Skip to content
Please enter a keyword to search

  • VDI 3456:2009-12

    View superseded by
    Superseded A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
    View superseded by

    Emission control - Refinishing and finishing of vehicles

    Available format(s):  Hardcopy, PDF

    Superseded date:  08-04-2022

    Language(s):  German - English

    Published date:  01-12-2009

    Publisher:  Verlag des Vereins Deutscher Ingenieure

    Add To Cart

    Table of Contents - (Show below) - (Hide below)

    Preliminary note
    Introduction
    1. Scope
    2. Terms and definitions
    3. Technology
    4. Measures for emission control
    5. Emission limits
    6. Instructions for calculating emissions and
        VOC values
    7. Other effects on the environment (solid
        and liquid waste, noise, soil contamination)
    8. Energy saving measures
    9. Occupational health and safety and accident
        prevention
    10. Future technical measures for reducing
        emissions and saving energy
    Annex - Example of a reduction scheme and proof of
            compliance by means of a solvent management plan
    Bibliography

    Abstract - (Show below) - (Hide below)

    Describes the covers paint applications for vehicles governed by Directive 2007/46/EC (supersedes Directive 70/156/EEC) in the version that is currently in force.

    General Product Information - (Show below) - (Hide below)

    Development Note DRAFT 2017 issued in February 2017. (02/2017)
    Document Type Standard
    Publisher Verlag des Vereins Deutscher Ingenieure
    Status Superseded
    Superseded By
    Supersedes

    Standards Referenced By This Book - (Show below) - (Hide below)

    VDI 3457:2016-06 Emission control - Powder coating
    VDI 4075 Blatt 2:2015-08 Cleaner production (PIUS) - Painting processes
    VDI 3455:2013-08 Emission control - High-volume car body painting plants
    VDI 3781 Blatt 4:2017-07 Environmental meteorology - Discharge conditions for exhaust gases - Small and medium combustion systems and other installations

    Standards Referencing This Book - (Show below) - (Hide below)

