![header thumbnail](/images/img-default-logo.png)
UNI EN 4688 : 2013
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
![header thumbnail](/images/img-default-logo.png)
AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION INHIBITING TWO COMPONENTS COLD CURING PRIMER FOR MILITARY APPLICATION
04-03-2021
01-01-2013
Foreword
1 Scope
2 Normative references
3 Terms and definitions
4 Surface pretreatment
5 Classification
6 Batch release and qualification testing
7 Designation
Specifies the requirements for a two components, high corrosion inhibiting epoxy primer.
DocumentType |
Standard
|
PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
Status |
Superseded
|
SupersededBy |
Standards | Relationship |
EN 4688:2012 | Identical |
ISO 7724-1:1984 | Paints and varnishes Colorimetry Part 1: Principles |
EN 2334 : 1997 | AEROSPACE SERIES - CHROMIC-SULPHURIC ACID PICKLE OF ALUMINIUM AND ALUMINIUM ALLOYS |
EN ISO 4628-2:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 2: Assessment of degree of blistering (ISO 4628-2:2016) |
MIL-PRF-6081 Revision E:2014 | LUBRICATING OIL, JET ENGINE |
EN ISO 4628-8:2012 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 8: Assessment of degree of delamination and corrosion around a scribe or other artificial defect (ISO 4628-8:2012) |
PREN 3847 : 200P2 | AEROSPACE SERIES - PAINTS AND VARNISHES - DETERMINATION OF SEDIMENTATION RATING |
EN 3212 : 1995 | AEROSPACE SERIES - PAINTS AND VARNISHES - CORROSION TEST BY ALTERNATE IMMERSION IN A BUFFERED CHLORIDE SOLUTION |
EN ISO 2431:2011 | Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
EN 4687:2012 | Aerospace series - Paints and varnishes - Chromate free non corrosion inhibiting two components cold curing primer for military application |
MIL-PRF-5606 Revision H:2002 | HYDRAULIC FLUID, PETROLEUM BASE; AIRCRAFT, MISSILE, AND ORDNANCE |
EN ISO 1524:2013 | Paints, varnishes and printing inks - Determination of fineness of grind (ISO 1524:2013) |
SAE AMS 1527 : 2014 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, FOAM-ON, PRESSURE-SPRAYING |
EN ISO 2811-2:2011 | Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
ISO 7724-2:1984 | Paints and varnishes Colorimetry Part 2: Colour measurement |
EN ISO 2409:2013 | Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 4628-10:2016 | Paints and varnishes - Evaluation of degradation of coatings - Designation of quantity and size of defects, and of intensity of uniform changes in appearance - Part 10: Assessment of degree of filiform corrosion (ISO 4628-10:2016, Corrected version 2016-06-01) |
EN ISO 9227:2017 | Corrosion tests in artificial atmospheres - Salt spray tests (ISO 9227:2017) |
DEFSTAN 68-10/5(2003) : 2003 | CORROSION PREVENTIVE: WATER DISPLACING NATO CODE: C-634 JOINT SERVICE DESIGNATION: PX-24 |
EN ISO 3675:1998 | Crude petroleum and liquid petroleum products - Laboratory determination of density - Hydrometer method (ISO 3675:1998) |
EN ISO 3251:2008 | Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
EN ISO 9514:2005 | Paints and varnishes - Determination of the pot life of multicomponent coating systems - Preparation and conditioning of samples and guidelines for testing (ISO 9514:2005) |
EN 4689:2012 | Aerospace series - Paints and varnishes - Two components cold curing polyurethane finish - High flexibility and chemical agent resistance for military application |
EN ISO 2811-1:2016 | Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
EN 2437 : 2001 | AEROSPACE SERIES - CHROMATE CONVERSION COATINGS (YELLOW) FOR ALUMINIUM AND ALUMINIUM ALLOYS |
EN ISO 2811-3:2011 | Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
EN ISO 1513:2010 | Paints and varnishes - Examination and preparation of test samples (ISO 1513:2010) |
ISO 7724-3:1984 | Paints and varnishes Colorimetry Part 3: Calculation of colour differences |
MIL-PRF-23699 Revision G:2014 | Lubricating Oil, Aircraft Turbine Engine, Synthetic Base, NATO Code Numbers: O-152, O-154, O-156, and O-167 |
EN ISO 3680:2004 | Determination of flash/no flash - Rapid equilibrium closed cup method (ISO 3680:2004) |
EN ISO 9117-1:2009 | Paints and varnishes - Drying tests - Part 1: Determination of through-dry state and through-dry time (ISO 9117-1:2009) |
PREN 4160 : 200P1 | AEROSPACE SERIES - NON-METALLIC MATERIALS - PAINTS AND VARNISHES - TEST METHODS - DETERMINATION OF THE EFFECT OF THERMAL EXPOSURE |
EN 2101 : 1991 | AEROSPACE SERIES - CHROMIC ACID ANODIZING OF ALUMINIUM AND WROUGHT ALUMINIUM ALLOYS |
PREN 3837 : 200P1 | AEROSPACE SERIES - PAINTS AND VARNISHES - NATURE AND METHOD FOR SURFACE PREPARATION OF TEST PIECES IN ALUMINIUM ALLOYS |
MIL-DTL-83133 Revision J:2015 | TURBINE FUEL, AVIATION, KEROSENE TYPE, JP-8 (NATO F-34), NATO F-35, AND JP-8+100 (NATO F-37) |
EN ISO 2811-4:2011 | Paints and varnishes - Determination of density - Part 4: Pressure cup method (ISO 2811-4:2011) |
EN ISO 1520:2006 | Paints and varnishes - Cupping test (ISO 1520:2006) |
EN ISO 11890-1:2007 | Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007) |
SAE AMS 1526 : 2008 | CLEANER FOR AIRCRAFT EXTERIOR SURFACES, WATER-MISCIBLE, PRESSURE-SPRAYING TYPE |
ISO 3270:1984 | Paints and varnishes and their raw materials — Temperatures and humidities for conditioning and testing |
EN ISO 1519:2011 | Paints and varnishes - Bend test (cylindrical mandrel) (ISO 1519:2011) |
EN ISO 3679:2015 | Determination of flash no-flash and flash point - Rapid equilibrium closed cup method (ISO 3679:2015) |
SAE AMS 1533 : 2008 | CLEANER FOR EXTERIOR AIRCRAFT SURFACES, GEL-TYPE, SOLVENT-BASE |
EN ISO 1518:2000 | Paints and varnishes - Scratch test (ISO 1518:1992) |
EN ISO 3678:1995 | Paints and varnishes - Print-free test (ISO 3678:1976) |
EN ISO 4623-2:2016 | Paints and varnishes - Determination of resistance to filiform corrosion - Part 2: Aluminium substrates (ISO 4623-2:2016) |
EN 3840:2007 | Aerospace series - Paints and varnishes - Technical specification |
EN ISO 2813:2014 | Paints and varnishes - Determination of gloss value at 20°, 60° and 85° (ISO 2813:2014) |
EN ISO 9117-3:2010 | Paints and varnishes - Drying tests - Part 3: Surface-drying test using ballotini (ISO 9117-3:2010) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.