UNI ISO/TR 18532 : 2010
Current
Current
The latest, up-to-date edition.
Guide to the application of statistical methods for quality and standardization in the industrial sector
Published date
15-04-2010
Sorry this product is not available in your region.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Illustration of value and role of statistical method
through examples
5 Introduction to basic statistical tools
6 Variation and sampling considerations
7 Methods of conformity assessment
8 The statistical relationship between sample and population
9 Acceptance sampling
10 Statistical process control (SPC)
11 Process capability
12 Statistical experimentation and standards
13 Measuring systems
Annex A (informative) - Measured data control charts:
Formulae and constants
Bibliography
Index
The technical report describes a wide range of statistical methods applicable to management, monitoring and process improvement activities.
| Committee |
CT 16
|
| DocumentType |
Technical Report
|
| PublisherName |
Ente Nazionale Italiano di Unificazione (UNI)
|
| Status |
Current
|
| Standards | Relationship |
| ISO/TR 18532:2009 | Identical |
| ISO 5725-1:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 1: General principles and definitions |
| ISO Guide 32:1997 | Calibration in analytical chemistry and use of certified reference materials |
| ISO 3951-4:2011 | Sampling procedures for inspection by variables — Part 4: Procedures for assessment of declared quality levels |
| ISO 3951-1:2013 | Sampling procedures for inspection by variables — Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL |
| ISO 2859-4:2002 | Sampling procedures for inspection by attributes Part 4: Procedures for assessment of declared quality levels |
| ISO 10725:2000 | Acceptance sampling plans and procedures for the inspection of bulk materials |
| ISO 2859-3:2005 | Sampling procedures for inspection by attributes — Part 3: Skip-lot sampling procedures |
| ISO 7873:1993 | Control charts for arithmetic average with warning limits |
| ISO/TR 10017:2003 | Guidance on statistical techniques for ISO 9001:2000 |
| ISO 2854:1976 | Statistical interpretation of data — Techniques of estimation and tests relating to means and variances |
| ISO 16269-7:2001 | Statistical interpretation of data — Part 7: Median — Estimation and confidence intervals |
| IEC 61649:2008 | Weibull analysis |
| ISO 3082:2017 | Iron ores — Sampling and sample preparation procedures |
| ISO/TR 9007:1987 | Information processing systems Concepts and terminology for the conceptual schema and the information base |
| ISO 2859:1974 | Sampling procedures and tables for inspection by attributes |
| MIL-STD-1235 Revision C:1988 | SINGLE AND MULTILEVEL CONTINUOUS SAMPLING PROCEDURES AND TABLES FOR INSPECTION BY ATTRIBUTES FUNCTIONAL CURVES OF THE CONTINUOUS SAMPLING PLANS |
| ISO/TS 21749:2005 | Measurement uncertainty for metrological applications — Repeated measurements and nested experiments |
| ISO 7870-1:2014 | Control charts Part 1: General guidelines |
| ISO/TR 22971:2005 | Accuracy (trueness and precision) of measurement methods and results Practical guidance for the use of ISO 5725-2:1994 in designing, implementing and statistically analysing interlaboratory repeatability and reproducibility results |
| ISO/TS 16949:2009 | Quality management systems Particular requirements for the application of ISO 9001:2008 for automotive production and relevant service part organizations |
| EN 12603:2002 | Glass in building - Procedures for goodness of fit and confidence intervals for Weibull distributed glass strength data |
| ISO 5725-3:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 3: Intermediate measures of the precision of a standard measurement method |
| ISO Guide 33:2015 | Reference materials — Good practice in using reference materials |
| ISO 10014:2006 | Quality management Guidelines for realizing financial and economic benefits |
| ISO 11648-2:2001 | Statistical aspects of sampling from bulk materials — Part 2: Sampling of particulate materials |
| MIL-STD-1916 Base Document:1996 | DOD PREFERRED METHODS FOR ACCEPTANCE OF PRODUCT |
| ISO 10576-1:2003 | Statistical methods — Guidelines for the evaluation of conformity with specified requirements — Part 1: General principles |
| ISO 2859-2:1985 | Sampling procedures for inspection by attributes — Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection |
| ISO 5725-6:1994 | Accuracy (trueness and precision) of measurement methods and results — Part 6: Use in practice of accuracy values |
