• UNE-EN 61287-1:2015

    Current The latest, up-to-date edition.

    Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods

    Available format(s):  Hardcopy, PDF

    Language(s):  Spanish, Castilian, English

    Published date:  04-02-2015

    Publisher:  Asociacion Espanola de Normalizacion

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    1 Scope
    2 Normative references
    3 Terms and definitions
      3.1 Definitions related to equipment
      3.2 Definitions related to electrical parameters
    4 Common clauses
      4.1 General
      4.2 Service conditions
      4.3 Characteristics
      4.4 Technical requirements
      4.5 Tests
    5 Direct traction convertors
      5.1 Line-commutated convertors for d.c. motors
      5.2 Choppers for d.c. motors
      5.3 Multiphase convertors for a.c. motors (inverters)
    6 Indirect traction convertors
      6.1 Line convertor
      6.2 Motor convertor
    7 Auxiliary convertors
      7.1 Characteristics
      7.2 Short-circuit protection
      7.3 Choice of rated insulation voltage
      7.4 Tests
    8 Semiconductor drive units (SDU)
      8.1 Equivalent expressions
      8.2 Printed circuit board assemblies
      8.3 Function of the SDU
      8.4 Particular requirements for the SDU
      8.5 Service conditions
      8.6 Insulation requirements for the SDU
      8.7 Electromagnetic compatibility requirements
      8.8 Tests of the SDU
    Annex A (normative) Arrangement of basic circuit diagrams
    Annex B (informative) Recapitulation of agreements between
             the manufacturer and the user
    Annex C (normative) Minimum clearances in air based on the
             rated impulse voltage U[ni]
    Annex D (normative) Minimum creepage distances for low values
             of rated insulation voltage U[nm] for materials other
             than printed wiring material
    Annex E (normative) Definition of pollution degrees
    Annex F (normative) Dielectric tests for equipment -
             Short-duration power-frequency (a.c.) test levels
             U[a] (kV r.m.s.) based on the rated impulse voltage
             U[Ni] (kVcr)
    Annex G (normative) Rated impulse voltages U[Ni] for circuits
             powered by the contact line
    Annex H (informative) Guidelines for magnetic field and induced
             voltage requirements
    Annex ZA (normative) Normative references to international
             publications with their corresponding European
             publications

    Abstract - (Show below) - (Hide below)

    Applicable to power electronic convertors mounted on board railway rolling-stock and intended for supplying traction circuits and auxiliary circuits of power vehicles, coaches and trailers.

    General Product Information - (Show below) - (Hide below)

    Committee CTN 203/SC 9X
    Development Note Supersedes UNE EN 50207. (10/2008)
    Document Type Standard
    Publisher Asociacion Espanola de Normalizacion
    Status Current
    Supersedes

    Standards Referencing This Book - (Show below) - (Hide below)