    EN 12921-2:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids
    BGI 509 : 2009
    VDI 2448 Blatt 1:1992-04 Planning of spot sampling measurements of stationary source emissions
    EN 14387:2004+A1:2008 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking
    DIN EN 12921-1:2011-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements (includes Amendment A1:2010)
    EN 12757-1:2005+A1:2010 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing
    BGV A 8 : 2002
    BGI 503 : 2011
    BGR 190 : 2011
    BGR 157 : 2005
    EN 1953:2013 Atomising and spraying equipment for coating materials - Safety requirements
    EN 12021:2014 Respiratory equipment - Compressed gases for breathing apparatus
    DIN EN ISO 11890-2:2013-07 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
    DIN EN ISO 11890-1:2007-09 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 1: DIFFERENCE METHOD
    TRGS 440 : 2002 ERMITTELN UND BEURTEILEN DER GEFAEHRDUNGEN DURCH GEFAHRSTOFFE AM ARBEITSPLATZ: ERMITTELN VON GEFAHRSTOFFEN UND METHODEN ZUR ERSATZSTOFFPRUEFUNG
    DIN EN 12021:2014-07 RESPIRATORY EQUIPMENT - COMPRESSED GASES FOR BREATHING APPARATUS
    BGV B 3 : 1997
    EN ISO 11890-2:2013 PAINTS AND VARNISHES - DETERMINATION OF VOLATILE ORGANIC COMPOUND (VOC) CONTENT - PART 2: GAS-CHROMATOGRAPHIC METHOD (ISO 11890-2:2013)
    DIN EN 12921-2:2010-01 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 2: Safety of machines using water based cleaning liquids (includes Amendment A1:2008)
    EN 12921-4:2005+A1:2008 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents
    DIN EN 13966-1:2003-09 DETERMINATION OF THE TRANSFER EFFICIENCY OF ATOMISING AND SPRAYING EQUIPMENT FOR LIQUID COATING MATERIALS - PART 1: FLAT PANELS
    DIN EN 12921-3:2010-02 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids (includes Amendment A1:2008)
    EN 13966-1 : 2003 DETERMINATION OF THE TRANSFER EFFICIENCY OF ATOMISING AND SPRAYING EQUIPMENT FOR LIQUID COATING MATERIALS - PART 1: FLAT PANELS
    VDI 2280:2005-08 Requirements for discharge of organic solvents
    VDI 3455:2013-08 Emission control - High-volume car body painting plants
    VDMA 24366 : 1998 MASCHINEN UND ANLAGEN FUER DIE OBERFLAECHENTECHNIK - BESTIMMUNG DES AUFTRAGSWIRKUNGSGRADES FUER LACKZERSTAEUBER OHNE ELEKTROSTATISCHE UNTERSTUETZUNG
    DIN EN ISO 4618:2015-01 Paints and varnishes - Terms and definitions (ISO 4618:2014); Trilingual version EN ISO 4618:2014
    EN 13649:2001 Stationary source emissions - Determination of the mass concentration of individual gaseous organic compounds - Activated carbon and solvent desorption method
    BGR A1 : 2009
    EN ISO 3251:2008 Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008)
    VDI 3476 Blatt 1:2015-06 Waste gas cleaning - Methods of catalytic waste gas cleaning - Fundamentals
    BGR 133 : 2004 RULES FOR THE EQUIPMENT OF WORK PLACES WITH FIRE EXTINGUISHERS
    EN 13526:2001 Stationary source emissions - Determination of the mass concentration of total gaseous organic carbon in flue gases from solvent using processes - Continuous flame ionisation detector method
    EN 13725:2003/AC:2006 AIR QUALITY - DETERMINATION OF ODOUR CONCENTRATION BY DYNAMIC OLFACTOMETRY
    TRGS 602 : 1988 ERSATZSTOFFE UND VERWENDUNGSBESCHRAENKUNGEN - ZINKCHROMATE UND STRONTIUMCHROMAT ALS PIGMENTE FUER KORROSIONSSCHUTZ-BESCHICHTUNGSSTOFFE
    DIN EN 12921-4:2010-06 Machines for surface cleaning and pretreatment of industrial items using liquids and vapours - Part 4: Safety of machines using halogenated solvents (includes Amendment A1:2008)
    BGR 121 : 2004
    EN 15259:2007 Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
    BGR 231 : 2006
    EN 12215:2004+A1:2009 Coating plants - Spray booths for application of organic liquid coating materials - Safety requirements
    BGI 560 : 2010
    VDI 4220:2011-04 Quality assurance - Requirements on bodies for the determination of air pollutants at stationary sources and in ambient air
    VDI 3781 Blatt 4:2017-07 Environmental meteorology - Discharge conditions for exhaust gases - Small and medium combustion systems and other installations
    BGR 104 : 2014
    VDI 1000:2017-02 VDI Standardisation Work - Principles and procedures
