• IEC 60384-1:2016

    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

    Fixed capacitors for use in electronic equipment - Part 1: Generic specification

    Available format(s):  Hardcopy, PDF, PDF 3 Users, PDF 5 Users, PDF 9 Users

    Superseded date:  16-07-2021

    Language(s):  English - French

    Published date:  12-02-2016

    Publisher:  International Electrotechnical Committee

    Add To Cart

    Abstract - (Show below) - (Hide below)

    IEC 60384-1:2016 is available as IEC 60384-1:2016 RLV which contains the International Standard and its Redline version, showing all changes of the technical content compared to the previous edition.

    IEC 60384-1:2016 is a generic specification and is applicable to fixed capacitors for use in electronic equipment. It establishes standard terms, inspection procedures and methods of test for use in sectional and detail specifications of electronic components for quality assessment or any other purpose. This edition contains the following significant technical changes with respect to the previous edition:
    - INTRODUCTION added;
    - 4.41 Whisker growth test added;
    - Annex Q completely restructured.

    General Product Information - (Show below) - (Hide below)

    Committee TC 40
    Development Note Stability Date: 2020. (02/2016)
    Document Type Standard
    Publisher International Electrotechnical Committee
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    08/30181362 DC : DRAFT APR 2008 BS EN 60384-14 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
    GOST R IEC 60384-14-1 : 2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1 - BLANK DETAIL SPECIFICATION ON FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO SUPPLY MAINS - ASSESSMENT LEVEL D
    NF EN 60384-26 : 2011 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    NF EN 60384-18-2 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    12/30260687 DC : 0 BS EN 60384-20 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
    UNE-EN 60695-11-5:2017 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance
    CEI EN 60384-20-1 : 2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    NF EN 62490-1 : 2011 ESL MEASURING METHOD - PART 1: CAPACITORS WITH LEAD TERMINAL FOR USE IN ELECTRONIC EQUIPMENT
    13/30284041 DC : 0 BS EN 60384-19 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
    12/30239877 DC : 0 BS EN 60065 ED 8.0 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    08/30183175 DC : 0 BS EN 62490-2 - LOW ESL MEASURING METHOD - PART 2: SURFACE MOUNT CAPACITORS FOR USE IN ELECTRICAL AND ELECTRONIC EQUIPMENT
    10/30216212 DC : 0 BS EN 60384-2:2005/A1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE- TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
    BS EN 60384-26 : 2010 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    02/206105 DC : DRAFT MAY 2002 IEC 60384-22-1, ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22-1: BLANK DETAIL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC - CLASS 2 - ASSESSMENT LEVEL EZ
    NF EN 61881-2 : 2013 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE
    13/30284045 DC : 0 BS EN 60384-23 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
    BS EN 60384-11-1 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11-1: BLANK DETAIL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    09/30214333 DC : 0 BS EN 60384-22 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    NF EN 60384-4 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    13/30289543 DC : 0 BS EN 60384-4 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO2) AND NON-SOLID ELECTROLYTE
    BS EN 60384-4-2 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
    CEI EN 60384-9 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    13/30264553 DC : 0 BS EN 61287-1 ED 3.0 - RAILWAY APPLICATIONS - POWER CONVERTORS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS
    10/30216216 DC : 0 BS EN 60384-13:2006/A1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    BS EN 60384-14-2 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-2: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - SAFETY TESTS ONLY
    CEI EN 60384-4-2 : 2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
    CEI EN 60384-19-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    I.S. EN 60384-26-1:2010 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    CEI EN 60384-4-1 : 2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    17/30349734 DC : 0 BS EN 60384-26 ED.2.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    I.S. EN 60384-4-1:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT PART 4-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    12/30260691 DC : 0 BS EN 60384-24 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    BS EN 60384-14-1 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL DZ
    06/30156699 DC : DRAFT OCT 2006 IEC 60384-11-1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11-1: BLANK DETAIL SPECIFICATION - FIXED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS - ASSESSMENT LEVEL E
    03/108095 DC : DRAFT MAY 2003 IEC 60384-14 ED.3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
    BS EN 60384-22:2012 (published 2012-04) Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
    BS EN 60384-6-1:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS - ASSESSMENT LEVEL E
    13/30289547 DC : 0 BS EN 60384-18 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO2) AND NON-SOLID ELECTROLYTE
    NF EN 60384-14-1 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL DZ
    BS EN 60384-21-1 : 2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 - ASSESSMENT LEVEL EZ
    BS EN 60384-23-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23-1: BLANK DETAIL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS - ASSESSMENT LEVEL EZ
    06/30156696 DC : DRAFT OCT 2006
    CEI EN 60695-11-5 : 2006 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
    03/108096 DC : DRAFT MAY 2003 IEC 60384-14-1 ED.2.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL D
    03/105651 DC : 0 IEC 60384-14-1 ED.2.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL D
    CEI EN 60384-14 : 2014 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
    BS 6201-2(1982) : 1982 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - SPECIFICATION FOR FIXED CAPACITORS OF CERAMIC DIELECTRIC CLASS 2 SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
    02/205635 DC : 0 IEC 60384-23. ED.1.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC CHIP D.C. CAPACITORS
    CEI EN 60384-18 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    BS EN 62490-1 : 2010 ESL MEASURING METHOD - PART 1: CAPACITORS WITH LEAD TERMINAL FOR USE IN ELECTRONIC EQUIPMENT
    BS EN 60384-25-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25-1: BLANK DETAIL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    I.S. EN 60384-25:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    10/30211766 DC : 0 BS EN 61881-3 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITOR
    CEI EN 60384-23-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23-1: BLANK DETAIL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS - ASSESSMENT LEVEL EZ
    BS EN 60065 : 2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014, MODIFIED)
    08/30192301 DC : 0 BS EN 60384-26 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    04/30111619 DC : DRAFT MARCH 2004
    04/30113172 DC : DRAFT MAY 2004 IEC 60384-24 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    03/104578 DC : DRAFT MAR 2003 IEC 60384-8 ED. 3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION - FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    CEI EN 60384-26-1 : 2011 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    BS EN 60384-16 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
    04/30111632 DC : DRAFT MARCH 2004
    BS 415(1998) : 1998 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    BS EN 60384-26-1 : 2010 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    BS QC300300(1998) : 1998 HARMONIZED SYSTEM OF QUALITY ASSESSMENT FOR ELECTRONIC COMPONENTS - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - SECTIONAL SPECIFICATION: ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID AND NON-SOLID ELECTROLYTE
    02/206103 DC : DRAFT MAY 2002 IEC 60384-21-1, ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21-1: BLANK DETAIL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC - CLASS 1 - ASSESSMENT LEVEL EZ
    06/30153434 DC : DRAFT JULY 2006 BS IEC 60384-20 ED.2 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
    BS 6201-3(1982) : 1982 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - SPECIFICATION FOR FIXED CAPACITORS FOR RADIO INTERFERENCE SUPPRESSION - SELECTION OF METHODS OF TEST AND GENERAL REQUIREMENTS
    BS EN 60384-21:2012 (published 2012-04) Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
    BS EN 60384-24-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24-1: BLANK DETAIL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    CEI EN 60384-15 : 1ED 2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
    10/30235845 DC : 0 BS EN 61881-3 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITOR FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS
    10/30235844 DC : 0 BS EN 61881-2 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITOR FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE
    CEI EN 60384-3 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
    I.S. EN 60384-20-1:2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    13/30289551 DC : 0 BS EN 60384-3 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYT CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE
    10/30196657 DC : 0 BS EN 61881-2 - RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE
    I.S. EN 60384-6-1:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS - ASSESSMENT LEVEL E
    UNE-EN 60065:2015 Audio, video and similar electronic apparatus - Safety requirements
    03/105650 DC : 0 IEC 60384-14 ED.3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
