Skip to content
Please enter a keyword to search

  • VDI 2200:2007-06

    Current The latest, up-to-date edition.

    Tight flange connections - Selection, calculation, design and assembly of bolted flange connections

    Available format(s):  Hardcopy, PDF

    Language(s):  German - English

    Published date:  01-06-2007

    Publisher:  Verlag des Vereins Deutscher Ingenieure

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Preliminary note
    Introduction
    1 Scope
    2 Terms and definitions
    3 Symbols and abbreviations
    4 Flange joint construction basics
    5 Calculation of flange joints
    6 Assembly of flange joints
    7 Operational leakage measurement
    8 Demands on flange joints from
      other standards and policies
    Annex A - Blowout safety test
    Annex B - Component test in terms of
              TA Luft and VDI 2440
    Annex C - No-go criteria of the test
              in respect of the accomplishment or
              non-compliance of the leak tightness
              requirements according to TA Luft
              and VDI 2440
    Annex - D Media test
    Bibliography

    Abstract - (Show below) - (Hide below)

    Pertains to analyze and organize the applicable seal connection conditions based on the technical standard.

    General Product Information - (Show below) - (Hide below)

    Document Type Standard
    Publisher Verlag des Vereins Deutscher Ingenieure
    Status Current
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    VDI/VDE 2862 Blatt 2:2015-02 Minimum requirements for application of fastening systems and tools - Applications in plant construction, mechanical engineering, equipment manufacturing and for flange connections in components under pressure boundary
    BS EN 1591-1:2013 Flanges and their joints. Design rules for gasketed circular flange connections Calculation
    EN 1591-1:2013 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
    VDI 3479:2010-08 Emission control - Marketing installation tank farms
    UNE-EN 1591-1:2014 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
    VDI 2290:2012-06 Emission control - Sealing constants for flange connections

    Standards Referencing This Book - (Show below) - (Hide below)

