|
EN 294:1992/AC:1993
|
SAFETY OF MACHINERY - SAFETY DISTANCES TO PREVENT DANGER ZONES BEING REACHED BY THE UPPER LIMBS |
|
PREN ISO 3744 : DRAFT 2009
|
ACOUSTICS - DETERMINATION OF SOUND POWER LEVELS OF NOISE SOURCES USING SOUND PRESSURE - ENGINEERING METHOD IN AN ESSENTIALLY FREE FIELD OVER A REFLECTING PLANE |
|
EN 982:1996+A1:2008
|
Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
|
ISO 4871:1996
|
Acoustics — Declaration and verification of noise emission values of machinery and equipment |
|
ISO 5349-2:2001
|
Mechanical vibration Measurement and evaluation of human exposure to hand-transmitted vibration Part 2: Practical guidance for measurement at the workplace |
|
ISO 20643:2005
|
Mechanical vibration — Hand-held and hand-guided machinery — Principles for evaluation of vibration emission |
|
ISO/TR 11688-1:1995
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning |
|
ISO 13732-1:2006
|
Ergonomics of the thermal environment — Methods for the assessment of human responses to contact with surfaces — Part 1: Hot surfaces |
|
ISO 525:2013
|
Bonded abrasive products General requirements |
|
IEC 60204-1:2016
|
Safety of machinery - Electrical equipment of machines - Part 1: General requirements |
|
EN 13218:2002+A1:2008/AC:2010
|
MACHINE TOOLS - SAFETY - STATIONARY GRINDING MACHINES |
|
ISO 6104:2005
|
Superabrasive products — Rotating grinding tools with diamond or cubic boron nitride — General survey, designation and multilingual nomenclature |
|
EN ISO 11688-2 : 2000
|
ACOUSTICS - RECOMMENDED PRACTICE FOR THE DESIGN OF LOW-NOISE MACHINERY AND EQUIPMENT - PART 2: INTRODUCTION TO THE PHYSICS OF LOW-NOISE DESIGN |
|
IEC 61029-1:1990
|
Safety of transportable motor-operated electric tools - Part 1: General requirements |
|
EN ISO 5349-2:2001/A1:2015
|
MECHANICAL VIBRATION - MEASUREMENT AND EVALUATION OF HUMAN EXPOSURE TO HAND-TRANSMITTED VIBRATION - PART 2: PRACTICAL GUIDANCE FOR MEASUREMENT AT THE WORKPLACE (ISO 5349 2:2001/AMD 1:2015) |
|
EN ISO 13732-1:2008
|
Ergonomics of the thermal environment - Methods for the assessment of human responses to contact with surfaces - Part 1: Hot surfaces (ISO 13732-1:2006) |
|
EN ISO 20643:2008/A1:2012
|
Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission - Amendment 1: Accelerometer positions (ISO 20643:2005/Amd 1:2012) |
|
EN ISO 11201:2010
|
Acoustics - Noise emitted by machinery and equipment - Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201:2010) |
|
EN ISO 8041:2005/AC:2008
|
HUMAN RESPONSE TO VIBRATION - MEASURING INSTRUMENTATION |
|
EN ISO 12100-1:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 1: BASIC TERMINOLOGY, METHODOLOGY |
|
ISO 16063-1:1998
|
Methods for the calibration of vibration and shock transducers Part 1: Basic concepts |
|
IEC 60529:1989+AMD1:1999+AMD2:2013 CSV
|
Degrees of protection provided by enclosures (IP Code) |
|
EN 953:1997+A1:2009
|
Safety of machinery - Guards - General requirements for the design and construction of fixed and movable guards |
|
ISO 8041:2005
|
Human response to vibration Measuring instrumentation |
|
ISO 12100-2:2003
|
Safety of machinery Basic concepts, general principles for design Part 2: Technical principles |
|
EN ISO 12100-2:2003/A1:2009
|
SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - PART 2: TECHNICAL PRINCIPLES |
|
EN 206-1:2000/A2:2005
|
CONCRETE - PART 1: SPECIFICATION, PERFORMANCE, PRODUCTION AND CONFORMITY |
|
ISO 6395:2008
|
Earth-moving machinery Determination of sound power level Dynamic test conditions |
|
ISO 12100-1:2003
|
Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
|
EN ISO 13849-1:2015
|
Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design (ISO 13849-1:2015) |
|
ISO 5348:1998
|
Mechanical vibration and shock Mechanical mounting of accelerometers |
|
EN ISO 4871:2009
|
Acoustics - Declaration and verification of noise emission values of machinery and equipment (ISO 4871:1996) |
|
EN 60335-1:2012/A13:2017
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 1: GENERAL REQUIREMENTS (IEC 60335-1:2010, MODIFIED) |
|
EN 61029-1:2009/A11:2010
|
SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS - PART 1: GENERAL REQUIREMENTS |
|
EN 60529:1991/AC:2016-12
|
DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
|
ISO 7000:2014
|
Graphical symbols for use on equipment Registered symbols |
|
EN ISO 11688-1:2009
|
Acoustics - Recommended practice for the design of low-noise machinery and equipment - Part 1: Planning (ISO/TR 11688-1:1995) |
|
EN 60335-2-41:2003/A2:2010
|
HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES - SAFETY - PART 2-41: PARTICULAR REQUIREMENTS FOR PUMPS |
|
ISO 13849-1:2015
|
Safety of machinery — Safety-related parts of control systems — Part 1: General principles for design |
|
ISO/TR 11688-2:1998
|
Acoustics Recommended practice for the design of low-noise machinery and equipment Part 2: Introduction to the physics of low-noise design |
|
ISO 11201:2010
|
Acoustics Noise emitted by machinery and equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections |
|
EN 60204-1 : 2006 COR 2010
|
SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 1: GENERAL REQUIREMENTS |
|
IEC 60335-2-41:2012
|
Household and similar electrical appliances - Safety - Part 2-41: Particular requirements for pumps |