    CEI EN 60384-3-1 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-1: BLANK DETAIL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    CEI EN 60384-24-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24-1: BLANK DETAIL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    12/30260721 DC : 0 BS EN 60384-25 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    BS EN 61881-2 : 2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE
    17/30355844 DC : DRAFT JUL 2017 BS EN 60384-21 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    CSA C22.2 No. 60065 : 2016 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    03/104579 DC : DRAFT MAR 2003 IEC 60384-8-4 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 - ASSESSMENT LEVEL EZ
    09/30214329 DC : 0 BS EN 60384-21 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    04/30113221 DC : DRAFT MAY 2004 IEC 60384-25-1 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25-1: BLANK DETAIL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    14/30315320 DC : 0 BS EN 60384-15 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
    BS EN 60384-4:2016 Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
    04/30113182 DC : DRAFT MAY 2004 IEC 60384-24-1 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24-1: BLANK DETAIL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    CEI EN 60384-2 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
    04/30111636 DC : DRAFT MARCH 2004
    BS EN 60384-20-1 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    BS EN 60384-14 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS (IEC 60384-14:2013)
    04/30113200 DC : DRAFT MAY 2004 IEC 60384-25 ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    06/30157128 DC : 0
    BS EN 62391-2 : 2006 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION
    13/30280854 DC : 0 BS EN 60384-8 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    BS EN 60384-19-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    04/30111646 DC : DRAFT MARCH 2004
    BS EN 60384-6:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS
    BS EN 60384-19:2015 Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
    02/206104 DC : DRAFT MAY 2002 IEC 60384-22, ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC - CLASS 2 - ASSESSMENT LEVEL EZ
    CEI EN 60384-11 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    BS EN 61287-1 : 2014 RAILWAY APPLICATIONS - POWER CONVERTORS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS
    03/104580 DC : DRAFT MAR 2003 IEC 60384-9 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION - FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    BS EN 60384-11 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    BS EN 60384-3:2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
    BS EN 60939-2-1 : 2004 COMPLETE FILTER UNITS FOR RADIO INTERFERENCE SUPPRESSION - PART 2-1: BLANK DETAIL SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED (ASSESSMENT LEVEL D/DZ)
    04/30111593 DC : DRAFT MAR 2004 IEC 60384-2 ED.3 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATIONS - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS
    BS EN 62490-2 : 2010 ESL MEASURING METHOD - PART 2: SURFACE MOUNT CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT
    17/30363044 DC : 0 BS EN 62047-36 - SEMICONDUCTOR DEVICES - MICRO-ELECTROMECHANICAL DEVICES - PART 36: ENVIRONMENTAL AND DIELECTRIC WITHSTAND TEST METHODS FOR MEMS PIEZOELECTRIC THIN FILMS
    BS EN 60384-25 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    CEI EN 60384-18-2 : 2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    BS EN 60384-17-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17-1: BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS - ASSESSMENT LEVELS E AND EZ
    BS EN 60384-15:2017 Fixed capacitors for use in electronic equipment Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
    17/30355848 DC : 0 BS EN 60384-22 ED.3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    02/206102 DC : DRAFT MAY 2002 IEC 60384-21, ED.1 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC - CLASS 1 - ASSESSMENT LEVEL EZ
    BS EN 60384-13-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13-1: BLANK DETAIL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS - ASSESSMENT LEVEL E AND EZ
    NBR IEC 60065 : 2009 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    I.S. EN 60384-17:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS
    BS EN 60384-18-2 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    04/30111650 DC : DRAFT MARCH 2004
    I.S. EN 60384-18:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    I.S. EN 60384-11:2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    BS EN 60384-18:2016 Fixed capacitors for use in electronic equipment Sectional specification. Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
    BS EN 60384-3-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-1: BLANK DETAIL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    BS EN 60384-13 : 2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    EN 60384-2:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS (IEC 60384-2:2011)
    CEI EN 60384-11-1 : 2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11-1: BLANK DETAIL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    BS PD CLC/TR 50454 : 2008 GUIDE FOR THE APPLICATION OF ALUMINIUM ELECTROLYTIC CAPACITORS
    BS EN 60384-18-1 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
    I.S. EN 60384-21:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-21:2011 (EQV))
    03/104581 DC : DRAFT MAR 2003 IEC 60384-9-1 ED.3.0 - FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 - ASSESSMENT LEVEL EZ
    CEI EN 60384-18-1 : 2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
    IEC 60695-11-5:2016 RLV FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
    BS EN 61881-3 : 2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS
    07/30174056 DC : 0 BS EN 60065 - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    BS EN 60384-17:2005 (published 2006-02) Fixed capacitors for use in electronic equipment Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
    EN 60695-11-5:2017 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE (IEC 60695-11-5:2016)
    NF EN 62490-2 : 2011 ESL MEASURING METHOD - PART 2: SURFACE MOUNT CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT
    I.S. EN 60384-21-1:2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 - ASSESSMENT LEVEL EZ
    NF EN 60384-18-1 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
    I.S. EN 60384-16:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
    CEI EN 60384-22-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 - ASSESSMENT LEVEL EZ
    CEI EN 60384-25-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25-1: BLANK DETAIL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    NF EN 60384-14 : 2014 AMD 1 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
    I.S. EN 60384-8:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    CEI EN 60384-23 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
    CEI EN 60384-14-2 : 2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-2: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - SAFETY TESTS ONLY
    NF EN 60384-18 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    CEI EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
    CEI EN 60384-26 : 2011 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    I.S. EN 60384-25-1:2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25-1: BLANK DETAIL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    CEI CLC/TR 50454 : 2011 GUIDE FOR THE APPLICATION OF ALUMINIUM ELECTROLYTIC CAPACITORS
    CEI EN 60384-17 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS
    I.S. EN 60384-2-1:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2-1: BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS - ASSESSMENT LEVELS E AND EZ
    CEI EN 60384-13 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    I.S. EN 60939-2-1:2004 COMPLETE FILTER UNITS FOR RADIO INTERFERENCE SUPPRESSION - PART 2-1: BLANK DETAIL SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED (ASSESSMENT LEVEL D/DZ)
    BS EN 60384-23:2015 Fixed capacitors for use in electronic equipment Sectional specification. Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors
    I.S. EN 60384-26:2010 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    I.S. EN 61881-2:2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE (IEC 61881-2:2012 (EQV))
    I.S. EN 60384-3:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
    I.S. EN 60384-3-1:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-1: BLANK DETAIL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    I.S. EN 60384-4-2:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
    BS EN 60384-22-1 : 2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 - ASSESSMENT LEVEL EZ
    I.S. EN 60065:2014 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    I.S. EN 60384-13-1:2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13-1: BLANK DETAIL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS - ASSESSMENT LEVELS E AND EZ
    I.S. EN 61287-1:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS
    BS EN 60384-8 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    I.S. EN 60384-6:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS
    BS EN 60384-2:2012 (published 2012-04) Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
    BS EN 60384-4-1 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    BS EN 60384-24 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (IEC 60384-24:2015)
    I.S. EN 60384-22-1:2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 - ASSESSMENT LEVEL EZ
    BS EN 60384-2-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2-1: BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS - ASSESSMENT LEVELS E AND EZ
    BS EN 60384-9:2015 (published 2015-05) Fixed capacitors for use in electronic equipment Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
    I.S. EN 60384-2:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS (IEC 60384-2:2011 (EQV))
