEMALE PIPE ON BRANCH, 37 DEGREE FLARED |
| MIL-DTL-52525-8 Revision C:2008 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 DegreeBent Tube, Long Drop |
| MIL-DTL-32371-2 Base Document:2012 | Fittings, Hydraulic Tube, Spherical to ORFS, Male Adapter, 45 Degrees Elbow |
| MS51506 Revision E:2017 | FITTINGS, HYDRAULIC TUBE, FLARED 37 DEGREE AND FLARELESS, ELBOW, PIPE TO TUBE, 90 DEGREE, FEMALE PIPE END, 37 DEGREE FLARED |
| MS51527 Revision D:2000 | Fittings, Hydraulic Tube, Flared, 37 Degree and Flareless, Steel; Elbow, Tube to Boss, 90 Degree, O-Ring, 37 Degree Flared |
| MIL-DTL-52525-39 Revision B:2008 | FITTINGS, HOSE, SCREW-ON TO 37DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE |
| MS39325 Revision C:2006 | HOSE ASSEMBLIES; AIR (TYPE 1) AND VACUUM (TYPE 2) BRAKE 3/8 INCH NOMINAL DIAMETER |
| MS51815 Revision F:1987 | ELBOW PIPE TO TUBE 90 DEGREE, MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
| MS39323 Revision C:2017 | FITTING, TUBE, REDUCER: 37 DEGREE FLARE |
| MS51523 Revision C:2017 | TEE, TUBE TO SWIVEL, SWIVEL ON RUN, 37 DEGREE FLARED |
| MIL-DTL-52525-14 Revision C:2008 | FITTINGS, HOSE CRIMP TYPE, SPLIT-FLANGE 45 DEGREES BENT |
| MIL-DTL-83796-12 Base Document:2008 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, INTERNAL SUPPORT COIL, FIELD ATTACHABLE END FITTINGS, FLARELESS TO FLARELESS |
| MIL-DTL-21617 Revision B:2012 | CONNECTORS, PLUG AND RECEPTACLE, ELECTRICAL, RECTANGULAR, POLARIZED SHELL, MINIATURE TYPE, GENERAL SPECIFICATION FOR |
| MS51511 Revision D:2017 | TEE, PIPE TO TUBE, MALE PIPE ON RUN, 37 DEGREE FLARED |
| MS51812 Revision F:1987 | NIPPLE, TUBE, BULKHEAD, FLARELESS TYPE HYDRAULIC |
| MS51515 Revision D:2017 | TEE, TUBE, BULKHEAD ON BRANCH, 37 DEGREE FLARED |
| MIL-DTL-52525-42 Revision B:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE 90 DEGREES BENT |
| MIL-DTL-52525-41 Revision A:2008 | FITTINGS, HOSE, CRIMP TYPE, SPLIT-FLANGE, 45 DEGREES BENT TUBE |
| MS51817 Revision E:1987 | ELBOW, PIPE TO TUBE, 45 DEGREE MALE PIPE END, FLARELESS TYPE, HYDRAULIC |
| MS51820 Revision E:1987 | ELBOW, TUBE, 90 DEGREE, FLARELESS TYPE, HYDRAULIC |
| MS51518 Revision C:2017 | PLUG, MACHINE THREAD, 37 DEGREE FLARED |
| MS51813 Revision E:1987 | ELBOW, PIPE TO TUBE 90 DEGREE, FEMALE PIPE END, FLARELESS TYPE, HYDRAULIC |
| SAE AS 4875 : 2016 | FITTINGS, STRAIGHT THREADED BOSS OR FLANGED, FLUID CONNECTION |
| MIL-DTL-83798-2 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 45 Degrees |
| MIL-DTL-52525-12 Revision D:2011 | Fittings, Hose, Screw on to Split-Flange 90 Degree Bent |
| MIL-DTL-32460-2 Base Document:2013 | FITTING, ADAPTER, 45 DEGREES ELBOW, HYDRAULIC AND PNEUMATIC, 37 DEGREES FLARE, MALE TO ORFS MALE |
| MIL-DTL-52525-33 Revision A:2008 | FITTINGS, WIRE REINFORCED HYDRAULIC HOSE AND CLAMP-HALVES: FIELD ATTACHABLE (REUSABLE), SCREW-ON TO 37 DEGREES FLARE FEMALE SWIVEL, 90 DEGREES BENT TUBE, FOR USE WITH TYPE 100RE FOUR-SPRIAL-WRAP REINFORCEMENT HOSE |
| SAE AS7949B | BEARINGS, BALL, AIRFRAME, ANTIFRICTION, GENERAL STANDARD |
| MIL-DTL-24251-5 Revision D:2013 | SHIELD, ELECTRON TUBE, HEAT DISSIPATING, 7 AND 9 PIN, MINIATURE (OPEN SIDES) |
| MIL-DTL-3390 Revision H:2011 | RINGS, DEE |
| MS 16843 : H | CLAMP, WIRE ROPE (DOUBLE GRIP), THREADED, STEEL, TYPE 4 |
| MS25214 Revision G:2010 | GUARD, SWITCH, 3 POSITION |
| SAE AS 81511 : 2016 | CONNECTORS, ELECTRICAL, CIRCULAR, HIGH DENSITY, QUICK DISCONNECT, ENVIRONMENT RESISTING AND ACCESSORIES, GENERAL SPECIFICATION FOR |
| MIL-DTL-52525-4 Revision D:2011 | Fittings, Hose, Screw-on to 37 Degree Flare Female Swivel, 90 Degree Bent Tube, Long Drop |