| ISO Guide 35:2017 | Reference materials — Guidance for characterization and assessment of homogeneity and stability |
| ISO 5725-4:1994 | Accuracy (trueness and precision) of measurement methods and results Part 4: Basic methods for the determination of the trueness of a standard measurement method |
| ISO 11095:1996 | Linear calibration using reference materials |
| ISO 11648-1:2003 | Statistical aspects of sampling from bulk materials — Part 1: General principles |
| ISO 3084:1998 | Iron ores — Experimental methods for evaluation of quality variation |
| ISO 14560:2004 | Acceptance sampling procedures by attributes Specified quality levels in nonconforming items per million |
| ISO 2602:1980 | Statistical interpretation of test results Estimation of the mean Confidence interval |
| ISO/IEC Guide 99:2007 | International vocabulary of metrology Basic and general concepts and associated terms (VIM) |
| ISO 21247:2005 | Combined accept-zero sampling systems and process control procedures for product acceptance |
| ISO 8422:2006 | Sequential sampling plans for inspection by attributes |
| ISO 16269-6:2014 | Statistical interpretation of data — Part 6: Determination of statistical tolerance intervals |
| ISO/TR 22514-4:2007 | Statistical methods in process management Capability and performance Part 4: Process capability estimates and performance measures |
| ISO 3301:1975 | Statistical interpretation of data — Comparison of two means in the case of paired observations |
| ISO 3534-2:2006 | Statistics — Vocabulary and symbols — Part 2: Applied statistics |
| ISO/TS 21748:2004 | Guidance for the use of repeatability, reproducibility and trueness estimates in measurement uncertainty estimation |
| ISO/TR 13425:2006 | Guidelines for the selection of statistical methods in standardization and specification |
| ISO 9004:2009 | Managing for the sustained success of an organization A quality management approach |
| ISO 22514-3:2008 | Statistical methods in process management Capability and performance Part 3: Machine performance studies for measured data on discrete parts |
| ISO 7966:1993 | Acceptance control charts |
| ISO 8423:2008 | Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation) |
| ISO 2859-10:2006 | Sampling procedures for inspection by attributes Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes |
| ISO 3494:1976 | Statistical interpretation of data — Power of tests relating to means and variances |
| ISO 10012:2003 | Measurement management systems — Requirements for measurement processes and measuring equipment |
| ISO 3951-3:2007 | Sampling procedures for inspection by variables Part 3: Double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection |
| ISO 5725-2:1994 | Accuracy (trueness and precision) of measurement methods and results Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method |
| ISO 9001:2015 | Quality management systems — Requirements |
| ISO 3534-3:2013 | Statistics — Vocabulary and symbols — Part 3: Design of experiments |
| ISO 18414:2006 | Acceptance sampling procedures by attributes Accept-zero sampling system based on credit principle for controlling outgoing quality |
| ISO 5479:1997 | Statistical interpretation of data — Tests for departure from the normal distribution |
| ISO 16269-8:2004 | Statistical interpretation of data — Part 8: Determination of prediction intervals |
| ISO 11462-1:2001 | Guidelines for implementation of statistical process control (SPC) Part 1: Elements of SPC |
| EN 12326-1:2014 | Slate and stone for discontinuous roofing and external cladding - Part 1: Specifications for slate and carbonate slate |
| ISO 3951-5:2006 | Sampling procedures for inspection by variables Part 5: Sequential sampling plans indexed by acceptance quality limit (AQL) for inspection by variables (known standard deviation) |
| ISO/TR 7871:1997 | Cumulative sum charts Guidance on quality control and data analysis using CUSUM techniques |
| ISO 5725-5:1998 | Accuracy (trueness and precision) of measurement methods and results — Part 5: Alternative methods for the determination of the precision of a standard measurement method |
| ISO 3951-2:2013 | Sampling procedures for inspection by variables — Part 2: General specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection of independent quality characteristics |
| ISO/IEC Guide 98-3:2008 | Uncertainty of measurement — Part 3: Guide to the expression of uncertainty in measurement (GUM:1995) |
| ISO 3534-1:2006 | Statistics — Vocabulary and symbols — Part 1: General statistical terms and terms used in probability |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.