DIN 53214:1982-02
|
TESTING OF PAINTS AND VARNISHES; DETERMINATION OF RHEOGRAMS AND VISCOSITIES BY ROTATIONAL VISCOMETERS |
ISO 2811-1:2016
|
Paints and varnishes — Determination of density — Part 1: Pycnometer method |
EN 13687-3:2002
|
Products and systems for the protection and repair of concrete structures - Test methods - Determination of thermal compatibility - Part 3: Thermal cycling without de-icing salt impact |
EN ISO 3001 : 1999
|
PLASTICS - EPOXY COMPOUNDS - DETERMINATION OF EPOXY EQUIVALENT |
EN 24624 : 1992
|
PAINTS AND VARNISHES - PULL-OFF TEST |
ISO 813:2016
|
Rubber, vulcanized or thermoplastic Determination of adhesion to a rigid substrate 90 degree peel method |
EN ISO 2431:2011
|
Paints and varnishes - Determination of flow time by use of flow cups (ISO 2431:2011) |
ISO 3219:1993
|
Plastics — Polymers/resins in the liquid state or as emulsions or dispersions — Determination of viscosity using a rotational viscometer with defined shear rate |
EN ISO 1043-1:2011/A1:2016
|
PLASTICS - SYMBOLS AND ABBREVIATED TERMS - PART 1: BASIC POLYMER AND THEIR SPECIAL CHARACTERISTICS (ISO 1043-1:2011/AMD 1:2016) |
ISO 3001:1999
|
Plastics Epoxy compounds Determination of epoxy equivalent |
ISO 8503-2:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel — Comparator procedure |
EN ISO 2360:2017
|
Non-conductive coatings on non-magnetic electrically conductive base metals - Measurement of coating thickness - Amplitude-sensitive eddy-current method (ISO 2360:2017) |
ISO 2808:2007
|
Paints and varnishes Determination of film thickness |
EN 59:2016
|
Glass reinforced plastics - Determination of indentation hardness by means of a Barcol hardness tester |
EN ISO 527-2:2012
|
Plastics - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastics (ISO 527-2:2012) |
ISO 8130-2:1992
|
Coating powders Part 2: Determination of density by gas comparison pyknometer (referee method) |
EN ISO 2811-2:2011
|
Paints and varnishes - Determination of density - Part 2: Immersed body (plummet) method (ISO 2811-2:2011) |
EN 977:1997
|
Underground tanks of glass-reinforced plastics (GRP) - Method for one side exposure to fluids |
EN ISO 2409:2013
|
Paints and varnishes - Cross-cut test (ISO 2409:2013) |
EN ISO 178:2010/A1:2013
|
PLASTICS - DETERMINATION OF FLEXURAL PROPERTIES (ISO 178:2010/AMD 1:2013) |
DIN 61854-2:1987-04
|
TEXTILE GLASS - WOVEN GLASS FABRICS FOR PLASTICS REINFORCEMENT - WOVEN GLASS FILAMENT FABRIC AND WOVEN ROVING - TYPES |
EN ISO 2064 : 2000
|
METALLIC AND OTHER INORGANIC COATINGS - DEFINITIONS AND CONVENTIONS COVERING THE MEASUREMENT OF THICKNESS |
ISO 3882:2003
|
Metallic and other inorganic coatings — Review of methods of measurement of thickness |
EN ISO 527-1:2012
|
Plastics - Determination of tensile properties - Part 1: General principles (ISO 527-1:2012) |
EN ISO 3251:2008
|
Paints, varnishes and plastics - Determination of non-volatile-matter content (ISO 3251:2008) |
ISO 527-2:2012
|
Plastics — Determination of tensile properties — Part 2: Test conditions for moulding and extrusion plastics |
EN ISO 2811-1:2016
|
Paints and varnishes - Determination of density - Part 1: Pycnometer method (ISO 2811-1:2016) |
EN ISO 2811-3:2011
|
Paints and varnishes - Determination of density - Part 3: Oscillation method (ISO 2811-3:2011) |
EN ISO 3882:2003
|
Metallic and other inorganic coatings - Review of methods of measurement of thickness (ISO 3882:2003) |
IEC 60167:1964
|
Methods of test for the determination of the insulation resistance of solid insulating materials |
ISO 12944-1:2017
|
Paints and varnishes — Corrosion protection of steel structures by protective paint systems — Part 1: General introduction |
IEC 60093:1980
|
Methods of test for volume resistivity and surface resistivity of solid electrical insulating materials |
ISO 175:2010
|
Plastics Methods of test for the determination of the effects of immersion in liquid chemicals |
EN ISO 8503-1:2012
|
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces (ISO 8503-1:2012) |
EN ISO 8503-2:2012
|
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure (ISO 8503-2:2012) |
EN ISO 3219:1994
|
Plastics - Polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate (ISO 3219:1993) |
ISO 291:2008
|
Plastics Standard atmospheres for conditioning and testing |
ISO 2178:2016
|
Non-magnetic coatings on magnetic substrates Measurement of coating thickness Magnetic method |
ISO 2559:2011
|
Textile glass Mats (made from chopped or continuous strands) Designation and basis for specifications |
EN ISO 291:2008
|
Plastics - Standard atmospheres for conditioning and testing (ISO 291:2008) |
ISO 3251:2008
|
Paints, varnishes and plastics Determination of non-volatile-matter content |
ISO 4625:1980
|
Binders for paints and varnishes Determination of softening point Ring-and-ball method |
ISO 8503-1:2012
|
Preparation of steel substrates before application of paints and related products — Surface roughness characteristics of blast-cleaned steel substrates — Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive blast-cleaned surfaces |
ISO 2409:2013
|
Paints and varnishes Cross-cut test |
EN 1081:1998
|
Resilient floor coverings - Determination of the electrical resistance |
ISO 527-3:1995
|
Plastics Determination of tensile properties Part 3: Test conditions for films and sheets |
ISO 178:2010
|
Plastics Determination of flexural properties |
EN ISO 527-3:1995/AC:2002
|
PLASTICS - DETERMINATION OF TENSILE PROPERTIES - PART 3: TEST CONDITIONS FOR FILMS AND SHEETS |
ISO 2064:1996
|
Metallic and other inorganic coatings — Definitions and conventions concerning the measurement of thickness |
ISO 1629:2013
|
Rubber and latices — Nomenclature |
EN ISO 175:2010
|
Plastics - Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:2010) |
ISO 527-1:2012
|
Plastics Determination of tensile properties Part 1: General principles |
ISO 868:2003
|
Plastics and ebonite — Determination of indentation hardness by means of a durometer (Shore hardness) |
EN ISO 2178:2016
|
Non-magnetic coatings on magnetic substrates - Measurement of coating thickness - Magnetic method (ISO 2178:2016) |
ISO 2431:2011
|
Paints and varnishes Determination of flow time by use of flow cups |
ISO 4626:1980
|
Volatile organic liquids Determination of boiling range of organic solvents used as raw materials |