    VDI 3481 Blatt 4:2007-02 Gaseous emission measurement - Measurement of the concentrations of total organic carbon and methane carbon using the flame ionisation detector (FID)
    EN 12921-1:2005+A1:2010 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 1: Common safety requirements
    ISO 11890-1:2007 Paints and varnishes — Determination of volatile organic compound (VOC) content — Part 1: Difference method
    EN 12753:2005+A1:2010 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements
    TRGS 400 : 2017
    TRGS 402 : 2010 AMD 2016 IDENTIFICATION AND ASSESSMENT OF THE RISKS FROM ACTIVITIES INVOLVING HAZARDOUS SUBSTANCES: INHALATION EXPOSURE
    DIN EN 14387:2008-05 Respiratory protective devices - Gas filter(s) and combined filter(s) - Requirements, testing, marking (includes Amendment A1:2008)
    EN 12921-3:2005+A1:2008 Machines for surface cleaning and pre-treatment of industrial items using liquids or vapours - Part 3: Safety of machines using flammable cleaning liquids
    DIN EN 13355:2010-06 COATING PLANTS - COMBINED BOOTHS - SAFETY REQUIREMENTS
    PREN 1539 : DRAFT 2012 DRYERS AND OVENS, IN WHICH FLAMMABLE SUBSTANCES ARE RELEASED - SAFETY REQUIREMENTS
    DIN EN 12753:2011-02 Thermal cleaning systems for exhaust gas from surface treatment equipment - Safety requirements (includes Amendment A1:2010)
    VDI 3674:2013-04 Waste gas cleaning by adsorption - Process gas and waste gas cleaning
    BGI 508 : 2005
    DIN EN 12757-1:2011-02 Mixing machinery for coating materials - Safety requirements - Part 1: Mixing machinery for use in vehicle refinishing (includes Amendment A1:2010)
    DIN EN 746-2:2011-02 Industrial thermoprocessing equipment - Part 2: Safety requirements for combustion and fuel handling systems
    DIN EN ISO 3251:2008-06 PAINTS, VARNISHES AND PLASTICS - DETERMINATION OF NON-VOLATILE MATTER CONTENT
    EN ISO 11890-1:2007 Paints and varnishes - Determination of volatile organic compound (VOC) content - Part 1: Difference method (ISO 11890-1:2007)
    ISO 4618:2014 Paints and varnishes — Terms and definitions
    DIN EN 13526:2002-05 STATIONARY SOURCE EMISSIONS - DETERMINATION OF THE MASS CONCENTRATION OF TOTAL GASEOUS ORGANIC CARBON IN FLUE GASES FROM SOLVENT USING PROCESSES - CONTINUOUS FLAME IONISATION DETECTOR METHOD
    VDI 3477:2016-03 Biological waste gas purification - Biofilters
    DIN EN 143:2007-02 Respiratory protective devices - Particle filters - Requirements, testing, marking (includes Corrigendum AC:2005 + Amendment A1:2006)
    VDI 4075 Blatt 2:2015-08 Cleaner production (PIUS) - Painting processes
    BGR 180 : 1992
    DIN EN 13725:2003-07 Air quality - Determination of odour concentration by dynamic olfactometry
    VDI 2066 Blatt 1:1975-10 Particulate matter measurement; measuring of particulate matter in flowing gases; gravimetric determination of dust load; fundamentals
    DIN EN 1953:2013-12 ATOMISING AND SPRAYING EQUIPMENT FOR COATING MATERIALS - SAFETY REQUIREMENTS
    EN 13355:2004+A1:2009 Coating plants - Combined booths - Safety requirements
    VDI 3478 Blatt 2:2008-04 Biological waste gas purification - Biological trickle bed-reactors
    TRGS 430 : 2009
    ISO 11890-2:2013 Paints and varnishes Determination of volatile organic compound (VOC) content Part 2: Gas-chromatographic method
    BGR 500 : SEP 2008
    VDI 3781 Blatt 2:1981-08 Dispersion of pollutants in the atmosphere; stack heights with regard to rugged terrain
    VDI 3478 Blatt 1:2011-03 Biological waste gas purification - Bioscrubbers
    DIN EN 15259:2008-01 Air quality - Measurement of stationary source emissions - Requirements for measurement sections and sites and for the measurement objective, plan and report
    DIN 55945:2016-08 PAINTS AND VARNISHES - ADDITIONAL TERMS AND DEFINITIONS TO DIN EN ISO 4618
    TRGS 403 : 1989
    EN ISO 4618:2014 Paints and varnishes - Terms and definitions (ISO 4618:2014)
    VDI 3462 Blatt 6:2009-03 Emission control - Wood machining and processing - Facility-specific measuring instructions
    BGV A 1 : 2008
    View more information

    • Access your standards online with a subscription

      Features

      • Simple online access to standards, technical information and regulations
      • Critical updates of standards and customisable alerts and notifications
      • Multi - user online standards collection: secure, flexibile and cost effective