UNI EN ISO 10440-1 : 2008
Current
The latest, up-to-date edition.
PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES - ROTARY-TYPE POSITIVE-DISPLACEMENT COMPRESSORS - PART 1: PROCESS COMPRESSORS
25-09-2008
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 General
4.1 Pressure design code
4.2 Unit responsibility
4.3 Units of measurement
4.4 Statutory requirements
5 Basic design
5.1 General
5.2 Pressure casing
5.3 Casing connections
5.4 External forces and moments
5.5 Rotating elements
5.6 Shaft seals
5.7 Dynamics
5.8 Bearings
5.9 Bearing housings
5.10 Lube-oil and seal-oil systems
5.11 Materials
5.12 Nameplates and rotation arrows
5.13 Quality
6 Accessories
6.1 Drivers
6.2 Couplings and guards
6.3 Mounting plates
6.4 Controls and instrumentation
6.5 Piping
6.6 Intercoolers and aftercoolers
6.7 Inlet air filters
6.8 Inlet separators
6.9 Pulsation suppressors/silencers for
dry screw compressors
6.10 Special tools
7 Inspection, testing and preparation for
shipment
7.1 General
7.2 Inspection
7.3 Testing
7.4 Preparation for shipment
8 Vendor's data
8.1 General
8.2 Proposals
8.3 Contract data
Annex A (informative) - Typical datasheets
Annex B (informative) - Nomenclature for rotary-type
positive-displacement compressors
Annex C (normative) - Forces and moments
Annex D (normative) - Procedure for determination
of residual unbalance
Annex E (normative) - Typical schematics for pressurized
oil systems for flooded screw compressors
Annex F (informative) - Materials and their specifications
for rotary compressors
Annex G (informative) - Typical mounting plate arrangements
Annex H (informative) - Inspector's checklist
Annex I (informative) - Typical vendor drawing and data
requirements
Bibliography
Describes requirements for dry and oil-flooded, helical-lobe rotary compressors used for vacuum or pressure or both in petroleum, petrochemical, and gas industry services.
| Committee |
CT 700
|
| DocumentType |
Standard
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Supersedes |
| Standards | Relationship |
| NS EN ISO 10440-1 : 2ED 2007 | Identical |
| DIN EN ISO 10440-1:2008-09 | Identical |
| BS EN ISO 10440-1:2001 | Identical |
| SN EN ISO 10440-1:2008 | Identical |
| I.S. EN ISO 10440-1:2007 | Identical |
| ISO 10440-1:2007 | Identical |
| NBN EN ISO 10440-1 : 2008 | Identical |
| NF EN ISO 10440-1 : 2008 | Identical |
| NEN EN ISO 10440-1 : 2008 | Identical |
| EN ISO 10440-1:2007 | Identical |
| ISO 15649:2001 | Petroleum and natural gas industries — Piping |
| API 500 : 2012 | RECOMMENDED PRACTICE FOR CLASSIFICATION OF LOCATIONS FOR ELECTRICAL INSTALLATIONS AT PETROLEUM FACILITIES CLASSIFIED AS CLASS 1, DIVISION 1 AND DIVISION 2 |
| ISO 7005-2:1988 | Metallic flanges — Part 2: Cast iron flanges |
| ISO 3744:2010 | Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods for an essentially free field over a reflecting plane |
| API 661 : 2015 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - AIR-COOLED HEAT EXCHANGERS |
| API 546 : 2008 | BRUSHLESS SYNCHRONOUS MACHINES - 500 KVA AND LARGER |
| IEEE 841-2009 | IEEE Standard for Petroleum and Chemical Industry--Premium-Efficiency, Severe-Duty, Totally Enclosed Fan-Cooled (TEFC) Squirrel Cage Induction Motors--Up to and Including 370 kW (500 hp) |
| ISO 16812:2007 | Petroleum, petrochemical and natural gas industries Shell-and-tube heat exchangers |
| ISO 10437:2003 | Petroleum, petrochemical and natural gas industries — Steam turbines — Special-purpose applications |
| ASTM A 395/A395M : 1999 | Standard Specification for Ferritic Ductile Iron Pressure-Retaining Castings for Use at Elevated Temperatures |
| ISO 1328-1:2013 | Cylindrical gears — ISO system of flank tolerance classification — Part 1: Definitions and allowable values of deviations relevant to flanks of gear teeth |