    DVGW G 260 : 2013 GAS QUALITY
    EN 1759-3:2003/AC:2004 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 3: COPPER ALLOY FLANGES
    EN 1514-1:1997 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
    DIN EN 12560-7:2004-09 Flanges and their joints - Gaskets for class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
    DIN 50900-2:2002-06 CORROSION OF METALS - TERMS - PART 2: ELECTROCHEMICAL TERMS
    EN 12560-6:2003 Flanges and their joints - Gaskets for Class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
    DIN EN 1514-2:2014-12 Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
    EN 1515-1:1999 Flanges and their joints - Bolting - Part 1: Selection of bolting
    EN 12560-1:2001 Flanges and their joints - Gaskets for Class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts
    EN 1591-1:2013 Flanges and their joints - Design rules for gasketed circular flange connections - Part 1: Calculation
    EN 12560-3:2001 Flanges and their joints - Gaskets for Class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
    DIN EN 1092-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 3: Copper alloy flanges; German version EN 1092-3:2003 + AC:2004
    DIN EN 12560-2:2013-12 Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
    DIN EN 12560-3:2001-04 Flanges and their joints - Gaskets for class-designated flanges - Part 3: Non-metallic PTFE envelope gaskets; German version EN 12560-3:2001
    DIN V ENV 1591-2:2001-10 FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - PART 2: GASKET PARAMETERS
    DIN 2695:2002-11 Diaphragm-weld packings and weld ring seals for flange connections
    ENV 1591-2 : DRAFT 2001 FLANGES AND THEIR JOINTS - DESIGN RULES FOR GASKETED CIRCULAR FLANGE CONNECTIONS - GASKET PARAMETERS
    EN 12560-2:2013 Flanges and their joints - Dimensions of gaskets for Class-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
    EN 1759-1:2004 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    EN 1514-7:2004 Flanges and their joints - Gaskets for PN-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
    DIN EN 1759-4:2003-12 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, CLASS DESIGNATED - PART 4: ALUMINIUM ALLOY FLANGES
    EN 12560-4:2001 Flanges and their joints - Gaskets for Class-designated flantes - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
    AD MERKBLATT B7 : 1986 DESIGN - SCREWS
    EN 1759-4:2003 Flanges and their joint - Circular flanges for pipes, valves, fittings and accessories, class designated - Part 4: Aluminium alloy flanges
    EN 1092-3:2003/AC:2007 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 3: COPPER ALLOY FLANGES
    EN ISO 178:2010/A1:2013 PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013)
    EN 12266-2:2012 Industrial valves - Testing of metallic valves - Part 2: Tests, test procedures and acceptance criteria - Supplementary requirements
    DIN 28091-2:2014-11 TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 2: REQUIREMENTS AND TESTING FOR FIBRE-BASED GASKET MATERIALS (FA)
    KTA 3201.2 : 2013 COMPONENTS OF THE REACTOR COOLANT PRESSURE BOUNDARY OF LIGHT WATER REACTORS - PART 2: DESIGN AND ANALYSIS
    DIN 28090-1:1995-09 STATIC GASKETS FOR FLANGE CONNECTIONS - PART 1: CHARACTERISTIC VALUES AND TEST PROCEDURES
    DIN EN ISO 10497:2010-06 Testing of valves - Fire type-testing requirements (ISO 10497:2010); German version EN ISO 10497:2010
    EN 1514-6:2003 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
    AD MERKBLATT B8 : 1998 DESIGN - FLANGES
    DIN EN 1514-1:1997-08 FLANGES AND THEIR JOINTS - DIMENSIONS OF GASKET FOR PN-DESIGNATED FLANGES - PART 1: NON-METALLIC FLAT GASKETS WITH OR WITHOUT INSERTS
    DIN EN 12560-6:2004-03 Flanges and their joints - Gaskets for class-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges
    EN 12266-1:2012 Industrial valves - Testing of metallic valves - Part 1: Pressure tests, test procedures and acceptance criteria - Mandatory requirements
    EN 1515-2:2001 Flanges and their joints - Bolting - Part 2: Classification of bolt materials for steel flanges, PN designated
    EN 1514-2:2014 Flanges and their joints - Gaskets for PN-designated flanges - Part 2: Spiral wound gaskets for use with steel flanges
    EN 1092-4:2002 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 4: Aluminium alloy flanges
    EN 12560-7:2004 Flanges and their joints - Gaskets for Class-designated flanges - Part 7: Covered metal jacketed gaskets for use with steel flanges
    ISO 175:2010 Plastics Methods of test for the determination of the effects of immersion in liquid chemicals
    DIN EN 12560-4:2001-04 Flanges and their joints - Gaskets for class-designated flanges - Part 4: Corrugated, flat or grooved metallic and fillet metallic gaskets for use with steel flanges; German version EN 12560-4:2001
    EN 1514-4:1997 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 4: Corrugated, flat or grooved metallic and filled metallic gaskets for use with steel flanges
    DIN EN 12560-1:2001-04 Flanges and their joints - Gaskets for class-designated flanges - Part 1: Non-metallic flat gaskets with or without inserts; German version EN 12560-1:2001
    DIN 3535-6:2011-01 GASKETS FOR GAS SUPPLY - PART 6: GASKET MATERIALS BASED ON FIBRES, GRAPHITE OR POLYTETRAFLUOROETHYLENE (PTFE) FOR GAS VALVES, GAS APPLIANCES AND GAS MAINS
    DVGW VP 401 : 1998 SEALS WITH HIGHER THERMAL RESISTANCE FOR UNIONS AND FLANGES IN CONNECTION WITH METERS AND PRESSURE REGULATORS
    DIN EN 12560-5:2001-04 Flanges and their joints - Gaskets for class-designated flanges - Part 5: Metallic ring-joint gaskets for use with steel flanges; German version EN 12560-5:2001
    DIN EN 1514-6:2004-03 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 6: Covered serrated metal gaskets for use with steel flanges; German version EN 1514-6:2003
    EN ISO 10497:2010 Testing of valves - Fire type-testing requirements (ISO 10497:2010)
    DIN EN 13555:2014-07 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
    DIN 2512:1999-08 FLANGES - TONGUE AND GROOVE, PN 160 - DESIGN SIZES - RINGS PN 10 TO PN 160
    ISO 10497:2010 Testing of valves — Fire type-testing requirements
    DIN 28091-4:2014-11 TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 4: REQUIREMENTS AND TESTING FOR EXPANDED GRAPHITE-BASED GASKET MATERIALS (GR)
    EN 1514-3:1997 Flanges and their joints - Dimensions of gaskets for PN-designated flanges - Part 3: Non-metallic PTFE envelope gaskets
    DIN EN 1092-4:2002-08 FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 4: ALUMINIUM ALLOY FLANGES
    DIN EN 1759-1:2005-02 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 1: Steel flanges, NPS 1/2 to 24
    EN 12560-5:2001 Flanges and their joints - Gaskets for Class-designated flanes - Part 5: Metallic ring joint gaskets for use with steel flanges
    DIN 52913:2002-04 TESTING OF STATIC GASKETS FOR FLANGE CONNECTIONS - COMPRESSION CREEP TESTING OF GASKETS MADE FROM SHEETS
    BS 6755-1:1986 Testing of valves Specification for production pressure testing requirements
    DIN 28091-3:2014-11 TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 3: REQUIREMENTS AND TESTING FOR PTFE-BASED GASKET MATERIALS (TF)
    EN 1092-2:1997 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, PN designated - Part 2: Cast iron flanges
    ISO 178:2010 Plastics Determination of flexural properties
    DIN 28091-1:2014-11 TECHNICAL DELIVERY CONDITIONS FOR GASKET SHEETS - PART 1: GENERAL REQUIREMENTS FOR GASKET MATERIALS
    DIN EN 1092-1:2016-05 (Draft) FLANGES AND THEIR JOINTS - CIRCULAR FLANGES FOR PIPES, VALVES, FITTINGS AND ACCESSORIES, PN DESIGNATED - PART 1: STEEL FLANGES
    DIN 2696:1999-08 Lenticular ring joint gaskets for flanged joints
    EN ISO 175:2010 Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010)
    EN 13555:2014 Flanges and their joints - Gasket parameters and test procedures relevant to the design rules for gasketed circular flange connections
    DIN EN 1759-3:2004-10 Flanges and their joints - Circular flanges for pipes, valves, fittings and accessories, Class designated - Part 3: Copper alloy flanges; German version EN 1759-3:2003 + AC:2004
    BS 6755-2:1987 Testing of valves Specification for fire type-testing requirements
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective