ISO 272:1982
|
Fasteners — Hexagon products — Widths across flats
|
EN 1254-3:1998
|
Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes
|
ISO 1179-1:2013
|
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 1: Threaded ports
|
ISO 3601-5:2015
|
Fluid power systems O-rings Part 5: Specification of elastomeric materials for industrial applications
|
EN 1591-1:2013
|
Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
|
ISO 8434-1:2007
|
Metallic tube connections for fluid power and general use Part 1: 24 degree cone connectors
|
UL 50:13ED 2015-10-16
|
Enclosures for Electrical Equipment, Non-Environmental Considerations
|
EN 10226-2:2005
|
Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation
|
IEC 60730-2-19:1997+AMD1:2000+AMD2:2007 CSV
|
Automatic electrical controls for household and similar use - Part 2-19: Particular requirements for electrically operated oil valves, including mechanical requirements
|
EN 10305-3:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 3: Welded cold sized tubes
|
EN 1254-5:1998
|
Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes
|
EN 1057:2006+A1:2010
|
Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
|
EN 10305-6:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 6: Welded cold drawn tubes for hydraulic and pneumatic power systems
|
EN 1254-1:1998
|
Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
|
EN 1254-2:1998
|
Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
|
ISO/TR 7620:2005
|
Rubber materials — Chemical resistance
|
EN 1092-3:2003/AC:2007
|
FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
|
NEMA 250 : 2014
|
ENCLOSURES FOR ELECTRICAL EQUIPMENT (1000 VOLTS MAXIMUM)
|
ISO 23936-1:2009
|
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 1: Thermoplastics
|
PREN 12514-4 : DRAFT 2009
|
PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
|
ISO 9974-1:1996
|
Connections for general use and fluid power Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing Part 1: Threaded ports
|
ISO 8216-99:2002
|
Petroleum products — Fuels (class F) — Classification — Part 99: General
|
ISO 9974-3:1996
|
Connections for general use and fluid power — Ports and stud ends with ISO 261 threads with elastomeric or metal-to-metal sealing — Part 3: Stud ends with metal-to-metal sealing (type B)
|
ISO 8217:2017
|
Petroleum products — Fuels (class F) — Specifications of marine fuels
|
EN 10305-2:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 2: Welded cold drawn tubes
|
EN 10305-1:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 1: Seamless cold drawn tubes
|
ISO 8434-2:2007
|
Metallic tube connections for fluid power and general use — Part 2: 37 degree flared connectors
|
ISO 1179-4:2007
|
Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 4: Stud ends for general use only with metal-to-metal sealing (type B)
|
EN 10305-4:2016
|
Steel tubes for precision applications - Technical delivery conditions - Part 4: Seamless cold drawn tubes for hydraulic and pneumatic power systems
|
ASME B16.1 : 2015
|
Gray Iron Pipe Flanges and Flanged Fittings: Classes 25, 125, and 250
|
ASME B1.20.1 : 2013(R2018)
|
PIPE THREADS, GENERAL PURPOSE (INCH)
|
ISO 6149-3:2006
|
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 3: Dimensions, design, test methods and requirements for light-duty (L series) stud ends
|
EN 1092-4:2002
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
|
ISO 23936-2:2011
|
Petroleum, petrochemical and natural gas industries — Non-metallic materials in contact with media related to oil and gas production — Part 2: Elastomers
|
ISO 8434-3:2005
|
Metallic tube connections for fluid power and general use — Part 3: O-ring face seal connectors
|
ISO 23551-1:2012
|
Safety and control devices for gas burners and gas-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
|
ISO 8434-6:2009
|
Metallic tube connections for fluid power and general use — Part 6: 60 degree cone connectors with or without O-ring
|
SAE J 514 : 2012
|
HYDRAULIC TUBE FITTINGS
|
EN 10241:2000
|
Steel threaded pipe fittings
|
ISO 6149-1:2006
|
Connections for hydraulic fluid power and general use Ports and stud ends with ISO 261 metric threads and O-ring sealing Part 1: Ports with truncated housing for O-ring seal
|
EN 10284:2000
|
Malleable cast iron fittings with compression ends for polyethylene (PE) piping systems
|
ASME B16.5 : 2017
|
PIPE FLANGES AND FLANGED FITTINGS: NPS 1/2 THROUGH NPS 24 METRIC/INCH STANDARD
|
IEC 60534-2-3:2015
|
Industrial-process control valves - Part 2-3: Flow capacity - Test procedures
|
EN 12760:2016
|
Industrial valves - Socket welding ends for steel valves
|
ISO 1179-2:2013
|
Connections for general use and fluid power — Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing — Part 2: Heavy-duty (S series) and light-duty (L series) stud ends with elastomeric sealing (type E)
|
EN 10242:1994/A2:2003
|
THREADED PIPE FITTING IN MALLEABLE CAST IRON
|
EN 1092-2:1997
|
Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
|
EN 10226-1:2004
|
Pipe threads where pressure tight joints are made on the threads - Part 1: Taper external threads and parallel internal threads - Dimensions, tolerances and designation
|
SAE J512 : 1997
|
AUTOMOTIVE TUBE FITTINGS
|
IEC 60534-1:2005
|
Industrial-process control valves - Part 1: Control valve terminology and general considerations
|
ISO 228-1:2000
|
Pipe threads where pressure-tight joints are not made on the threads Part 1: Dimensions, tolerances and designation
|
ISO 23550:2011
|
Safety and control devices for gas burners and gas-burning appliances General requirements
|
ISO 1179-3:2007
|
Connections for general use and fluid power Ports and stud ends with ISO 228-1 threads with elastomeric or metal-to-metal sealing Part 3: Light-duty (L series) stud ends with sealing by O-ring with retaining ring (types G and H)
|
IEC 60730-1:2013+AMD1:2015 CSV
|
Automatic electrical controls - Part 1: General requirements
|