| MIL-DTL-62011 Revision E:2009 | Pump, Fuel, Electrically-Operated: 24-Volt DC, In-Tank Type, General Specification for |
| MIL-DTL-83798-6 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flareless, Swivel Nut, 90 Degrees |
| MIL-DTL-25677 Revision G:2016 | ADAPTER, CAP, AND NOZZLE, PRESSURE LUBRICATING OIL SERVICING, AIRCRAFT, GENERAL SPECIFICATION FOR |
| MIL-DTL-83413-6 Revision C:2008 | CONNECTORS AND ASSEMBLIES, ELECTRICAL, AIRCRAFT GROUNDING: RECEPTACLES, TWO PIECE, WITH INSERTS AND HOUSINGS |
| MIL-DTL-32372-3 Revision A:2017 | Fitting, Adapter, 90 Degree Elbow, Hydraulic and Pneumatic, NPTF Male to ORFS Male |
| MIL-PRF-32587 Base Document:2018 | Remover, Paint, Hap-Free, Neutral |
| MS51504 Revision C:2016 | ELBOW, PIPE TO TUBE, 90 DEGREE MALE PIPE END, 37 DEGREE FLARED |
| MS25223 Revision H:2005 | GUARD, SWITCH, 3 POSITION |
| MIL-DTL-25866 Revision C:2010 | LIGHT, EMERGENCY EXIT, AIRCRAFT LEU-1/A |
| MIL-DTL-5003 Revision E:2010 | FLOODLIGHT SET, ELECTRIC, TRIPOD-MOUNTED, FOUR 150-WATT FLOODLIGHTS |
| MS25452 Revision H:2010 | Guard, Switch, 2 Position, Lock |
| MIL-DTL-83796-2 Revision C:2014 | HOSE ASSEMBLY, RUBBER, LIGHTWEIGHT, MEDIUM PRESSURE, FIELD ATTACHABLE END FITTINGS, FLARE TO FLARE, WITH LOCKWIRE HOLE |
| MIL-DTL-83798-1 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, Straight |
| MIL-DTL-3643 Revision B:2003 | Connectors, Coaxial, Radio Frequency, Series HN, and Associated Fittings, General Specification for |
| MIL-DTL-83798-3 Revision D:2017 | Fittings, Rubber Hose, Lightweight, Medium Pressure, Flared, Swivel Nut, 90 Degrees |
| MIL-DTL-12520-10 Revision B:2005 | Connectors, Receptacle, Electrical Waterproof (Shell Size 26, Male Inserts) |
| SAE AS 4843 : 2016 | FITTINGS, BEADED, FLUID CONNECTION |
| SAE AS 83819 : 2013 | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, 1400 CPM (15 FPM), OSCILLATION, -65 TO +160 DEGREES F (-54 TO +71 DEGREES C) |
| SAE AIR 4789 : 2016 | AEROSPACE INFORMATION REPORT ON EVALUATING CORROSION TESTING OF ELECTRICAL CONNECTORS AND ACCESSORIES FOR THE PURPOSE OF QUALIFICATION |
| NASM 21083 : 2004 | NUT, SELF-LOCKING, HEXAGON, NON-METALLIC INSERT, LOW HEIGHT, 250 DEGREES F |
| MIL-STD-1568 Revision D:2015 | Materials and Processes for Corrosion Prevention and Control in Aerospace Weapons Systems |
| SAE AMS2451/4C | PLATING, BRUSH, CADMIUM CORROSION PROTECTIVE, LOW HYDROGEN EMBRITTLEMENT |
| SAE AS81820D | BEARINGS, PLAIN, SELF-ALIGNING, SELF-LUBRICATING, LOW SPEED OSCILLATION |
| SAE AS5169C:2021 | FITTING, PORT PLUG AND BLEEDER<br> |
| PREN 6131 : 200P3 | AEROSPACE SERIES - COMPOSITE CLIP NUT, SELF LOCKING |
| PREN 6118 : DRAFT 2016 | AEROSPACE SERIES - PROCESS SPECIFICATION - ALUMINIUM BASE PROTECTION FOR FASTENERS |
| MIL-DTL-5002 Revision E:2011 | SURFACE TREATMENTS AND INORGANIC COATINGS FOR METAL SURFACES OF WEAPONS SYSTEMS |
| NASM1312-1:2010 | FASTENER TEST METHODS - METHOD 1 SALT SPRAY |
| MIL-STD-1916 Base Document:1996 | DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT |
| SAE AMS2750E | PYROMETRY |
| NASM1312-14:1997 | FASTENER TEST METHODS METHOD 14 STRESS DURABILITY, INTERNALLY THREADED |
| ASTM B 567 : 1998 | Standard Test Method for Measurement of Coating Thickness by the Beta Backscatter Method |
| NASM1312-5:2012 | FASTENER TEST METHODS METHOD 5 STRESS DURABILITY |
| TT-C-490 Revision F:2013 | CHEMICAL CONVERSION COATINGS AND PRETREATMENTS FOR METALLIC SUBSTRATES (BASE FOR ORGANIC COATINGS) |
| NASM 1312-12 : 1997 | FASTENER TEST METHODS, METHOD 12, THICKNESS OF METALLIC COATINGS |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.