    IEC 60112:2003+AMD1:2009 CSV Method for the determination of the proof and the comparative tracking indices of solid insulating materials
    IEC 60270:2000+AMD1:2015 CSV High-voltage test techniques - Partial discharge measurements
    IEC 62236-3-1:2008 Railway applications - Electromagnetic compatibility - Part 3-1: Rolling stock - Train and complete vehicle
    IEC 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
    IEC 60050-702:1992 International Electrotechnical Vocabulary (IEV) - Part 702: Oscillations, signals and related devices
    EN 60349-1:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 1: Machines other than electronic converter-fed alternating current motors
    IEC 61373:2010 Railway applications - Rolling stock equipment - Shock and vibration tests
    IEC 60322:2001 Railway applications - Electric equipment for rolling stock - Rules for power resistors of open construction
    IEC 60050-811:1991 International Electrotechnical Vocabulary (IEV) - Part 811: Electric traction
    IEC 60050-151:2001 International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices
    EN 61373:2010/AC:2017-09 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - SHOCK AND VIBRATION TESTS (IEC 61373:2010)
    IEC 61148:2011 Terminal markings for valve device stacks and assemblies and for power conversion equipment
    EN 60721-3-5 : 1997 CLASSIFICATION OF ENVIRONMENTAL CONDITIONS - PART 3: CLASSIFICATION OF GROUPS OF ENVIRONMENTAL PARAMETERS AND THEIR SEVERITIES - SECTION 5: GROUND VEHICLE INSTALLATIONS
    IEC 60076-10:2016 Power transformers - Part 10: Determination of sound levels
    IEC 60721-3-5:1997 Classification of environmental conditions - Part 3: Classificationof groups of environmental parameters and their severities -Section 5: Ground vehicle installations
    EN 61148 : 2012 TERMINAL MARKINGS FOR VALVE DEVICE STACKS AND ASSEMBLIES AND FOR POWER CONVERSION EQUIPMENT (IEC 61148:2011)
    IEC 60384-1:2016 Fixed capacitors for use in electronic equipment - Part 1: Generic specification
    IEC 60850:2014 Railway applications - Supply voltages of traction systems
    IEC 60050-551:1998 International Electrotechnical Vocabulary (IEV) - Part 551: Power electronics
    EN 60384-4:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE (IEC 60384-4:2016)
    EN 60270:2001/A1:2016 HIGH-VOLTAGE TEST TECHNIQUES - PARTIAL DISCHARGE MEASUREMENTS (IEC 60270:2000/A1:2015)
    IEC 61377-2:2002 Railway applications - Rolling stock - Combined testing - Part 2: Chopper-fed direct current traction motors and their control
    IEC 60349-2:2010 Electric traction - Rotating electrical machines for rail and road vehicles - Part 2: Electronic converter-fed alternating current motors
    EN 60076-10:2016 POWER TRANSFORMERS - PART 10: DETERMINATION OF SOUND LEVELS (IEC 60076-10:2016)
    IEC 61377-3:2002 Railway applications - Rolling stock - Part 3: Combined testing of alternating current motors, fed by an indirect convertor, and their control system
    CLC/TS 50535:2010 Railway applications - Onboard auxiliary power converter systems
    EN 60349-2:2010 ELECTRIC TRACTION - ROTATING ELECTRICAL MACHINES FOR RAIL AND ROAD VEHICLES - PART 2: ELECTRONIC CONVERTER-FED ALTERNATING CURRENT MOTORS
    IEC 60146-1-1:2009 Semiconductor converters - General requirements and line commutated converters - Part 1-1: Specification of basic requirements
    IEC 60529:1989+AMD1:1999+AMD2:2013 CSV Degrees of protection provided by enclosures (IP Code)
    IEC 62278:2002 Railway applications - Specification and demonstration of reliability, availability, maintainability and safety (RAMS)
    IEC 61991:2000 Railway applications - Rolling stock - Protective provisions against electrical hazards
    IEC 60571:2012 Railway applications - Electronic equipment used on rolling stock
    IEC 62236-3-2:2008 Railway applications - Electromagnetic compatibility - Part 3-2: Rolling stock - Apparatus
    IEC 60349-4:2012 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
    EN 60349-4 : 2013 Electric traction - Rotating electrical machines for rail and road vehicles - Part 4: Permanent magnet synchronous electrical machines connected to an electronic converter
    IEC 62497-1:2010+AMD1:2013 CSV Railway applications - Insulation coordination - Part 1: Basic requirements - Clearances and creepage distances for all electricaland electronic equipment
    IEC 60587:2007 Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to tracking and erosion
    EN 60529:1991/AC:2016-12 DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015)
    IEC 60077-1:2017 Railway applications - Electric equipment for rolling stock - Part 1: General service conditions and general rules
    IEC 62520:2011 Railway applications - Electric traction - Short-primary type linear induction motors (LIM) fed by power converters
    EN 60322 : 2001 RAILWAY APPLICATIONS - ELECTRIC EQUIPMENT FOR ROLLING STOCK - RULES FOR POWER RESISTORS OF OPEN CONSTRUCTION
    IEC 60664-1:2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests
    IEC 61377-1:2006 Railway applications - Rolling stock - Part 1: Combined testing of inverter-fed alternating current motors and their control system
    IEC 60747-15:2010 Semiconductor devices - Discrete devices - Part 15: Isolated power semiconductor devices
    IEC 60384-4:2016 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
    IEC 62498-1:2010 Railway applications - Environmental conditions for equipment - Part 1: Equipment on board rolling stock
    IEC 60310:2016 Railway applications - Traction transformers and inductors on board rolling stock
    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective