EN 1254-5:1998

Superseded

Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View superseded by

Copper and copper alloys - Plumbing fittings - Part 5: Fittings with short ends for capillary brazing to copper tubes

Available format(s):

Superseded date: 03-06-2021

Language(s):

Published date: 21-01-1998

Publisher: Comite Europeen de Normalisation

Pure ENs are not available for sale, please purchase a suitable national adoption

Table of Contents - (Show below) - (Hide below)

Foreword
1 Scope
2 Normative references
3 Definitions
  3.1 plumbing fitting
  3.2 capillary end
  3.3 reducer (short end for capillary brazing to
      copper tubes)
  3.4 adaptor fitting
  3.5 nominal diameter
4 Requirements
  4.1 General
  4.2 Materials
  4.3 Dimensions and tolerances
  4.4 Design and manufacture
  4.5 Production test requirements
  4.6 Type test requirements
5 Test methods
  5.1 Assembly dimensions
  5.2 Leaktightness under internal hydrostatic
      pressure
  5.3 Pressure test
  5.4 Carbon in bore tests
  5.5 Dezincification resistance test
  5.6 Stress corrosion resistance test
6 Designation
7 Marking
  7.1 General
  7.2 Dezincification resistant copper-zinc alloys
8 Documentation
  8.1 Declaration of conformity
  8.2 User instructions
Annex A (normative) Carbon film test
Annex B (normative) Determination of mean depth of
                    dezincification
Annex C (informative) Bibliography

Abstract - (Show below) - (Hide below)

This European Standard specifies materials, assembly dimensions and tolerances and test requirements for fittings of copper and copper alloys with or without plating. Maximum permissible temperatures and pressures are also established. This part of prEN 1245 specifies connection end dimensions of short cup ends suitable only for brazing, for the purposes of joining copper tubes specified in EN 1057. Fittings may comprise a combination of any of the end types specified in prEN 1254-1 to prEN 1254-5 or other standards. The standard establishes a designation system for the fittings.

General Product Information - (Show below) - (Hide below)

Committee	CEN/TC 133
Document Type	Standard
ISBN
Pages
Published
Publisher	Comite Europeen de Normalisation
Status	Superseded
Superseded By	EN 1254-5:2021

National Adoptions - (Show below) - (Hide below)

Equivalent Standard(s)	Relationship
ONORM EN 1254-5 : 1998	Identical
NBN EN 1254-5 : 1998	Identical
I.S. EN 1254-5:1998	Identical
SN EN 1254-5 : 1998	Identical
UNI EN 1254-5 : 2000	Identical
BS EN 1254-5:1998	Identical
DIN EN 1254-5:1998-03	Identical
NS EN 1254-5 : 1ED 1998	Identical
NF EN 1254-5 : 1998	Identical
UNE-EN 1254-5:1999	Identical
NEN EN 1254-5 : 1998	Identical
PN EN 1254-5 : 2004	Identical

Standards Referenced By This Book - (Show below) - (Hide below)

DIN EN 15092:2008-09	BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
DIN EN 16125:2016-03	LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
05/30128654 DC : DRAFT FEB 2005	EN 1775 - GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
DIN EN 806-4:2010-06	Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
04/30126822 DC : 0	EN 15092 - BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
UNE-EN 13547:2014	Industrial valves - Copper alloy ball valves
I.S. EN 1254-3:1998	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 3: FITTINGS WITH COMPRESSION ENDS FOR USE WITH PLASTICS PIPES
I.S. EN 13547:2013	INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
DIN EN ISO 23553-1:2014-09	Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014); German version EN ISO 23553-1:2014
DIN EN 1254-1:1998-03	Copper and copper alloy plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
BS EN 1254-2:1998	Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with copper tubes
EN 13547:2013	Industrial valves - Copper alloy ball valves
CEN/TS 13547:2006	Industrial valves - Copper alloy ball valves
09/30202316 DC : 0	BS EN 12514-4 - PARTS FOR SUPPLY SYSTEMS FOR CONSUMING UNITS WITH LIQUID FUELS - PART 4: SAFETY REQUIREMENTS AND TESTS - PIPINGS AND PARTS WITHIN PIPELINES
DIN EN 15001-1:2011-02	Gas infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
I.S. EN 1254-4:1998	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
DD CEN/TS 13547:2006	Industrial valves. Copper alloy ball valves
I.S. EN 1254-1:1998	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES
I.S. EN 16125:2015	LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG IN LIQUID PHASE AND VAPOUR PRESSURE PHASE
DIN EN 14868:2005-11	PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
DIN EN 14868 E : 2005	PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
BS EN 1254-3:1998	Copper and copper alloys. Plumbing fittings Fittings with compression ends for use with plastics pipes
BS EN 1254-4:1998	Copper and copper alloys. Plumbing fittings Fittings combining other end connections with capillary or compression ends
DIN EN 1775:2007-10	Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
I.S. EN 1775:2007	GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
DIN EN 15092 E : 2008	BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
07/19990369 DC : 0	BS EN 806-4 - SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4 - INSTALLATION
I.S. EN ISO 23553-1:2014	SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO 23553-1:2014)
I.S. EN 15092:2008	BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
UNI EN 806-4 : 2010	SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
07/30163618 DC : 0	BS EN 1254-2 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES
EN 1254-2:1998	Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
BS EN 806-4:2010	Specifications for installations inside buildings conveying water for human consumption Installation
EN 1254-3:1998	Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes
DIN CEN/TS 13547:2007-02	INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
NF EN 15001-1 : 2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
07/30144895 DC : 0	BS EN 723 - COPPER AND COPPER ALLOYS - COMBUSTION METHOD FOR DETERMINATION OF CARBON CONTENT ON THE INNER SURFACE OF COPPER TUBES OR FITTINGS
BS EN 16125:2015	LPG Equipment and Accessories. Pipework systems and supports. LPG in liquid phase and vapour pressure phase
NF EN 806-4 : 2010	SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
UNI EN 13547 : 2013	INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
I.S. CEN TS 13547:2006	INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
UNE-EN ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
UNE-EN 16125:2016	LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
UNI EN 15001-1 : 2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
UNI EN 1775 : 2007	GAS SUPPLY - GAS PIPEWORK FOR BUILDINGS - MAXIMUM OPERATING PRESSURE LESS THAN OR EQUAL TO 5 BAR - FUNCTIONAL RECOMMENDATIONS
UNI EN ISO 23553-1 : 2014	SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL-BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES
DIN EN 13547:2013-12	INDUSTRIAL VALVES - COPPER ALLOY BALL VALVES
BS EN 15092:2008	Building valves. Inline hot water supply tempering valves. Tests and requirements
04/30114458 DC : 0	EN 14905 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - RECOMMENDED PRACTICE FOR THE INSTALLATION OF COPPER AND COPPER ALLOY PLUMBING FITTINGS
BS EN 13547:2013	Industrial valves. Copper alloy ball valves
13/30276940 DC : 0	BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
I.S. EN 1254-2:1998	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 2: FITTINGS WITH COMPRESSION ENDS FOR USE WITH COPPER TUBES
I.S. EN 806-4:2010	SPECIFICATIONS FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 4: INSTALLATION
BS EN 14868:2005	Protection of metallic materials against corrosion. Guidance on the assessment of corrosion likelihood in closed water circulation systems
UNE-EN 15001-1:2010	Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
BS EN ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances. Particular requirements Automatic and semi-automatic valves
12/30250105 DC : 0	BS ISO 23553-1 - SAFETY AND CONTROL DEVICES FOR OIL BURNERS AND OIL BURNING APPLIANCES - PARTICULAR REQUIREMENTS - PART 1: AUTOMATIC AND SEMI-AUTOMATIC VALVES (ISO/DIS 23553-1:2012)
ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances Particular requirements Part 1: Automatic and semi-automatic valves
BS EN 806-2:2005	Specifications for installations inside buildings conveying water for human consumption Design
EN 1775:2007	Gas supply - Gas pipework for buildings - Maximum operating pressure less than or equal to 5 bar - Functional recommendations
EN 15092:2008	Building valves - Inline hot water supply tempering valves - Tests and requirements
EN 15001-1:2009	Gas Infrastructure - Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations - Part 1: Detailed functional requirements for design, materials, construction, inspection and testing
EN 14868 : 2005	PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - GUIDANCE ON THE ASSESSMENT OF CORROSION LIKELIHOOD IN CLOSED WATER CIRCULATION SYSTEMS
EN 806-2:2005	Specification for installations inside buildings conveying water for human consumption - Part 2: Design
EN 16125:2015	LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase
EN 806-4:2010	Specifications for installations inside buildings conveying water for human consumption - Part 4: Installation
EN ISO 23553-1:2014	Safety and control devices for oil burners and oil-burning appliances - Particular requirements - Part 1: Automatic and semi-automatic valves (ISO 23553-1:2014)
07/30163615 DC : 0	BS EN 1254-1 - COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 1: FITTINGS WITH ENDS FOR CAPILLARY SOLDERING OR CAPILLARY BRAZING TO COPPER TUBES
EN 1254-4:1998/AC:1999	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
10/30227098 DC : 0	BS EN 16125 - LPG EQUIPMENT AND ACCESSORIES - PIPEWORK SYSTEMS AND SUPPORTS - LPG LIQUID PHASE AND VAPOUR PRESSURE PHASE
BS EN 15001-1:2009	Gas infrastructure. Gas installation pipework with an operating pressure greater than 0,5 bar for industrial installations and greater than 5 bar for industrial and non-industrial installations Detailed functional requirements for design, materials, construction, inspection and testing
EN 1254-1:1998	Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
UNI EN 15092 : 2008	BUILDING VALVES - INLINE HOT WATER SUPPLY TEMPERING VALVES - TESTS AND REQUIREMENTS
03/118682 DC : DRAFT JAN 2004	PREN 14868 - PROTECTION OF METALLIC MATERIALS AGAINST CORROSION - CORROSION LIKELIHOOD IN WATER RECIRCULATION SYSTEMS
07/30168416 DC : 0	BS EN 1264-4 - WATER BASED SURFACE EMBEDDED HEATING AND COOLING SYSTEMS - PART 4: INSTALLATION
UNI EN 806-2 : 2008	SPECIFICATION FOR INSTALLATIONS INSIDE BUILDINGS CONVEYING WATER FOR HUMAN CONSUMPTION - PART 2: DESIGN
I.S. EN 15001-1:2009	GAS INFRASTRUCTURE - GAS INSTALLATION PIPEWORK WITH AN OPERATING PRESSURE GREATER THAN 0,5 BAR FOR INDUSTRIAL INSTALLATIONS AND GREATER THAN 5 BAR FOR INDUSTRIAL AND NON-INDUSTRIAL INSTALLATIONS - PART 1: DETAILED FUNCTIONAL REQUIREMENTS FOR DESIGN, MATERIALS, CONSTRUCTION, INSPECTION AND TESTING
DIN EN 1254-4:1998-03	Copper and copper alloy plumbing fittings - Part 4: Fittings combining other end connections with capillary or compression ends
DIN EN 806-2:2005-06	Specification for installations inside buildings conveying water for human consumption - Part 2: Design
BS EN 1775:2007	Gas supply. Gas pipework for buildings. Maximum operating pressure less than or equal to 5 bar. Functional recommendations
BS EN 1254-1:1998	Copper and copper alloys. Plumbing fittings Fittings with ends for capillary soldering or capillary brazing to copper tubes
UNE-EN 16125:2020	LPG Equipment and Accessories - Pipework systems and supports - LPG in liquid phase and vapour pressure phase

