VDI 4499 Blatt 4:2015-03
Current
Current
The latest, up-to-date edition.
Digital factory - Ergonomic representation of humans in the digital factory
Available format(s)
Hardcopy , PDF
Language(s)
German - English
Published date
01-03-2015
Publisher
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Preliminary note
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 Basics
5 Aspects of ergonomic analyses
6 Application examples
Bibliography
This section deals with the applications of ergo-nomic human models and the objectives they pur-sue.
| DocumentType |
Standard
|
| Pages |
54
|
| PublisherName |
Verlag des Vereins Deutscher Ingenieure
|
| Status |
Current
|
| Supersedes |
| VDI 4499 Blatt 3:2016-04 (Draft) | Digital Factory - Data management and system architectures |
| EN 1005-4:2005+A1:2008 | Safety of machinery - Human physical performance - Part 4: Evaluation of working postures and movements in relation to machinery |
| EN ISO 7250-1:2017 | Basic human body measurements for technological design - Part 1: Body measurement definitions and landmarks (ISO 7250-1:2017) |
| ISO 11226:2000 | Ergonomics — Evaluation of static working postures |
| DIN EN 1005-2:2009-05 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 2: MANUAL HANDLING OF MACHINERY AND COMPONENT PARTS OF MACHINERY |
| EN 894-3:2000+A1:2008 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators |
| DIN EN ISO 15536-1:2008-12 | ERGONOMICS - COMPUTER MANIKINS AND BODY TEMPLATES - PART 1: GENERAL REQUIREMENTS |
| EN 547-2:1996+A1:2008 | Safety of machinery - Human body measurements - Part 2: Principles for determining the dimensions required for access openings |
| ISO 11228-3:2007 | Ergonomics Manual handling Part 3: Handling of low loads at high frequency |
| DIN EN 547-2:2009-01 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 2: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR ACCESS OPENINGS |
| ISO 11228-2:2007 | Ergonomics — Manual handling — Part 2: Pushing and pulling |
| VDI 2209:2009-03 | 3D product modelling - Technical and organizational requirements - Procedures, tools, and applications - Cost-effective practical use |
| DIN 33411-1:1982-09 | Physical strenghts of man; concepts, interrelations, defining parameters |
| DIN EN 614-1:2009-06 | SAFETY OF MACHINERY - ERGONOMIC DESIGN PRINCIPLES - PART 1: TERMINOLOGY AND GENERAL PRINCIPLES |
| DIN 33402-1:2008-03 | ERGONOMICS - BODY DIMENSIONS OF PEOPLE - PART 1: TERMS AND DEFINITIONS, MEASURING PROCEDURES |
| ISO 14738:2002 | Safety of machinery — Anthropometric requirements for the design of workstations at machinery |
| EN 547-1:1996+A1:2008 | Safety of machinery - Human body measurements - Part 1: Principles for determining the dimensions required for openings for whole body access into machinery |
| EN 1005-2:2003+A1:2008 | Safety of machinery - Human physical performance - Part 2: Manual handling of machinery and component parts of machinery |
| EN 614-1:2006+A1:2009 | Safety of machinery - Ergonomic design principles - Part 1: Terminology and general principles |
| ISO 12100:2010 | Safety of machinery — General principles for design — Risk assessment and risk reduction |
| DIN EN ISO 7250-1:2016-05 (Draft) | BASIC HUMAN BODY MEASUREMENTS FOR TECHNOLOGICAL DESIGN - PART 1: BODY MEASUREMENT DEFINITIONS AND LANDMARKS (ISO 7250-1:2017) |
| DIN 33408-1:2008-03 | BODY TEMPLATES - PART 1: FOR SEATS OF ALL KINDS |
| DIN 33411-5:1999-11 | Physical strength of man - Part 5: Maximal isometric action forces, values |
| VDI 1000:2017-02 | VDI Standardisation Work - Principles and procedures |
| EN ISO 15536-1:2008 | Ergonomics - Computer manikins and body templates - Part 1: General requirements (ISO 15536-1:2005) |
| ISO 7250-1:2017 | Basic human body measurements for technological design — Part 1: Body measurement definitions and landmarks |
| EN 1005-5:2007 | Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency |
| DIN EN 1005-5:2007-05 | Safety of machinery - Human physical performance - Part 5: Risk assessment for repetitive handling at high frequency |
| DIN EN 894-3:2010-01 | Safety of machinery - Ergonomics requirements for the design of displays and control actuators - Part 3: Control actuators (includes Amendment A1:2008) |
| EN ISO 6385:2016 | Ergonomics principles in the design of work systems (ISO 6385:2016) |
| DIN EN 1005-4:2009-01 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 4: EVALUATION OF WORKING POSTURES AND MOVEMENTS IN RELATION TO MACHINERY |
| DIN EN 547-1:2009-01 | SAFETY OF MACHINERY - HUMAN BODY MEASUREMENTS - PART 1: PRINCIPLES FOR DETERMINING THE DIMENSIONS REQUIRED FOR OPENINGS FOR WHOLE BODY ACCESS INTO MACHINERY |
| EN ISO 12100:2010 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010) |
| ISO 12100-1:2003 | Safety of machinery Basic concepts, general principles for design Part 1: Basic terminology, methodology |
| ISO 9241-2:1992 | Ergonomic requirements for office work with visual display terminals (VDTs) — Part 2: Guidance on task requirements |
| EN 1005-3:2002+A1:2008 | Safety of machinery - Human physical performance - Part 3: Recommended force limits for machinery operation |
| VDI 3633 Blatt 6:2001-10 | Simulation of systems in materials handling, logistics and production - Representation of human resources in simulation models |
| DIN EN ISO 12100:2011-03 | Safety of machinery - General principles for design - Risk assessment and risk reduction (ISO 12100:2010); German version EN ISO 12100:2010 |
| VDI 2242 Blatt 2:1986-04 | Engineering design of products in accordance with ergonomics; work aids and relevant literature |
| ISO 15536-1:2005 | Ergonomics Computer manikins and body templates Part 1: General requirements |
| ISO 11228-1:2003 | Ergonomics Manual handling Part 1: Lifting and carrying |
| DIN EN 1005-3:2009-01 | SAFETY OF MACHINERY - HUMAN PHYSICAL PERFORMANCE - PART 3: RECOMMENDED FORCE LIMITS FOR MACHINERY OPERATION |
| NASA STD 3000 VOL 1 : 1995 | MAN-SYSTEMS INTEGRATION STANDARDS - VOLUME 1 |
| ISO 6385:2016 | Ergonomics principles in the design of work systems |
| SAE J826_201511 | Devices for Use in Defining and Measuring Vehicle Seating Accommodation |
| EN ISO 14738:2008 | Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002, including Cor 1:2003 and Cor 2:2005) |
| VDI 4499 Blatt 1:2008-02 | Digital factory - Fundamentals |
| DIN 33406:1988-07 | WORKPLACE DIMENSIONS IN PRODUCTION; TERMINOLOGY, TYPES AND DIMENSIONS OF WORKPLACES |
| DIN EN ISO 14738:2009-07 | Safety of machinery - Anthropometric requirements for the design of workstations at machinery (ISO 14738:2002 + Cor. 1:2003 + Cor. 2:2005) |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.