02/710617 DC : 0
Superseded
A superseded Standard is one, which is fully replaced by another Standard, which is a new edition of the same Standard.
View Superseded by
BS EN 14492-2 - CRANES - POWER DRIVEN WINCHES AND HOISTS - PART 2: POWER DRIVEN HOISTS
Hardcopy , PDF
31-01-2008
English
Important note : Users cannot be edited or removed once added to your Multi user PDF.
Foreword
Introduction
1 Scope
2 Normative references
3 Terms and definitions
4 List of significant hazards
5 Safety requirements and/or measures
5.1 General
5.2 Devices
5.3 Couplings
5.4 Brakes for hoisting movements
5.5 Gearbox
5.6 Load hooks
5.7 Rope drives
5.8 Chain drives
5.9 Belt drives
5.10 Pneumatic equipment
5.11 Hydraulic equipment
5.12 Trolleys
5.13 Electrical equipment of hoists and their trolleys
6 Verification of the safety requirements and/or measures
6.1 Hoists manufactured in series
6.2 Hoists designed individually
7 User information
7.1 General
7.2 Special requirements
7.3 Marking
Annex A (informative) Examples of power driven hoists
A.1 Wire rope hoist
A.2 Chain hoist
A.3 Belt hoist
A.4 Open winch
A.5 N G L Building Hoists - Treuil potence de chantier -
Bauaufzüge für nicht geführte lasten
Annex B (normative) Additional requirements when transporting
hot molten masses
Annex C (informative) Additional requirements for explosion
hazard areas
C.1 General
C.2 References to existing standards
C.3 Hazard sources in explosion hazard areas
C.4 User information
Annex D (informative) Additional requirements for operation
in aggressive environments and outdoors
D.1 General
D.2 Ropes and chains
Annex E (informative) Additional requirements for operation
at low temperatures
Annex F (normative) Supporting structures for NGL building
hoists
F.1 Definitions
F.2 Classification
F.3 Sizes
F.4 Maximum suspended load
F.5 Rated hoisting speed
F.6 Hoisting height
F.7 Construction characteristics
F.8 Calculations
F.9 Instructions
F.10 Verifications
Annex G (normative) Power driven series hoist mechanisms -
Test procedure for verification of the classification
G.1 Introduction
G.2 Application
G.3 Implementation of the test
G.4 Acceptance criteria
G.5 Figures
Annex H (informative) Bibliography
H.1 List of standards for mechanical strength of trolleys
H.2 List of standards for hooks
Annex I (Informative) Values of phi[IAL], phi[DAL] for different
types of rated capacity limiters (Examples)
Annex J (normative) Selection of motors
J.1 General
J.2 Criteria for motor selection (IEC 34-1)
J.3 Motors for vertical motions
J.4 Motors for horizontal motions
Annex ZA (Informative) Relationship of this European Standard
with EU Directives
BS EN 14492-2
| Committee |
MHE/3/6
|
| DocumentType |
Draft
|
| Pages |
112
|
| PublisherName |
British Standards Institution
|
| Status |
Superseded
|
| SupersededBy |
| Standards | Relationship |
| PREN 14492-2 : DRAFT 2016 | Identical |
| ISO 4308-1:2003 | Cranes and lifting appliances Selection of wire ropes Part 1: General |
| EN 418 : 1992 | SAFETY OF MACHINERY - EMERGENCY STOP EQUIPMENT, FUNCTIONAL ASPECTS - PRINCIPLES FOR DESIGN |
| EN 982:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Hydraulics |
| ISO 6336-2:2006 | Calculation of load capacity of spur and helical gears Part 2: Calculation of surface durability (pitting) |
| ISO 5598:2008 | Fluid power systems and components Vocabulary |
| PREN 13411-6 : DRAFT 1998 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 6: ASYMMETRIC WEDGE SOCKET CLEVIS |
| PREN 13411-4 : DRAFT 2009 | TERMINATIONS FOR STEEL WIRE ROPES - SAFETY - PART 4: METAL RESIN SOCKETING |
| ISO 606:2015 | Short-pitch transmission precision roller and bush chains, attachments and associated chain sprockets |
| EN 1050 : 1996 | SAFETY OF MACHINERY - PRINCIPLES FOR RISK ASSESSMENT |
| EN 292-1 : 1991 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - BASIC TERMINOLOGY, METHODOLOGY |
| PREN 13411-3 : DRAFT 1999 | TERMINATION FOR STEEL WIRE ROPES - SAFETY - PART 3 - FERRULE-SECURED EYES |
| ISO 6336-5:2016 | Calculation of load capacity of spur and helical gears Part 5: Strength and quality of materials |
| EN 563:1994/A1:1999/AC:2000 | SAFETY OF MACHINERY - TEMPERATURES OF TOUCHABLE SURFACES - ERGONOMICS DATA TO ESTABLISH TEMPERATURE LIMIT VALUES FOR HOT SURFACES |
| EN 60204-32:2008 | Safety of machinery - Electrical equipment of machines - Part 32: Requirements for hoisting machines |
| ISO 4309:2010 | Cranes Wire ropes Care and maintenance, inspection and discard |
| ISO 6336-1:2006 | Calculation of load capacity of spur and helical gears Part 1: Basic principles, introduction and general influence factors |
| EN 983:1996+A1:2008 | Safety of machinery - Safety requirements for fluid power systems and their components - Pneumatics |
| EN 954-1 : 1996 | SAFETY OF MACHINERY - SAFETY-RELATED PARTS OF CONTROL SYSTEMS - PART 1: GENERAL PRINCIPLES FOR DESIGN |
| EN 818-1:1996+A1:2008 | Short link chain for lifting purposes - Safety - Part 1: General conditions of acceptance |
| EN 292-2 : 91 AMD 1 95 | SAFETY OF MACHINERY - BASIC CONCEPTS, GENERAL PRINCIPLES FOR DESIGN - TECHNICAL PRINCIPLES AND SPECIFICATION |
| EN 60529:1991/AC:2016-12 | DEGREES OF PROTECTION PROVIDED BY ENCLOSURES (IP CODE) (IEC 60529 EDITION 2.2 CORRIGENDUM 2:2015) |
| ISO 4301-1:2016 | Cranes — Classification — Part 1: General |
| ISO 12482-1:1995 | Cranes Condition monitoring Part 1: General |
| EN 1070 : 1998 | SAFETY OF MACHINERY - TERMINOLOGY |
Access your standards online with a subscription
Features
-
Simple online access to standards, technical information and regulations.
-
Critical updates of standards and customisable alerts and notifications.
-
Multi-user online standards collection: secure, flexible and cost effective.