Standards Referencing This Book - (Show below) - (Hide below)

EN 1254-3:1998	Copper and copper alloys - Plumbing fittings - Part 3: Fittings with compression ends for use with plastics pipes
EN 1254-4:1998/AC:1999	COPPER AND COPPER ALLOYS - PLUMBING FITTINGS - PART 4: FITTINGS COMBINING OTHER END CONNECTIONS WITH CAPILLARY OR COMPRESSION ENDS
EN 1057:2006+A1:2010	Copper and copper alloys - Seamless, round copper tubes for water and gas in sanitary and heating applications
EN 1254-1:1998	Copper and copper alloys - Plumbing fittings - Part 1: Fittings with ends for capillary soldering or capillary brazing to copper tubes
EN 1254-2:1998	Copper and copper alloys - Plumbing fittings - Part 2: Fittings with compression ends for use with copper tubes
EN ISO 9002:1994/AC:1997	QUALITY SYSTEMS - SPECIFICATION FOR PRODUCTION AND INSTALLATION
EN 723:2009	Copper and copper alloys - Combustion method for determination of the carbon content on the inner surface of copper tubes or fittings
ISO 9002:1994	Quality systems — Model for quality assurance in production, installation and servicing
EN ISO 9001:2015	Quality management systems - Requirements (ISO 9001:2015)
ISO 6509:1981	Corrosion of metals and alloys Determination of dezincification resistance of brass
ISO 9001:2015	Quality management systems — Requirements
EN 12164:2016	Copper and copper alloys - Rod for free machining purposes
EN ISO 6509 : 1995	CORROSION OF METALS AND ALLOYS - DETERMINATION OF DEZINCIFICATION RESISTANCE OF BRASS
PREN 12449 : DRAFT 2011	COPPER AND COPPER ALLOYS - SEAMLESS, ROUND TUBES FOR GENERAL PURPOSES
ISO 6957:1988	Copper alloys Ammonia test for stress corrosion resistance

Categories associated with this Standard - (Show below) - (Hide below)

Sub-Categories associated with this Standard - (Show below) - (Hide below)

Sorry this product is not available in your region.

Add To Cart