• Shopping Cart
    There are no items in your cart

VDE 0118-2 : 2010

Superseded

Superseded

A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.

View Superseded by

ERRICHTEN ELEKTRISCHER ANLAGEN IM BERGBAU UNTER TAGE - TEIL 2: ZUSATZFESTLEGUNGEN

Superseded date

01-11-2016

Superseded by

VDE 0118-10 : 2016-11

Published date

12-01-2013

Sorry this product is not available in your region.

Vorwort
1 Anwendungsbereich
2 Normative Verweisungen
3 Begriffe
4 Elektrische Maschinen
5 Arbeitsmagnete
6 Leistungstransformatoren
7 Induktive Spannungswandler
8 Kondensatoranlagen
9 Schweissgeräte
10 Heiz- und Widerstandsgeräte
11 Ortsveränderliche Betriebsmittel
12 Schalter und Schaltgeräte
13 Fernbetätigte Schaltgeräte
14 Sicherungen
15 Steckvorrichtungen und Steckverbinder
16 Schaltanlagen
17 Trennvorrichtungen vor Schaltanlagen
18 Hilfsstromkreise
19 Leuchten und Beleuchtungsanlagen
20 Kabel und Leitungen
21 Schutz elektrischer Betriebsmittel gegen Überströme
22 Kurzschlussstromberechnung
23 Sprengzündanlagen mit Netzverbindung
24 Stromrichter
25 Zusätzliche Anforderungen an Netze und Betriebsmittel
   mit einer Nennspannung über 1 kV bis 6 kV in Abbau-
   und Ortsbetrieben
26 Grubenverkehrs-Signalanlagen
Anhang A (normativ) Strombelastbarkeit von Leitern eines
         Kabels oder einer Leitung in Fernmeldeanlagen in
         Abhängigkeit von der Umgebungstemperatur und
         bei gleichzeitig dauernd belasteten Leitern
Anhang B (normativ) Strombelastbarkeit von gebündelten
         PVC-Aderleitungen in Gehäusen oder in
         Elektro-Installationskanälen, in Abhängigkeit
         vom Nennquerschnitt bei einer Umgebungstemperatur
         von 40 grad C und dauernder Belastung
Anhang C (informativ) Ausführungsbeispiele für ein galvanisch
         getrenntes Netz in Abbau- und Ortsbetrieben
Bilder
Tabellen

Diese Norm regelt Zusatzfestlegungen für bestimmte Anlagen und Betriebsmittel.

DevelopmentNote
Supersedes VDE V 0118-2. (02/2010)
DocumentType
Standard
PublisherName
Verband Deutscher Elektrotechniker
Status
Superseded
SupersededBy
Supersedes

Standards Relationship
DIN VDE 0118-2 : 2010 Identical

VDE 0118-1 : 2010 ERRICHTEN ELEKTRISCHER ANLAGEN IM BERGBAU UNTER TAGE - TEIL 1: ALLGEMEINE FESTLEGUNGEN
VDE 0118-3 : 2001 ERECTION OF POWER INSTALLATIONS IN MINES - SUPPLEMENTARY REQUIREMENTS FOR TELECOMMUNICATION INSTALLATIONS

