IEC 61954:2011+AMD1:2013+AMD2:2017 CSV
|
Static var compensators (SVC) - Testing of thyristor valves |
IEC 61800-3:2017
|
Adjustable speed electrical power drive systems - Part 3: EMC requirements and specific test methods |
IEC 60050-131:2002
|
International Electrotechnical Vocabulary (IEV) - Part 131: Circuit theory |
IEC 60146-1-3:1991
|
Semiconductor convertors - General requirements and line commutated convertors - Part 1-3: Transformers and reactors |
IEC 61000-6-4:2006+AMD1:2010 CSV
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-4: GENERIC STANDARDS - EMISSION STANDARD FOR INDUSTRIAL ENVIRONMENTS |
IEC 61287-1:2014
|
Railway applications - Power converters installed on board rolling stock - Part 1: Characteristics and test methods |
IEC TR 60146-6:1992
|
Semiconductor convertors - Part 6: Application guide for the protection of semiconductor convertors against overcurrent by fuses |
IEC 60664-4:2005
|
Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of high-frequency voltage stress |
IEC 61000-3-11 : 2.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-11: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS - EQUIPMENT WITH RATED CURRENT <= 75 A AND SUBJECT TO CONDITIONAL CONNECTION |
IEC TS 61287-2:2001
|
Power convertors installed on board railway rolling stock - Part 2: Additional technical information |
IEC 61000-2-4:2002
|
Electromagnetic compatibility (EMC) - Part 2-4: Environment - Compatibility levels in industrial plants for low-frequency conducted disturbances |
IEC 60050-195:1998
|
International Electrotechnical Vocabulary (IEV) - Part 195: Earthing and protection against electric shock |
IEC 62310-2:2006
|
Static transfer systems (STS) - Part 2: Electromagnetic compatibility (EMC) requirements |
IEC 60050-601:1985
|
International Electrotechnical Vocabulary (IEV) - Part 601: Generation, transmission and distribution of electricity - General |
IEC 60050-151:2001
|
International Electrotechnical Vocabulary (IEV) - Part 151: Electrical and magnetic devices |
IEC 62040-1-1:2002
|
Uninterruptible power systems (UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas |
IEC 60050-441:1984
|
International Electrotechnical Vocabulary (IEV) - Part 441: Switchgear, controlgear and fuses |
IEC PAS 61975:2004
|
System tests for high-voltage direct current (HVDC) installations |
IEC 61000-6-1 : 3.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-1: GENERIC STANDARDS - IMMUNITY STANDARD FOR RESIDENTIAL, COMMERCIAL AND LIGHT-INDUSTRIAL ENVIRONMENTS |
IEC 62068-1:2003
|
Electrical insulation systems - Electrical stresses produced by repetitive impulses - Part 1: General method of evaluation of electrical endurance |
IEC 61000-3-12:2011
|
Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current >16 A and ≤ 75 A per phase |
IEC 62310-1:2005
|
Static transfer systems (STS) - Part 1: General and safety requirements |
IEC 62103:2003
|
Electronic equipment for use in power installations |
IEC 60050-551:1998
|
International Electrotechnical Vocabulary (IEV) - Part 551: Power electronics |
IEC 60364-1:2005
|
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics, definitions |
IEC 61204-3:2016
|
Low-voltage switch mode power supplies - Part 3: Electromagnetic compatibility (EMC) |
IEC 61000-6-3:2006+AMD1:2010 CSV
|
Electromagnetic compatibility (EMC) - Part 6-3: Generic standards - Emission standard for residential, commercial and light-industrial environments |
IEC 62040-2:2016
|
Uninterruptible power systems (UPS) - Part 2: Electromagnetic compatibility (EMC) requirements |
IEC 62040-1-2:2002
|
Uninterruptible power systems (UPS) - Part 1-2: General and safety requirements for UPS used in restricted access locations |
IEC 60050-101:1998
|
International Electrotechnical Vocabulary (IEV) - Part 101: Mathematics |
IEC 60700-1:2015
|
Thyristor valves for high voltage direct current (HVDC) power transmission - Part 1: Electrical testing |
IEC TS 61000-6-5:2001
|
Electromagnetic compatibility (EMC) - Part 6-5: Generic standards - Immunity for power station and substation environments |
IEC 60076-1:2011
|
Power transformers - Part 1: General |
IEC 60146-2:1999
|
Semiconductor converters - Part 2: Self-commutated semiconductor converters including direct d.c. converters |
IEC TS 61000-3-4:1998
|
Electromagnetic compatibility (EMC) - Part 3-4: Limits - Limitation of emission of harmonic currents in low-voltage power supply systems for equipment with rated current greater than 16 A |
IEC 60747-1:2006+AMD1:2010 CSV
|
Semiconductor devices - Part 1: General |
IEC 60439-1:1999+AMD1:2004 CSV
|
Low-voltage switchgear and controlgear assemblies - Part 1: Type-tested and partially type-tested assemblies |
IEC 61000-2-2:2002+AMD1:2017 CSV
|
Electromagnetic compatibility (EMC) - Part 2-2: Environment - Compatibility levels for low-frequency conducted disturbances and signalling in public low-voltage power supply systems |
IEC 60664-5:2007
|
Insulation coordination for equipment within low-voltage systems - Part 5: Comprehensive method for determining clearances and creepage distances equal to or less than 2 mm |
IEC 61378-2:2001
|
Convertor transformers - Part 2: Transformers for HVDC applications |
IEC 60050-321:1986
|
International Electrotechnical Vocabulary (IEV) - Part 321: Instrument transformers |
IEC 61000-4-7:2002+AMD1:2008 CSV
|
Electromagnetic compatibility (EMC) - Part 4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto |
IEC 61000-3-3 : 3.0EN+(REDLINE+VERSION)
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-3: LIMITS - LIMITATION OF VOLTAGE CHANGES, VOLTAGE FLUCTUATIONS AND FLICKER IN PUBLIC LOW-VOLTAGE SUPPLY SYSTEMS, FOR EQUIPMENT WITH RATED CURRENT <= 16 A PER PHASE AND NOT SUBJECT TO CONDITIONAL CONNECTION |
IEC 60664-3:2016
|
Insulation coordination for equipment within low-voltage systems - Part 3: Use of coating, potting or moulding for protection against pollution |
IEC 60146-3:1977
|
Semiconductor convertors. Part 3: Semiconductor direct d.c. convertors (d.c. chopper convertors) |
IEC 61180-1:1992
|
High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements |
IEC 61140:2016
|
Protection against electric shock - Common aspects for installation and equipment |
IEC 60050-521:2002
|
International Electrotechnical Vocabulary (IEV) - Part 521: Semiconductor devices and integrated circuits |
IEC 60071-1:2006+AMD1:2010 CSV
|
Insulation co-ordination - Part 1: Definitions, principles and rules |
IEC 61204-7:2016 EXV
|
LOW-VOLTAGE SWITCH MODE POWER SUPPLIES - PART 7: SAFETY REQUIREMENTS |
IEC 61000-6-2 : 3.0:2016
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 6-2: GENERIC STANDARDS - IMMUNITY STANDARD FOR INDUSTRIAL ENVIRONMENTS |
IEC 60664-1:2007
|
Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests |
IEC 61378-1:2011
|
Converter transformers - Part 1: Transformers for industrial applications |
IEC 61000-3-2 : 4.0
|
ELECTROMAGNETIC COMPATIBILITY (EMC) - PART 3-2: LIMITS - LIMITS FOR HARMONIC CURRENT EMISSIONS (EQUIPMENT INPUT CURRENT <= 16 A PER PHASE) |