    I.S. EN 60384-15:2017 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 15: SECTIONAL SPECIFICATION: FIXED TANTALUM CAPACITORS WITH NON-SOLID OR SOLID ELECTROLYTE
    I.S. EN 60384-20:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
    CEI EN 60384-8 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    GOST R IEC 60384-14 : 2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14 - SECTIONAL SPECIFICATION ON FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
    I.S. EN 60384-24:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE
    I.S. EN 60384-14-2:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-2: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - SAFETY TESTS ONLY
    OVE/ONORM EN 60384-11 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    I.S. EN 60384-11-1:2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11-1: BLANK DETAIL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    I.S. EN 62490-1:2010 ESL MEASURING METHOD - PART 1: CAPACITORS WITH LEAD TERMINAL FOR USE IN ELECTRONIC EQUIPMENT
    BS EN 60695-11-5:2017 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
    IEC 62391-1:2015 RLV Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
    CEI EN 62490-1 : 2011 ESL MEASURING METHOD - PART 1: CAPACITORS WITH LEAD TERMINAL FOR USE IN ELECTRONIC EQUIPMENT
    IEC 62391-1:2015 Fixed electric double-layer capacitors for use in electric and electronic equipment - Part 1: Generic specification
    I.S. EN 60695-11-5:2017 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
    CEI EN 60384-21-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 - ASSESSMENT LEVEL EZ
    I.S. EN 60384-14-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL DZ
    I.S. EN 61881-3:2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 3: ELECTRIC DOUBLE-LAYER CAPACITORS (IEC 61881-3:2012 (EQV))
    I.S. EN 62490-2:2010 ESL MEASURING METHOD - PART 2: SURFACE MOUNT CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT
    I.S. EN 60384-22:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (IEC 60384-22:2011 (EQV))
    CEI EN 61881-2 : 2013 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE
    CEI EN 60384-22 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    I.S. EN 60384-17-1:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17-1: BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS - ASSESSMENT LEVELS E AND EZ
    CEI EN 60384-21 : 2013 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1
    NF EN 60065 : 2015 AMD 11 2018 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    UNE-EN 61287-1:2015 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
    CEI EN 62391-2 : 2006 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION
    CEI EN 62490-2 : 2011 ESL MEASURING METHOD - PART 2: SURFACE MOUNT CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT
    CEI EN 60384-2-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2-1: BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC D.C. CAPACITORS - ASSESSMENT LEVELS E AND EZ
    CEI EN 60384-4 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    CEI EN 60384-17-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17-1: BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS - ASSESSMENT LEVELS E AND EZ
    NF EN 60384-23 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
    CSA E384.14.1 : 1995 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: BLANK DETAIL SPECIFICATION: FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL D
    CLC/TR 50454:2008 Guide for the application of aluminium electrolytic capacitors
    I.S. EN 60384-23-1:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23-1: BLANK DETAIL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS - ASSESSMENT LEVEL EZ
    I.S. EN 60384-19:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS
    BS EN 62391-1:2016 Fixed electric double-layer capacitors for use in electric and electronic equipment Generic specification
    I.S. EN 60384-4:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE
    I.S. EN 60384-18-1:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
    12/30258455 DC : 0 FPREN 60065:2011+FPRAA - AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS
    I.S. EN 60384-19-1:2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    BS EN 60384-20:2015 Fixed capacitors for use in electronic equipment Sectional specification. Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
    S.R. CLC/TR 50454:2008 GUIDE FOR THE APPLICATION OF ALUMINIUM ELECTROLYTIC CAPACITORS
    I.S. EN 60384-23:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS
    I.S. EN 61204-7:2006 LOW VOLTAGE POWER SUPPLIES, D.C. OUTPUT - PART 7: SAFETY REQUIREMENTS
    EN 60384-25 : 2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 25: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (IEC 60384-25:2015)
    I.S. EN 60384-9:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2
    I.S. EN 60384-13:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (IEC 60384-13:2011 (EQV))
    IEC 60695-11-5 : 2.0 FIRE HAZARD TESTING - PART 11-5: TEST FLAMES - NEEDLE-FLAME TEST METHOD - APPARATUS, CONFIRMATORY TEST ARRANGEMENT AND GUIDANCE
    I.S. EN 62391-2:2006 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION
    I.S. EN 60384-18-2:2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    IEC 60384-8:2015 Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric, Class 1
    I.S. EN 60384-14:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14: SECTIONAL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS
    I.S. EN 60384-24-1:2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24-1: BLANK DETAIL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    I.S. EN 62391-1:2016 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    IEC 60384-15:2017 Fixed capacitors for use in electronic equipment - Part 15: Sectional specification: Fixed tantalum capacitors with non-solid or solid electrolyte
    EN 60384-19-1:2006/corrigendum Nov. 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 19-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    EN 60384-24:2015/AC:2017-01 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE (IEC 60384-24:2015/COR1:2016)
    EN 60384-13-1:2006/corrigendum:2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13-1: BLANK DETAIL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS - ASSESSMENT LEVEL E AND EZ
    EN 60384-4-2:2007/corrigendum:2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-2: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
    EN 60384-4-1:2007/corrigendum:2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 4-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON-SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    IEC 60384-17:2005 Fixed capacitors for use in electronic equipment - Part 17: Sectional specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors
    IEC 60384-23-1:2005 Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ
    IEC 60384-3-1:2006 Fixed capacitors for use in electronic equipment - Part 3-1: Blank detail specification: Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte - Assessment level EZ
    IEC 60384-3:2016 Fixed capacitors for use in electronic equipment - Part 3: Sectional specification - Surface mount fixed tantalum electrolytic capacitors with solid (MnO2) electrolyte
    IEC 60384-24:2015 Fixed capacitors for use in electronic equipment - Part 24: Sectional specification - Fixed tantalum electrolytic surface mount capacitors with conductive polymer solid electrolyte
    IEC 62391-2:2006 Fixed electric double-layer capacitors for use in electronic equipment - Part 2: Sectional specfication - Electric double layer capacitors for power application
    IEC 61881-3:2012+AMD1:2013 CSV Railway applications - Rolling stock equipment - Capacitors forpower electronics - Part 3: Electric double-layer capacitors
    IEC 60384-21-1:2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 - ASSESSMENT LEVEL EZ
    IEC 60384-13-1:2006 Fixed capacitors for use in electronic equipment - Part 13-1: Blank detail specification - Fixed polypropylene film dielectric metal foil d.c. capacitors - Assessment level E and EZ
    IEC 60384-14-1:2016 Fixed capacitors for use in electronic equipment - Part 14-1: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Assessment level DZ
    IEC 62490-2:2010 ESL MEASURING METHOD - PART 2: SURFACE MOUNT CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT
    IEC 60384-25-1:2006 Fixed capacitors for use in electronic equipment - Part 25-1: Blank detail specification - Surface mount fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ
    IEC 60384-26-1:2010 Fixed capacitors for use in electronic equipment - Part 26-1: Blank detail specification - Fixed aluminium electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ
    IEC 60384-19:2015 Fixed capacitors for use in electronic equipment - Part 19: Sectional specification: Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors
    IEC 60384-2:2011 Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene terephthalate film dielectric d.c. capacitors
    IEC 60939-2-1:2004 COMPLETE FILTER UNITS FOR RADIO INTERFERENCE SUPPRESSION - PART 2-1: BLANK DETAIL SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED (ASSESSMENT LEVEL D/DZ)
    IEC 60384-23:2015 Fixed capacitors for use in electronic equipment - Part 23: Sectional specification - Fixed metallized polyethylene naphthalate film dielectric surface mount d.c. capacitors
    IEC 60384-25:2015 Fixed capacitors for use in electronic equipment - Part 25: Sectional specification: Fixed aluminium electrolytic surface mount capacitors with conductive polymer solid electrolyte
    IEC 60384-16:2005 Fixed capacitors for use in electronic equipment - Part 16: Sectional specification: Fixed metallized polypropylene film dielectric d.c. capacitors
    IEC 60384-9:2015 Fixed capacitors for use in electronic equipment - Part 9: Sectional specification: Fixed capacitors of ceramic dielectric, Class 2
    IEC 60384-14:2013+AMD1:2016 CSV Fixed capacitors for use in electronic equipment - Part 14: Sectional specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains
    IEC 60384-14-2:2016 Fixed capacitors for use in electronic equipment - Part 14-2: Blank detail specification - Fixed capacitors for electromagnetic interference suppression and connection to the supply mains - Safety tests only
    IEC 61881-2:2012 Railway applications - Rolling stock equipment - Capacitors for power electronics - Part 2: Aluminium electrolytic capacitors with non-solid electrolyte
    IEC 60384-4-1:2007 Fixed capacitors for use in electronic equipment - Part 4-1: Blank detail specification - Fixed aluminium electrolytic capacitors with non-solid electrolyte - Assessment level EZ
    IEC 60384-22-1:2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 - ASSESSMENT LEVEL EZ
    IEC 60384-18:2016 Fixed capacitors for use in electronic equipment - Part 18: Sectional specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) and non-solid electrolyte
    IEC 60384-19-1:2006 Fixed capacitors for use in electronic equipment - Part 19-1: Blank detail specification - Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c. capacitors - Assessment level EZ
    IEC 60384-11-1:2008 Fixed capacitors for use in electronic equipment - Part 11-1: Blank detail specification - Fixed polyethylene terephthalate film dielectric metal foil d.c. capacitors - Assessment level EZ
    IEC 60384-20-1:2008 Fixed capacitors for use in electronic equipment - Part 20-1: Blank detail specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors - Assessment level EZ
    IEC 60384-4:2016 Fixed capacitors for use in electronic equipment - Part 4: Sectional specification - Fixed aluminium electrolytic capacitors with solid (MnO2) and non-solid electrolyte
    IEC 60384-2-1:2005 Fixed capacitors for use in electronic equipment - Part 2-1: Blank detail specification: Fixed metallized polyethylene-terephthalate film dielectric d.c. capacitors - Assessment levels E and EZ
    IEC 60384-21:2011 Fixed capacitors for use in electronic equipment - Part 21: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 1
    IEC 60384-24-1:2006 Fixed capacitors for use in electronic equipment - Part 24-1: Blank detail specification - Surface mount fixed tantalum electrolytic capacitors with conductive polymer solid electrolyte - Assessment level EZ
    IEC 62391-1 : 2.0 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRIC AND ELECTRONIC EQUIPMENT - PART 1: GENERIC SPECIFICATION
    IEC 60384-18-2:2007 Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ
    IEC 60384-17-1:2005 Fixed capacitors for use in electronic equipment - Part 17-1: Blank detail specification: Fixed metallized polypropylene film dielectric a.c. and pulse capacitors - Assessment levels E and EZ
    IEC 60384-11:2008 Fixed capacitors for use in electronic equipment - Part 11: Sectional specification - Fixed polyethylene-terephthalate film dielectric metal foil d.c. capacitors
    IEC 60384-20:2015 Fixed capacitors for use in electronic equipment - Part 20: Sectional specification - Fixed metallized polyphenylene sulfide film dielectric surface mount d.c. capacitors
    IEC 61287-1:2014 Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods
    IEC 60384-6-1:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6-1: BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS - ASSESSMENT LEVEL E
    IEC 62490-1:2010 ESL MEASURING METHOD - PART 1: CAPACITORS WITH LEAD TERMINAL FOR USE IN ELECTRONIC EQUIPMENT
    IEC 60384-22:2011 Fixed capacitors for use in electronic equipment - Part 22: Sectional specification - Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2
    BS EN 61204-7:2006 Live working. Conductive clothing Safety requirements
    IEC 60384-6:2005 Fixed capacitors for use in electronic equipment - Part 6: Sectional specification - Fixed metallized polycarbonate film dielectric d.c. capacitors
    IEC 60384-18-1:2007 Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with solid (MnO2) electrolyte - Assessment level EZ
    IEC 60384-4-2:2007 Fixed capacitors for use in electronic equipment - Part 4-2: Blank detail specification - Fixed aluminium electrolytic capacitors with solid (MnO2) electrolyte - Assessment level EZ
    IEC 60384-13:2011 Fixed capacitors for use in electronic equipment - Part 13: Sectional specification - Fixed polypropylene film dielectric metal foil d.c. capacitors
    OVE/ONORM EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
    EN 60065:2014/AC:2017-01 AUDIO, VIDEO AND SIMILAR ELECTRONIC APPARATUS - SAFETY REQUIREMENTS (IEC 60065:2014/COR2:2016)
    EN 60384-13:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS (IEC 60384-13:2011)
    NF EN 60384-16 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
    EN 60384-22:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (IEC 60384-22:2011)
    EN 60384-26-1 : 2010 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 26-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    EN 60384-18-1 : 2007 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18-1: BLANK DETAIL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE - ASSESSMENT LEVEL EZ
    EN 62490-2 : 2010 ESL MEASURING METHOD - PART 2: SURFACE MOUNT CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT
    EN 60384-6-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS - ASSESSMENT LEVEL E
    EN 60384-18:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 18: SECTIONAL SPECIFICATION - FIXED ALUMINIUM ELECTROLYTIC SURFACE MOUNT CAPACITORS WITH SOLID (MNO[2]) AND NON-SOLID ELECTROLYTE (IEC 60384-18:2016)
    EN 60384-8:2015/AC:2017-09 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 8: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 1 (IEC 60384-8:2015/COR1:2017)
    EN 60384-3 : 2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3: SECTIONAL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH SOLID (MNO[2]) ELECTROLYTE
    EN 60384-23-1 : 2005 Fixed capacitors for use in electronic equipment - Part 23-1: Blank detail specification - Fixed surface mount metallized polyethylene naphthalate film dielectric DC capacitors - Assessment level EZ
    EN 60384-6 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 6: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYCARBONATE FILM DIELECTRIC D.C. CAPACITORS
    EN 60384-20:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20: SECTIONAL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS (IEC 60384-20:2015)
    EN 61881-2 : 2012 RAILWAY APPLICATIONS - ROLLING STOCK EQUIPMENT - CAPACITORS FOR POWER ELECTRONICS - PART 2: ALUMINIUM ELECTROLYTIC CAPACITORS WITH NON SOLID ELECTROLYTE (IEC 61881-2:2012)
    EN 60384-14-1:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-1: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - ASSESSMENT LEVEL DZ (IEC 60384-14-1:2016)
    EN 60384-23:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 23: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT METALLIZED POLYETHYLENE NAPHTHALATE FILM DIELECTRIC DC CAPACITORS (IEC 60384-23:2015)
    NF EN 60384-13 : 2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 13: SECTIONAL SPECIFICATION - FIXED POLYPROPYLENE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    EN 60384-17-1 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 17-1: BLANK DETAIL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC A.C. AND PULSE CAPACITORS - ASSESSMENT LEVELS E AND EZ
    EN 60384-20-1:2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 20-1: BLANK DETAIL SPECIFICATION - FIXED METALLIZED POLYPHENYLENE SULFIDE FILM DIELECTRIC SURFACE MOUNT D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    EN 61287-1:2014/AC:2014 RAILWAY APPLICATIONS - POWER CONVERTERS INSTALLED ON BOARD ROLLING STOCK - PART 1: CHARACTERISTICS AND TEST METHODS (IEC 61287-1:2014)
    EN 60384-18-2 : 2007 Fixed capacitors for use in electronic equipment - Part 18-2: Blank detail specification - Fixed aluminium electrolytic surface mount capacitors with non-solid electrolyte - Assessment level EZ
    EN 60384-14-2:2016 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 14-2: BLANK DETAIL SPECIFICATION - FIXED CAPACITORS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION AND CONNECTION TO THE SUPPLY MAINS - SAFETY TESTS ONLY (IEC 60384-14-2:2016)
    EN 60384-9:2015 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 9: SECTIONAL SPECIFICATION: FIXED CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 (IEC 60384-9:2015)
    EN 60384-11-1 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11-1: BLANK DETAIL SPECIFICATION - FIXED POLYETHYLENE TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS - ASSESSMENT LEVEL EZ
    EN 62490-1 : 2010 ESL MEASURING METHOD - PART 1: CAPACITORS WITH LEAD TERMINAL FOR USE IN ELECTRONIC EQUIPMENT
    EN 60384-3-1:2006/corrigendum:2009 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 3-1: BLANK DETAIL SPECIFICATION: SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH MANGANESE DIOXIDE SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    EN 60384-11 : 2008 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 11: SECTIONAL SPECIFICATION - FIXED POLYETHYLENE-TEREPHTHALATE FILM DIELECTRIC METAL FOIL D.C. CAPACITORS
    EN 60384-16 : 2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 16: SECTIONAL SPECIFICATION: FIXED METALLIZED POLYPROPYLENE FILM DIELECTRIC D.C. CAPACITORS
    EN 60384-22-1 : 2004 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 22-1: BLANK DETAIL SPECIFICATION: FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC DIELECTRIC, CLASS 2 - ASSESSMENT LEVEL EZ
    EN 60939-2-1 : 2004 COMPLETE FILTER UNITS FOR RADIO INTERFERENCE SUPPRESSION - PART 2-1: BLANK DETAIL SPECIFICATION - PASSIVE FILTER UNITS FOR ELECTROMAGNETIC INTERFERENCE SUPPRESSION - FILTERS FOR WHICH SAFETY TESTS ARE REQUIRED (ASSESSMENT LEVEL D/DZ)
    EN 62391-2 : 2006 FIXED ELECTRIC DOUBLE-LAYER CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 2: SECTIONAL SPECIFICATION - ELECTRIC DOUBLE-LAYER CAPACITORS FOR POWER APPLICATION
    EN 60384-24-1 : 2006 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 24-1: BLANK DETAIL SPECIFICATION - SURFACE MOUNT FIXED TANTALUM ELECTROLYTIC CAPACITORS WITH CONDUCTIVE POLYMER SOLID ELECTROLYTE - ASSESSMENT LEVEL EZ
    EN 60384-21:2012 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT - PART 21: SECTIONAL SPECIFICATION - FIXED SURFACE MOUNT