VDE 0102 : 2016 SHORT-CIRCUIT CURRENTS IN THREE-PHASE A.C. SYSTEMS - PART 0: CALCULATION OF CURRENTS (IEC 60909-0:2016)
VDE 0118-1 : 2010 ERRICHTEN ELEKTRISCHER ANLAGEN IM BERGBAU UNTER TAGE - TEIL 1: ALLGEMEINE FESTLEGUNGEN
VDE 0250-809 : 1985 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - FLAT ORDINARY TOUGH-POLYCHLOROPRENE-SHEATHED FLEXIBLE CABLE
VDE 0670-1000 : 2002 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR STANDARDS
VDE 0250-204 : 2000
VDE 0105-111 : 2000 OPERATION OF ELECTRICAL INSTALLATIONS - PART 111: PARTICULAR REQUIREMENTS FOR UNDERGROUND MINES
DIN VDE 0110-1 : 1997 INSULATION COORDINATION FOR EQUIPMENT WITHIN LOW-VOLTAGE SYSTEMS - PART 1: PRINCIPLES, REQUIREMENTS AND TESTS
DIN EN 60694 : 2002 COMMON SPECIFICATIONS FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROL GEAR STANDARDS
VDE 0560-410 : 2015 SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1000 V - PART 1: GENERAL (IEC 60871-1:2014)
DIN VDE 0250-813 : 1985 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION; TRAILING CABLE
VDE 0623-1 : 2013 COR 1 2014 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 + A1:2005 + A2:2012)
VDE 0282-6 : 2005 STARKSTROMLEITUNGEN MIT VERNETZTER ISOLIERHUELLE FUER NENNSPANNUNGEN BIS 450/750 V - TEIL 6: LICHTBOGENSCHWEISSLEITUNGEN
VDE 0298-4 : 2013 Application of cables and cords in power installations – Part 4: Recommended current-carrying capacity for sheathed and nonsheathed cables for fixed wirings in and around buildings and for flexible cables and cords<br>
DIN VDE 0472-803 : 1986 TESTING OF CABLES, WIRES AND FLEXIBLE CORDS - OIL IMMERSION
DIN EN 60076-1 : 2012 POWER TRANSFORMERS - PART 1: GENERAL (IEC 60076-1:2011)
DIN EN 60974-1 : 2013 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012)
DIN VDE 0250-602 : 1985 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION; SPECIAL RUBBER-INSULATED SINGLE-CORE CABLES
VDE 0271 : 2007 COR 1 2008 STARKSTROMKABEL - FESTLEGUNGEN FUER STARKSTROMKABEL AB 0,6/1 KV FUER BESONDERE ANWENDUNGEN
VDE 0670-6 : 98 COR 2 2001 AC METAL-ENCLOSED SWITCHGEAR AND CONTROLGEAR FOR RATED VOLTAGES ABOVE 1 KV AND UP TO AND INCLUDING 52 KV
DIN EN 50178 : 1998-04 ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS
VDE 0291-2 : 1979 COMPOUNDS FOR USE IN CABLE ACCESSORIES - CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE
VDE 0250-813 : 1985 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - TRAILING CABLE
VDE 0276-1000 : 1995 POWER CABLES - CURRENT-CARRYING CAPACITY, GENERAL, CONVERSION FACTORS
VDE 0160 : 1998-04 ELECTRONIC EQUIPMENT FOR USE IN POWER INSTALLATIONS
VDE 0279 : 1982 ACCESSORIES FOR UNDERGROUND MINING CABLES - JOINT BOXED U[0]/U = 0.6/1 KV
DIN EN 60742 : 1995 ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS
DIN VDE 0250-812 : 1985 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION; RUBBER INSULATED FLEXIBLE CABLE NSSHOEU
VDE 0660-500 : 2005 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
DIN VDE 0276-1000 : 1995 POWER CABLES - PART 1000: CURRENT-CARRYING CAPACITY, GENERAL, CONVERSION FACTORS
VDE 0281-3 : 2001 AMD 2 2009 POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON SHEATHED CABLES FOR FIXED WIRING
DIN VDE 0250-809 : 1985 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION; FLAT ORDINARY TOUGH-POLYCHLOREPRENE-SHEATHED FLEXIBLE CABLE
VDE 0532-101 : 97 AMD 1 2001 POWER TRANSFORMERS - PART 1: GENERAL
VDE 0250-602 : 1985 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - SPECIAL RUBBER-INSULATED SINGLE-CORE CABLES
DIN VDE 0105-111 : 2000 OPERATION OF ELECTRICAL INSTALLATIONS - PART 111: PARTICULAR REQUIREMENTS FOR UNDERGROUND MINES