| AGMA ISO 1328 1 : B2014 | CYLINDRICAL GEARS - ISO SYSTEM OF FLANK TOLERANCE CLASSIFICATION - PART 1: DEFINITIONS AND ALLOWABLE VALUES OF DEVIATIONS RELEVANT TO FLANKS OF GEAR TEETH |
| ISO 724:1993 | ISO general-purpose metric screw threads — Basic dimensions |
| API 614 : 2008 | LUBRICATION, SHAFT-SEALING AND OIL-CONTROL SYSTEMS AND AUXILIARIES |
| ASTM A 516/A516M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Moderate- and Lower-Temperature Service |
| ISO 1940-1:2003 | Mechanical vibration Balance quality requirements for rotors in a constant (rigid) state Part 1: Specification and verification of balance tolerances |
| ISO 6708:1995 | Pipework components Definition and selection of DN (nominal size) |
| ISO 10440-2:2001 | Petroleum and natural gas industries Rotary-type positive-displacement compressors Part 2: Packaged air compressors (oil-free) |
| ISO 281:2007 | Rolling bearings Dynamic load ratings and rating life |
| ISO 1217:2009 | Displacement compressors Acceptance tests |
| ASTM A 351/A351M : 2016-05 | SPECIFICATION FOR CASTINGS, AUSTENITIC, FOR PRESSURE-CONTAINING PARTS |
| ISO 262:1998 | ISO general purpose metric screw threads — Selected sizes for screws, bolts and nuts |
| API 670 : 2014 | MACHINERY PROTECTION SYSTEMS |
| ASTM A 563 : 2015 : REDLINE | Standard Specification for Carbon and Alloy Steel Nuts |
| ISO 8821:1989 | Mechanical vibration Balancing Shaft and fitment key convention |
| ANSI S2.19 : 0 | MECHANICAL VIBRATION - BALANCE QUALITY REQUIREMENTS OF RIGID ROTORS - PART 1: DETERMINATION OF PERMISSIBLE RESIDUAL UNBALANCE, INCLUDING MARINE APPLICATIONS |
| API 660 : 2015 | SHELL-AND-TUBE HEAT EXCHANGERS |
| ISO 13691:2001 | Petroleum and natural gas industries — High-speed special-purpose gear units |
| NFPA 70 : 2017 | NATIONAL ELECTRICAL CODE |
| EN 1563:2011 | Founding - Spheroidal graphite cast irons |
| API 526 : 2017 | FLANGED STEEL PRESSURE-RELIEF VALVES |
| ASTM A 105/A105M : 2014-11 | SPECIFICATION FOR CARBON STEEL FORGINGS FOR PIPING APPLICATIONS |
| API 612 : 2014 | PETROLEUM, PETROCHEMICAL, AND NATURAL GAS INDUSTRIES - STEAM TURBINES - SPECIAL-PURPOSE APPLICATIONS |
| ISO 261:1998 | ISO general purpose metric screw threads — General plan |
| API STD 541 : 2014 | FORM-WOUND SQUIRREL CAGE INDUCTION MOTORS - 375 KW (500 HORSEPOWER) AND LARGER |
| ISO 5753:1991 | Rolling bearings — Radial internal clearance |
| API 686 : 2009 | RECOMMENDED PRACTICE FOR MACHINERY INSTALLATION AND INSTALLATION DESIGN |
| NFPA 30 : 2018 | FLAMMABLE AND COMBUSTIBLE LIQUIDS CODE |
| ISO 13706:2011 | Petroleum, petrochemical and natural gas industries — Air-cooled heat exchangers |
| API 683 : 1993 | QUALITY IMPROVEMENT MANUAL FOR MECHANICAL EQUIPMENT IN PETROLEUM, CHEMICAL, AND GAS INDUSTRIES |
| ISO 7005-1:2011 | Pipe flanges — Part 1: Steel flanges for industrial and general service piping systems |
| ISO 10441:2007 | Petroleum, petrochemical and natural gas industries Flexible couplings for mechanical power transmission Special-purpose applications |
| ASTM E 709 : 2015 : REDLINE | Standard Guide for Magnetic Particle Testing |
| AWS D1.1/D1.1M : 2015 | STRUCTURAL WELDING CODE-STEEL |
| ASTM A 515/A515M : 2017 : REDLINE | Standard Specification for Pressure Vessel Plates, Carbon Steel, for Intermediate- and Higher-Temperature Service |
| ASTM A 312/A312M : 2017-03 | SPECIFICATION FOR SEAMLESS, WELDED, AND HEAVILY COLD WORKED AUSTENITIC STAINLESS STEEL PIPES |
| ISO 3448:1992 | Industrial liquid lubricants — ISO viscosity classification |
| API 619 : 2010 | ROTARY-TYPE POSITIVE DISPLACEMENT COMPRESSORS FOR PETROLEUM, PETROCHEMICAL AND NATURAL GAS INDUSTRIES |
| EN 1561:2011 | Founding - Grey cast irons |
| ISO 945:1975 | Cast iron — Designation of microstructure of graphite |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.