VDE 0544-1 : 2013 ARC WELDING EQUIPMENT - PART 1: WELDING POWER SOURCES (IEC 60974-1:2012)
VDE 0532-10 : 1982 TRANSFORMERS AND REACTORS - APPLICATION OF TRANSFORMERS
DIN VDE 0532-10 : 1982 TRANSFORMERS AND REACTORS APPLICATION OF TRANSFORMERS
DIN VDE 0298-4 : 1998 APPLICATION OF CABLES AND CORDS IN POWER INSTALLATIONS - PART 4: RECOMMENDED CURRENT-CARRYING CAPACITY FOR SHEATHED AND NONSHEATHED CABLES FOR FIXED WIRINGS IN AND AROUND BUILDINGS AND FOR FLEXIBLE CABLES AND CORDS
VDE 0250-212:1982-06 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - SCREENED PVC-CABLES U[0]/U 3,6/6 KV
DIN VDE 0298-3 : 2006-06 APPLICATION OF CABLES AND CORDS IN POWER INSTALLATIONS - PART 3: GUIDE TO USE OF NON-HARMONIZED CABLES
VDE 0101 : 2000 POWER INSTALLATIONS EXCEEDING 1 KV
VDE 0472-803 : 1986 TESTING OF CABLES, WIRES & FLEXIBLE CORDS - OIL IMMERSION
VDE 0282-4 : 2005 COR 1 2005 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSSLINKED INSULATION - 4: CORDS AND FLEXIBLE CABLES
DIN VDE 0101 : 2000 POWER INSTALLATIONS EXCEEDING 1 KV
DIN VDE 0250-204 : 2000 CABLES, WIRES AND CORDS FOR POWER INSTALLATION - PVC-INSTALLATION CABLE NYM
DIN VDE 0118-1 : 2010 ERECTION OF ELECTRICAL INSTALLATIONS IN MINES - PART 1: GENERAL REQUIREMENTS
DIN VDE 0250-212 : 1982 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATIONS - SCREENED PVC-CABLES
DIN VDE 0279 : 1982 ACCESSORIES FOR UNDERGROUND MINING CABLES - JOINT BOXES U[0]/U = 0,6/1 KV
DIN VDE 0282-6 : 2005 CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V AND HAVING CROSS-LINKED INSULATION - PART 6: ARC WELDING CABLES
DIN VDE 0102 : 1990 SHORT-CIRCUIT CURRENT CALCULATION IN THREE-PHASE A.C. SYSTEMS
VDE 0113-32 : 2009-03 SAFETY OF MACHINERY ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
DIN EN 60309-1 : 2013 COR 1 2014 PLUGS, SOCKET-OUTLETS AND COUPLERS FOR INDUSTRIAL PURPOSES - PART 1: GENERAL REQUIREMENTS (IEC 60309-1:1999 + A1:2005 + A2:2012)
DIN EN 60439-1 : 2005 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES - PART 1: TYPE-TESTED AND PARTIALLY TYPE-TESTED ASSEMBLIES
VDE 0298-3 : 2006-06 Application of cables and cords in power installations – Part 3: Guide to use of non-harmonized cables
VDE 0250-812 : 1985 CABLES, WIRES AND FLEXIBLE CORDS FOR POWER INSTALLATION - RUBBER INSULATED FLEXIBLE CABLE NSSHOEU
DIN VDE 0291-2 : 1979 COMPOUNDS FOR USE IN CABLE ACCESSORIES; CASTING RESINOUS COMPOUNDS BEFORE CURE AND IN THE CURED STATE
DIN VDE 0281-3 : 2001 AMD 2 2009 POLYVINYL CHLORIDE INSULATED CABLES OF RATED VOLTAGES UP TO AND INCLUDING 450/750 V - PART 3: NON SHEATHED CABLES FOR FIXED WIRING
DIN EN 60871-1 : 2015 SHUNT CAPACITORS FOR A.C. POWER SYSTEMS HAVING A RATED VOLTAGE ABOVE 1 000 V - PART 1: GENERAL (IEC 60871-1:2014)
DIN 20499:2007-01 RAIL HAULAGE ROADS IN MINES - GENERAL NILES
DIN EN 60865-1 : 2012-09 SHORT-CIRCUIT CURRENTS - CALCULATION OF EFFECTS - PART 1: DEFINITIONS AND CALCULATION METHODS (IEC 60865-1:2011)
DIN EN 60204-32 : 2009-03 SAFETY OF MACHINERY - ELECTRICAL EQUIPMENT OF MACHINES - PART 32: REQUIREMENTS FOR HOISTING MACHINES
DIN VDE 0271 : 2007 COR 1 2008 POWER CABLES - SPECIFICATIONS FOR POWER CABLES 0,6/1 KV AND ABOVE FOR SPECIAL APPLICATIONS
VDE 0551 : 1995 ISOLATING TRANSFORMERS AND SAFETY ISOLATING TRANSFORMERS - REQUIREMENTS

Access your standards online with a subscription

Features

  • Simple online access to standards, technical information and regulations.

  • Critical updates of standards and customisable alerts and notifications.

  • Multi-user online standards collection: secure, flexible and cost effective.